Contech Ultra Press Repair-Tinker AFB, OK
ID: SP3300-25-Q-0099Type: Combined Synopsis/Solicitation
Overview

Buyer

DEPT OF DEFENSEDEFENSE LOGISTICS AGENCYDLA DISTRIBUTIONNEW CUMBERLAND, PA, 17070-5008, USA

NAICS

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (811310)

PSC

MAINT/REPAIR/REBUILD OF EQUIPMENT- CONTAINERS, PACKAGING, AND PACKING SUPPLIES (J081)

Original Source

https://sam.gov/opp/672a7db087b149f68476a3736232219d/view
Timeline
    Description

    The Department of Defense, through the Defense Logistics Agency (DLA Distribution), is soliciting quotations for the repair of a Contech Ultra Press Model UP5050 at Tinker Air Force Base in Oklahoma. The procurement aims to establish a Firm-Fixed Price contract for the removal and replacement of metal cut guides and the repair of safety sensors, ensuring the machine operates according to manufacturer specifications. This initiative is crucial for maintaining operational readiness and compliance with safety standards at the facility. Interested contractors must submit their quotes electronically by the specified deadline, and for further inquiries, they can contact John Sproul at john.sproul@dla.mil or call 717-770-7285. The performance period for the project is set at 15 days following the receipt of the order.

    Point(s) of Contact
    John Sproul
    (717) 770-7285
    john.sproul@dla.mil
    Files
    Title
    Posted
    Tab 11 - CSS SP330025Q0099.pdf
    The government document SP3300-25-Q-0099 outlines a Request for Quotation (RFQ) issued by the DLA Distribution Acquisition Operations for the repair of the Contech Ultra Press UP5050 at Tinker AFB, Oklahoma. This solicitation follows Federal Acquisition Regulations (FAR) for commercial items and aims to establish a Firm Fixed Price contract. Key aspects include the solicitation’s full and open competitive nature, the applicable NAICS and PSC codes, and the requirement for offerors to be registered in the System for Award Management (SAM). The period of performance is set for 15 days after receipt of the order, and the award will be made based on the lowest acceptable bid. Offerors are required to provide proof of delivery, comply with the Service Contract Act wage determination, and submit quotes electronically by a specified deadline. The document emphasizes the need for innovative approaches that may result in cost savings, and it outlines provisions regarding conflicts of interest and safeguarding confidential information. Additionally, the RFQ mandates detailed submission requirements for price quotations, past performance references, and certifications related to the offer’s compliance with federal requirements. Overall, this RFQ is part of the government's effort to manage procurement processes effectively while encouraging competitive pricing and high standards of service delivery.
    Tab 4-Ultra Press SOW.pdf
    The Statement of Work (S.O.W.) outlines the requirements for the repair of the Contech Ultra Press Model UP 5050 at the Defense Distribution Depot Oklahoma City (DDOO). The contractor is tasked with removing and replacing upper and lower metal cut guides and repairing safety sensors to ensure the machine operates according to manufacturer specifications. Key tasks include safely shutting down the machine, inspecting parts, removing and installing guides, and conducting operational tests to verify proper functioning. The project has a performance period of 15 days, with work conducted at Tinker Air Force Base in Oklahoma. The contractor must comply with DDOO security protocols for on-site access. Final acceptance of the completed work will be conducted by designated officials from DDOO, and a written summary of activities is required upon completion. This S.O.W. highlights the government's initiative to maintain operational readiness and ensure compliance with safety standards in their facilities.
    Tab 9-Wage Determination.pdf
    This document, "Register of Wage Determinations Under the Service Contract Act," outlines wage rates and requirements for contracts subject to the Service Contract Act (SCA) in Oklahoma. It emphasizes the applicable minimum wage rates based on recent executive orders: Executive Order 14026 mandates a minimum of $17.75 per hour for contracts initiated or extended after January 30, 2022, while Executive Order 13658 applies a rate of $13.30 per hour for contracts awarded between January 1, 2015, and January 29, 2022. The file details a comprehensive list of occupations, their corresponding wage rates, and potential fringe benefits, including health and welfare, paid sick leave, and vacation entitlements. Additionally, it includes provisions for hazardous pay differentials and uniform allowances for certain employees. The document serves as a crucial reference for contractors and agencies involved in federal contracts, ensuring compliance with wage and labor regulations for workers serving on these contracts, thereby supporting equitable compensation practices in the federal service industry. This information is vital for informing bidders on federal contracts and fostering adherence to established labor standards.
    Lifecycle
    Title
    Type
    Contech Ultra Press Repair-Tinker AFB, OK
    Currently viewing
    Combined Synopsis/Solicitation
    Similar Opportunities
    Overhead Door Repair
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for the repair of an overhead door at Tinker Air Force Base, Oklahoma. The project involves a one-time repair of a southwest overhead roll-up door, requiring the contractor to provide all necessary labor, tools, equipment, materials, and transportation to replace specific components while adhering to OEM specifications and safety regulations. This repair is crucial for maintaining operational functionality at the facility, and contractors must submit their quotes by the specified closing date, ensuring compliance with detailed submission requirements. For inquiries, interested parties can contact Jacqueline Henn at Jacqueline.Henn@us.af.mil.
    UNLOAD DRIVE ASSEMB
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the repair of the Unload Drive Assembly. The procurement aims to secure a reliable repair service with a required turnaround time of 172 days, ensuring that the repaired items meet stringent operational and functional standards as outlined in the contract specifications. This assembly is critical for military operations, emphasizing the importance of timely and quality repairs to maintain operational readiness. Interested contractors should submit their quotes, including pricing and capacity constraints, to Logan W. Mann at LOGAN.W.MANN.CIV@US.NAVY.MIL by the specified deadline, with all freight costs being the responsibility of the Navy.
    29--PARTS KIT,PUMP,OVER
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of a Parts Kit for an Over Pump, specifically NSN 2915008254359. The requirement includes a quantity of 67 units to be delivered to the DLA Distribution Depot in Oklahoma within 241 days after order placement. This procurement is crucial for maintaining operational readiness and support for military aircraft, as the parts are essential components in aircraft engine systems. Interested vendors are encouraged to submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.
    Repair CTI Systems Teleplatforms
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for the repair of twelve CTI Systems Teleplatforms at Tinker Air Force Base in Oklahoma. This sole-source requirement necessitates troubleshooting and repair services, with contractors expected to provide all necessary labor, tools, equipment, and materials while adhering to manufacturer specifications and safety protocols. The teleplatforms are critical for depainting and painting processes, and the original equipment manufacturer, CTI Systems, has proprietary access to the control system, making this a specialized procurement. Proposals are due by December 15, 2025, and interested parties should contact Chelsie Hannah at chelsie.hannah@us.af.mil or Tran Tran at Tran.Tran.1@us.af.mil for further details.
    28--FITTING DIS TOOL
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of three units of the Fitting Dis Tool, identified by NSN 2815015529589. This solicitation may lead to an Indefinite Delivery Contract (IDC) with a one-year term or until the total orders reach $350,000, with an estimated three orders per year and a guaranteed minimum quantity of one. The items will be shipped to various DLA Depots both within the continental United States (CONUS) and outside (OCONUS), highlighting the importance of these tools in supporting defense logistics operations. Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil, as hard copies of the solicitation are not available.
    43--CONTROL UNIT,PUMP
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of two Control Units for pumps, identified by NSN 4320011909398. This solicitation is a Total Small Business Set-Aside, aimed at sourcing these critical components used in various military applications, ensuring operational efficiency and reliability. Interested vendors must submit their quotes electronically, as hard copies will not be available, and the deadline for submissions is 168 days after the award date. For inquiries, potential bidders can contact the DLA via email at DibbsBSM@dla.mil.
    ONE (1) C-FRAME HYDRAULIC PRESS
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one C-Frame Hydraulic Press. This equipment is required to meet specific operational needs and must be delivered with training, technical data, an IUID tag, shipping, installation, and foundation support. The hydraulic press is crucial for various manufacturing processes, emphasizing the importance of reliable machinery in defense logistics. Interested vendors should note that the solicitation is expected to be issued on December 20, 2024, and can be accessed via the DLA Intranet Bid Board System (DIBBS). For further inquiries, potential bidders can contact Edmund Quee at edmund.quee@dla.mil or by phone at 804-279-2589.
    34--DRILLING MACHINE,UP
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of two drilling machines under solicitation number NSN 3413013154541. The requirement includes the delivery of these machines within 167 days after order, with approved sources being specified in the solicitation. These drilling machines are critical for metalworking applications and support various defense operations. Interested vendors must submit their quotes electronically, as hard copies will not be available, and any inquiries should be directed to the DLA via email at DibbsBSM@dla.mil.
    Stratasys F900 3D Printer
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting quotes for the procurement of one Stratasys F900 3D Printer, as outlined in the Statement of Work (SOW). This acquisition aims to enhance the existing 3D printing capabilities of the REACT program by adding a machine that will increase throughput by 50.6%, reduce rework, and improve overall shop efficiency for producing aircraft-grade replacement parts using ULTEM 9085 material. The procurement includes the F900 system, validated material licenses, installation, a one-year warranty, and training for personnel, with delivery to Tinker Air Force Base in Oklahoma. Interested vendors must submit their quotes and any inquiries in writing by the specified closing date, and can contact Linsey Laird or Jason Shirazi via email for further information.
    DRIVE UNIT,ANGLE DR
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency, is soliciting quotes for the procurement of seven units of the DRIVE UNIT, ANGLE DR. This contract requires the manufacturer to adhere to specific quality assurance standards and inspection protocols, ensuring that the items meet the necessary military specifications and standards. The DRIVE UNIT is critical for military applications, particularly in the context of small arms and ordnance manufacturing. Interested vendors must submit their quotes by December 30, 2025, and can reach out to Jacob Garland at 445-737-2450 or via email at JACOB.GARLAND@DLA.MIL for further inquiries.