51--WRENCH,SPANNER
ID: N0010425QYH32Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP WEAPON SYSTEMS SUPPORT MECHMECHANICSBURG, PA, 17050-0788, USA

PSC

HAND TOOLS, NONEDGED, NONPOWERED (5120)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/39f9032c48b448ad8712c4c799560d00/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy, is soliciting bids for the manufacture of WRENCH, SPANNER, under a federal contract managed by NAVSUP Weapon Systems Support Mechanical. This procurement aims to fulfill specific quality and design requirements for hand tools, particularly focusing on compliance with military standards and ensuring that the products are free from mercury contamination, as they will be used on submarines and surface ships. The contract emphasizes the importance of quality assurance and inspection, with a requirement for suppliers to maintain an acceptable inspection system and provide detailed documentation for any design changes. Interested vendors should contact Jessica M. Gershenfeld via email at JESSICA.M.GERSHENFELD.CIV@US.NAVY.MIL for further details and to submit their proposals, as this opportunity is set aside for small businesses.

    Point(s) of Contact
    JESSICA M. GERSHENFELD, N741.P17, EMAIL JESSICA.M.GERSHENFELD.CIV@US.NAVY.MIL
    JESSICA.M.GERSHENFELD.CIV@US.NAVY.MIL
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    51--WRENCH,SPANNER
    Currently viewing
    Presolicitation
    51--WRENCH,SPANNER
    Solicitation
    Similar Opportunities
    WASHER, HANDWHEEL
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of handwheel washers, classified under the NAICS code 332722 for Bolt, Nut, Screw, Rivet, and Washer Manufacturing. The washers are critical components intended for use in shipboard systems, where the use of incorrect or defective materials could lead to severe operational failures and safety risks. Interested vendors should note that this opportunity is set aside for small businesses, with a proposal submission deadline extended to September 5, 2025, and must comply with stringent quality assurance and inspection requirements as outlined in the solicitation. For further inquiries, potential bidders can contact Ryan Powell at ryan.m.powell22.civ@us.navy.mil or by phone at 717-605-8197.
    WASHER,SPHER
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting bids for the manufacture of a specialized component known as the WASHER,SPHER. This procurement requires adherence to specific material and physical requirements, as well as compliance with various military standards for marking and inspection. The WASHER,SPHER is critical for military applications, ensuring the reliability and functionality of equipment used by the Navy. Interested vendors should note that the delivery timeline is set at 90 days, and they can reach out to Jennifer Henry at 717-605-2172 or via email at JENNIFER.HENRY@NAVY.MIL for further details regarding the solicitation process.
    Total Small Business Set Aside Brand Name: Snap-On Pneumatic High-Torque Wrench and Regulator Filter
    Dept Of Defense
    The Department of Defense, specifically the Naval Surface Warfare Center, is seeking quotes from qualified small businesses for the procurement of Snap-On Pneumatic High-Torque Wrench and Regulator Filter, under a Total Small Business Set-Aside. This acquisition is critical for maintaining the operational readiness of the Landing Craft Air Cushion (LCAC) 100 program, as Snap-On is the only brand that meets the necessary specifications and has been tested for compatibility, ensuring safety and efficiency. Interested vendors must submit their quotes, including unit price, shipping costs, CAGE code, lead time, and WAWF capability, by December 22, 2025, at 11:00 a.m. Central Time, to Terra Roberts at terra.s.roberts.civ@us.navy.mil. The government will evaluate submissions based on best value, considering price, delivery, quality, and past performance.
    CRIMPER TOOL
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting proposals for the manufacture and supply of a Crimper Tool. This procurement requires the tool to meet specific design, material, and dimensional standards as outlined in the solicitation, with particular emphasis on compliance with technical documentation and quality assurance requirements. The Crimper Tool is essential for various military applications, ensuring operational readiness and efficiency in maintenance tasks. Interested vendors should direct inquiries to Sarah E. Rice at SARAH.E.RICE14.CIV@US.NAVY.MIL or by telephone at 771-229-3872, with proposals expected to remain valid for 60 days post-submission.
    WASHER,FLAT
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting quotations for the procurement of 12 flat washers (NSN 1HM 5310 009216309) through a Request for Quotation (RFQ). This procurement is set aside entirely for small businesses and aims to ensure the delivery of high-quality components for use in Navy submarines, adhering to stringent military specifications and quality assurance requirements. Interested vendors are encouraged to evaluate their past performance and delivery lead times, as these factors will significantly influence the selection process, with the contract award anticipated to occur following the evaluation of competitive offers. For further inquiries, potential bidders can contact Sagan Kakkar at 717-605-9121 or via email at sagan.kakkar.civ@us.navy.mil.
    TOOL-CONT REMOVA
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the manufacture of a TOOL-CONT REMOVA. This procurement aims to fulfill specific material and physical requirements as outlined in the associated drawings and specifications, ensuring compliance with military standards for quality and inspection. The TOOL-CONT REMOVA is critical for operational readiness and maintenance within naval operations. Interested contractors should note that the delivery timeline is set for 90 days, and they can reach out to Amanda Hayward at 717-605-5834 or via email at AMANDA.R.HAYWARD.CIV@US.NAVY.MIL for further details regarding the solicitation.
    SPRING,RIGHT-HAND
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting proposals for the procurement of right-hand springs under the title "SPRING, RIGHT-HAND." This contract requires the manufacturing of springs that will be utilized in critical shipboard systems, emphasizing the importance of quality and compliance with stringent specifications to prevent failures that could lead to serious safety risks. The procurement is classified under the NAICS code 332613 for Spring Manufacturing and is subject to various quality assurance requirements, including ISO certifications and government inspections. Interested vendors should contact Ashton K. Perry at 717-605-7574 or via email at ashton.k.perry.civ@us.navy.mil for further details, with proposals expected to adhere to a specific delivery schedule and quality assurance protocols.
    HD RNG REMOVAL TOOL
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting proposals for the HD RNG Removal Tool, categorized under the NAICS code 332216 for Saw Blade and Handtool Manufacturing. This procurement involves the supply of hand tools that are non-edged and non-powered, which are critical for various military applications. The contract will include specific requirements for inspection, acceptance, and quality assurance, with a focus on compliance with military specifications and standards. Interested vendors should direct inquiries to Melissa Furness at 771-229-0075 or via email at MELISSA.FURNESS@NAVY.MIL, and are advised that pricing must remain valid for 60 days post-quotation submission.
    WASHER,FLAT
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting quotations for the procurement of 18 flat washers (NSN 1HM 5310 009216405) through a Request for Quotation (RFQ). This procurement is exclusively set aside for small businesses, and the selected contractor will be evaluated based on both price and non-price factors, including delivery lead time and past performance. The washers are intended for use on Navy submarines, highlighting their critical role in maintaining operational readiness and safety. Interested vendors should direct inquiries to Sagan Kakkar at 717-605-9121 or via email at sagan.kakkar.civ@us.navy.mil, with the submission deadline and further details outlined in the solicitation documents.
    NUT,UNION
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting bids for the procurement of Union Nuts under the NAVSUP Weapon Systems Support Mechanicsburg office. This contract requires the delivery of specialized materials that are critical for shipboard systems, emphasizing the need for high-quality standards to prevent failures that could lead to serious safety risks. The selected contractor will be responsible for ensuring compliance with stringent inspection and certification requirements, with a delivery timeline of 365 days from the award date. Interested vendors should contact Francine A. Pomells at 717-605-3354 or via email at francine.a.pommells.civ@us.navy.mil for further details and to submit their proposals.