53--CLAMP ASSEMBLY,RETA - AND OTHER REPLACEMENT PARTS
ID: N0038325QN292Type: Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP WEAPON SYSTEMS SUPPORTPHILADELPHIA, PA, 19111-5098, USA

NAICS

Hardware Manufacturing (332510)

PSC

HARDWARE, COMMERCIAL (5340)

Original Source

https://sam.gov/opp/a4787646d520451385e8d702e1cb57d1/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the procurement of clamp assemblies, replacement parts, and related hardware. The contractor is required to maintain a quality control system compliant with established military standards and to provide detailed quality assurance documentation, inspection procedures, and failure analysis reports. These components are critical for maintaining operational readiness and support for naval systems. Interested vendors should direct inquiries to Jake Kucowski at 215-679-2012 or via email at jake.kucowski.civ@us.navy.mil, with proposals expected to adhere to the outlined quality standards and submission guidelines.

    Point(s) of Contact
    Telephone: 2156792012
    JAKE.KUCOWSKI.CIV@US.NAVY.MIL
    Files
    No associated files provided.
    Similar Opportunities
    53--PIPE CLAMP ASSY
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of Pipe Clamp Assemblies (NSN 5340-01-523-2015). The requirement includes an estimated quantity of 11 units, with delivery expected within 55 days after order placement, and the potential for an Indefinite Delivery Contract (IDC) lasting one year or until the total order value reaches $350,000. These items are critical for various military applications and will be shipped to multiple DLA depots both within the continental United States and overseas. Interested vendors must submit their quotes electronically, and for any inquiries, they can contact the DLA at DibbsBSM@dla.mil.
    16--FOLLOWER GEAR - AND OTHER REPLACEMENT PARTS
    Buyer not available
    The Department of Defense, through the Department of the Navy's NAVSUP Weapon Systems Support, is seeking proposals for the procurement of 32 units of follower gear and other replacement parts, identified by NSN 1R-1680-016216738-EY. This procurement requires engineering source approval due to the critical nature of the part, necessitating that only approved sources may supply the item, as the Government lacks sufficient data to source it from alternative suppliers. Interested vendors must submit their qualifications and any required documentation for source approval, as proposals will only be considered from those who meet the established criteria. For further inquiries, Kristin Clemens can be contacted at (215) 697-3814 or via email at KRISTIN.CLEMENS2.CIV@US.NAVY.MIL, with a proposal submission deadline of 45 days from the notice publication date.
    CAP ASSEMBLY
    Buyer not available
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the procurement of CAP Assembly services. This contract requires compliance with various quality assurance and inspection standards, including unique identification and valuation, as well as adherence to specific packaging and delivery requirements for nuclear reactor components. The goods and services procured are critical for maintaining the operational readiness of naval systems, emphasizing the importance of quality and timely delivery. Interested vendors should contact Breanne R. Clippinger at 771-229-0090 or via email at BREANNE.R.CLIPPINGER.CIV@US.NAVY.MIL for further details, and proposals must be submitted within the specified timeframe as outlined in the solicitation documents.
    53--CLAMP,SYNCHRO
    Buyer not available
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 14 units of the CLAMP, SYNCHRO (NSN 5340-01-623-7609). This solicitation may lead to an Indefinite Delivery Contract (IDC) with a term of one year or until the total orders reach $350,000, with an estimated four orders per year and a guaranteed minimum quantity of two. The clamps are essential hardware components that will be shipped to various DLA depots both within the continental United States (CONUS) and outside (OCONUS). Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.
    COUPLING
    Buyer not available
    The Department of Defense, specifically the Department of the Navy, is soliciting proposals for the procurement of couplings, which are critical components for shipboard systems. The contract requires adherence to stringent quality assurance and inspection standards due to the high stakes involved, as the use of incorrect or defective materials could lead to severe consequences, including personnel injury or loss of life. The selected contractor will be responsible for delivering the specified couplings within 365 days of contract award, with a focus on compliance with detailed specifications and certification requirements. Interested parties should contact Christian Valdez at 717-605-3229 or via email at CHRISTIAN.M.VALDEZ4.CIV@US.NAVY.MIL for further information and to ensure their proposals are submitted by the extended closing date.
    SEAL
    Buyer not available
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting quotes for the procurement of spare parts under the title "SEAL." This solicitation requires vendors to provide items that necessitate government source approval prior to award, and interested parties must submit their proposals along with the necessary documentation as outlined in the NAVSUP WSS source approval brochure. The procurement is critical for fleet support needs, and early and incremental deliveries are preferred to ensure timely fulfillment of government requirements. Interested vendors should direct their quotes and inquiries to Lara L. Szott at LARA.L.SZOTT.CIV@US.NAVY.MIL by the specified due date.
    SPACER,RING
    Buyer not available
    The Department of Defense, specifically the Department of the Navy, is soliciting proposals for the procurement of spacers, rings, and related components through NAVSUP Weapon Systems Support Mechanicsburg. This contract involves the supply of specialized materials that are critical for shipboard systems, where the use of incorrect or defective materials could lead to severe consequences, including personnel injury or loss of vital shipboard systems. Interested vendors must adhere to stringent quality assurance requirements and provide documentation certifying compliance with procurement specifications, with a final delivery timeline of 180 days post-award. For inquiries, potential bidders can contact Jordan D. Neely at 717-605-8197 or via email at JORDAN.D.NEELY2.CIV@US.NAVY.MIL.
    15--HOOK ASSEMBLY - AND OTHER REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
    Buyer not available
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the repair and modification of hook assemblies and other replacement parts. This procurement is a sole source requirement, necessitating government source approval prior to award, as the government lacks sufficient data to contract with other sources. The items are critical for maintaining operational readiness and reliability in military applications. Interested contractors must submit their proposals along with the required documentation as outlined in the NAVSUP WSS Source Approval Brochure, and can direct inquiries to Jacob Wells at jacob.r.wells14.civ@us.navy.mil or by phone at 215-697-1227.
    13--NYLON CONTROL SURFA
    Buyer not available
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the manufacture of Nylon Control Surfaces. This procurement involves the production of specific components classified under the NAICS code 334511, which pertains to the manufacturing of search, detection, navigation, guidance, aeronautical, and nautical systems and instruments. The Nylon Control Surfaces are critical components used in naval operations, and the contract will require adherence to stringent quality assurance standards, including ISO 9001 compliance. Interested vendors should note that the desired delivery time is 591 days for two separate line items, and they must provide proof of being an authorized distributor of the original manufacturer. For further inquiries, potential bidders can contact Zachary R. Morrill at 717-605-1552 or via email at zachary.r.morrill.civ@us.navy.mil.
    48--VALVE ASSEMBLY - AND SIMILAR REPLACEMENT PARTS
    Buyer not available
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting proposals for the procurement of valve assemblies and similar replacement parts. The contract will require the manufacture of these components in compliance with stringent quality and inspection standards, including the prohibition of mercury contamination, as they are intended for use on submarines and surface ships. This procurement is critical for maintaining operational readiness and safety within naval operations. Interested vendors must submit their proposals via email to the primary contact, Lamar R. Crummel, at LAMAR.R.CRUMMEL.CIV@US.NAVY.MIL, with a focus on compliance with the outlined specifications and requirements. The contract type is firm fixed price, and the solicitation includes specific delivery timelines and quality assurance measures.