Request for Information (RFI) Ammunition (9mm and 5.56mm) to support the Department of Defense Office of Inspector General (DoDIG)
ID: HQ003424RX161Type: Sources Sought
Overview

Buyer

DEPT OF DEFENSEWASHINGTON HEADQUARTERS SERVICES (WHS)WASHINGTON HEADQUARTERS SERVICESWASHINGTON, DC, 203011000, USA

PSC

AMMUNITION, THROUGH 30MM (1305)
Timeline
    Description

    Request for Information (RFI) Ammunition (9mm and 5.56mm) to support the Department of Defense Office of Inspector General (DoDIG)
    The Department of Defense (DoD) Office of Inspector General (OIG) is seeking qualified vendors to provide 482,500 rounds of ammunition (9mm and 5.56mm). This ammunition will be used to support the Defense Criminal Investigative Service (DCIS) in its investigative and law enforcement duties. The procurement requires new Original Equipment Manufacturer (OEM) items only, with no gray market or counterfeit supplies allowed. The vendor must be an OEM, authorized dealer, authorized distributor, or authorized reseller for the proposed equipment/system. The ammunition will be delivered to 36 continental United States (CONUS) locations. Interested parties are requested to submit their capability statement by 5pm ET on March 22, 2024, to the provided email addresses.

    Files
    Title
    Posted
    The specification sheet outlines various ammunition procurements for FY2024, detailing specific products, salient characteristics, and quantities needed for law enforcement use across different delivery locations. Key items include 303,500 rounds of 9mm Luger and 96,000 rounds of 5.56mm TAP BARRIER ammunition. Vendors must coordinate delivery schedules with designated points of contact prior to shipment.
    Similar Opportunities
    Maneuver Ammunition and Pyrotechnics
    Active
    Dept Of Defense
    The Department of Defense, through the Marine Corps Systems Command (MCSC), is seeking input from potential suppliers for the procurement of various small and medium caliber ammunition and pyrotechnics under Request for Information (RFI) M67854-25-I-5203. The requirements include a diverse range of ammunition types, such as match rounds from 9mm to 7.62, lead-free options, 12-gauge shotgun shells, and fireworks for airshows, with vendors required to provide a comprehensive Capability Statement detailing their experience and capabilities. This RFI serves as preliminary market research and does not obligate the government to procure these items; however, interested vendors must submit their responses electronically by December 27, 2024, and are encouraged to monitor the Sam.gov website for updates. For further inquiries, vendors may contact Anthony G. Fennell at anthony.fennell@usmc.mil or Janice Harvey at janice.harvey@usmc.mil.
    7.62MM SPECIAL BALL LONG RANGE AMMUNITION, MK 316 MOD 0
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Surface Warfare Center (NSWC) Crane Division, is seeking proposals for the procurement of 7.62mm Special Ball Long Range Ammunition, MK 316 MOD 0, to support various military and law enforcement agencies, including the US Marine Corps and US Special Operations Command. The procurement aims to establish a Firm Fixed-Price, Five-year, Indefinite Delivery Indefinite Quantity (IDIQ) contract for approximately 16,560,000 cartridges, with specific manufacturing and packaging requirements outlined in the Statement of Work and associated technical documents. This ammunition is critical for operational readiness and effectiveness in various defense and security missions. Interested vendors must submit proposals by December 24, 2024, at 2:00 PM ET, and are encouraged to contact Ms. Shawna Gainey at shawna.y.gainey.civ@us.navy.mil or 812-227-9623 for further details.
    Sig Sauer model firearms and accessories
    Active
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command - New Jersey (ACC-NJ), is conducting market research to identify potential sources for supplying various Sig Sauer model firearms and associated accessories. The procurement includes firearms such as the P226, P320, MPX, MCX, SIGM400, SIG516, and SIG716, along with magazines, suppressors, spare parts, tools, and training courses for operators and armorers. These items are critical for enhancing soldier lethality and operational readiness. Interested vendors must submit their capabilities, including compliance with Item Unique Identification (IUID) requirements, by 4:00 PM EST on January 24, 2025, to Laura Burgos-Magidson at laura.e.burgos-magidson.civ@army.mil. This notice serves as a Sources Sought and does not constitute a solicitation or commitment by the government.
    Ammunition .22LR
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is seeking suppliers for .22LR ammunition, compliant with ISSF standards, through a Combined Synopsis/Solicitation. The procurement requires cartridge ammunition, specifically Eley .22LR, with each lot containing no fewer than 10,000 rounds, and vendors must meet USAMU accuracy standards while submitting a technical data sheet. This ammunition is critical for various military training and operational purposes, ensuring high precision and reliability. Interested vendors can contact Hiram Rodriguez at hiram.rodriguez16.civ@army.mil or 706-545-6698, or Ralph Jones at ralph.m.jones12.civ@army.mil or 315-772-1669 for further details, as this opportunity is set aside for small businesses under FAR 19.5.
    10--MAGAZINE,CARTRIDGE
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 65 units of the NSN 1005016784950 Magazine, Cartridge. This solicitation may lead to an Indefinite Delivery Contract (IDC) with a term of one year or until the total orders reach $250,000, with an estimated three orders per year and a guaranteed minimum quantity of nine. The items will be shipped to various DLA depots both within the continental United States (CONUS) and outside (OCONUS), highlighting the importance of these magazines in military operations. Interested vendors must submit their quotes electronically, and for any inquiries, they can contact the buyer via email at DibbsBSM@dla.mil.
    1305--Ammunition for VISN 23 VA Police
    Active
    Veterans Affairs, Department Of
    The Department of Veterans Affairs (VA) is seeking proposals from small businesses for a one-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to supply small arms ammunition for law enforcement training and duty use within the Veterans Integrated Services Network 23 (VISN 23). The procurement includes specific brand-name ammunition for Beretta 9MM and Sig Sauer handguns, as well as Windham Weaponry rifles, with a focus on newly manufactured products that comply with federal, state, and local regulations. This initiative is crucial for ensuring that VA Law Enforcement Officers maintain their proficiency and safety standards during training and operational activities. Interested suppliers must submit their proposals by January 5, 2025, and can direct inquiries to Contract Specialist Christi Melendez at Christi.Melendez@va.gov or by phone at 320-255-6320.
    10--RETAINER,GUN COMPON
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 80 units of the NSN 1005015586927 Retainer, Gun Component. This solicitation aims to establish an Indefinite Delivery Contract (IDC) for a term of one year or until the total orders reach $250,000, with an estimated four orders per year and a guaranteed minimum quantity of 12 units. The items will be shipped to various DLA depots both within the continental United States (CONUS) and outside (OCONUS), highlighting the importance of these components in supporting military operations. Interested vendors must submit their quotes electronically, and for any inquiries, they can contact the buyer via email at DibbsBSM@dla.mil. The solicitation is available online, and hard copies will not be provided.
    Demilitarization and Disposal of Shotgun Cartridges
    Active
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command – Rock Island, is soliciting proposals for the demilitarization and disposal of shotgun cartridges under solicitation number W519TC-25-R-0014. The procurement involves a significant quantity of 1,898,633 cartridges, with contractors required to provide comprehensive services that adhere to strict safety, environmental, and regulatory guidelines. This initiative is crucial for maintaining military operational readiness and ensuring compliance with federal regulations regarding ammunition management. Interested contractors must submit sealed bids by December 30, 2024, and can direct inquiries to Caitlyn Smith at caitlyn.l.smith3.civ@army.mil or John Fury at john.p.fury2.civ@army.mil for further information.
    10--PARTS KIT,GUN
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of a Parts Kit for a gun, specifically NSN 1005014936041. The requirement includes a quantity of 45 units to be delivered to DLA Distribution within 277 days after order placement, with the approved source being 046U2 TLCNVX488. This procurement is critical for maintaining the operational readiness of military equipment, ensuring that necessary parts are available for weapon systems. Interested vendors must submit their quotes electronically, as hard copies of the solicitation will not be provided, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil.
    10--CHAMBER AND DISCRIM
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of chamber and discriminators, specifically NSN 1005011422841. The procurement includes two lines: 778 units for Line 0001 and 1 unit for Line 0002, both to be delivered to DLA Distribution Red River within specified timelines of 274 and 90 days after order, respectively. These components are critical for small arms and ordnance manufacturing, underscoring their importance in defense operations. Interested vendors are encouraged to submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil.