TSC IIJA 8560 CNC MILL AND LATHE
ID: 140R8125Q0211Type: Solicitation
Overview

Buyer

INTERIOR, DEPARTMENT OF THEBUREAU OF RECLAMATIONDENVER FED CENTERDENVER, CO, 80225, USA

NAICS

Machine Tool Manufacturing (333517)

PSC

MILLING MACHINES (3417)

Original Source

https://sam.gov/opp/8599044a12844d28bc5c2aa51d94e38a/view
Timeline
    Description

    The Department of the Interior, specifically the Bureau of Reclamation, is soliciting proposals for the procurement of a Computer Numeric Control (CNC) mill and lathe, designated as TSC IIJA 8560. This procurement aims to replace existing manual equipment at the Hydraulics Laboratory in Denver, Colorado, and includes the supply, delivery, installation, and on-site calibration of one TM-2P milling machine and one TL-2 lathe, with an expected delivery date of December 31, 2025. The CNC mill and lathe are critical for enhancing operational efficiency and precision in government operations, adhering to federal acquisition regulations and promoting participation from small businesses, including service-disabled veteran-owned and women-owned enterprises. Interested vendors must submit their proposals by July 28, 2025, and can direct inquiries to Evonne Huggins at ehuggins@usbr.gov or by phone at 720.879.7965.

    Point(s) of Contact
    Huggins, Evonne
    (720) 879-7965
    ehuggins@usbr.gov
    Files
    Title
    Posted
    Combined_Synopsis_Solicitation_Mill_and_Lathe_July_25.pdf
    The Bureau of Reclamation's Request for Quotation (RFQ) 140R8125Q0211 seeks offers for a Computer Numeric Control (CNC) mill and lathe to replace existing manual equipment at the Hydraulics Laboratory in Denver, Colorado. The procurement encompasses the supply, delivery, and installation, including on-site calibration and start-up services for both machines by December 31, 2025. The CNC mill must meet specific requirements such as a 40”x16”x16” bed travel, a 10-station tool changer, and high-speed machining capabilities, while the lathe must accommodate a maximum cut diameter of 16” and include a rigid tapping feature. All quotes must be submitted on company letterhead and include warranty details as per outlined provisions. Responses are due by July 28, 2025, and further inquiries can be directed to the contact person provided. This solicitation also references various contractual clauses and compliance requirements, emphasizing the procurement's alignment with federal regulations, particularly relating to small business participation and cybersecurity considerations.
    Sol_140R8125Q0211.pdf
    This document is a Request for Proposal (RFP) issued by the Bureau of Reclamation, focusing on the procurement of specific commercial items, namely a Computer Numeric Control (CNC) mill and lathe. The RFP details the solicitation number (140R8125Q0211), submission date, and various administrative codes pertinent to the bid process. The procurement includes one unit each of TM-2P milling machines and TL-2 lathes, with an expected delivery date of December 31, 2025, and a performance period from August 1, 2025, to December 31, 2025. The document also indicates that the project is aimed at supporting government operations, following guidelines set forth by federal acquisition regulations. It specifies various classifications to encourage participation from small businesses, including service-disabled veteran-owned and women-owned businesses. The overall intent is to secure quality equipment while emphasizing compliance with government standards and regulations. The contracting process will ensure that interested vendors submit their offers according to outlined instructions and timelines.
    Lifecycle
    Title
    Type
    TSC IIJA 8560 CNC MILL AND LATHE
    Currently viewing
    Solicitation
    Similar Opportunities
    24-13-1027 CNC UNIVERSAL MILLING MACHINE
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one DMC 270 FD Portal Series CNC Universal Milling Machine, as outlined in solicitation SPE4A8-25-R-0008. The updated requirements include significant enhancements such as an upgraded Siemens Sinumerik One CNC controller, increased spindle power from 40 horsepower to 56 horsepower, and the addition of safety features including grating and support structures in compliance with OSHA standards. This machine is critical for various manufacturing processes, including milling, turning, and profile grinding, and the contract is expected to be awarded following the extended closing date of December 23, 2025. Interested vendors should direct inquiries to Christina Gibbs at christina.gibbs@dla.mil.
    Purchase of Turbine Runner for Unit A9
    Interior, Department Of The
    The Bureau of Reclamation, part of the U.S. Department of the Interior, is soliciting proposals for the purchase of a vertical Francis turbine runner for Unit A9 at the Hoover Dam Office, under solicitation number 140R3025R0023. The procurement includes requirements for hydraulic design, model testing, and the fabrication of the turbine runner and associated components, emphasizing high efficiency and specific operational characteristics. This project is critical for maintaining the operational integrity of the Hoover Powerplant, which plays a vital role in energy generation and water management in the region. Proposals are due by January 9, 2026, with inquiries directed to Virginia Toledo at vtoledo@usbr.gov or by phone at 928-343-8136.
    34--MILLING MACHINE,HOR
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of a horizontal milling machine (NSN 3417012681552) intended for delivery to the USS Gerald R. Ford (CVN 78). The contract is set aside for small businesses under the Total Small Business Set-Aside program, emphasizing the importance of supporting small enterprises in defense contracting. This milling machine is crucial for various metalworking applications within military operations, ensuring the readiness and maintenance of naval vessels. Interested vendors must submit their quotes electronically, as hard copies will not be available, and all inquiries should be directed to the primary contact at DibbsBSM@dla.mil.
    Intent to Sole Source - Prototrak 1845RX CNC Lathe
    Dept Of Defense
    The Department of Defense, specifically the Air Force Life Cycle Management Center (AFLCMC), intends to award a sole source contract for the procurement of a Prototrak 1845RX CNC Lathe for the Air Force Institute of Technology (AFIT) located at Wright-Patterson AFB, Ohio. The lathe must meet specific technical requirements, including an 18-inch swing over bed, a 10 HP spindle motor, and a Prototrak RLX touchscreen controller, along with necessary accessories and a two-year warranty. This equipment is crucial for enhancing the capabilities of AFIT in machining operations, and the contract will be awarded to Charles Jones Machinery Inc., the only known source capable of fulfilling these requirements. Interested parties may submit capability statements or inquiries to Bryson Pennie and Linh Jameson via email by 12:00 pm Local Time on December 18, 2025, to be considered for any potential competitive procurement.
    34--LATHE,ENGINE
    Dept Of Defense
    The Defense Logistics Agency (DLA Troop Support) is seeking quotes for the procurement of an Engine Lathe, identified by NSN 3416012311788. The requirement includes the delivery of one unit to DLA Distribution San Diego within 167 days after order placement, with approved sources specified for the procurement. Engine lathes are critical for various metalworking applications, supporting the operational readiness of military equipment. Interested small businesses are encouraged to submit their quotes electronically, as hard copies of the solicitation will not be available, and inquiries can be directed to the buyer via email at DibbsBSM@dla.mil.
    Soraluce FLP 4000 Universal Floor Type 6-Axis Milling Center outfitted with the Soraluce Dynamics Active Stabilizer Plus (DAS+) or equivalent 6-Axis Universal Floor Type Milling Center with active dampening system equivalent to the DAS+.
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is conducting market research to identify vendors capable of supplying a Soraluce FLP 4000 Universal Floor Type 6-Axis Milling Center equipped with the Soraluce Dynamics Active Stabilizer Plus (DAS+) or an equivalent system. This procurement includes not only the milling center but also comprehensive turnkey services such as installation, removal of existing equipment, foundation work, shipping, tooling, training, and technical documentation. The equipment will be utilized at the Fleet Readiness Center-EAST in Cherry Point, North Carolina, highlighting its significance in supporting military readiness and operational capabilities. Interested parties are encouraged to submit their capabilities by emailing avnipemarketresearch@dla.mil, with responses due by the closing date of the SAM.gov posting, as this is a sources sought notice and not a formal solicitation.
    34--DRILLING MACHINE,UP
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of two drilling machines under solicitation number NSN 3413013154541. The requirement includes the delivery of these machines within 167 days after order, with approved sources being specified in the solicitation. These drilling machines are critical for metalworking applications and support various defense operations. Interested vendors must submit their quotes electronically, as hard copies will not be available, and any inquiries should be directed to the DLA via email at DibbsBSM@dla.mil.
    44--Thrust Bearing Oil Coolers Replacement
    Interior, Department Of The
    The Department of the Interior, Bureau of Reclamation, is seeking qualified businesses to provide modern replacement thrust bearing oil coolers for the Spring Creek Power Plant Hydro-Electric Generator. The objective is to replace four original, leaking oil coolers from a 1964 Allis-Chalmers 75 MW hydroelectric generator with ten new drop-in replacement units that meet or exceed the original specifications and adhere to various industry standards. This procurement is crucial for maintaining the operational efficiency and reliability of the hydroelectric generator. Interested vendors must submit their responses, including business size, contact information, capabilities statements, and relevant documentation, by December 16, 2025, at 11:00 AM PST to Mouang Phan at mphan@usbr.gov.
    CNC Punch/Fiber Laser Combination Machine
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is conducting a sources sought notice to identify potential vendors for a Computer Numerically Controlled (CNC) Punch/Fiber Laser Combination Machine for the Fleet Readiness Center East located at Cherry Point, North Carolina. The procurement includes comprehensive turnkey services such as shipping, installation, training, and technical data, with specific requirements for Dell brand laptops and Siemens Step 7 software for maintenance support. This machine is critical for processing aircraft sheet metal engine components, ensuring precision in punching and laser cutting across various materials, and must comply with stringent safety and environmental standards. Interested parties are encouraged to submit their capabilities and comments on the draft statement of work by emailing AVN IPE Market Research at avnipemarketresearch@dla.mil, with responses due by the closing date listed on SAM.gov.
    Integrated Biorefinery Facility North High Bay Revitalization Custom Equipment
    Energy, Department Of
    The Department of Energy's National Renewable Energy Laboratory (NREL) is seeking proposals for the "Integrated Biorefinery Facility North High Bay Revitalization Custom Equipment" project, aimed at enhancing biomass conversion and waste carbon utilization technologies. The project requires the design, fabrication, and commissioning of specialized process equipment, including a Hydroprocessor and a Distillation Column, with a production capacity of approximately one barrel per day, emphasizing operational flexibility and process safety. This initiative is critical for advancing renewable technologies for commercial deployment, with an estimated funding range of $750,000 to $3.5 million and a performance period extending through March 30, 2027. Interested parties must submit their proposals by 5:00 PM Mountain Time on December 17, 2025, and can direct inquiries to Todd Labosky at Todd.Labosky@nrel.gov.