NFAC Signal Conditioning
ID: FA910125NFACSigConditioningType: Sources Sought
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA9101 AEDC PKP PROCRMNT BRARNOLD AFB, TN, 37389-1332, USA

Original Source

https://sam.gov/opp/b3747415c7624986ad28b61eacf0f685/view
Timeline
    Description

    The Department of Defense, through the Air Force Test Center’s Installation Contracting Division at Arnold Air Force Base, is seeking sources capable of providing an integrated, turn-key solution for general-purpose signal conditioning to enhance data input into the Government's data system. The required solution must support four classes of instrumentation, including general-purpose strain measurements, piezoelectric sensors, amplification-only measurements, and pulse timing measurements, with the capability to time stamp data based on an external master clock. This procurement is critical for ensuring accurate data collection and analysis in defense operations, and interested parties must submit their company information and a general overview of their proposed solution by 1:00 PM Central Time on December 27, 2024, via email to the primary contact, Brooke Vandeman, at brooke.vandeman@us.af.mil.

    Point(s) of Contact
    Brooke Vandeman
    brooke.vandeman@us.af.mil
    Files
    Title
    Posted
    Attachment 1 - DRAFT Technical Specifications.docx
    The document outlines the requirements needed to access the “Attachment 1 – DRAFT Technical Specifications” related to a government contract. Specifically, companies must have completed a basic NIST 800-171 self-assessment within three years, as verified through the Supplier Performance Risk System (SPRS). Contractors are also mandated to adhere to 32 CFR Part 117 (NISPOM) guidelines, which restrict the transmission of Controlled Unclassified Information (CUI) to contractors lacking a valid assessment. Companies interested in obtaining the technical specifications must email the Contracting Officer with their CAGE Code. Upon confirming compliance with the NIST 800-171 self-assessment, the document will be provisioned via DoD SAFE to the company’s point of contact. This file serves as an essential notice for contractors regarding the compliance prerequisites necessary for pursuing federal contracts that may involve sensitive information handling, emphasizing government accountability and security standards.
    Sources Sought Notice.docx
    The Air Force Test Center's Installation Contracting Division at Arnold Air Force Base is seeking capable sources for an integrated, turn-key solution to provide general-purpose signal conditioning for data input into the Government's data system. The required solution must accommodate four classes of instrumentation: general-purpose strain measurements, piezoelectric sensors, amplification-only measurements, and pulse timing measurements, with the ability to time stamp data based on an external master clock. Interested parties must submit their company information, including their System for Award Management Unique Entity Identifier, and a general overview of their proposed solution, including a block diagram. This Sources Sought Notice is informational only, does not constitute a formal solicitation, and indicates no obligation for the Government to award a contract. Responses are due by 1:00 PM Central Time on December 27, 2024, via email, with a focus on understanding the interest and capabilities of potential respondents.
    Lifecycle
    Title
    Type
    NFAC Signal Conditioning
    Currently viewing
    Sources Sought
    Similar Opportunities
    ETIRS Analog to Digital Voltage
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Air Warfare Center Aircraft Division (NAWCAD), is conducting market research to identify potential sources for rack-mounted Analog Discrete Input Measurement instruments for the Engine Test Instrumentation Replacement System (ETIRS). The procurement aims to acquire instruments that meet specific performance and environmental requirements, including compliance with military standards for vibration, temperature, and humidity. These instruments are critical for ensuring accurate measurements in various testing environments, particularly in naval applications. Interested vendors must submit their responses by December 16, 2024, including their capabilities, past performance, and compliance with specified requirements, to the primary contacts Justin Panecki and Terrence Shearer via the provided email addresses.
    ETIRS MIL-STD-1553 Communciation
    Active
    Dept Of Defense
    The Department of Defense, specifically the Naval Air Warfare Center Aircraft Division (NAWCAD), is conducting market research to identify potential sources for rack-mounted Analog Discrete Input Measurement instruments for the Engine Test Instrumentation Replacement System (ETIRS). The instruments must comply with MIL-STD-1553 Communication Performance requirements and meet specific environmental and operational standards, including Class 1 and Class 4 environmental requirements as outlined in MIL-PRF-28800. Interested vendors are invited to submit information regarding their capabilities, past performance, and compliance with specified technical requirements, with responses due by December 16, 2024, at 4 PM EST. For further inquiries, vendors can contact Terrence Shearer at terrence.d.shearer.civ@us.navy.mil or by phone at 732-323-2788.
    ETIRS Analog Thermocouple Measurement
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Air Warfare Center Aircraft Division (NAWCAD), is conducting market research to identify potential sources for rack-mounted Analog Discrete Input Measurement instruments for the Engine Test Instrumentation Replacement System (ETIRS). The procurement aims to acquire instruments that meet specific performance and environmental requirements, including compliance with military standards for temperature, humidity, and vibration. These instruments are critical for ensuring accurate measurements in various operational environments. Interested vendors must respond by December 16, 2024, with their capabilities, documentation, and any relevant past performance information to the designated contacts, Paras Patel and Terrence Shearer, whose emails are provided in the notice.
    ETIRS Analog Vibration Measurement
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Air Warfare Center Aircraft Division (NAWCAD), is seeking information from potential vendors regarding the procurement of rack-mounted Analog Discrete Input Measurement instruments for the Engine Test Instrumentation Replacement System (ETIRS). The instruments must meet specific performance and environmental requirements, including compliance with military standards for vibration and environmental conditions, and should ideally be Commercial Off the Shelf (COTS) or Modified COTS products. This Request for Information (RFI) is intended to assess market capabilities and does not constitute a solicitation; responses are due by December 16, 2024, at 4 PM EST. Interested parties should contact Justin Panecki at justin.p.panecki2.civ@us.navy.mil or Terrence Shearer at terrence.d.shearer.civ@us.navy.mil for further details.
    ETIRS Analog Tachometer Frequency
    Active
    Dept Of Defense
    The Department of Defense, specifically the Naval Air Warfare Center Aircraft Division (NAWCAD), is conducting market research to identify potential sources for the procurement of rack-mounted Analog Discrete Input Measurement instruments for the Engine Test Instrumentation Replacement System (ETIRS). The instruments must meet specific performance and environmental requirements, including compliance with military standards for vibration, temperature, and humidity, as well as the capability to be controlled through standardized Application Programming Interfaces (APIs). This procurement is critical for enhancing the functionality and reliability of naval aircraft testing systems. Interested vendors must submit their responses, including documentation of capabilities and past performance, by December 16, 2024, at 4 PM EST, and can contact Paras Patel or Terrence Shearer for further information.
    ETIRS Analog Discrete Input Measurement
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Air Warfare Center Aircraft Division (NAWCAD), is conducting market research to identify potential sources for rack-mounted Analog Discrete Input Measurement instruments for the Engine Test Instrumentation Replacement System (ETIRS). The instruments must meet specific performance and environmental requirements, including compliance with military standards for operational conditions and software control through standardized APIs. This Request for Information (RFI) aims to gather vendor capabilities, past performance data, and pricing details, with responses due by December 16th at 4 PM EST. Interested vendors should contact Paras Patel at paras.d.patel.civ@us.navy.mil for further information and to request the performance specification, which is export-controlled.
    ETIRS Analog Synchro Measurement
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Air Warfare Center Aircraft Division (NAWCAD), is conducting market research to identify potential sources for rack-mounted Analog Discrete Input Measurement instruments for the Engine Test Instrumentation Replacement System (ETIRS). The instruments must meet specific performance and environmental requirements, including compliance with military standards for operation in shipboard environments. This Request for Information (RFI) is aimed at gathering vendor capabilities, documentation of past performance, and technical specifications, with responses due by December 16, 2024, at 4 PM EST. Interested vendors should contact Paras Patel or Terrence Shearer for further details and must provide a current DD2345 form to access the performance specifications.
    ETIRS ARINC-429 Communication
    Active
    Dept Of Defense
    The Department of Defense, specifically the Naval Air Warfare Center Aircraft Division (NAWCAD), is conducting market research to identify potential sources for rack-mounted Analog Discrete Input Measurement instruments for the Engine Test Instrumentation Replacement System (ETIRS). The procurement aims to acquire instruments that meet specific performance and environmental requirements, including compliance with ARINC-429 communication standards and various military specifications. These instruments are critical for ensuring accurate measurements and reliable performance in naval aviation applications. Interested vendors must respond to the Request for Information (RFI) by December 16, 2024, providing documentation of their capabilities, past performance, and estimated pricing, with inquiries directed to Justin Panecki at justin.p.panecki2.civ@us.navy.mil or Terrence Shearer at terrence.d.shearer.civ@us.navy.mil.
    ETIRS Analog Voltage Output Stimulus
    Active
    Dept Of Defense
    The Department of Defense, specifically the Naval Air Warfare Center Aircraft Division (NAWCAD), is conducting market research to identify potential sources for the procurement of rack-mounted Analog Voltage Output Stimulus instruments as part of the Engine Test Instrumentation Replacement System (ETIRS). The instruments must meet specific performance and environmental requirements, including compliance with military standards for operation in various conditions, and may be Commercial Off the Shelf (COTS) or Modified COTS products. Interested vendors are invited to submit their capabilities, past performance, and technical documentation by December 16, 2024, to the designated contacts, Justin Panecki and Terrence Shearer, with further details available upon request for U.S. DoD contractors who provide the necessary documentation.
    ETIRS Torque Meter
    Active
    Dept Of Defense
    The Department of Defense, specifically the Naval Air Warfare Center Aircraft Division (NAWCAD), is conducting market research to identify potential sources for the procurement of rack-mounted Analog Discrete Input Measurement instruments for the Engine Test Instrumentation Replacement System (ETIRS). The instruments must meet specific performance and environmental requirements, including compliance with military standards for operation in shipboard environments. This Request for Information (RFI) is intended to gather vendor capabilities, past performance data, and technical specifications, with responses due by December 16, 2024, at 4 PM EST. Interested vendors should contact Terrence Shearer at terrence.d.shearer.civ@us.navy.mil for further details and to request the performance specification, which is export-controlled.