The Department of Defense, through the Defense Logistics Agency (DLA) Land and Maritime, is seeking proposals for the procurement of an Electromechanical Arming Unit, with a presolicitation notice indicating a total small business set-aside. The contract will require a base award quantity of 1,320 units, with an option for an additional 100% quantity, and includes specific requirements for First Article Tests (FAT) to ensure compliance with governmental standards. This item is critical for military applications and is subject to export controls, emphasizing its importance in defense operations. Interested suppliers should prepare to submit offers by the solicitation release date of September 24, 2025, and may contact Zach Shutte at zachariah.shutte@DLA.mil or by phone at 445-737-5030 for further information.

NSN or Part Number 010526055  
ITEM DESCRIPTION: <H>ARMING UNIT, ELECTROMECHANICAL</>

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES  
(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)  
RD002, COVERED DEFENSE INFORMATION APPLIES  
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT  
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS  
(MANUFACTURERS AND NON-MANUFACTURERS)  
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL  
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)  
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN  
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES  
RT001: MEASURING AND TEST EQUIPMENT  
\_\_\_\_\_\_\_\_\_\_  
RQ032: EXPORT CONTROL OF TECHNICAL DATA  
This item has technical data some or all of which is subject to  
export-control of either the International Traffic in Arms regulations  
(ITAR) or the Export Administration Regulations (EAR), and cannot be  
exported without prior authorization from either the Department of State  
or the Department of Commerce. Export includes disclosure of technical  
data to foreign persons and nationals whether located in the United  
States or abroad. This requirement applies equally to foreign national  
employees and U.S. companies and their foreign subsidiaries. DFARS  
252.225-7048 is applicable to this data.  
The Defense Logistics Agency (DLA) limits distribution of export-control  
technical data to DLA contractors that have an approved US/Canada Joint  
Certification Program (JCP) certification, have completed the  
Introduction to Proper Handling of DOD Export-Controlled Technical Data  
Training and the DLA Export-Controlled Technical Data Questionnaire  
(both are available at the web address given below), and have been  
  
approved by the DLA controlling authority to access the  
export-controlled data. Instructions for obtaining access to the  
export-controlled data can be found at:  
https://www.dla.mil/Logistics-Operations/Enhanced-Validation/  
To be eligible for award, offerors and any sources of supply proposed  
for use are required to have an approved JCP certification and have  
been approved by the DLA controlling authority to access  
export-controlled data managed by DLA. DLA will not delay award in  
order for an offeror or its supplier to apply for and receive approval  
by the DLA controlling authority to access the export-controlled data.  
\_\_\_\_\_\_\_\_\_\_  
THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN  
AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS  
REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT  
CONTROL ACT (22 U.S.C.A. 2778-2799). ANY  
MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS  
REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE  
TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.  
DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED  
PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS  
APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC  
REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER  
INELIGIBLE FOR AWARD.  
\_\_\_\_\_\_\_\_\_\_  
The Government Procuring Activity has determined that Surplus is not  
Acceptable for this NSN.  
(End of TQ Requirement)  
\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_EXCEPTION DATA\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
DRAWING 200415485 ONLY NOTES 1,3,4,10,11, AND  
12 APPLY  
\_\_\_\_\_\_\_\_\_\_\_\_\_\_END OF EXCEPTIONS\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
THE ITEM BEING PROCURED IS A CRITICAL GUN PART  
ITEM WITH UNIQUE REQUIREMENTS.  
GOVERNMENT FAT APPLIES.  
AFTER RECEIPT OF QUOTES, OFFERORS MAY BE  
CONTACTED TO PRICE THE FAT REQUIREMENT.  
TWO (2) EXHIBITS ARE REQUIRED: ONE (1)  
ASSEMBLED COATING AND ONE (1) MACHINED BUT NOT  
ASSEMBLED AND WITHOUT COATING.  
EXHIBIT DISPOSITION INSTRUCTIONS: ONE (1) PART WILL  
Page6 /10  
BE RETURNED TO THE CONTRACTOR AND CAN BE INCLUDED  
IN THE PRODUCTION QUANTITY. ONE (1) WILL BE  
DAMAGED IN TESTING.  
PRODUCT INSPECTION WILL BE CONDUCTED BY THE  
DCMA QAR AT THE ACTUAL MANUFACTURER'S FACILITY.  
THE IDENTIFICATION OF THE ACTUAL MANUFACTURER  
MUST BE SUBMITTED TO THE CONTRACTING OFFICER  
FOR INCLUSION IN THE AWARD. UPON AWARD, ANY  
CHANGES TO THE ABOVE MUST BE APPROVED BY THE  
PCO VIA FORMAL CONTRACT MODIFICATION.  
PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE  
WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE  
REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST  
BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN  
THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED  
DURING TESTING.  
PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>  
WILL BE PERFORMED PRIOR TO ACCEPTANCE OF  
EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE  
PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED  
IN THE PRODUCTION OF PARTS ON THIS CONTRACT.  
FIVE (5) PVT SAMPLES, UNLESS OTHERWISE  
SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED  
TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT  
IN FOR TESTING.  
CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.  
\_\_\_\_\_\_\_\_\_\_  
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE  
USED NOR INCORPORATED IN ANY ITEMS TO BE  
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION  
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT  
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.  
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR  
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE  
SPECIFICATION REQUIREMENTS.  
\_\_\_\_  
WHEN FIRST ARTICLE IS REQUIRED IN THE  
CONTRACT, THE CONTRACTOR SHALL MARK THE OUTER  
SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS  
"FIRST ARTICLE". THE CONTRACTOR SHALL ALSO  
PROVIDE THE TESTING FACILITY WRITTEN  
NOTIFICATION OF WHEN THE FIRST ARTICLES  
EXHIBITS WILL BE SHIPPED TWO WEEKS BEFORE THE  
SHIP DATE.  
  
CRITICAL APPLICATION ITEM  
IAW BASIC DRAWING NR 98752 7631354  
REVISION NR L DTD 01/11/2005  
PART PIECE NUMBER: 7631354-10  
IAW REFERENCE DRAWING NR 98752 7842728  
REVISION NR K DTD 10/25/2015  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98752 200415485  
REVISION NR E DTD 01/30/2020  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12054  
REVISION NR E DTD 11/03/1983  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12055  
REVISION NR D DTD 07/12/2019  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 18894 65C12057  
REVISION NR F DTD 09/04/2007  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 18894 65B11917  
REVISION NR C DTD 11/14/1972  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 18894 65C12057-07A1004  
REVISION NR F DTD 08/05/2007  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12054-72662  
REVISION NR C DTD 03/23/1972  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12054-83A304  
REVISION NR E DTD 11/23/1983  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12054-91A001  
REVISION NR E DTD 12/12/1990  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12055-72663  
REVISION NR C DTD 03/22/1972  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12055-91A212  
REVISION NR D DTD 08/14/1991  
PART PIECE NUMBER:  
Page8 /10  
IAW REFERENCE DRAWING NR 98747 65B12055-94A078  
REVISION NR E DTD 06/23/1994  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 7227131-79A043  
REVISION NR B DTD 01/05/1979  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 7227131-91A005  
REVISION NR B DTD 01/05/1991  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 7227131-91A248  
REVISION NR B DTD 08/15/1991  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B11917-72759  
REVISION NR C DTD 11/20/1972  
PART PIECE NUMBER:  
IAW REFERENCE QAP 16236 SQAP010526055  
REVISION NR A DTD 02/28/2017  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 7227131  
REVISION NR B DTD 01/01/1939  
PART PIECE NUMBER:

Total Small Business Set-Aside (FAR 19.5)

ARMING UNIT, ELECTROMECHANICAL

Solicitation Number: SPE7L125R0119

PR: 7010231650

NSN or Part Number: 010526055

Item Description: ARMING UNIT, ELECTROMECHANICAL

Base Award Quantity: 1,320

Unit of Issue: EA

Option Quantity: 100%; this may or may not be exercised at the time of award.

Destination Information:

DODAAC :  SW3210

DLA Distribution Depot Hill

7537 Wardleigh RD

Hill AFB, UT 84056-5734

Delivery Schedule: 123 Days

First Article Tests (FAT): Yes, two units required for Governmental Testing. Two units will be included in overall award quantity.

This is an Total Small business Set-Aside solicitation (Full and Open Competition after exclusion of sources) and will be solicited per FAR part 15; DAG 5.207(d)(2)(iv).

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance as described in the solicitation.

FOB and Inspection/Acceptance points as required per the solicitation.

The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about **09/24/2025**;  This acquisition is for supplies for which the Government does not possess complete unrestrictive technical data; therefore, the Government intends to solicit and contract for only approved sources under the authority of 10USC2304(c)(1).

Based on market research this item is manufactured for military use only and is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item.  However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item with 15 days of this notice.  Users not having access to the Internet may contact the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA  19111-5094.  Patterns, Drawings, Deviations Lists, Purchase Description, etc., are not stocked at the DODSSP.

One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the US by the Trade Agreements Act of 1979.  All offers shall be in the English language and in US dollars.  All interested suppliers may submit an offer.

NSN or Part Number 010526055  
ITEM DESCRIPTION: <H>ARMING UNIT, ELECTROMECHANICAL</>

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES  
(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)  
RD002, COVERED DEFENSE INFORMATION APPLIES  
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT  
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS  
(MANUFACTURERS AND NON-MANUFACTURERS)  
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL  
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)  
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN  
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES  
RT001: MEASURING AND TEST EQUIPMENT  
\_\_\_\_\_\_\_\_\_\_  
RQ032: EXPORT CONTROL OF TECHNICAL DATA  
This item has technical data some or all of which is subject to  
export-control of either the International Traffic in Arms regulations  
(ITAR) or the Export Administration Regulations (EAR), and cannot be  
exported without prior authorization from either the Department of State  
or the Department of Commerce. Export includes disclosure of technical  
data to foreign persons and nationals whether located in the United  
States or abroad. This requirement applies equally to foreign national  
employees and U.S. companies and their foreign subsidiaries. DFARS  
252.225-7048 is applicable to this data.  
The Defense Logistics Agency (DLA) limits distribution of export-control  
technical data to DLA contractors that have an approved US/Canada Joint  
Certification Program (JCP) certification, have completed the  
Introduction to Proper Handling of DOD Export-Controlled Technical Data  
Training and the DLA Export-Controlled Technical Data Questionnaire  
(both are available at the web address given below), and have been  
  
approved by the DLA controlling authority to access the  
export-controlled data. Instructions for obtaining access to the  
export-controlled data can be found at:  
https://www.dla.mil/Logistics-Operations/Enhanced-Validation/  
To be eligible for award, offerors and any sources of supply proposed  
for use are required to have an approved JCP certification and have  
been approved by the DLA controlling authority to access  
export-controlled data managed by DLA. DLA will not delay award in  
order for an offeror or its supplier to apply for and receive approval  
by the DLA controlling authority to access the export-controlled data.  
\_\_\_\_\_\_\_\_\_\_  
THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN  
AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS  
REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT  
CONTROL ACT (22 U.S.C.A. 2778-2799). ANY  
MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS  
REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE  
TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.  
DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED  
PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS  
APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC  
REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER  
INELIGIBLE FOR AWARD.  
\_\_\_\_\_\_\_\_\_\_  
The Government Procuring Activity has determined that Surplus is not  
Acceptable for this NSN.  
(End of TQ Requirement)  
\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_EXCEPTION DATA\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
DRAWING 200415485 ONLY NOTES 1,3,4,10,11, AND  
12 APPLY  
\_\_\_\_\_\_\_\_\_\_\_\_\_\_END OF EXCEPTIONS\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
THE ITEM BEING PROCURED IS A CRITICAL GUN PART  
ITEM WITH UNIQUE REQUIREMENTS.  
GOVERNMENT FAT APPLIES.  
AFTER RECEIPT OF QUOTES, OFFERORS MAY BE  
CONTACTED TO PRICE THE FAT REQUIREMENT.  
TWO (2) EXHIBITS ARE REQUIRED: ONE (1)  
ASSEMBLED COATING AND ONE (1) MACHINED BUT NOT  
ASSEMBLED AND WITHOUT COATING.  
EXHIBIT DISPOSITION INSTRUCTIONS: ONE (1) PART WILL  
Page6 /10  
BE RETURNED TO THE CONTRACTOR AND CAN BE INCLUDED  
IN THE PRODUCTION QUANTITY. ONE (1) WILL BE  
DAMAGED IN TESTING.  
PRODUCT INSPECTION WILL BE CONDUCTED BY THE  
DCMA QAR AT THE ACTUAL MANUFACTURER'S FACILITY.  
THE IDENTIFICATION OF THE ACTUAL MANUFACTURER  
MUST BE SUBMITTED TO THE CONTRACTING OFFICER  
FOR INCLUSION IN THE AWARD. UPON AWARD, ANY  
CHANGES TO THE ABOVE MUST BE APPROVED BY THE  
PCO VIA FORMAL CONTRACT MODIFICATION.  
PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE  
WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE  
REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST  
BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN  
THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED  
DURING TESTING.  
PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>  
WILL BE PERFORMED PRIOR TO ACCEPTANCE OF  
EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE  
PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED  
IN THE PRODUCTION OF PARTS ON THIS CONTRACT.  
FIVE (5) PVT SAMPLES, UNLESS OTHERWISE  
SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED  
TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT  
IN FOR TESTING.  
CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.  
\_\_\_\_\_\_\_\_\_\_  
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE  
USED NOR INCORPORATED IN ANY ITEMS TO BE  
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION  
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT  
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.  
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR  
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE  
SPECIFICATION REQUIREMENTS.  
\_\_\_\_  
WHEN FIRST ARTICLE IS REQUIRED IN THE  
CONTRACT, THE CONTRACTOR SHALL MARK THE OUTER  
SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS  
"FIRST ARTICLE". THE CONTRACTOR SHALL ALSO  
PROVIDE THE TESTING FACILITY WRITTEN  
NOTIFICATION OF WHEN THE FIRST ARTICLES  
EXHIBITS WILL BE SHIPPED TWO WEEKS BEFORE THE  
SHIP DATE.  
  
CRITICAL APPLICATION ITEM  
IAW BASIC DRAWING NR 98752 7631354  
REVISION NR L DTD 01/11/2005  
PART PIECE NUMBER: 7631354-10  
IAW REFERENCE DRAWING NR 98752 7842728  
REVISION NR K DTD 10/25/2015  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98752 200415485  
REVISION NR E DTD 01/30/2020  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12054  
REVISION NR E DTD 11/03/1983  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12055  
REVISION NR D DTD 07/12/2019  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 18894 65C12057  
REVISION NR F DTD 09/04/2007  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 18894 65B11917  
REVISION NR C DTD 11/14/1972  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 18894 65C12057-07A1004  
REVISION NR F DTD 08/05/2007  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12054-72662  
REVISION NR C DTD 03/23/1972  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12054-83A304  
REVISION NR E DTD 11/23/1983  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12054-91A001  
REVISION NR E DTD 12/12/1990  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12055-72663  
REVISION NR C DTD 03/22/1972  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B12055-91A212  
REVISION NR D DTD 08/14/1991  
PART PIECE NUMBER:  
Page8 /10  
IAW REFERENCE DRAWING NR 98747 65B12055-94A078  
REVISION NR E DTD 06/23/1994  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 7227131-79A043  
REVISION NR B DTD 01/05/1979  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 7227131-91A005  
REVISION NR B DTD 01/05/1991  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 7227131-91A248  
REVISION NR B DTD 08/15/1991  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 65B11917-72759  
REVISION NR C DTD 11/20/1972  
PART PIECE NUMBER:  
IAW REFERENCE QAP 16236 SQAP010526055  
REVISION NR A DTD 02/28/2017  
PART PIECE NUMBER:  
IAW REFERENCE DRAWING NR 98747 7227131  
REVISION NR B DTD 01/01/1939  
PART PIECE NUMBER:

Buyer

NAICS

PSC

Set Aside

Original Source