Autoquip Scissor Lift
ID: F1HTRS4232AW01Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA4686 9 CONS PKPBEALE AFB, CA, 95903-1702, USA

NAICS

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing (333924)

PSC

AIRCRAFT GROUND SERVICING EQUIPMENT (1730)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/45e53c8af2bd402fa326d367ce2162af/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Air Force, is seeking to procure an Autoquip Scissor Lift (model 36S25-TH) through a combined synopsis/solicitation process. This equipment is essential for the 940 Maintenance Squadron to safely lower, stow, and raise the aircraft refueling boom, ensuring compliance with various safety standards including ANSI and OSHA regulations. The scissor lift, with a maximum capacity of 1,500 lbs and a raised height of 144 inches, plays a critical role in maintaining safety and efficiency during maintenance operations. Interested small businesses must submit their quotes by September 9, 2024, and can direct inquiries to TSgt Paul Castillo at paul.castillo.7@us.af.mil.

    Point(s) of Contact
    Paul Castillo
    paul.castillo.7@us.af.mil
    Jonathan Clark
    (530) 634-3411
    jonathan.clark.37@us.af.mil
    Files
    Title
    Posted
    1. Statement of Need (SON).pdf
    The 940 Maintenance Squadron of the Air Force Reserve Command is requesting the acquisition of an Autoquip brand Scissor Lift (model 36S25-TH) to facilitate safe maintenance and inspections of the aircraft refueling boom. This equipment is essential for the safe lowering, stowing, and raising of the boom, with specific technical requirements outlined for functionality and compliance. The lift's maximum capacity is 1,500 lbs, with a raised height of 144 inches and a lowered height of 36 inches. The document specifies compliance with various safety standards including ANSI and OSHA regulations. The anticipated delivery timeframe for the equipment is within 90 days following purchase approval. For further inquiries, contact TSgt Paul Castillo at the provided email address. This request highlights the Air Force's commitment to maintaining safety and efficiency in critical maintenance operations.
    Autoquip Scissor Lift RFI Log.docx
    The document pertains to a Request for Quotation (RFQ) for an Autoquip Scissor Lift, identified by the reference F1HTRS4232AW01. It clarifies that the solicitation is for the procurement of the lift, not for rental purposes. A specific query regarding the rental period was addressed, confirming that rental is not applicable to this request. This RFQ is part of the federal government's procurement process, focusing on acquiring necessary equipment to fulfill operational requirements. Ensuring clarity in the procurement process is essential for meeting the needs laid out in government contracts, underscoring the importance of accurate specifications and understanding of terms involved.
    Autoquip Scissor Lift RFQ.pdf
    The Department of the Air Force is issuing a Request for Quote (RFQ) for a firm-fixed price contract for an Autoquip Scissor Lift at Beale Air Force Base in California. This RFQ targets 100% small business participation and is prepared under the guidelines of FAR Subpart 12.6. Interested vendors must submit quotes by September 9, 2024, and be registered in the System for Award Management (SAM) with a Unique Entity Identifier (UEI). The applicable NAICS code is 333924, and the Product Service Code (PSC) is 1730. Offerors must provide pricing, delivery timelines, and documentation verifying small business status, tax identification numbers, and SAM registration. Evaluation criteria prioritize pricing and technical acceptability according to the Statement of Need (SoN). Specific clauses incorporated by reference further detail compliance requirements, including representations and certifications related to business operations and ethical standards. The solicitation includes extensive regulations governing contractor responsibilities, eligibility, and operational conduct, adhering to federal acquisition guidelines. This procurement process not only aims to secure necessary equipment but also demonstrates the Air Force's commitment to fostering small business engagement in federal contracting.
    Scissor Lift - Brand Name Justification - Redacted.pdf
    The provided document appears to be an error message related to an inability to display the contents of a PDF file concerning federal government RFPs, federal grants, and state/local RFPs. It suggests upgrading to the latest version of Adobe Reader for proper viewing and offers links for assistance. Unfortunately, without the actual content of the file, it is impossible to extract key ideas, main topics, or any supporting details integral to summarizing its purpose. The document's primary significance lies in its relevance to accessing government-related funding opportunities, but specifics on projects, deadlines, or terms cannot be analyzed or summarized due to the lack of information. Therefore, while the document pertains to government procurement processes, the lack of substantive content prevents any meaningful summary or analysis.
    Lifecycle
    Title
    Type
    Autoquip Scissor Lift
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    RFQ - 36 MSG/ DET 1 (Diego Garcia) – Vehicle Lifts (2-Post with 30k lbs Lift Capacity and 4-Post with 60k Lift Capacity) - Andersen AFB, Guam
    Active
    Dept Of Defense
    The Department of Defense, through the Department of the Air Force, is soliciting quotes for the procurement of vehicle lifts to be delivered to Andersen Air Force Base in Diego Garcia. The requirement includes two hydraulic two-post vehicle lifts with a capacity of 30,000 lbs and two heavy-duty four-post vehicle lifts with a capacity of 60,000 lbs, essential for conducting maintenance on mission-critical equipment. These lifts will replace outdated and damaged equipment, thereby enhancing operational readiness and supporting various tenant units on the island. Interested vendors must submit their proposals by September 20, 2024, at 11:00 A.M. Chamorro Standard Time, and can contact Louella Navarrete at louella.navarrete@us.af.mil or TSgt Benjamin Albers at Benjamin.albers@us.af.mil for further information.
    Single Man Lifts
    Active
    Dept Of Defense
    Presolicitation DEPT OF DEFENSE DEPT OF THE AIR FORCE is seeking a "Single Man Lift" as a 100% small business set aside requirement. The service/item being procured is a type of lift equipment used for lifting a single person to perform tasks at elevated heights. The place of performance is Carlton Lndg, Oklahoma, United States. The procurement is a Firm Fixed Price and the delivery location is Tinker AFB OK. Please note that no quotes can be accepted until the Solicitation has been posted.
    High Capacity Boom Lifts
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking bids for the procurement of various high-capacity boom lifts to be delivered to the Anniston Army Depot in Alabama. The requirement includes two telescopic hi-capacity boom lifts, two hi-capacity articulating boom lifts, two electric boom lifts, two electric scissor lifts, and one drivable vertical mast lift, along with necessary technical literature and training for operation and maintenance. These lifts are crucial for supporting military operations and ensuring safety and efficiency in material handling tasks at the depot. Interested contractors must submit their bids electronically by the extended deadline of October 17, 2024, and can direct inquiries to primary contact Sara B. Young at sara.b.young.civ@army.mil or secondary contact Larry Stephney at larry.d.stephney.civ@army.mil.
    15--ELEVATOR,AIRCRAFT
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking quotes for the procurement of aircraft elevators, specifically NSN 1560016423875. The solicitation includes two line items: four units to be delivered to DLA Distribution Warner Robins within 166 days after order (ADO) and nine units under similar delivery conditions. These aircraft elevators are critical components used in aerospace applications, ensuring the functionality and safety of aircraft operations. Interested vendors must submit their quotes electronically, as hard copies will not be provided, and inquiries can be directed to the buyer via email at DibbsBSM@dla.mil.
    Trailer, Height-Adjustable for Transport of Aircraft Jacks on Flight Line
    Active
    Dept Of Defense
    The Department of Defense, specifically the 115th Fighter Wing in Madison, Wisconsin, is seeking quotes for a height-adjustable trailer designed for the efficient loading and transportation of aircraft jacks on the flight line. The procurement aims to acquire the Wing Jack Trailer Model EPT2-220 or an equivalent, which is crucial for enhancing operational efficiency by allowing a single operator to safely transport multiple aircraft jacks while minimizing wear and tear. This trailer is intended solely for use on the flight line, emphasizing the importance of optimizing ground operations within military aviation. Interested vendors must submit their quotes by September 19, 2024, at 1:00 PM CDT, and should contact Scott Homner at scott.homner@us.af.mil for further inquiries. The solicitation is set aside for small businesses under NAICS code 336212, with a size standard of 1,000 employees.
    17--MAINTENANCE PLATFOR
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of 30 units of Maintenance Platforms under solicitation number NSN 1730015724242. This procurement is specifically set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) and falls under the NAICS code 333519, which pertains to Rolling Mill and Other Metalworking Machinery Manufacturing. The Maintenance Platforms are critical for aerospace craft launching, landing, ground handling, and servicing operations, emphasizing their importance in military logistics and support. Interested vendors must submit their quotes electronically, as hard copies will not be provided, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil. The deadline for quote submission is 157 days after the award date.
    Solicitation for LIFTING MECHANISM NSN: 2590-01-277-0060
    Active
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command – Detroit (ACC-DTA), is soliciting proposals for a firm-fixed price contract to procure Lifting Mechanisms, identified by NSN 2590-01-277-0060 and part number 13228E5988. This procurement is set aside exclusively for small businesses and includes specific requirements for packaging, inspection, and preservation in compliance with military standards, as outlined in the associated Special Packaging Instructions. The Lifting Mechanism is crucial for military operations, ensuring the integrity and readiness of equipment during transport. Interested vendors must submit their proposals electronically by the specified deadline and are encouraged to contact Justine Broughton at justine.r.broughton.civ@army.mil or 571-588-9034 for further information.
    Purchase and Installation of Hoists
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking qualified contractors for the purchase and installation of two 5-ton electrical hoists at Joint Base San Antonio - Randolph. The project requires the contractor to inspect and certify the existing hoist rail system to ensure it can support the new hoists, with work to be conducted during normal business hours while the hangar remains occupied. This procurement is crucial for maintaining operational efficiency and safety in maintenance operations within the hangar. Interested vendors must submit their quotes electronically by September 23, 2024, and are required to register with the System for Award Management (SAM) to be eligible. For further inquiries, potential bidders can contact Kailah Kraus at kailah.kraus@us.af.mil or Ericka L. McGlone at ericka.mcglone@us.af.mil.
    Supply & Install Vehicle Lift
    Active
    Agriculture, Department Of
    The U.S. Department of Agriculture's Forest Service is seeking qualified contractors to supply and install a 30,000 lb., four-post vehicle lift at the Fremont-Winema National Forest Fleet Program facility in Lakeview, Oregon. This procurement aims to equip the newly relocated agency vehicle repair shop, which currently lacks this essential equipment, thereby enhancing the operational capabilities of the Forest Service fleet. The contractor must provide an ALI-certified lift that meets specific spatial constraints and handle all necessary permits and certifications, with a performance period from September 24, 2024, to December 31, 2024. Interested parties must submit their quotes and supporting documentation to the Contracting Officer, Chad Schmele, by 12:00 p.m. Pacific Time on September 23, 2024, via email at chad.schmele@usda.gov.
    39--HOIST,MANUAL
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of nine manual hoists (NSN 3950011625452) under a total small business set-aside. The successful contractor will be responsible for delivering these hoists to the DLA Distribution Depot Hill within 146 days after order placement. These materials handling equipment items are crucial for various military operations and logistics support. Interested vendors must submit their quotes electronically, as hard copies will not be available, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil.