Sources Sought for Elastomeric Forming Hydraulic Press at CCAD
ID: PANRSA-23-P-0000011043Type: Sources Sought
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK CCAD CONTR OFFCORPUS CHRISTI, TX, 78419-5260, USA

PSC

HYDRAULIC AND PNEUMATIC PRESSES, POWER DRIVEN (3442)

Original Source

https://sam.gov/opp/529561224a8c456da4ac66f0902d7126/view
Timeline
    Description

    Sources Sought DEPT OF DEFENSE DEPT OF THE ARMY is seeking potential sources to supply an elastomeric hydraulic press. This press is used for elastomeric sheet metal forming and is required to meet specific specifications. The press should have a custom frame 4-post design, a light curtain safety interlock, metal rear and side doors/guarding, and a remote operated two-handed control. It should also have a 36"x60" forming area with a 24" daylight, and use a set of three rubber pads for assembly. Additionally, the press should have a telescoping lower platen shuttle for loading and unloading, an integrated jib boom with a 6' reach, and a spare parts kit. The place of performance for this procurement is Corpus Christi, TX.

    Point(s) of Contact
    Harold "Jay" Russell Jr.
    (361) 961-7831
    harold.w.russell.civ@army.mil
    Dawyn M. Martinez
    dawyn.m.martinez.civ@army.mil
    Files
    Title
    Posted
    SOW Hydraulic Press at CCAD.pdf
    Lifecycle
    Title
    Type
    Sources Sought for Elastomeric Forming Hydraulic Press at CCAD
    Currently viewing
    Sources Sought
    Similar Opportunities
    Sources Sought for the fabrication of quantity 100 aluminum 120-millimeter (mm) sabots.
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army, is seeking sources for the fabrication of 100 aluminum 120-millimeter sabots, as outlined in a Sources Sought Notice. The procurement requires the use of 7075-T6 aluminum and adherence to precise technical specifications, including delivery of the first lot of 20 units within 60 days of contract award, followed by the remaining 80 units within 120 days. This initiative is critical for ensuring the performance and reliability of military applications, with strict tolerances and inspection requirements detailed in accompanying technical documents. Interested parties should respond with their capabilities and past experience by the specified deadline, and can direct inquiries to Melissa M. Murphy at Melissa.m.murphy20.civ@army.mil or by phone at 520-672-9589.
    RUBBER SHEET,SOLID
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of solid rubber sheets. This procurement is categorized under the NAICS code 326299, which encompasses all other rubber product manufacturing, and is essential for various defense applications. The contract will be awarded on a fixed-price basis, with specific requirements for inspection, acceptance, and compliance with technical specifications outlined in the Individual Repair Parts Ordering Data (IRPOD). Interested vendors should submit their proposals, ensuring compliance with the outlined requirements, and may contact John A. Masters at 717-605-1213 or via email at JOHN.A.MASTERS15.CIV@US.NAVY.MIL for further details. The pricing for quotations is valid for 60 days post-closing, and the solicitation emphasizes a total small business set-aside.
    53--RUBBER SHEET, SOLID
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the procurement of solid rubber sheets. These materials are critical for use in a crucial shipboard system, where the integrity of the rubber sheets is vital to prevent serious personnel injury and equipment failure. The rubber sheets must meet specific standards, including toxicity and flammability requirements, and are classified as special emphasis material, necessitating stringent quality control measures. Proposals are due by 4:30 PM EST on September 19, 2024, and interested vendors can contact Noelle M. Smith at 717-605-3992 or via email at NOELLE.M.SMITH10.CIV@US.NAVY.MIL for further information.
    Fluidized Bed Rubber Denuding System Maintenance and Repair Contract
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking qualified contractors for the maintenance and repair of the Fluidized Bed Rubber Denuding System (FBRDS) at the Red River Army Depot in Texarkana, Texas. The procurement aims to ensure compliance with the Air Emissions Operating Permit issued by the Texas Commission on Environmental Quality, requiring various levels of maintenance, including Level IV and Level III maintenance, as well as emergency repairs and the replacement of critical components. This system plays a vital role in controlling emissions during the denuding process, making its efficient operation essential for environmental compliance. Interested parties must submit a letter of interest, including relevant certifications and past government awards, to Contract Specialist Luke Leitschuck at luke.j.leitschuck.civ@army.mil by 3:00 PM CST on September 9, 2024, as this sources sought notice is solely for information gathering and no contract will be awarded from this notice.
    Accurpress and Hyd-Mech Service
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is soliciting proposals for on-site preventive maintenance, emergency repairs, and replacement parts for Accurpress Press Brakes and Hyd-Mech machines at the Anniston Army Depot in Alabama. The contract requires the selected contractor to provide trained personnel, perform biannual preventive maintenance, and ensure timely emergency support, with a focus on using quality replacement parts and maintaining clear communication with the contracting officer. This procurement is vital for ensuring the reliability and operational readiness of critical machinery used in military operations. Interested small businesses must submit their proposals by September 16, 2024, at 10:00 AM CST, and can contact Johnny Stewart II or Sonja L. Freeman for further information.
    Sources Sought_Gauge, Chamber
    Active
    Dept Of Defense
    The Department of the Army, through the Army Contracting Command – Detroit Arsenal (ACC-DTA), is conducting a Sources Sought Notice to gather information regarding the procurement of a Gauge, Chamber (NSN: 5220-01-689-4052, Part Number: 340904 / 3HN73). This market research aims to assess the interest, capabilities, and qualifications of potential suppliers to inform the Government's acquisition strategy for this item, which falls under the NAICS code 333515 for Cutting Tool and Machine Tool Accessory Manufacturing. The Gauge, Chamber is critical for precision measurement and inspection processes within military operations. Interested parties are requested to submit their responses by email to Nicholas Lang at nicholas.a.lang.civ@army.mil no later than Wednesday, September 18, 2024, by 3:30 PM EST.
    Micro-/Macro- Hardness Tester
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Contracting Command, is seeking proposals for the procurement of a Micro-/Macro- Hardness Tester for the Ground Vehicle Systems Center's Materials Testing Lab in Warren, Michigan. The required equipment must meet specific criteria, including a load range of 0.3 kg to 3,000 kg and the capability to conduct tests according to ASTM standards for various hardness scales such as Vickers, Knoop, Brinell, and Rockwell. This procurement is critical for ensuring the quality and reliability of materials used in military vehicles, emphasizing the importance of precise hardness testing in material engineering. Interested vendors, particularly small businesses that are service-disabled veteran-owned, economically disadvantaged women-owned, or HUBZone certified, must submit their proposals by September 13, 2024, with the delivery of the tester expected by December 16, 2024. For further inquiries, contact Conner Fowler at jason.c.fowler8.civ@army.mil.
    Hydraulic Drive Unit
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency, is seeking potential vendors for the procurement of the F-16 Hydraulic Drive Unit, identified by National Stock Number 1650 01 564 1844 and Part Number 16M002-817. This Sources Sought Synopsis aims to conduct market research to assess the interest of small businesses and identify qualified contractors capable of manufacturing, inspecting, and planning logistics for the hydraulic drive unit, which is critical for aircraft operations. The manufacturing location is specified as Tinker Air Force Base in Oklahoma, and interested parties are encouraged to submit a Source Approval Request (SAR) for qualification. For further inquiries, potential vendors can contact 423 SCMS at 423.SCMS.AFMC.RFI@us.af.mil, as there is currently no immediate solicitation available.
    28--HYDRAULIC JACK
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of a hydraulic jack, specifically NSN 2815015649939. The requirement includes a quantity of one unit to be delivered to DLA Distribution San Diego within 168 days after order placement, with the approved source being 7PZX0 PA12652827. This hydraulic jack is crucial for various military applications, ensuring operational readiness and maintenance of equipment. Interested vendors are encouraged to submit their quotes electronically, as hard copies of the solicitation will not be available, and any inquiries should be directed to DibbsBSM@dla.mil.
    58--TILE,RUBBER
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support MECH, is seeking to procure 5,000 units of rubber tile, identified by NSN 1H-5840-014645007, under a presolicitation notice. This procurement requires engineering source approval to ensure the quality of the part, necessitating that any alternate sources must qualify according to the design control activity's procedures approved by the relevant Government engineering activity. The rubber tile is critical for radar equipment applications, and the Government intends to negotiate with only one source under FAR 6.302-1, although all responsible sources may express their interest and capability to fulfill the requirement. Interested parties should contact Jordan Burt at (717) 605-1318 or via email at jordan.burt@navy.mil for further details.