MICRO-BATH
ID: N0042125Q1078Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVAL AIR WARFARE CENTER AIR DIVPATUXENT RIVER, MD, 20670-1545, USA

NAICS

Other Measuring and Controlling Device Manufacturing (334519)

PSC

PHYSICAL PROPERTIES TESTING AND INSPECTION (6635)

Original Source

https://sam.gov/opp/0bfef54eec1e47ff86885fda439beef2/view
Timeline
  1. 1
    Posted Apr 3, 2025, 12:00 AM UTC
  2. 2
    Updated Apr 3, 2025, 12:00 AM UTC
  3. 3
    Due Apr 8, 2025, 7:00 PM UTC
Description

The Department of Defense, through the Naval Air Warfare Center, is seeking quotes for the procurement of Calibration Standards (CALSTDs) and ancillary equipment, specifically including 13 units of a Micro Bath and related items, on a firm fixed-price basis. This procurement is critical for maintaining aviation calibration standards, ensuring operational readiness and precision of Navy equipment. Interested vendors must be authorized distributors of Fluke Electronics and are required to submit their quotes, including necessary documentation, by 3:00 PM on April 8, 2025, to the primary contact, Benjamin Flores, at benjamin.r.flores3.civ@us.navy.mil.

Point(s) of Contact
benjamin flores
benjamin.r.flores3.civ@us.navy.mil
Files
Title
Posted
Solicitation - N0042125Q1078.pdf
Apr 3, 2025, 2:05 PM UTC
The document is a Request for Quotation (RFQ) from the Naval Air Warfare Center, involving the procurement of Calibration Standards (CALSTDs) and ancillary equipment for aviation support. It outlines the requirement for specific items including 13 units of a Micro Bath (P/N 7103-156), silicone oil (P/N 5010-1L), and tank extenders (P/N 2083). The procurement plan includes stipulations for manufacturer warranties, calibration certificates, serialization, and technical manuals. Delivery is scheduled for April 15, 2025, to a designated address in Beaufort, SC. The contractor must comply with various Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses related to electronic invoicing, subcontracting, and technical data rights. The RFQ emphasizes that submissions are not offers, and the government reserves the right not to pay for preparation costs. Successful bidders must meet the detailed requirements to support Navy calibration activities and ensure compliance with necessary documentation protocols. This RFQ represents a significant step in maintaining aviation calibration standards, reflecting the Navy's commitment to operational readiness and equipment precision.
Lifecycle
Title
Type
MICRO-BATH
Currently viewing
Combined Synopsis/Solicitation
Similar Opportunities
Calibrate and Repair Serial Number 1040C
Buyer not available
The U.S. Navy seeks quotes for repairing and calibrating specific serial number panel meter calibrators, issued through Solicitation N00421-24-Q-0371. These calibrators, manufactured by Arbiter Systems Inc., are vital for ensuring accurate measurements in electrical and electronic testing, and the Navy requires prompt quotations for a quick turnaround. The total contract value is approximately $10,000, with responses due by 1:00 pm EST on August 13, 2024, to the procurement group at Patuxent River.
6,500ft-lbs. Force and Torque Calibrators
Buyer not available
The Department of Defense, through the Naval Surface Warfare Center, Corona Division, is seeking sources for the procurement of 6,500 ft-lbs Force and Torque Calibrators as part of the Naval Air Systems Command's Metrology and Calibration program. The objective is to replace aging calibration equipment with modernized units, with an anticipated requirement for between three and thirty-five calibrators over a five-year indefinite-delivery, indefinite-quantity (IDIQ) contract. These calibrators are essential for maintaining the operational readiness of various tools used at naval depots, ensuring precise calibration standards are upheld. Interested contractors must submit a Capability Statement, limited to 10 pages, by April 24, 2025, to the designated contacts, Andrew Davis and Kandi Hsin, via email.
66--CALIBRATOR,FREQUENC, IN REPAIR/MODIFICATION OF
Buyer not available
The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the repair and modification of frequency calibrators. The procurement aims to ensure the operational readiness of these critical electronic testing instruments, which are essential for maintaining the accuracy of various military equipment. Interested contractors are required to provide a firm-fixed-price quote, including a Repair Turnaround Time (RTAT) of 156.037 days, and must comply with specific quality assurance and inspection standards as outlined in the solicitation. For further details, potential bidders can contact Sarah R. Haley at 717-605-3550 or via email at SARAH.R.HALEY2.CIV@US.NAVY.MIL.
2000ft-lbs. Force and Torque Calibrators
Buyer not available
The Department of Defense, through the Naval Surface Warfare Center, is seeking information from qualified contractors regarding the procurement of 2000ft-lbs Force and Torque Calibrators for the Naval Air Systems Command (NAVAIR) Metrology and Calibration (METCAL) program. This opportunity involves a five-year indefinite-delivery, indefinite-quantity (IDIQ) contract aimed at modernizing calibration tools essential for maintaining various torque measurement devices within the Naval inventory. The contract will require a minimum order of three units at the time of award, with a maximum of 100 units over the contract duration, along with associated training, installation, and technical documentation. Interested parties should submit their Capability Statements to Robert Soto at robert.soto76.civ@us.navy.mil or Kandi Hsin at kandi.y.hsin.civ@us.navy.mil, as this notice is for informational purposes only and does not constitute a solicitation or request for proposals.
Wattmeter Calibrator System
Buyer not available
The Department of Defense, specifically the Naval Surface Warfare Center, is seeking responses from qualified vendors for the modernization of its Wattmeter Calibration Systems (WCS) and the procurement of a Primary Lab Wattmeter Calibration System (PLWCS) under the Naval Air Systems Command's Metrology and Calibration (METCAL) Program. The initiative aims to replace the existing WCS, which has been in service for over 40 years, with modernized systems that enhance measurement range, accuracy, and precision for calibrating both analog and digital radio frequency wattmeters in shore-based laboratories. This procurement is critical for maintaining high standards of measurement accuracy and operational readiness within the Navy, ensuring compliance with military specifications and enhancing workforce training capabilities. Interested parties are encouraged to submit a Capability Statement and Rough Order of Magnitude by April 22, 2025, to Procurement Specialist Taylor O’Neal at taylor.a.oneal7.civ@us.navy.mil, referencing Sources Sought Notice N6426725R6005 in their correspondence.
Proof Test Machine Calibration Services
Buyer not available
The Department of Defense, through the Southwest Regional Maintenance Center (SWRMC), is seeking to procure Proof Test Machine Calibration Services for a 200K Data Proof Test Machine located at Naval Base San Diego, California. The procurement involves comprehensive testing and maintenance services, including the inspection and validation of the hydraulic system, functionality checks of the software, and both low and high-end calibrations, with a contract duration spanning five years from July 1, 2025, to June 30, 2030. This service is critical for ensuring the operational integrity and compliance of the equipment used in defense operations. Interested vendors must submit their quotes by April 11, 2025, at 11:00 AM (Pacific) to the designated contacts, Michael Jones and Ricardo Barraza-Cobos, via the provided email addresses.
3 Year Primary Service Contract for Calibration System
Buyer not available
The Department of Defense, specifically the Naval Surface Warfare Center (NSWC) Philadelphia Division, is seeking a sole source contractor for a three-year primary service contract for The Modal Shop’s 9155 Calibration Station. This contract will cover essential services such as calibration of reference standards, standard calibration of all installed equipment, software upgrades, additional training, and extended warranty for all system components, which are critical for sensor calibration at the Calibration Test Facility (CTF). The procurement is vital for maintaining the operational integrity and accuracy of testing equipment used by the Navy. Interested parties can reach out to Stefan Kitzinger at stefan.b.kitzinger.civ@us.navy.mil for further details regarding this opportunity.
66--KIT,CALLIBRATION
Buyer not available
The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 15 calibration kits (NSN 6625015284833). This solicitation is part of a Combined Synopsis/Solicitation and is specifically set aside for Historically Underutilized Business (HUBZone) concerns, emphasizing the importance of supporting small businesses in the defense sector. The calibration kits are essential for measuring and testing electrical signals, which play a critical role in various defense applications. Interested vendors must submit their quotes electronically, as hard copies will not be available, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil. The deadline for quote submission is 189 days after the award date.
Lakehurst Calibration Laboratory Test Benches
Buyer not available
The Department of Defense, through the Naval Air Warfare Center Aircraft Division (NAWCAD), is seeking proposals from qualified small businesses for the procurement and installation of various laboratory test benches at the Lakehurst Calibration Laboratory in New Jersey. The project involves furnishing and installing Electronics Lab Test Benches, Production Control Test Benches, and several other specialized lab test benches, along with the removal and disposal of existing furniture, to enhance laboratory functionality and support ongoing calibration efforts. This procurement is critical for upgrading aging infrastructure and improving operational efficiency within the laboratory environment. Interested vendors must submit their proposals electronically by April 14, 2025, at 4:00 PM, to Mr. Juan Carlos Belmonte at juancarlos.r.belmonte.civ@us.navy.mil and Mr. Terrence Shearer at terrence.d.shearer.civ@us.navy.mil, ensuring compliance with all outlined requirements in the solicitation.
N0038325PR284
Buyer not available
The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting bids for the procurement of two units of a flight test set, identified by NSN: 6R4920014498072 and Part Number: ADTS405-8325. This equipment is crucial for aircraft maintenance and repair, ensuring operational readiness and safety of naval aviation assets. Interested vendors can reach out to Christopher Campellone at 215-697-2530 or via email at christopher.campellone.civ@us.navy.mil for further details regarding the solicitation process.