RIP SAW
ID: W911S226U2253Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QM MICC-FT DRUMFORT DRUM, NY, 13602-5220, USA

NAICS

Sawmill, Woodworking, and Paper Machinery Manufacturing (333243)

PSC

SAWS AND FILING MACHINES (3405)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/workspace/contract/opp/d04f041d68ae4b21bde87f17d49e042d/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of a Diehl Machines SL65-56 WA Wide-Arm Straight Line Rip Saw, as outlined in a Combined Synopsis/Solicitation. This equipment is essential for woodworking operations, featuring specifications such as a 56-inch throat clearance, a 20HP belt-driven saw arbor motor, and an automatic electro-pneumatic feed chain lubrication system, among other advanced features. The rip saw will be utilized at the McAlester Army Ammunition Plant in Oklahoma, highlighting its importance in supporting military logistics and operations. Interested vendors, particularly small businesses, should contact David Fortune at david.c.fortune.civ@army.mil or call 918-420-6445 for further details and to ensure compliance with the Total Small Business Set-Aside requirements.

    Point(s) of Contact
    David Fortune
    (918) 420-6445
    david.c.fortune.civ@army.mil
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    RIP SAW
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    BLOCK SAW
    Buyer not available
    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of a CAPE Woodworking Machinery Carousel Block Saw Model TC10, which is essential for cutting blocks for pallets. This fully mechanical, automatic carousel-type block-cutter machine must meet specific operational requirements, including a production capacity of approximately 3,500 blocks per hour and the ability to automatically separate sawn blocks from trim and waste cuts. The procurement is set aside for small businesses under the SBA guidelines, and interested vendors should contact David Fortune at david.c.fortune.civ@army.mil or by phone at 918-420-6445 for further details. The place of performance is the McAlester Army Ammunition Plant in McAlester, OK.
    Watervliet Arsenal - Sheet Metal Shear
    Buyer not available
    The Department of Defense, specifically the Army's Watervliet Arsenal, is seeking proposals from qualified small businesses to supply a hydraulic sheet metal shear. The procurement involves one unit of a hydraulic shear with a shearing length of 52 inches, requiring a 3-phase 220V, 15HP power supply, with specifications matching Baileigh Industrial Holdings Part BA9-1007087 or an equivalent product. This equipment is crucial for the arsenal's manufacturing operations, emphasizing the importance of quality and timely delivery, as past performance will significantly influence the evaluation process. Interested vendors must submit their quotes electronically and adhere to various compliance requirements, including security policies and reporting obligations, with inquiries directed to Stephanie Webster at stephanie.a.webster8.civ@army.mil or by phone at 518-266-4368.
    SCREW
    Buyer not available
    The Department of Defense, specifically the Department of the Army, is seeking qualified vendors to supply machine screws under a total small business set-aside contract. The procurement aims to fulfill the need for screws, which are critical components in various military applications and equipment. The place of performance for this contract is located at 1 C Tree Rd, McAlester, OK 74501, and interested parties can reach out to Kortny Blanks at kortny.l.blanks.civ@army.mil or by phone at 918-420-7118 for further details. The solicitation is categorized under NAICS code 332722, which pertains to Bolt, Nut, Screw, Rivet, and Washer Manufacturing.
    11K FORKLIFT
    Buyer not available
    The Department of Defense, specifically the Department of the Army, is seeking proposals for the procurement of an 11K CAB Forklift equipped with foam-filled tires, hydraulic adjustable forks, and heating and air conditioning capabilities. This procurement includes a requirement for the trade-in of a Sellick forklift with 429.2 hours on the dash, emphasizing the need for a reliable material handling solution. The forklift will be utilized for various logistical operations at Fort Riley, KS, highlighting its importance in supporting military readiness and efficiency. Interested small businesses are encouraged to reach out to Jevon Schroeder at jevon.k.schroeder2.civ@army.mil or call 1-520-945-4524 for further details, as this opportunity is set aside for total small business participation under FAR 19.5.
    OUTDOOR AIR COMPRESSORS
    Buyer not available
    The Department of Defense, specifically the Department of the Army, is seeking qualified vendors to provide outdoor air compressors, specifically the Ingersoll Rand RS30i-A25 or an equivalent model. The procurement requires a fixed-speed rotary screw air compressor with a power rating of 40 HP, standard efficiency, and a capacity of 184 CFM at 125 PSI, along with various modifications for outdoor use, including weather protection and low/high ambient packages. This equipment is crucial for operations at the McAlester Army Ammunition Plant in Oklahoma, ensuring reliable air supply under varying environmental conditions. Interested small businesses should contact David Fortune at david.c.fortune.civ@army.mil or call 918-420-6445 for further details, as this opportunity is set aside for total small business participation under FAR 19.5.
    Coordinate Measuring Machines
    Buyer not available
    The Department of Defense, specifically the Department of the Army, is seeking proposals for the replacement of two Advanced Industrial Measurement Systems (AIMS) Metrology Coordinate Measuring Machines located at the Anniston Army Depot. This procurement falls under the category of Electronic and Precision Equipment Repair and Maintenance, highlighting the importance of precision measurement in military operations and equipment maintenance. The opportunity is set aside for small businesses, and interested parties can reach out to Johnny Stewart at johnny.stewart2.civ@army.mil or call 571-588-0971 for further details. The solicitation is part of a total small business set-aside under FAR 19.5, emphasizing the commitment to supporting small business participation in federal contracting.
    Shear Maintenance and Repair
    Buyer not available
    The Department of Defense, specifically the Naval Supply Systems Command Fleet Logistics Center Jacksonville, is soliciting proposals for the maintenance and repair of the AS 500-14 Shear Machine located at the Naval Construction Training Center in Gulfport, Mississippi. The contract entails critical maintenance tasks, including the replacement of cutting blades and a damaged clamp down cylinder, under a Firm Fixed Price Agreement with a service commencement timeline of 45 days post-award. This procurement is vital for ensuring the operational efficiency of military equipment, emphasizing the importance of quality and reliability in the services provided. Interested small businesses, particularly those that are veteran-owned or meet specific socio-economic classifications, should direct inquiries to Dylan Douglas at dylan.l.douglas.civ@us.navy.mil or Robert Edwards at robert.s.edwards42.civ@us.navy.mil, with past performance questionnaires due by December 12, 2024.
    53--ARM DOG
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of an ARM DOG, identified by NSN 5340014851703. The requirement includes a single unit to be delivered to the Puget Sound Naval Shipyard within five days after the order is placed. This hardware item is critical for military applications, emphasizing the importance of timely and reliable supply in support of defense operations. Interested vendors are encouraged to submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation will not be available.
    HD RNG REMOVAL TOOL
    Buyer not available
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting proposals for the HD RNG Removal Tool, categorized under the NAICS code 332216 for Saw Blade and Handtool Manufacturing. This procurement involves the supply of hand tools that are non-edged and non-powered, which are critical for various military applications. The contract will include specific requirements for inspection, acceptance, and quality assurance, with a focus on compliance with military specifications and standards. Interested vendors should direct inquiries to Melissa Furness at 771-229-0075 or via email at MELISSA.FURNESS@NAVY.MIL, and are advised that pricing must remain valid for 60 days post-quotation submission.
    10--DECKEL,GRIFFBAUGRU
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA) Land and Maritime, is seeking quotes for the procurement of DECKEL, GRIFFBAUGRU, with National Stock Number (NSN) 1005123802000. The requirement includes a quantity of 244 units, with delivery expected within 120 days after order placement, and the potential for an Indefinite Delivery Contract (IDC) lasting one year or until the total order value reaches $350,000. This procurement is crucial for maintaining the operational readiness of military equipment, as the items will be shipped to various DLA depots both within the continental United States (CONUS) and outside (OCONUS). Interested vendors must submit their quotes electronically, and any inquiries should be directed to the DLA via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.