AFIT Wire EDM
ID: FA860125Q0074Type: Special Notice
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA8601 AFLCMC PZIOWRIGHT PATTERSON AFB, OH, 45433-5344, USA

NAICS

Special Die and Tool, Die Set, Jig, and Fixture Manufacturing (333514)

PSC

CUTTING TOOLS FOR MACHINE TOOLS (3455)

Original Source

https://sam.gov/opp/863e5abda1a14435ab4505f1e046fb6d/view
Timeline
    Description

    The Department of Defense, specifically the Air Force Life Cycle Management Center (AFLCMC), is seeking to procure a Sodick ALN600G 4-axis CNC Wire EDM machine to enhance the operational efficiency of the Air Force Institute of Technology (AFIT) prototype shop. The procurement aims to replace an existing machine and requires the contractor to deliver, install, and calibrate the new unit while ensuring compliance with federal regulations and specifications. This high-precision equipment is crucial for advancing research and development efforts at AFIT, utilizing proprietary Sodick controller software already in use. Interested vendors must submit their quotations via email to Jenna Sizemore and Amanda Hoyng by 10:00 AM Eastern Time on April 15, 2025, with all correspondence adhering to specified email guidelines.

    Point(s) of Contact
    JENNA L SIZEMORE
    jenna.sizemore.1@us.af.mil
    Amanda Hoyng
    amanda.hoyng@us.af.mil
    Files
    Title
    Posted
    Single Source Justification Sodick ALN 600G Pro_Signed_Redacted.pdf
    SOW SODICK ALN600G Pro.pdf
    The document outlines a Statement of Work for the procurement of a Sodick® ALN600G PRO Wire EDM machine, aimed at enhancing the operational efficiency of a prototype shop at AFIT. The machine must conform to specific dimensions, weight limits, and technological capabilities, including a 4-axis configuration, a predefined travel capacity, and compatibility with existing Sodick controller software. Key requirements also entail a range of tooling, software options, training for users, and warranties for accuracy and repairs. The contractor is responsible for the removal of an existing Sodick machine, delivery, installation, and calibration of the new unit within specified timeframes, while ensuring all procedures comply with federal regulations for logistics and hardware specifications. An emphasis is placed on sourcing products from qualifying countries, as detailed in Defense Federal Acquisition Regulation. Payment is contingent on successful installation and proof of the machine meeting the outlined specifications. Overall, this document serves to facilitate an organized and regulated procurement process for the high-precision machinery necessary for furthering research and development at the Air Force Institute of Technology.
    Lifecycle
    Title
    Type
    AFIT Wire EDM
    Currently viewing
    Special Notice
    Similar Opportunities
    24-13-1027 CNC UNIVERSAL MILLING MACHINE
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one DMC 270 FD Portal Series CNC Universal Milling Machine, as outlined in solicitation SPE4A8-25-R-0008. The updated requirements include significant enhancements such as an upgraded Siemens Sinumerik One CNC controller, increased spindle power from 40 horsepower to 56 horsepower, and the addition of safety features including grating and support structures in compliance with OSHA standards. This machine is critical for various manufacturing processes, including milling, turning, and profile grinding, and the contract is expected to be awarded following the extended closing date of December 23, 2025. Interested vendors should direct inquiries to Christina Gibbs at christina.gibbs@dla.mil.
    Intent to Sole Source - Prototrak 1845RX CNC Lathe
    Dept Of Defense
    The Department of Defense, specifically the Air Force Life Cycle Management Center (AFLCMC), intends to award a sole source contract for the procurement of a Prototrak 1845RX CNC Lathe for the Air Force Institute of Technology (AFIT) located at Wright-Patterson AFB, Ohio. The lathe must meet specific technical requirements, including an 18-inch swing over bed, a 10 HP spindle motor, and a Prototrak RLX touchscreen controller, along with necessary accessories and a two-year warranty. This equipment is crucial for enhancing the capabilities of AFIT in machining operations, and the contract will be awarded to Charles Jones Machinery Inc., the only known source capable of fulfilling these requirements. Interested parties may submit capability statements or inquiries to Bryson Pennie and Linh Jameson via email by 12:00 pm Local Time on December 18, 2025, to be considered for any potential competitive procurement.
    CNC Punch/Fiber Laser Combination Machine
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is conducting a sources sought notice to identify potential vendors for a Computer Numerically Controlled (CNC) Punch/Fiber Laser Combination Machine for the Fleet Readiness Center East located at Cherry Point, North Carolina. The procurement includes comprehensive turnkey services such as shipping, installation, training, and technical data, with specific requirements for Dell brand laptops and Siemens Step 7 software for maintenance support. This machine is critical for processing aircraft sheet metal engine components, ensuring precision in punching and laser cutting across various materials, and must comply with stringent safety and environmental standards. Interested parties are encouraged to submit their capabilities and comments on the draft statement of work by emailing AVN IPE Market Research at avnipemarketresearch@dla.mil, with responses due by the closing date listed on SAM.gov.
    Stratasys F900 3D Printer
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting quotes for the procurement of one Stratasys F900 3D Printer, as outlined in the Statement of Work (SOW). This acquisition aims to enhance the existing 3D printing capabilities of the REACT program by adding a machine that will increase throughput by 50.6%, reduce rework, and improve overall shop efficiency for producing aircraft-grade replacement parts using ULTEM 9085 material. The procurement includes the F900 system, validated material licenses, installation, a one-year warranty, and training for personnel, with delivery to Tinker Air Force Base in Oklahoma. Interested vendors must submit their quotes and any inquiries in writing by the specified closing date, and can contact Linsey Laird or Jason Shirazi via email for further information.
    Soraluce FLP 4000 Universal Floor Type 6-Axis Milling Center outfitted with the Soraluce Dynamics Active Stabilizer Plus (DAS+) or equivalent 6-Axis Universal Floor Type Milling Center with active dampening system equivalent to the DAS+.
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is conducting market research to identify vendors capable of supplying a Soraluce FLP 4000 Universal Floor Type 6-Axis Milling Center equipped with the Soraluce Dynamics Active Stabilizer Plus (DAS+) or an equivalent system. This procurement includes not only the milling center but also comprehensive turnkey services such as installation, removal of existing equipment, foundation work, shipping, tooling, training, and technical documentation. The equipment will be utilized at the Fleet Readiness Center-EAST in Cherry Point, North Carolina, highlighting its significance in supporting military readiness and operational capabilities. Interested parties are encouraged to submit their capabilities by emailing avnipemarketresearch@dla.mil, with responses due by the closing date of the SAM.gov posting, as this is a sources sought notice and not a formal solicitation.
    Plasma Cutting Machine
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking sources for a Computer Numerically Controlled (CNC) Plasma Cutting Machine to be delivered and installed at the Ship Repair Facility (SRF) in Yokosuka, Japan. The procurement requires a turn-key solution that includes the machine itself, technical data, delivery, installation, and comprehensive training for operators and maintenance personnel, adhering to various federal and Japanese industrial standards. This machine is critical for enhancing the capabilities of the U.S. Naval Ship Repair Facility, ensuring efficient and precise metal cutting operations. Interested vendors should submit their capabilities and comments on the draft statement of work by emailing AVN IPE Market Research at AVNIPEMarketResearch@dla.mil, with responses due by the closing date listed on SAM.gov.
    Advanced Multiplexed Eddy Current Array
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals from qualified small businesses for the procurement of one Advanced Multiplexed Eddy Current Array to be delivered to Tinker Air Force Base in Oklahoma. This specialized equipment must meet specific technical requirements, including a rugged design weighing less than 3.5 lbs, a frequency range of 10 Hz – 12.5 MHz, and a minimum 7-inch capacitive touch screen display with an IP65 rating, along with advanced software capabilities for C-scan recording and digital signal processing. The contract is set aside for small businesses, with proposals due by December 18, 2025, and delivery required by March 20, 2026; interested parties should direct inquiries to Madelyn Thompson at madelyn.thompson@us.af.mil or call 405-739-9120.
    22-25-1009 two(2) Fives Giddings & Lewis PT 1500 Plain Table CNC Horizontal Boring Mills (HBM) with Integrated Contouring Heads (ICH)
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of one Fives PT 1500 Plain Table CNC Horizontal Boring Mill (HBM) with an Integrated Contouring Head (ICH), with an option to purchase a second unit at a later date. This procurement aims to fulfill the government's requirements for advanced machining capabilities, which are critical for operations at the Puget Sound Naval Shipyard, including tooling, training, foundation work, and equipment removal. The solicitation has been amended to extend the closing date to December 29, 2025, and requires offers to remain valid for 120 days. Interested vendors should direct inquiries to Christina Gibbs at christina.gibbs@dla.mil for further details.
    CensiTrac Laser Instrument Marking Machine
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking to procure a CensiTrac Laser Instrument Marking Machine through a sole source justification. This specialized equipment is essential for marking instruments used in hospital settings, falling under the category of hospital furniture, equipment, utensils, and supplies. The procurement aims to enhance operational efficiency and ensure compliance with medical standards. Interested vendors can reach out to primary contact Adalie Greig at adalie.greig@us.af.mil or secondary contact Marcus Thomas at marcus.thomas.3@us.af.mil for further details regarding this opportunity.
    34--ENGRAVING SYSTEM
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of two engraving systems, identified by NSN 3417015526525. The requirement includes delivery to DLA Distribution San Diego within 156 days after order, with the approved source being 1GCR7 VLS3.60DT50. These engraving systems are critical for metalworking applications, ensuring precision and efficiency in military operations. Interested vendors must submit their quotes electronically, as hard copies of the solicitation will not be available, and inquiries can be directed to the buyer via email at DibbsBSM@dla.mil.