The Federal Protective Service (FPS) has outlined detailed uniform specifications for Unisex Special Ops Black Boots (FPS-001). These boots are designed for rugged durability and comfort, featuring a Cordura and full-grain leather upper, a Vibram oil-resistant outsole, and a waterproof SympaTex barrier. Key features include a water-friendly PU midsole, nylon shank, and a washable, anti-microbial Ortholite custom-molded footbed for breathability and moisture-wicking. The design also incorporates 2-inch ankle support webbing, rubberized toe and heel reinforcements for abrasion resistance, and a fully gusseted tongue to prevent debris entry. Smooth-pulling tunnel eyelets ensure even lace tightening. The boots are available in stock sizes 4-14.

The Federal Protective Service (FPS) has issued uniform specifications for a men's long-sleeve shirt, identified as FPS-002. This document, likely part of a federal government RFP, details the required material composition of 74% polyester, 25% wool, and 1% Lycra, with a navy color. Key product characteristics include a long-sleeve design, a banded collar, two-button cuffs with a button sleeve placket, and heavy-duty interlining in critical areas such as the collar, epaulets, pocket flaps, and cuffs. The shirt features pleated pockets with scalloped flaps and hook-and-loop closures. Customization requirements specify FPS emblems on both sleeves. Stock sizes range from 14.5/32 to 20/38. These specifications ensure uniformity and quality for FPS personnel attire.

The Federal Protective Service (FPS) has outlined detailed specifications for a Dark Navy Patrol Jacket (FPS-004), likely for an RFP. The jacket requires a 100% Nylon outer shell and liner in Midnight Navy. Key features include a reversed zipper front with a concealed snap storm flap, elastic adjustable cuffs, multiple concealed and hand warmer pockets, and a zippered Napoleon pocket. The design incorporates an Acclimate zip-in system with a zip-out primaloft liner, a detachable hood, and pit zips for ventilation and weapons access. Additional features include nylon mic clips, microfleece lining in the neck and hand warmer pockets, Cordura lining to prevent wear from duty belts, and a Durable Water Resistant finish. Customization includes FPS shoulder emblems, a police badge emblem, and "Police" drop-downs on the front and back. The jacket will be available in stock sizes from S-XL (short) and S-5XL (regular).

The FEDERAL PROTECTIVE SERVICE (FPS) has outlined specifications for a Police Safety Vest, identified as FPS-005, which is likely part of a federal government Request for Proposal (RFP). The vest must be made of 100% polyester in yellow and feature a hook and loop front closure with adjustable sides. Key safety elements include 2-inch silver reflective striping. Customization requirements specify an FPS gold and navy police emblem on the left front chest and “POLICE” screened in black ink on the center back. The available stock sizes range from RG/SM to RG/2X3. These detailed specifications ensure standardization and compliance for safety equipment used by FPS personnel.

The Federal Protective Service (FPS) has issued uniform specifications (FPS-006) for a lime green reversible raincoat. This raincoat, made of 100% nylon, is black and lime green, with the lime green side offering high visibility. Key features include factory-sealed seams, a full raglan sleeve, a snap front with a reversible zipper, a two-piece collar, a detachable hood, adjustable sleeve cuffs, cut-thru pockets, and badge tabs on both sides. Reflective material is strategically placed on the cuffs, inside placket, back, and sleeves. Customization involves a 3-inch reflective screen-print of "POLICE" on the inside center back. The raincoat is available in stock sizes from RG/S to RG/6XL. This document outlines the precise requirements for a functional and safety-compliant uniform item for the FPS.

The Federal Protective Service (FPS) has outlined detailed uniform specifications for a Dark Navy Special Agent Patrol Jacket (FPS-007). The jacket must feature a 100% nylon outer shell and liner, in Midnight Navy color. Key product characteristics include a reversed zipper front with a concealed snap storm flap, elastic adjustable cuffs, multiple concealed and hand warmer pockets, and a zippered Napoleon pocket. It also incorporates an Acclimate zip-in system for climate control with a zip-out liner, a detachable tuckaway hood, and pit zips for weapons access and ventilation. Additional features include nylon mic clips, micro fleece lining on the neck and hand warmer pockets, Cordura lining to prevent duty belt wear, a Durable Water Resistant finish, and cinch cords for waist adjustment. Customization requires "Police" drop-downs on the front and back. The jacket will be available in stock sizes from S-XL (short) and S-5XL (regular).

The Federal Protective Service (FPS) has issued uniform specifications for a navy crew t-shirt, designated FPS-009. This document, likely part of a federal RFP, details the required fabric content as 100% navy cotton. Key style descriptions include an extra-long, one-inch, no-roll, high-density collar, double-needle tailoring, 4.5-ounce ring-spun cotton with moisture-wicking technology, a tapered fit, and a 6 oz fabric weight. The t-shirt will be available in stock sizes ranging from S to 3XL. These specifications ensure consistency and quality for uniform components within the FPS.

The Federal Protective Service (FPS) has issued uniform specifications, FPS-010, for a black crew neck t-shirt. This document outlines the required fabric content and color, specifying 100% black cotton. Key style descriptions include an extra-long cut, a one-inch no-roll high-density collar, double-needle tailoring, 4.5-ounce ring-spun cotton with moisture-wicking technology, a tapered fit, and a 6 oz fabric weight. The t-shirt will be available in stock sizes from S to 3XL. This specification is likely part of an RFP for procurement of uniforms for FPS personnel.

The Federal Protective Service (FPS) has issued uniform specifications for a SS Navy Police Polo (FPS-011). The polo must be 100% polyester, navy in color, and feature a no-roll collar, a 3-button placket with a mic tab, and a pen/pencil pocket on the sleeve. Key product characteristics include anti-microbial, moisture-wicking, and quick-drying properties, along with side gussets. Customization requires a Police Badge emblem on the left upper front. The polo will be available in stock sizes ranging from SS/XS to SS/4XL. These specifications are likely part of a federal government Request for Proposal (RFP) for the procurement of uniforms for the Federal Protective Service, outlining the precise requirements for vendors.

The Federal Protective Service (FPS) has issued uniform specifications for an "SS Red Police Polo," designated FPS-012. This document outlines the material, color, product characteristics, customization, and available stock sizes for the polo shirt. The shirt is to be made of 100% polyester and be red in color. Key features include a no-roll collar, a three-button placket with a mic tab, a pen/pencil pocket on the sleeve, and anti-microbial, moisture-wicking, and quick-drying properties, along with side gussets. Customization requires a "Police Badge emblem" on the left upper front. The polo will be available in sizes from SS/XS to SS/4XL. This specification likely serves as a guideline for procurement within federal government RFPs for uniform suppliers.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for the SS Navy Special Agent Polo (FPS-013). This uniform specification is likely part of a federal government Request for Proposal (RFP) for procurement. The polo must be 100% polyester, navy blue, and feature a no-roll collar, a 3-button placket with a mic tab, and a pen/pencil pocket on the sleeve. Key characteristics include anti-microbial, moisture-wicking, and quick-drying properties, along with side gussets. Customization requires a Special Agent Badge emblem on the left upper front. The polo will be available in stock sizes ranging from SS/XS to SS/4XL.

This document outlines the specifications for the FEDERAL PROTECTIVE SERVICE SS Red Special Agent Polo, model FPS-014. The polo is made of 100% polyester in red, featuring a no-roll collar, a 3-button placket with a mic tab, and a pen/pencil pocket on the sleeve. It includes anti-microbial, moisture-wicking, and quick-drying properties, along with side gussets. Customization requires a Special Agent Badge emblem on the left upper front. The polo is available in stock sizes from SS/XS to SS/4XL. These specifications are part of a government request for proposal for uniforms.

The Federal Protective Service (FPS) has issued uniform specifications for a long-sleeve navy polo shirt (FPS-015). This document outlines the required material, color, and product characteristics for the polo, which include 100% polyester, navy color, a no-roll collar, a 3-button placket with mic tab, a pen/pencil pocket on the sleeve, anti-microbial, moisture-wicking, and quick-drying properties, and side gussets. Customization requires a Police Badge emblem on the left upper front. The polo will be available in stock sizes ranging from SS/XS to SS/6XL. These specifications are crucial for vendors responding to federal government RFPs for uniform procurement.

The FEDERAL PROTECTIVE SERVICE (FPS) has outlined detailed specifications for a new uniform item: the LS Red Police Polo (FPS-016). This document, likely part of a federal RFP, details the material, color, product characteristics, and customization requirements for the polo. Key features include 100% polyester material, a no-roll collar, a 3-button placket with a mic tab, a pen/pencil pocket, and anti-microbial, moisture-wicking, and quick-drying properties. The polo will also feature side gussets and a police badge emblem on the left upper front. Available in stock sizes from RG/XS to RG/4XL, these specifications ensure standardization and quality for FPS uniforms, emphasizing functionality and durability for law enforcement personnel.

The Federal Protective Service (FPS) has issued uniform specifications for a "LS Navy Special Agent Polo" (FPS-017). This document outlines the required material, color, product characteristics, customization, and available stock sizes for the polo shirt. Key specifications include a 100% polyester navy fabric with a no-roll collar, a 3-button placket with a mic tab, and a pen/pencil pocket on the sleeve. The material must also be anti-microbial, moisture-wicking, and quick-drying, with side gussets for comfort and functionality. A

The Federal Protective Service (FPS) has issued uniform specifications for a "LS Red Special Agent Polo," designated as FPS-018. This document outlines the required material, color, product characteristics, customization, and stock sizes for the polo shirt. The shirt must be 100% polyester and red. Key features include a no-roll collar, a 3-button placket with a mic tab, a pen/pencil pocket on the sleeve, and anti-microbial, moisture-wicking, and quick-drying properties, along with side gussets. A "Special Agent Badge" emblem is to be customized on the left upper front. The polo will be available in stock sizes ranging from SS/XS to SS/4XL.

The FEDERAL PROTECTIVE SERVICE (FPS) Uniform Specification FPS-019 outlines the requirements for a Garrison Hat. This specification details the material, color, and product characteristics for the hat, which is 100% polyester with a navy hat, black bill, and black band. Customization includes gold DHS buttons, and available sizes range from RG/634 to RG/800. This document serves as a guideline for procurement within federal government RFPs, ensuring standardization and adherence to FPS uniform regulations.

This document, FPS-021, details the specifications for a Garrison Hat for a Chief within the Federal Protective Service. The uniform hat is made from 55% polyester and 45% wool, featuring a navy hat with a black bill, a gold band, and "Scrambled Eggs." It is customized with gold DHS buttons and is available in sizes RG/634-RG/800. This document serves as a uniform specification, likely part of a larger procurement or RFP process for federal government attire.

The FEDERAL PROTECTIVE SERVICE (FPS) Uniform Specification FPS-023 outlines the requirements for a black knit cap. The cap must be made of 100% acrylic, be black in color, and feature a fine rib and super stretch acrylic knit cuff. The specification notes that there is no customization required and it is available in one size. This document is likely part of an RFP for the procurement of uniform components for the FPS.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued Specification FPS-024 for a Navy Clip-On Tie. This specification details the material, color, performance requirements, and stock size for the ties. The ties must be made of 75% polyester and 25% wool, in navy color. They are required to have a tropical weave, be pre-tied clip-on, feature a black metal clip, and attach to a shirt with three buttonholes. The specified stock size for the ties is 15 inches. This document likely serves as part of a government Request for Proposal (RFP) for the procurement of these specific uniform items.

The Federal Protective Service (FPS) has issued Specification FPS-025 for a Navy Clip-On Tie. This specification details the required materials, color, performance characteristics, and stock size for the ties. The ties must be made of 75% polyester and 25% wool, be navy in color, feature a tropical weave, and be pre-tied with a black metal clip. They must also have three buttonholes for attachment to a shirt and be 18 inches in length. This document, likely part of a federal government Request for Proposal (RFP), outlines the specific requirements for procuring these uniform accessories for FPS personnel.

The Federal Protective Service (FPS) has issued Specification FPS-026 for a Navy Clip-On Tie. This specification outlines the requirements for a tie made of 75% polyester and 25% wool, in navy color. Key performance features include a tropical weave, a pre-tied clip-on design with a black metal clip, and three buttonholes for shirt attachment. The required stock size for the tie is 20 inches. This document serves as a detailed guideline for vendors to supply ties meeting the specific needs of the FPS, likely for uniform purposes within federal government operations.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued Specification FPS-027 for a Navy Clip-On Tie. This specification details the required materials, colors, and performance characteristics for the tie. It must be made from 75% polyester and 25% wool, be navy in color, and feature a tropical weave. The tie must be pre-tied, clip-on, include a black metal clip, and have three buttonholes for attachment to a shirt. The specified stock size for the tie is 22 inches. This document likely serves as a procurement specification within a federal government RFP, outlining the exact requirements for a uniform component.

The Federal Protective Service (FPS) has issued uniform specifications for a unisex gold metal tie clip, identified as FPS-028. This document outlines the required material as metal and the color as gold. Customization is not applicable for this item, and it is available in one stock size. These specifications are part of the detailed requirements typically found in government RFPs, ensuring standardization and adherence to uniform policy for federal personnel.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued Specification FPS-030 for a glove holder. This specification details the requirements for a 100% nylon, black glove holder, measuring 4" X 3". It is designed to fit duty belts up to 2-1/4" wide and is offered in one size. This document is likely part of an RFP, outlining the specific product characteristics required for procurement by federal agencies.

The Federal Protective Service (FPS) has issued Uniform Specification FPS-031 for a Unisex Nylon Radio Holder. This specification outlines the requirements for a universal radio holder made from 100% black nylon. Key characteristics include trilaminate contour molded technology with a Coptex knit lining and an elastic security strap with snap closures. The product is designed to be one-size-fits-all, with no customization options specified. This document is likely part of an RFP for the procurement of uniform accessories for the FPS.

The FEDERAL PROTECTIVE SERVICE (FPS) Uniform Specification FPS-032 outlines the requirements for Gold Star Jacket Insignia. These insignia must be made of gold-colored metal with a high-shine finish, featuring a clutch-back design. They are to be packaged two per pack, with each star measuring approximately 1 inch in height and width. The specification indicates no customization options and a one-size stock availability. This document serves as a clear guideline for the procurement of uniform components within federal government RFPs, ensuring standardization and quality for FPS personnel.

The Federal Protective Service (FPS) has issued a uniform specification, FPS-033, for Gold Star Jacket Insignia. This specification details the required characteristics for the insignia, which include a metal, high-shine finish, and a gold color. The insignia is designed with a clutch back style and is packaged two per pack, with each star measuring approximately 1 inch tall by 1 inch wide. The specification notes that there are no customization options and the insignia is available in one stock size. This document serves as a clear guideline for the procurement of these specific uniform components for the Federal Protective Service.

The FEDERAL PROTECTIVE SERVICE (FPS) Uniform Specification FPS-034 outlines the requirements for Gold Star Jacket Insignia. These insignia must be made of gold-colored metal with a high-shine finish. Each star is approximately 1 inch by 1 inch and features a clutch back. They are packaged two per pack and are available in one stock size, with no customization options. This specification ensures uniformity and quality for the insignia used by the FPS.

The Federal Protective Service (FPS) Uniform Specification FPS-0035 details the requirements for Silver Eagle Collar Metal Insignia. These insignia must be made of metal with a high-shine silver finish, designed to be durable and scratch-resistant. Each insignia features two mirrored eagles and a double clutch back, packaged as one pair per pack. The specification applies to the Office of Border Patrol (OBP) and the Office of Air and Marine (OAM), indicating a standardized uniform component for these federal agencies.

The document outlines the specifications for a Ranger Style Leather Belt, model FPS-036, for the Federal Protective Service. Key specifications include a material of 12oz. black leather, a width of 1 1/2 inches, a plain design, and ranger style billets. The belt is designed for unisex sizing and is available in stock sizes from RG/26 to RG/58. There are no customization options specified for this item. This document, likely part of a federal government Request for Proposal (RFP) or a similar procurement document, details the exact requirements for a uniform component, ensuring standardization and compliance for federal protective personnel.

The Federal Protective Service (FPS) Uniform Specification details the requirements for a Black Flex-Fit Police Ball Cap, identified as FPS-037. The cap must be made of 84% Nylon, 14% Cotton, and 2% Spandex, in black. Key characteristics include a low profile and a six-panel design. Customization requires a black and pewter hat badge embroidery featuring the “Police Badge Logo” centered in pewter thread on the front. Stock sizes range from RG/SM to RG/LXL. This document, likely part of a federal government RFP, outlines the specific uniform component for the FPS, ensuring standardization and compliance for official attire.

This document outlines the specifications for Men's Dark Navy Poly Wool Duty Trousers (FPS-038) for the Federal Protective Service. The trousers are made from a blend of 74% polyester, 25% wool, and 1% Lycra, and are navy in color. Key characteristics include a brass ratcheting zipper, crush-proof hook and eye closure, French fly tab, specific pocket designs with bartacks and button-tab closure on the left hip pocket, a comfort cool-flex waistband, bartacks at all stress points, crotch lining, and Lycra stretch for enhanced fit and comfort. The trousers are to be hemmed to size and are available in stock sizes ranging from 28R/37U to 54R/37U. This specification is likely part of a federal government RFP for uniform procurement.

The document, FPS-039, outlines the uniform specifications for women's dark navy poly wool duty trousers for the Federal Protective Service. These trousers are made from a blend of 74% polyester, 25% wool, and 1% Lycra in a navy color. Key product characteristics include a brass ratcheting zipper, crush-proof hook and eye closure, quarter-top front pockets, double-welt topstitched hip pockets with a button-tab left pocket closure, a comfort cool-flex waistband, and bartacks at all stress points. The trousers offer Lycra stretch for increased fit and comfort, are hemmed to size, and are available in stock sizes ranging from 04R/36U to 24R/36U.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued uniform specifications (FPS-040) for a male black 4.5” boot. Key features include a leather and nylon upper, black color, side zipper, slip and oil-resistant rubber outsole, and lace-up design with eyelets. The boots are available in stock sizes ranging from 4.5M to 14M and 7W to 14W, with no customization options. These specifications are crucial for vendors bidding on federal government RFPs related to uniform procurement for the FPS.

The Federal Protective Service (FPS) requires unisex engraved metal nameplates, identified by the specification FPS-041. These nameplates must be gold-colored metal, durable, and scratch-resistant. Each nameplate will feature the employee's last name and first initial, engraved in upper-case black letters. The design includes two pins for attachment to a shirt, and they are available in one stock size. This specification outlines the precise requirements for these customized nameplates, ensuring uniformity and quality for FPS personnel.

The Federal Protective Service (FPS) has issued uniform specifications for unisex black crew socks, designated FPS-042. These socks must be composed of 88% Acrylic, 8% Stretch Nylon, and 4% Elastic, and be black in color. Key product characteristics include an over-the-calf design, extra-cushioned foot, welt top, knit-in heel and toe, reinforced heel and toe, and arch support. Customization requires DHS or component-specific branding. The socks are available in stock sizes ranging from RG/S to RG/XL. These specifications are crucial for ensuring uniformity and quality in the procurement of essential uniform items for FPS personnel.

The Federal Protective Service (FPS) has issued a uniform specification, FPS-043, for a unisex black chemical agent pouch. This specification details the required characteristics for the pouch, including its construction from 100% nylon in black color. Key product features include a loop designed to attach to a 2 ¼ inch duty belt and a single snap closure. The pouch is specifically designed to hold Punch II pepper spray canisters. The specification notes that no customization is available and it will be provided in one stock size.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued uniform specifications for a Black Nylon Belt Keeper, designated FPS-044. This document, likely part of an RFP, details the material, color, and product characteristics required for this accessory. The belt keeper must be made of 100% black nylon, feature a 1" web design, and have a dual snap closure. It is specified as "One Size" for stock sizing and does not allow for customization. These specifications ensure uniformity and compliance for FPS personnel equipment.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for a Black Nylon Silent Key Ring Holder (FPS-045). This accessory must be made of 100% nylon, black in color, and feature a wraparound hook and loop closure. It is designed to accommodate both 2-inch and 2.25-inch belts and is available in one stock size. The document specifies no customization options. This specification is likely part of an RFP for procurement of uniform components for the FPS.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for a black nylon light pouch, identified as model FPS-046. The pouch must be made of 100% nylon and be black in color. Its product characteristics dictate that it must accommodate a light with a maximum diameter of 1.188 inches and a length between 4.375 and 5 inches. The specifications indicate that there are no customization options and that the pouch is available in 'One Size' only. This document serves as a standard specification for procurement within federal government RFPs for uniform components.

The Federal Protective Service (FPS) has issued a Uniform Specification (FPS-048) for Silver Oak Leaf Metal Insignia. This specification outlines the required characteristics for the insignia, which include a metal construction with a high-shine silver finish. The product must be scratch-resistant, durable, and capable of securely attaching a clutch to thick fabrics, such as those found on an Ike jacket. Each insignia features an oak leaf design with a clutch back and is packaged two per pack. The specification notes that there are no customization options and the insignia is a one-size-fits-all item. This document likely serves as a standard for procurement within government RFPs for uniform components.

The

The "Double Gold Star Shirt Insignia" specification (FPS-050) from the Federal Protective Service outlines the requirements for a uniform insignia. Made of metal with a high shine gold finish, the insignia features a clutch back and comes packaged with two stars per pack. Each star is approximately ½ inch tall by ½ inch wide, and the product is a one-size, non-customizable item. This document details the specific characteristics for procurement, likely for federal government RFPs related to uniform components.

This document, FPS-051, outlines the specifications for a three gold star shirt insignia for the FEDERAL PROTECTIVE SERVICE. The insignia is made of gold metal with a high shine finish, features a clutch back, and is packaged two per pack. Each star is approximately ½ inch tall by ½ inch wide, and the product is a one-size, non-customizable item. This document serves as a uniform specification, likely for procurement purposes within a federal government RFP context, detailing the exact requirements for this specific item of uniform.

The Federal Protective Service (FPS) has issued uniform specifications, FPS-052, detailing requirements for a subdued police badge emblem. The emblem features gray and black thread, measuring approximately 2 5/8 inches wide by 3 ¾ inches high, and is available in one stock size. These specifications are likely part of a federal government RFP for uniform procurement or a similar federal contract, ensuring standardization and adherence to visual guidelines for FPS personnel.

The document specifies the uniform emblem for the Federal Protective Service (FPS), identified as FPS-053. This unisex police badge emblem features navy and gold thread, measuring approximately 2 5/8” W x 3 ¾” H, and is available in one stock size. This specification likely serves as a standard for procurement within government RFPs related to uniform supplies for the FPS.

The provided document, FPS-054, details the uniform specifications for the Federal Protective Service (FPS), specifically outlining the design of their police badge emblem. The emblem is described as having a brown and tan thread, with approximate dimensions of 2 5/8 inches in width and 3 3/4 inches in height. It is designated as a one-size item. This document, likely part of a federal government RFP, provides precise requirements for uniform components to ensure standardization and adherence to FPS branding guidelines.

The Federal Protective Service (FPS) has issued uniform specifications for a Special Agent Badge Emblem, identified as FPS-055. This emblem is characterized by gold and navy thread, measuring approximately 2 5/8” W x 3 ¾” H, and is available in one stock size. These specifications are likely part of an RFP or procurement process for uniform components, ensuring standardization for FPS personnel.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for a subdued shoulder emblem, specifically the FPS-056 style. This emblem is characterized by a black background with a gray border and lettering. It must incorporate the U.S. Department of Homeland Security Seal. The dimensions are approximately 3 ½ inches wide by 4 ½ inches high, and it is available in one stock size. This specification is likely part of a federal government RFP, outlining precise design and material standards for uniform components.

The document outlines the specifications for the FEDERAL PROTECTIVE SERVICE UNIFORM SHOULDER EMBLEM, identified as FPS-057. This unisex emblem features a navy background with a gold border and lettering. It must include the U.S. DEPARTMENT OF HOMELAND SECURITY SEAL. The emblem's approximate dimensions are 3 ½” wide by 4 ½” high, and it is available in one stock size. These specifications are crucial for ensuring uniformity and compliance in federal government procurements related to uniforms.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued Uniform Specifications FPS-058 for a Tactical Rigger Belt. This document, likely part of a federal government RFP, details the required material, color, and product characteristics for the belt. Key specifications include 100% Nylon material, Tan color, 1.75-inch wide webbing with a 7,000-lb tensile strength, hook and loop closure, and parachute-grade buckles meeting PIA-H-7195 standards. Customization is not applicable, and stock sizes range from RG/S to RG/L. The purpose of these specifications is to ensure all procured tactical rigger belts meet the stringent requirements for durability, safety, and functionality for FPS personnel.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued uniform specifications for a Holster with Flashlight Holder, designated FPS-060. This specification outlines the requirements for a black, nylon-look molded plastic holster featuring a Self Locking System (SLS), designed for right-hand use. Its mid-ride position ensures weapon protection, while the top draw and straight drop cant facilitate quick access. The holster is compatible with various pistols and revolvers, specifically accommodating the Glock 22 pistol. There are no customization options, and it is available in one size. This document is likely part of an RFP, detailing the exact specifications for equipment procurement by the FPS.

The Federal Protective Service (FPS) has issued uniform specifications for a Left-Hand (LH) Holster with a Flashlight Holder, identified as FPS-061. This specification details a mid-ride, top-draw, straight-drop cant holster made of black, nylon-look molded plastic. Key product characteristics include a Self Locking System (SLS), suitability for left-handed individuals, and compatibility with both pistols and revolvers, specifically the Glock 22 pistol. The document indicates no customization options and that the item is available in one size. This specification is likely part of a federal government Request for Proposal (RFP) for procurement of law enforcement equipment.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-062, outlines the requirements for an RH Leather Magazine & Handcuff Combo Case. This specification details that the item must be made of black leather with suede lining, designed for a GLOCK 22/27, and configured for a right-hand user. It must accommodate both standard and hinged handcuffs and feature compact carry with belt loops that fit up to a 1 ¾” belt. The document specifies that no customization is available, and the product comes in one stock size. This file is likely part of an RFP for procurement of uniform equipment for federal protective service officers.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued specifications for a Left Hand Leather Magazine & Handcuff Combo Case, designated FPS-063. This accessory is to be made of black leather and designed to fit GLOCK 22/27 magazines, as well as standard and hinged handcuffs. It features compact carry with belt loops, accommodating belts up to 1 ¾” wide. The item is available in one size, with no customization options. This document outlines the required characteristics for this specific piece of uniform equipment, likely for procurement through an RFP process.

The Federal Protective Service (FPS) has issued uniform specifications for a Leather Plain Clothes Holster, identified as FPS-064. This document details the material, color, and product characteristics required for the holster, which is intended for GLOCK 22 pistols. Key specifications include black leather construction, a right-hand draw, and an open-top design secured with a single snap. The holster is a one-size item with no customization options. This specification is likely part of a federal government Request for Proposal (RFP) or procurement process, outlining the exact requirements for vendors to supply the specified equipment to the FPS.

The Federal Protective Service (FPS) has issued uniform specifications for a Leather Plain Clothes Holster, identified as FPS-065. This specification details the required material as black leather and specifies that the holster must be designed for a GLOCK 22 pistol. It must be a left-hand, open-top design with a single snap on top for weapon securement. The specification indicates no customization options and that it will be available in one stock size. This document is likely part of a Request for Proposal (RFP) for vendors to supply the specified holsters to the FPS.

The Federal Protective Service (FPS) has issued uniform specifications for a Leather Plain Clothes Holster, identified as FPS-066. This specification details the requirements for a black leather holster designed for GLOCK 27 pistols. The holster must be right-handed and feature an open-top design with a single snap for securing the weapon. No customization is specified, and the holster is to be provided in one universal size.

The Federal Protective Service (FPS) has issued uniform specifications for an LH Leather Plain Clothes Holster, identified as FPS-067. This specification details the requirements for a black leather holster designed for GLOCK 27 pistols, specifically for left-hand users. The holster features an open-top design with a single snap for weapon retention. There are no customization options, and it is available in one stock size. These specifications are likely part of a federal government Request for Proposal (RFP) for the procurement of uniform accessories for the Federal Protective Service.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued uniform specifications for a Police Raid Windbreaker Jacket (FPS-068). This jacket must be 100% polyester, black, and feature a water-resistant finish, vented back yoke, adjustable cuffs, and an adjustable shock cord. Customization requirements include specific DHS Police badging and lettering in white on both the front and back of the jacket, with precise dimensions for each element. The jacket will be available in sizes from XS to 4XL. These specifications are crucial for vendors responding to RFPs to ensure compliance with FPS uniform standards.

The Federal Protective Service (FPS) has issued uniform specifications for a Special Agent Raid Windbreaker Jacket (FPS-069). This jacket is to be made of 100% black polyester with a water-resistant finish and features such as a vented back yoke, adjustable cuffs, and an adjustable shock cord. Customization is mandatory, requiring a white screened DHS Special Agent badge on the left front chest. The right front must display "POLICE" (1.5" high, 4.75" long) with "DHS" (1.5" high, 2.75" long) underneath, all in white. The center middle back must feature "POLICE" (3" high, 9.5" long) with "HOMELAND SECURITY" (1.5" high, 10.5" long) underneath, also in white. The jacket will be available in stock sizes from XS to 4XL.

The Federal Protective Service (FPS) has issued a uniform specification, FPS-078, for a Navy Flex-Fit Police Ball Cap. This specification details the material composition, color, and style of the cap. The material is a blend of 74% Polyester, 25% Wool, and 1% Lycra, in Navy Blue. The cap is described as a low-profile, six-panel design. A key customization requirement is a blue and gold hat badge embroidery of a “Police Badge Logo” centered on the front in gold thread. The stock sizes available for this cap range from RG/SM to RG/LXL. This document likely serves as a standard for procuring uniforms for FPS personnel.

The Federal Protective Service (FPS) has issued uniform specifications for a Male Navy Short Sleeve TDU Tactical Shirt for Special Agents, designated FPS-079. The shirt is made from a 65/35 poly-cotton micro rip-stop fabric, weighing 6.4 oz, and is midnight navy in color. Key features include mechanical stretch fabric, a lightweight and durable rip-stop blend, and a Teflon shield for stain repellency. It also has two front BDU patch pockets with hidden document storage, a zippered front with a covered placket, a concealed button-down collar, mic access, a back venting system, stitched-down low-profile epaulets, and a cloth badge holder. Customization requires the official FPS emblem on both sleeves, the Special Agent badge on the left upper front chest, and an embroidered name tape on the right upper front chest; rank insignia attachment is optional. The shirt is available in stock sizes from XS to 4XL. These specifications are crucial for vendors responding to federal government RFPs for agent uniforms, ensuring standardization and compliance with official requirements.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-080, details the requirements for Male Navy TDU Tactical Trousers. These trousers are made from a 65/35 poly-cotton micro rip-stop fabric, weighing 6.4 oz., and are midnight navy in color. Key characteristics include a durable two-way mechanical stretch fabric, an eight-pocket design, seven belt loops, a flex waist, a gusseted crotch, gusseted cargo side pockets with internal compartments, nylon-reinforced pockets with hook and loop flaps, side magazine pockets, and reinforced knees designed to accommodate knee pads. The fabric also features a Teflon Shield and stain repellent finish. The trousers are available in waist sizes 28-54, with no customization options specified. This document is likely part of a federal government Request for Proposal (RFP) for uniform procurement.

The document outlines the specifications for female navy TDU tactical trousers, model FPS-081, for the Federal Protective Service. These trousers are made from a 65/35 poly-cotton micro rip-stop fabric, weighing 6.4 oz., and are midnight navy in color. Key characteristics include a durable micro rip-stop cotton blend, 2-way mechanical stretch, an 8-pocket design, 7 belt loops, a flex waist, a gusseted crotch, gusseted cargo side pockets with internal compartments, nylon-reinforced pockets with hook and loop flaps, side magazine pockets, reinforced knees that accommodate knee pads, and a Teflon Shield and stain repellent finish. The trousers are available in stock sizes from 2 to 20. This document, likely part of a federal government RFP, details the required uniform components for the Federal Protective Service.

The Federal Protective Service (FPS) has outlined detailed specifications for a Male Navy Short Sleeve TDU Tactical Shirt for its police personnel. The shirt, designated FPS-082, is made from a 65/35 poly-cotton micro rip-stop fabric (6.4 oz) in Midnight Navy. Key features include mechanical stretch for mobility, a lightweight and durable rip-stop blend, Teflon stain repellent, two BDU patch pockets with hidden document storage, a zippered front with a covered placket, a concealed button-down collar, mic access, a back venting system, stitched-down low-profile epaulets, and a cloth badge holder. Customization requires the official FPS emblem on both sleeves, the FPS Police badge on the left upper front chest, and an embroidered name tape on the right upper front chest. Rank insignia attachment is optional. The shirt is available in stock sizes from XS to 4XL. These specifications are crucial for ensuring uniformity and compliance for FPS officers.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued uniform specifications for a double handcuff case, identified as FPS-083. This specification details the required materials, color, and product characteristics for the item. The handcuff case must be made of black nylon with a high-quality, high-density foam center. Key features include a molded design to keep the duty gear open for easy one-hand use, resistance to fading and scratching, and weatherproof and hand-washable properties. The dimensions of the case are 5 1/3” x 4 ½”. There are no customization options, and the item is available in one stock size. These specifications are crucial for vendors responding to government RFPs for law enforcement equipment.

The Federal Protective Service (FPS) has issued a uniform specification, FPS-084, for a Flex-Fit Special Agent Ball Cap. This specification details the required materials, color, product characteristics, customization, and stock sizes for the cap. The material is a blend of 74% polyester, 25% wool, and 1% Lycra Flex-fit, in navy color. The cap features a low profile and six panels. Customization includes a centered blue and gold embroidered “Special Agent Badge Logo” on the front, using gold thread. Stock sizes range from RG/SM to RG/LXL. This document likely serves as a guideline for procurement or manufacturing in the context of government RFPs.

The Federal Protective Service (FPS) has outlined uniform specifications for a black/yellow bike polo shirt, model FPS-085. The shirt is made from a lightweight, athletic-fitting fabric blend of 98% polyester and 2% silver nylon, featuring anti-microbial, moisture-wicking, and quick-drying properties. Key characteristics include mic tabs and reflective tape. Customization details specify the placement of the Office of Federal Protective Services emblem on both sleeves, a badge emblem on the left upper front, and a "Police" heat seal on the center middle back. The polo will be available in stock sizes ranging from SS/S to SS/3XL. This document likely serves as a component of an RFP or procurement process for new FPS uniforms.

The Federal Protective Service (FPS) has outlined detailed uniform specifications for a black and yellow bike polo shirt (FPS-086). The shirt is made from a lightweight, athletic-fitting fabric blend of 98% Polyester and 2% Silver Nylon, featuring anti-microbial, moisture-wicking, and quick-drying properties. Key characteristics include mic tabs and reflective tape for functionality and safety. Customization requirements specify the placement of the Office of Federal Protective Services emblem on both sleeves, a badge emblem on the left upper front, and a "Police" heat seal on the center middle back. The polo will be available in stock sizes ranging from RG/S to RG/5XL. This document serves as a standard specification, likely for procurement or uniform manufacturing, ensuring consistency and adherence to FPS requirements.

The Federal Protective Service (FPS) has issued uniform specifications for a black and yellow bike jacket, designated FPS-087. This document, likely part of an RFP, details material composition (100% nylon outer, 100% polyester lining), color, and product characteristics such as pit zips, capped back for ventilation, a 2-way zip with storm flaps, a zip-out liner, and reflective tape. Customization requirements include a sewn-on official Police badge emblem on the left upper front, DHS emblems on each shoulder, and “POLICE” heat-sealed in black on the center middle back. The jacket will be available in stock sizes ranging from RG/XS to RG/4XL. These specifications ensure uniformity and functionality for FPS personnel.

This document, FPS-089, outlines the specifications for the Male Navy SS Shirt for the Federal Protective Service (FPS). The shirt is made of 74% polyester, 25% wool, and 1% lycra in navy color. Key characteristics include a convertible collar, a center front placket, a badge tab with sling and eyelets, silicon permanent creases, and FPS emblems on both sleeves. The customization specifically notes the FPS emblems on both sleeves. Stock sizes range from SS/145 to SS/205. This document appears to be part of a larger federal government procurement or RFP for uniforms.

The Federal Protective Service (FPS) has issued uniform specifications for the "U Navy Mesh Ballcap – Police" (FPS-090). This document outlines the required material, color, characteristics, and customization for the ballcap. The cap must be 100% polyester mesh, dark navy, structured, mid-profile, and feature an adjustable hook & loop closure. A crucial customization requirement is the attachment of the official Federal Protective Service Police Emblem to the center front. The ballcap is available in one stock size, "One Size." This specification is likely part of a federal government Request for Proposal (RFP) or a similar procurement document, detailing the exact requirements for vendors supplying uniforms to the FPS, ensuring standardization and adherence to agency branding for police personnel.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for the Female Navy SS Shirt (FPS-092). The shirt is to be made of 74% polyester, 25% wool, and 1% lycra, in navy blue. Key characteristics include a convertible collar, center front placket, badge tab with sling and eyelets, and silicon permanent creases. Customization requires FPS emblems on both sleeves, and the shirt will be available in stock sizes from RG/S to RG/XXL. This document outlines material, color, product features, and sizing to ensure uniformity and compliance within the FPS.

The Federal Protective Service (FPS) has issued Uniform Specification FPS-093 for small oak leaf collar insignia. This specification outlines the material and design requirements for these insignia, which are to be made of metal with a high-shine silver finish. Key product characteristics include an oak leaf design, a clutch back for attachment, and packaging of two insignias per pack. The specification notes that there are no customization options and that the insignias are available in one stock size. This document is likely part of an RFP or procurement process for the supply of these uniform components to the FPS.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued Uniform Specifications FPS-096 for Unisex Bike Black Crew Socks. These socks are made from a blend of 65% Polypro, 15% Spandex, 12% Nylon, and 8% Sta-Cool poly, and are black in color. Key product characteristics include a crew style with white "POLICE" lettering along the cuff. Customization is not available, and the socks are offered in stock sizes RG/M to RG/L. This document outlines the specific requirements for this uniform item, likely for procurement through an RFP process.

The Federal Protective Service (FPS) Uniform Specification FPS-098 outlines the requirements for unisex black winter gloves. These gloves feature a goatskin palm and 100% nylon back, with a black color. Key product characteristics include wrist length, hook and loop and elastic wrist closures, a spandex wrist cuff, and non-skid material for enhanced weapon control. Customization is not applicable, and the gloves are available in stock sizes from S to XXL. The document was last updated on May 20, 2013, to include updated equivalent brand/style information. This specification is likely part of a broader government procurement or RFP for uniform components.

The Federal Protective Service (FPS) has issued uniform specifications for two jackets: the FPS-101 Red Firearms 3-N-1 Jacket, Police, and the FPS-149 Red Firearms Jacket, Police. Both jackets are red, water-resistant, and reflective. The FPS-101 model features a shell of 100% Poly/twill, a 100% polyester shell lining, and a 100% polyester fleece liner. It includes an inside roll-away hood, adjustable cuffs, and lower concealed pockets. Both jackets require customization with a badge on the left upper front (Police) and the FPS Agency patch on both sleeves. Stock sizes range from RG/S to RG/4XL. These specifications are crucial for procurement within federal government RFPs, ensuring standardization and compliance for FPS personnel attire.

The Federal Protective Service (FPS) Uniform Specification FPS-102 and FPS-150 outlines the requirements for a Red Firearms 3-N-1 Jacket and a Red Firearms Jacket, Special Agent. The jackets are made from 100% Poly/twill shell, 100% Polyester shell lining, and 100% Polyester Fleece liner, all in red. Key characteristics include an inside roll-away hood, adjustable cuffs, reflective properties, water resistance, and lower concealed pockets. Customization requires a "Special Agent" badge on the left upper front and FPS Agency patches on both sleeves. The jackets are available in stock sizes from RG/S to RG/4XL. This document provides a detailed product description for uniform procurement within federal government RFPs.

The Federal Protective Service (FPS) has issued uniform specifications for tactical boots and triple magazine pouches, likely for an RFP. The FPS-103 specification outlines a black 8-inch tactical boot made of leather and Cordura nylon, featuring water-resistant leather, wicking lining, stretch Lycra tongues, a cushioned footbed, PU midsoles, drainage vents, and microbe shield. It is available in stock sizes from 06M to 15M and 07W to 15W, in half-size increments. The FPS-146 specification briefly mentions a triple magazine pouch without further details in the provided text. These specifications indicate the requirements for procurement of these uniform items by the Federal Protective Service.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for a Nylon Triple Mag Pouch, identified as FPS-104. This specification is likely part of a government Request for Proposal (RFP) for procurement. The pouch must be made of 100% nylon, be black in color, and designed to fit most metal or polymer triple stack 9mm/.40 caliber magazines. It is a one-size-fits-all product with no customization options. This document outlines the precise material and characteristic standards for this specific piece of equipment for FPS personnel.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for a black base layer, model FPS-105. This item is specified as 100% cotton, black in color, and sold in a 3-pack. Key product characteristics include a crew neck, extended length, double stitching, and moisture-wicking properties. Customization allows for DHS or component-specific branding. The available stock sizes range from RG/S to RG/3XL. This document likely serves as a reference for procurement or manufacturing within the context of federal government RFPs for uniform components.

The Federal Protective Service (FPS) has issued uniform specifications for an SS Navy Base Layer, identified as FPS-106. This document outlines the required characteristics for a uniform component, likely intended for procurement through a federal government Request for Proposal (RFP). The base layer must be 100% cotton, navy in color, and sold in three-packs. Key product features include a crew neck, extended length, double stitching, and moisture-wicking properties. Customization options allow for DHS or component-specific branding. The base layer will be available in stock sizes ranging from RG/S to RG/3XL. These specifications ensure standardized and functional attire for FPS personnel.

The document outlines uniform specifications for the Federal Protective Service (FPS) LS Black Base Layer, identified as FPS-111. This specification is likely part of a federal government Request for Proposal (RFP) for procurement of uniforms. The base layer must be 100% black cotton with a generous fit, extra-long tails, and seamless construction for the neck, cuffs, and body. Key product characteristics include reinforced shoulder seams and FPS neck embroidery for customization. Available stock sizes range from RG/S to RG/3XL. These detailed specifications ensure standardization and quality for FPS uniform components.

The Federal Protective Service (FPS) has issued uniform specifications for a Black Base Layer Pant, identified as FPS-112. This document outlines the material composition, color, and key product characteristics required for the garment. The pants must be made from a heavy-weight fabric consisting of 86% Polyester and 14% Spandex, offering 4-way stretch, anti-microbial properties, moisture-wicking, and quick-drying capabilities, all designed for an athletic fit. There are no customization options, and the available stock sizes range from RG/S to RG/XXL. These specifications are part of the FPS's procurement process, ensuring standardized and functional attire for its personnel.

The FEDERAL PROTECTIVE SERVICE (FPS) Uniform Specification FPS-114 details the requirements for Navy SRT Nametapes. These nametapes must be made from 65/35 poly cotton twill in navy blue, with the last name embroidered in gold capital letters. Key product characteristics include a hook backing, machine washable, fade-resistant, wrinkle-resistant, and non-fraying material. The nametapes are a standard size of 5 3/8” long by 1” high. This document outlines the specific material, color, customization, and durability standards for the nametapes, ensuring uniformity and quality for FPS personnel.

The FEDERAL PROTECTIVE SERVICE (FPS) has issued uniform specifications for a Unisex Black Nylon Duty Belt (FPS-115). This specification details the material, color, and product characteristics of the duty belt. Key features include 100% ballistic nylon material in black, a 2-1/4" width, a hook and loop lining for adherence to an under-belt, a multi-release buckle for security, and fade- and scratch-resistant properties. The belt is also weatherproof and hand washable, with no customization options and available in one size. These specifications are crucial for vendors bidding on federal government RFPs related to uniform procurement for the FPS.

The Federal Emergency Management Agency (FEMA) has issued a Uniform Specification (FPS-117) for a Unisex Black Backpack for Field Operations. This specification details the required characteristics for the backpack, emphasizing its durability and functional design. Key features include construction from super durable 1000D nylon fabric, huge YKK zippers, a double-layer pack top to eliminate stress, dual compression straps, and a removable waist belt. The specification also states that the backpack should be

The FEDERAL PROTECTIVE SERVICE (FPS) Uniform Specification FPS-118 outlines the requirements for the silver jacket insignia (eagle). This specification details that the insignia must be made of durable, scratch-resistant metal with a high-shine silver finish. Key product characteristics include its ability to attach to thicker fabrics like the Ike jacket using a double clutch back. Each pack contains one pair of mirrored eagles, and the insignia is a one-size-fits-all item with no customization options. This document serves as a standard for the procurement or manufacturing of these specific uniform components for the FPS.

The Federal Protective Service (FPS) has outlined uniform specifications for a long-sleeve, navy, heavy-weight base layer, identified as FPS-119. This garment is composed of an 86% polyester and 14% spandex blend, ensuring a four-way stretch fabric with anti-microbial and moisture-wicking properties. Key features include extra length and custom FPS neck embroidery. The base layer will be available in stock sizes ranging from RG/S to RG/XXL. These specifications are crucial for vendors responding to federal government RFPs for uniform procurement, ensuring that all supplied garments meet the precise material, color, product characteristics, and customization requirements set forth by the FPS.

The document outlines the specifications for insignia cloth, specifically a silver eagle, for the Federal Protective Service (FPS). Designated as FPS-120, these insignias are made from a 65/35 poly-cotton blend in navy blue with silver thread. Each package contains two mirrored 1” x 1” eagles with hook and loop backing, available in one stock size. These specifications are crucial for procurement within government RFPs, ensuring uniformity and adherence to material and design standards for FPS uniforms.

This document outlines the specifications for uniform insignia, specifically a silver oak leaf, for the Federal Protective Service (FPS). The insignia, designated FPS-121, is made from a 65/35 poly-cotton blend in navy blue with silver thread. Key characteristics include its 1” x 1” size, packaging of two per unit, and a hook and loop backing for attachment. It is available in one stock size. This document appears to be part of a federal government procurement request or a similar official guideline for uniform components.

The document outlines the uniform specifications for an Insignia, Cloth: Gold One Star, designated as FPS-122, for the Federal Protective Service. Key specifications include a material composition of 65/35 poly cotton, a navy blue color with gold thread, and product characteristics such as being sold in packages of two, with each insignia measuring 1” x 1”. The insignia features hook and loop backing for customization and is available in one stock size. This document serves as a detailed guideline for procurement, likely part of an RFP, to ensure standardization and compliance for FPS uniform components.

The Federal Protective Service (FPS) has issued uniform specifications for cloth insignia, specifically a gold two-star design. These insignias, designated as FPS-123, are made from a 65/35 poly-cotton blend in navy blue with gold thread. Each package contains two 1" x 1" insignias with two stars pointing point-to-point. They feature a hook and loop backing for attachment, with an optional collar insignia. The insignias are available in one size. These specifications are crucial for maintaining uniform standards within the FPS, ensuring consistency and adherence to federal guidelines for official attire.

The document outlines the specifications for Federal Protective Service (FPS) uniform insignias. These insignias are cloth, gold three-star, and designated as FPS-124. They are made from a 65/35 poly-cotton blend in navy blue with gold thread. Each package contains two 1" x 1" insignias, featuring three stars point-to-point. Customization options include hook and loop backing and optional collar insignia. The insignias are available in one size. This document serves as a standard specification for procurement or manufacturing within federal government uniform requirements.

This document, FPS-125, outlines the specifications for a 6-Inch Black Side Zip Boot required by the Federal Protective Services. Key requirements include a full-grain leather and denier nylon upper, black color, and a side-zip style with a 6-inch rise. Performance features demand a side zipper with Velcro closure, foam-padded collar and tongue, a gusseted tongue, moisture-wicking lining with AEGIS antimicrobial protection, a removable custom-fit EVA insole, a classic slip and oil-resistant non-marking rubber outsole, a flexible sole, and a steel shank. The boots must be available in male sizes, including half-size increments, with stock sizes ranging from unisex 4 to 16, encompassing regular and wide widths in specific size ranges. This specification is crucial for vendors responding to government RFPs for uniform procurement.

The Federal Protective Service (FPS) has issued uniform specifications (FPS-126) for a Female Navy Short Sleeve TDU Tactical Shirt for Special Agents. The shirt is made of 65/35 poly-cotton micro rip-stop fabric in Midnight Navy. Key characteristics include mechanical stretch, lightweight durability, Teflon stain repellent finish, two front BDU patch pockets with hidden document storage, a zippered front with covered placket, a concealed button-down collar, mic access, a back venting system, stitched-down low-profile epaulets, and a cloth badge holder. Customization requires the official FPS emblem on both sleeves, the Special Agent badge on the left chest, and an embroidered name tape on the right upper front. Rank insignia attachment is optional. The shirt is available in stock sizes from XS to 2XL.

The Federal Protective Service (FPS) has issued uniform specifications for a Male Navy Long Sleeve TDU Tactical Shirt—Police, designated FPS-127. This document details the material, color, and product characteristics, including a 65/35 poly-cotton micro rip-stop fabric, midnight navy color, and features like mechanical stretch, Teflon shield, and specialized pockets. Customization requirements include the attachment of the official FPS emblem on sleeves, the FPS Police badge on the left chest, and an embroidered name tape on the right chest, with optional rank insignia. The shirts are available in sizes XS to 4XL, ensuring a standardized and professional appearance for FPS personnel.

This document, FPS-128, outlines the detailed specifications for the Federal Protective Service Male Navy Long Sleeve TDU Tactical Shirt for Special Agents. The shirt is made from 65/35 poly-cotton micro rip-stop fabric, weighing 6.4 oz, and comes in Midnight Navy. Key characteristics include mechanical stretch, lightweight and durable fabric, Teflon stain repellent finish, two front BDU patch pockets with hidden document storage, a zippered front with covered placket, a concealed button-down collar, mic access, a back venting system, stitched-down low-profile epaulets, and a cloth badge holder. Customization requires the official Federal Protective Services emblem on both sleeves, the Special Agent badge on the left upper front chest, and an embroidered name tape on the right upper front chest. Rank insignia attachment is optional. The shirt is available in sizes XS to 4XL.

The Federal Protective Service (FPS) has issued uniform specifications for a Female Navy Long Sleeve TDU Tactical Shirt, model FPS-129. This specification details the material as 65/35 poly-cotton micro rip-stop fabric weighing 6.4 oz, in Midnight Navy color. Key product characteristics include mechanical stretch for mobility, a lightweight yet durable rip-stop cotton blend, and a Teflon shield for stain resistance. The shirt features two front BDU patch pockets with hidden document storage, a zippered front with a covered placket, a concealed button-down collar, mic access at the side seam, a back venting system, stitched-down low-profile epaulets, and a cloth badge holder. Customization requires the official FPS emblem on both sleeves, the FPS Police badge on the left upper front chest, and an embroidered name tape on the right upper front chest; rank insignia attachment is optional. The shirt is available in stock sizes XS to 2XL.

The Federal Protective Service (FPS) document outlines detailed uniform specifications for the Female Navy Long Sleeve TDU Tactical Shirt for Special Agents (FPS-130). The shirt is made from a 65/35 poly-cotton micro rip-stop fabric, weighing 6.4 oz, and comes in Midnight Navy. Key features include mechanical stretch for mobility, a Teflon shield for stain resistance, two BDU patch pockets with hidden document storage, a zippered front with a covered placket, a concealed button-down collar, mic access, a back venting system, and low-profile epaulets. Customization includes the official FPS emblem on both sleeves, the Special Agent badge on the left upper chest, and an embroidered name tape on the right upper chest. Rank insignia attachment is optional. The shirt is available in stock sizes from XS to 2XL. This document serves as a standard for procurement within government RFPs for agent uniforms.

This document, FPS-131, outlines the specifications for the Federal Protective Service's Female Navy Short Sleeve TDU Tactical Shirt—Police. It details the required material as a 65/35 poly-cotton micro rip-stop fabric in Midnight Navy, emphasizing durability and range of motion through mechanical stretch and a Teflon stain-repellent finish. Key product characteristics include two front BDU patch pockets, a zippered front with a covered placket, a concealed button-down collar, mic access, and a back venting system. Customization requirements specify the attachment of the official Federal Protective Services emblem on both sleeves, the Police badge on the left upper chest, and an embroidered name tape on the right upper chest, with optional rank insignia. The shirt is available in stock sizes from XS to 2XL.

The Federal Protective Service (FPS) has issued uniform specifications for a Male Navy Long Sleeve TDU Tactical Shirt with Shoulder Emblems (FPS-132). This document details the material, color, and product characteristics of the shirt, which include a 65/35 poly-cotton micro rip-stop fabric in midnight navy, mechanical stretch, Teflon stain repellent, and various functional features like BDU patch pockets, a zippered front, and a back venting system. Customization requirements specify the attachment of the official Federal Protective Services emblem on both sleeves and a badge tab. The shirt will be available in stock sizes from XS to 4XL, ensuring a standardized and professional appearance for FPS personnel.

The Federal Protective Service (FPS) has issued uniform specifications for a female Navy long-sleeve TDU tactical shirt. This document, FPS-133, details the required material (65/35 poly-cotton micro rip-stop fabric, 6.4 oz), color (Midnight Navy), and product characteristics. Key features include mechanical stretch fabric, lightweight and durable rip-stop cotton blend, Teflon shield for stain repellency, two front BDU patch pockets with hidden document storage, a zippered front with covered placket, concealed button-down collar, mic access, back venting system, stitched-down low-profile epaulets, and a cloth badge holder over the left pocket. Customization requires official Federal Protective Services emblems on both sleeves and an attached badge tab. The shirt will be available in stock sizes from XS to 2XL. This specification is likely part of an RFP for uniform procurement.

This document, FPS-134, outlines the detailed uniform specifications for the Federal Protective Service's Male Navy Short Sleeve TDU Tactical Shirt with Shoulder Emblems. The shirt is made from a 65/35 poly-cotton micro rip-stop fabric in midnight navy, featuring mechanical stretch, a Teflon shield for stain resistance, and a lightweight yet durable design. Key characteristics include two front BDU patch pockets with hidden document storage, a zippered front with a covered placket, a concealed button-down collar, mic access, a back venting system, stitched-down low-profile epaulets, and a cloth badge holder. Customization requires official Federal Protective Services emblems on both sleeves and an attached badge tab. The shirt is available in stock sizes from XS to 4XL. This specification is crucial for procurement processes within federal government RFPs, ensuring all supplied uniforms meet the exact requirements for FPS personnel.

The Federal Protective Service (FPS) has issued uniform specifications for a female Navy Short Sleeve TDU Tactical Shirt with Shoulder Emblems (FPS-135). This document details the required material, color, and product characteristics for the uniform shirt. Key features include a 65/35 poly-cotton micro rip-stop fabric in midnight navy, mechanical stretch, Teflon stain repellent finish, two front BDU patch pockets, a zippered front, concealed button-down collar, mic access, back venting, stitched-down epaulets, and a cloth badge holder. Customization requires official Federal Protective Services emblems on both sleeves and an attached badge tab. The shirt will be available in stock sizes from XS to 2XL. This specification ensures uniformity and functionality for FPS personnel, aligning with federal procurement standards for tactical gear.

This document outlines the specifications for a unisex cloth 3-star insignia with a Hook & Loop backing, designated as FPS-136, for the Federal Protective Service. The emblem is made from a blend of 65% polyester and 35% cotton, featuring dark navy fabric with gold thread. It is designed to be one-size-fits-all and comes in packages of two. An optional collar insignia customization is available.

The Federal Protective Service (FPS) has issued uniform specifications for a "U Navy Mesh Ballcap – Special Agent," detailed in document FPS-137. This specification outlines the required material as 100% polyester mesh in dark navy color. Key product characteristics include a structured, mid-profile design with an adjustable hook and loop closure. The cap will feature an official Federal Protective Service Special Agent Emblem attached to the center front. The standard sizing for this item is "One Size." This document serves as a guideline for procurement or manufacturing to ensure uniformity and adherence to FPS standards for Special Agent attire.

The Federal Protective Service (FPS) has outlined uniform specifications for Warm Weather Dress Socks (FPS-139). These socks must be made from 88% Polyester/12% TENCEL® (or equivalent) in black. Key product characteristics include dry feet, no blisters, odor control, NTOA Approval, Ultimax® (or equivalent) technology, and being Made in the USA. Customization options allow for DHS or component-specific branding. The socks are available in three stock sizes: RG MD, RG LG, and RG XL.

The Federal Protective Service (FPS) document, FPS-140, outlines the uniform specifications for a "Mesh Ball Cap - Police." This specification is likely part of a federal government RFP for uniform procurement. The cap's material consists of 100% cotton twill for the front panels and bill, with 100% polyester for the mid and back panels. It is required to be navy in color. Key characteristics include a 5-panel structured high-profile design with mesh mid and back panels for ventilation, and a 7-position adjustable snapback closure. A crucial customization requirement is the attachment of the DHS emblem to the front panel. The caps are specified as "One Size." This document provides precise details for vendors to ensure compliance and consistency in the uniform supply for the Federal Protective Service.

The document outlines the specifications for the Federal Protective Service (FPS) Uniforms, specifically the Navy Police Homeland Security Unit Panel (FPS-141). This uniform component is navy in color, features a Hook and Loop (Velcro) panel, and displays “Police Homeland Security” in yellow lettering. The panel is one size and does not allow for customization. This information is crucial for procurement processes, likely as part of an RFP for uniform supplies for the Federal Protective Service, ensuring all acquired panels meet the specified design and functional requirements for their law enforcement personnel.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-142, details the requirements for a Navy Police DHS Front Panel. This specification is likely part of a federal government RFP for uniform components. The panel is navy in color, features a hook and loop (Velcro) backing, and displays "Police DHS" in yellow lettering. Customization options include embroidering the wearer's last name or badge number in yellow lettering. The item is available in one size. This document outlines precise visual and functional standards for a uniform accessory, ensuring consistency and adherence to FPS branding and identification protocols.

The document outlines the specifications for a Navy Police Homeland Security K9 Unit panel (FPS-143) to be used by the Federal Protective Service. Key characteristics include a navy color, a hook and loop (Velcro) panel, and yellow lettering that reads “Police Homeland Security K9 Unit.” The panel is available in one stock size, with no customization options. These specifications are likely part of a uniform or equipment procurement request, detailing the required attributes for K9 unit identification within the Federal Protective Service.

This document outlines the specifications for the Federal Protective Service (FPS) Police Badge, designated as FPS-144. It details that the badge is gold in color and features a hook and loop (Velcro) attachment for secure fastening. The specifications indicate that customization is not applicable for this item, and it is available in one stock size. This file serves as a clear guideline for procurement or manufacturing processes related to this specific uniform component within federal government RFPs.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-145, details the requirements for a unisex navy polo shirt with the DHS seal. The polo must be made of 100% polyester fabric, feature a button placket with a mic tab/sunglasses loop, be 100% antimicrobial, and include a dual pen/pencil pocket on the left sleeve. Key characteristics include durable mesh fabric for breathability, a no-roll collar, polyester-pique knit, side gussets, and raglan sleeves for comfort and mobility, and superior moisture-wicking properties. Customization requires attaching the DHS emblem to the left upper front. The polo is available in sizes from XS to 6XL. This document likely serves as a specification within an RFP for uniform procurement.

The Federal Protective Service (FPS) has outlined the specifications for its FPS-146 Duty Belt, a key component in uniform requirements. This document details the essential characteristics of the duty belt, which is constructed from 100% black nylon fabric. Key features include its unisex design, robust durability, non-magnetic properties, and significant load-bearing capacity, all while ensuring wearer comfort. The belt is 1.75 inches wide and is available in three stock sizes: RG RG, RG LGE, and RG XLG, with no customization options. This specification is crucial for federal government RFPs, ensuring all procured duty belts meet the strict standards required for federal protective services.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for an uninsulated coverall, model FPS-147, likely for procurement purposes within a government RFP. The coverall must be made of 65% polyester and 35% cotton fabric in navy color, featuring pre-cure durable press with soil release. Key characteristics include a two-way brass zipper, multiple pockets (front, hip, breast, rule), an action back, and side vent openings. It is designed to be worn over clothes and manufactured by Red Kap Industries. Customization requires attaching a DHS Emblem to the left upper front. The coverall is available in 31 stock sizes, including LN (40-62), RG (32-66), and SH (size 50). This document serves as a detailed specification for vendors bidding on contracts to supply uniforms to the FPS.

The document outlines the specifications for nametapes used by the Federal Protective Service (FPS). Specifically, it details the requirements for a 1” x 6” fused cut nametape, identified as FPS-148. The material specified is 65/35 poly cotton ripstop in a dark navy color. Key product characteristics include its function as a nametape and the requirement that it be

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for the U Coyote Boot 8in (FPS-149). These boots must be 100% leather in coyote brown, featuring flash- and water-resistant leather, 1,000 Denier CORDURA®, a Rocky® Air-Port® cushion footbed, Lycra Tongue, proprietary high-walled Vibram soles, triple-stitched construction, and a fiberglass shank. Key characteristics include advanced S2V Sieve™ technology for air circulation and water drainage, Roll-Stop Ankle Stability™ to reduce injuries, and an 8-inch height. The boots are approved for wear with all applicable OCP variations, are uniform compliant (DA Pam 670-1 Date 1 JUL 15), Made in the USA, Berry Compliant, and coated for flame resistance. They are available in men's sizes 4-15 and women's sizes 5-14.

The Federal Protective Service (FPS) has issued uniform specifications for unisex black suspenders, detailed as FPS-150. These suspenders are made of 100% nylon, black in color, and feature a 4-point built-in keeper attachment system for optimal weight distribution. They are designed with 2 1/4" keepers to attach directly over duty and pants belts, offering an easy on-and-off design. Key characteristics include a mic attachment loop on the left chest strap, ultra-strong 1 1/2" nylon webbing for a professional appearance, and high-quality poly adjustable slides to prevent uniform wear. The product is proudly Made in the USA and is available in one stock size. This document outlines the specific requirements for federal government RFPs related to uniform procurement for the Federal Protective Service.

The document outlines the specifications for a black leather plain clothes holster, model FPS-151, for the Federal Protective Service. Key requirements include 100% black leather construction, right-hand orientation, traditional style, and compatibility with Glock 17/22 firearms. The holster is designed to be unisex and worn with a belt, available in one size with no customization options. This document serves as a standard specification, likely for procurement or uniform guidelines within a federal government context.

This document outlines the specifications for a black leather plain clothes holster designed for the Glock 22, intended for use by the Federal Protective Service (FPS). The holster, identified as model FPS-152, is made of 100% black leather and is specifically designed for left-hand orientation. It features a traditional style, fits Glock 22 guns, and is a unisex holster designed to be worn with a belt. The specifications indicate that there are no customization options and it is available in one size. This document is likely part of a federal government Request for Proposal (RFP) for uniform components.

The Federal Protective Service (FPS) has issued uniform specifications for a black leather plain clothes holster designed for the Glock 27, right-hand orientation. This document, FPS-153, details the required material as 100% black leather. Key characteristics include a traditional style, compatibility with Glock 27 guns, and a unisex design meant to be worn with a belt. The specifications indicate no customization options and that the holster is available in one stock size. This document outlines the precise requirements for a specific piece of equipment, ensuring standardization for FPS personnel.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-154, details the requirements for a black leather plain clothes holster designed for the Glock 27. This specification outlines the material as 100% black leather, with a left-hand orientation and a traditional style. It is a unisex holster intended to be worn with a belt and is available in one size. The document indicates no customization options. This specification is likely part of an RFP for procurement of uniform accessories for the FPS, ensuring standardization and compatibility with their issued firearms.

The Federal Protective Service (FPS) has released uniform specifications for a Unisex Grey SS Special Agent Polo, model FPS-155. This polo is made of 100% polyester, grey in color, and designed for comfort, mobility, and a professional appearance. Key features include a relaxed fit, no-roll collar, a 3-button placket with a loop for a mic or glasses, and two pencil pockets on the left sleeve. The material offers superior moisture transport, permanent coldblack® Technology for cooling and UV reflection (UPF 30+), fade-resistance, and anti-microbial treatment for odor control. Customization includes a DHS emblem on the left upper front. The polo is available in sizes S to 3XL.

The Federal Protective Service (FPS) has outlined the uniform specifications for a Unisex Grey SS Police Polo, identified as FPS-156. This document details the material, color, product characteristics, customization, and available stock sizes for the polo shirt. The shirt is made of 100% polyester in grey and features a relaxed fit with side gussets and raglan sleeves for comfort and mobility. Key characteristics include a no-roll collar, a 3-button front placket with a mic/glasses loop, and two pencil pockets on the left sleeve. The fabric incorporates superior moisture transport, coldblack® Technology for cooling and UV protection (reflecting 80% of UV rays with a minimum UPF 30+), fade-resistance, and an anti-microbial treatment for odor control. Customization requires the DHS emblem to be applied to the left upper front. The polo is available in six stock sizes, from S to 3XL. This specification is likely part of an RFP for procurement of uniforms for the Federal Protective Service.

The Federal Protective Service (FPS) has issued uniform specifications for a unisex grey long-sleeve Special Agent polo shirt, model FPS-158. This document, likely part of a federal RFP, details the required material (100% Polyester), color (grey), and product characteristics. Key features include a relaxed fit, no-roll collar, a 3-button placket with a mic/glasses loop, and two pencil pockets on the left sleeve. The polo is designed for comfort and performance, featuring superior moisture transport, coldblack® Technology for cooling and UV reflection (UPF 30+), fade-resistance, and anti-microbial treatment. Customization requires a DHS emblem on the left upper front, and the polo is available in eight stock sizes from XS to 4XL.

The Federal Protective Service (FPS) has issued uniform specifications for a unisex grey long-sleeve police polo, model FPS-159. This document, likely part of a federal RFP, details the required material (100% Polyester), color (grey), and numerous product characteristics designed for comfort, durability, and professional appearance. Key features include a relaxed fit, no-roll collar, 3-button placket with a mic/glasses loop, two pencil pockets on the left sleeve, superior moisture-wicking, coldblack® Technology for cooling and UV reflection (UPF 30+), fade-resistance, and anti-microbial treatment. Customization requires a DHS emblem on the left upper front, and the polo will be available in 8 stock sizes, from XS to 4XL. These specifications ensure standardized and high-performance uniforms for FPS personnel.

The document outlines the specifications for a gold Federal Protective Service (FPS) Special Agent badge, identified as model FPS-160. Key characteristics include its gold color, hook and loop (Velcro) attachment, and "Special Agent" designation. The badge is a one-size-fits-all product with no customization options. This document, likely part of a federal government RFP, provides clear, concise details for procurement of this specific uniform item.

The Federal Protective Service (FPS) document, FPS-161, outlines the uniform specifications for a unisex black knit cap for police personnel. The cap must be 100% acrylic, black, a knit cap style, and made in the USA. A key customization requirement is the application of the DHS emblem to the center front cuff of the hat. The only specified stock size is RG M. This document, likely part of a federal government RFP, provides clear and concise requirements for vendors to supply the specified uniform item, ensuring standardization and compliance with FPS uniform regulations.

The Federal Protective Service (FPS) has issued uniform specifications for a unisex black knit cap designated for Special Agents. The cap must be made of 100% acrylic, black in color, and manufactured in the USA. A key customization requirement is the application of the DHS emblem to the center front cuff of the hat. The specified stock size for the cap is RG M.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for the U Black Bike Pant, model FPS-163. These pants are made from a 94% nylon/6% Lycra blend and are black. Key product characteristics include a zipper fly with snap closure, flat front with elastic back waistband and drawstring, hook and loop belt keepers, and durable YKK zippers. The design incorporates multiple zipper-closing pockets, including hip, bellowed side cargo with cell phone and dual pen pockets, and back pockets. Functional features for cycling include articulated, vented knees with Lycra and mesh, gusseted zipper openings at the leg bottoms, and a removable elastic stirrup to prevent riding up. The pants are available in stock sizes from RG XS to RG XXL. This document serves as a specification for uniform procurement within the federal government.

The Federal Protective Service (FPS) has issued uniform specifications for a black bike short, designated FPS-164. This document details the material composition, color, and specific product characteristics required for the uniform item. The shorts are to be made of 89% Nylon and 11% Spandex in black. Key features include a zipper fly with snap front closure, a flat front with an elastic back waistband, and hook and loop closing Velcro keepers designed to accept an underbelt. Durable YKK® zippers are specified throughout the garment, which includes two zipper-closing welt back pockets, two zippered hip pockets, and two zipper-closing bellowed side cargo pockets. The cargo pockets are further equipped with internal cell phone pockets and pen compartments. Optional chamois pads and custom inseams are also available. The shorts are available in stock sizes ranging from RG XS to RG XXL.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for a U Tan Rigger Belt, identified as FPS-165. This specification outlines the material as 100% Nylon and the color as Tan. Key product characteristics include a mil-spec. buckle with a "D" ring tie-in anchor point, 1 3/4" Nylon webbing with over 8000 pounds tensile strength, and a Hypalon® abrasion liner to minimize wear. The belt features excessive stitching for durability, Hook & Loop covering to prevent flapping, and a heat-sealed bitter end to prevent unraveling. All belts are made in the U.S.A. The document also specifies three available stock sizes: RG, LG, and XL, with no customization options.

The Federal Protective Service (FPS) has outlined detailed specifications for a Glock 22 Holster with Light (RH), designated FPS-166. This document, likely part of a federal government Request for Proposal (RFP), specifies a 100% black nylon holster featuring a Level I Retention™ system, upgradable to Level II with an optional ALS Guard. Key characteristics include ALS® (Automatic Locking System) for secure weapon retention, an open-top design for quick retrieval, and a non-abrasive material that protects the firearm's finish. The holster is designed with raised stand-off surfaces for dirt and moisture clearance, offers extreme temperature tolerances (-50° F to 300° F), and maintains functionality even when submerged indefinitely. Its matte finish reduces reflection, and it is available in one size for right-hand use. These specifications ensure the procurement of a durable, secure, and highly functional holster meeting the rigorous demands of the FPS.

The Federal Protective Service (FPS) has outlined uniform specifications for a Glock 22 Holster with Light LH, identified as FPS-167. This holster, made from 100% black nylon, features a Level I Retention™ system with ALS® (Automatic Locking System) for secure weapon retention and quick retrieval. Its open-top design, optional ALS Guard for enhanced security, and proprietary non-abrasive nylon blend protect the firearm's finish. The interior's raised stand-off surfaces prevent dirt and moisture contact, while the material offers extreme temperature tolerance (-50° F to 300° F) and indefinite water submersion capability. The matte finish reduces reflection and is easily maintained. The holster is available in one stock size: LH.

The Federal Protective Service (FPS) has released uniform specifications for the "UNV SS Poly T-Shirt - Police," designated as FPS-168. This specification details a navy blue, 100% polyester, high-performance t-shirt designed for law enforcement personnel. Key features include superior moisture management with Acclimate Dry technology, antimicrobial and anti-odor properties (Ag47), and Clean Seam flat-seam technology for comfort during high-exertion activities. The shirt is designed for a regular fit, allowing a full range of motion, and can be worn as a base layer in 40°-60°F temperatures or as a standalone shirt above 60°F. Customization includes a "DHS Police Heat Seal" on the left upper front, and it is available in eight stock sizes from SS S to SS 5XL. This document serves as a guideline for vendors supplying uniforms to the FPS.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-169, outlines the requirements for a U BK Nylon Handcuff Pouch. This specification details the material as nylon and the color as black. Key product characteristics include its availability in two sizes to accommodate one pair of chain or hinged handcuffs, a choice of hook and loop or hidden snap closures, and an optional MOLLE strap. Customization is not available, and the pouch comes in one stock size: RG M. This document serves as a standard for procurement, likely for federal government RFPs, ensuring that all purchased handcuff pouches meet the specified design and material criteria for FPS personnel.

The Federal Protective Service (FPS) has issued uniform specifications for a black, 100% polyester "U BK SS Poly T-Shirt - Police" (FPS-170). Key features include high-performance Acclimate Dry Polyester Eyelet Mesh for superior moisture management, comfort, and durability. The shirt is designed for a regular fit, allowing unrestricted movement during active situations, and can be worn as a base layer in 40°-60°F temperatures or standalone above 60°F. It incorporates an Ag47 antimicrobial/anti-odor system and Clean Seam flat-seam technology to minimize irritation. Customization includes a DHS Police Heat Seal on the left upper front. The shirt is available in eight stock sizes, from SS S to SS 5XL. These specifications are likely part of a federal government RFP for uniform procurement.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-171, details the requirements for a "UNV Legal Advisor Flexfit Ball Cap." This cap is made from a blend of polyester, wool, and Lycra, and comes in navy blue. It features a flex-fit, unisex design and is customized with "Legal Advisor" embroidered on the front and back, along with the DHS emblem on the front above "Legal Advisor." The cap is available in two stock sizes: RG SM and RG LXL. This document is likely part of an RFP for procurement of uniforms for FPS personnel.

The Federal Protective Service (FPS) has released uniform specifications for a tactical shirt, model FPS-172. This document, likely part of a federal government Request for Proposal (RFP), details the material, color, product characteristics, and customization requirements for the U NV SS Tactical Shirt. Key features include a 100% Polyester jersey body in Midnight Navy, snag, fade, and wrinkle resistance with wicking and anti-microbial finishes, and sleeves/collar made from a 55% cotton/45% Cordura® Nylon blend. The shirt is designed with YKK® zippers, Duraflex® pulls, oversized zip-secured sleeve pockets, and loop overlays for ID patches. Despite its tactical design for SWAT teams, it maintains a professional appearance. Customization includes FPS emblems on both shoulders. The shirt will be available in 12 stock sizes, ranging from SS S-4XL and SSL L-4XL.

The Federal Protective Service (FPS) has issued uniform specifications for a tactical shirt, model FPS-173, for use by its personnel. The shirt is designed for SWAT teams and high-level operators, but maintains a professional appearance. Key features include a 6.5 oz 100% Polyester jersey body in Midnight Navy, with snag, fade, wrinkle, wicking, and anti-microbial resistant properties. The sleeves and collar are made from 6.9 oz, 55% cotton/45% Cordura® Nylon (or equivalent) mechanical 2-way stretch double ripstop with a moisture-wicking finish. It incorporates YKK® zippers and Duraflex® pulls (or equivalent). The shirt also includes oversized, zip-secured sleeve pockets with loop overlays for ID patches. Customization requires FPS emblems on both shoulders. The shirt is available in 12 stock sizes, ranging from Regular Small to 4XL, and Tall Large to 4XL.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-174, details the requirements for the U BK Nylon Inner Belt. This specification is crucial for federal government RFPs related to uniform procurement. The inner belt must be made of 100% black nylon, featuring a durable web construction with a full-length hook lining and a hook-and-loop closure for easy use. It has a width of 1.5 inches (38mm) and is available in six stock sizes, ranging from XS to XXL. The document explicitly states that no customization is applicable for this item, ensuring standardization across the FPS uniform components.

This document, FPS-177, outlines the uniform specifications for the FEDERAL PROTECTIVE SERVICE's U CY Low QTR Maritime Shoe. The shoe is specified to be made of 100% Nylon Mesh and microfiber PU upper in black. Key product characteristics include Panama Sole Technology with SOF ROC™ rubber, a dual-density EVA midsole, a full-length Rock 'n Roll Plate™, quick-drying materials, a molded external rubber toe, and injection-molded TPU Heel Counter support. It also features a nylon loop lacing system and an Alta-lite™ blown PU insole. Customization is not available. The shoe is available in 6 sizes, with regular widths ranging from sizes 5-14 (17 sizes) and wide widths ranging from sizes 7-13 (12 sizes). This document serves as a detailed guide for potential suppliers or manufacturers in response to a federal government RFP for protective service uniforms.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-178, outlines the detailed requirements for SS T-Shirts, designed for federal government RFPs. These specifications mandate 100% cotton material in navy blue, emphasizing durability, comfort, and maximum movement. Key features include a 4.7 oz. ringspun cotton fabric, crew neck, 1" no-roll high-density collar, tapered shoulder design, double-stitching, tagless label, and moisture-wicking properties. The shirts are available in both short-sleeve and long-sleeve options across six stock sizes (S-3XL). A critical customization requirement is the DHS badge on the left upper front, signifying its use within federal protective services. This document provides a clear framework for vendors to supply uniform components that meet the specific needs and standards of the FPS.

The Federal Protective Service (FPS) has issued uniform specifications for U KH Tactical Pants, designated FPS-179. These specifications detail the required material composition of 65% polyester and 35% cotton, in a khaki color. Key product characteristics include V2 Fabric Technology with two-way mechanical stretch, a 6.4 oz. fabric weight, double-dyed micro ripstop with a DWR water and stain repellent finish, YKK® zippers, and Prym® snaps. The pants are designed with internal knee pad access and articulated knees for comfort and mobility. Reinforced pocket flaps and gusseted pockets are included for durability and storage. The fabric features 2mm x 2mm double micro ripstop for color-fastness and longevity. Customization is not applicable, and the pants are available in 61 stock sizes, ranging from waist sizes 28 to 54 with various length options.

The Federal Protective Service (FPS) has issued uniform specifications for a black, 100% cotton, short-sleeve T-shirt designated as "POLICE CZ" (FPS-180). This document outlines the material (100% ringspun cotton, 4.7 oz.), color (black), and key product characteristics, including maximum movement design, enhanced durability and comfort, moisture-wicking properties, and a 1" no-roll high-density collar. It features a tapered shoulder design, double-stitching, and a tagless label, suitable as a base-layer or stand-alone shirt. Customization requires a "DHS POLICE" badge on the left upper front. The shirt is available in six sizes, from small to 3XL.

The Federal Protective Service (FPS) document, FPS-181, outlines the uniform specifications for the U CY 6” GTX Maritime Boot. This specification details the required materials, color, product characteristics, and available stock sizes for the boot. Key features include a 100% nylon quick-drying mesh and microfiber PU upper, coyote brown color, Panama Sole Technology with SOF ROC™ rubber, a dual-density EVA midsole, and a full-length Rock 'n Roll Plate™. The boot also incorporates a molded external rubber toe, injection-molded TPU heel counter support, a nylon loop lacing system, Alta-lite™ blown PU insole, and waterproof membrane construction. The document specifies 29 stock sizes, ranging from regular sizes 5-14 and wide sizes 7-13. This type of document is crucial for government RFPs, ensuring that all procured items meet strict federal standards for quality and performance.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for the Blakhak Balaclava (FPS-182). This specification outlines that the balaclava must be made of 6-oz. NOMEX® material in black, providing flash/flame protection for the head and neck. Key characteristics include construction entirely from DuPont™ Nomex® fabric, resistance to flame or combustion up to 800° F (427° C), and flat-seam stitching for comfort when worn with a helmet. The balaclava is available in one stock size: RG M.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-183, details the requirements for a U BK SS FR Baselayer T-Shirt. This specification outlines a black, flame-resistant t-shirt made of 91% Nomex and 9% other materials. Key characteristics include 4-way stretch, excellent moisture management, lightweight design, and high compressibility. It is specifically designed to integrate with the Massif Fire and Ice Layering System. The shirt is available in seven stock sizes, ranging from XS to 3XL. This document serves as a guideline for procuring uniforms that meet the safety and performance standards of the FPS.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-184, details the requirements for the U BK FR Baselayer T-Shirt. This fire-resistant, black baselayer is constructed with Massif fabric and DuPont Nomex fibers, ensuring full flame resistance. Key product characteristics include moisture-wicking properties, a lightweight performance fit, and compressibility. The document specifies that there are seven SKUs available, covering short sleeve options in sizes from XS to 3XL. This document is likely part of an RFP or procurement process for federal government uniforms, outlining the precise specifications for a critical piece of protective gear.

The Federal Protective Service (FPS) Uniform Specifications document, FPS-185, details the requirements for the U BK LS FR Baselayer T-Shirt. This baselayer is constructed from 91% Nomex and 9% other materials, featuring full flame-resistant construction with proprietary Massif® fabrics. Key characteristics include 4-way stretch, excellent moisture management, lightweight design, and high compressibility. It is specifically designed to integrate with the Massif® Fire and Ice™ Layering System. The color specified is black, and it is available in seven stock sizes ranging from RG SX to 3XL. This document, likely part of a federal government RFP, outlines the precise material and performance standards for protective apparel required by the FPS.

The Federal Protective Service (FPS) has issued uniform specifications for a Dark Navy mock turtleneck, model FPS-186. This garment is made of 100% Polyester Microtech™ fabric, offering features such as moisture-wicking, antimicrobial properties, and Anti-Snag technology. It is available in long sleeve, short sleeve, or sleeveless options, with a semi-mock collar, and is proudly Made in USA. Customization includes an embroidered FPS logo on the left side. The turtleneck is offered in nine stock sizes, ranging from RG SX to 5XL. These specifications are likely part of a federal government Request for Proposal (RFP) for uniform procurement.

The Federal Protective Service (FPS) has issued uniform specifications for an External Carrier – Class A (FPS-187). This document, likely part of a federal RFP, details the material, color, and product characteristics of the uniform carrier. Key features include a 100% poly twill blend with Teflon finish, a wicking and odor control lining, and the ability to hold a chest plate. The carrier is designed for durability in harsh climates and includes an embellishment kit with a badge tab, camera loop, and epaulettes. It is breathable, lightweight, and features an inside elastic cummerbund for gear security. The specifications also list available stock sizes ranging from extra-small to 5XL.

The Federal Protective Service (FPS) has released uniform specifications for their FPS-188 F NV External Carrier – Class A. This uniform, made of 100% poly twill blend with Teflon finish and a 100% polyester warp knit tricot mesh lining, is navy in color. Key features include wicking and odor control, a chest plate holder, and an embellishment kit with a badge tab, camera loop, and epaulettes. Engineered for harsh climates and demanding situations, it boasts a breathable, lightweight construction with an inside elastic cummerbund for gear security. The uniform includes topstitching and bartacks at stress points, with certification letters available. It is available in eight stock sizes, ranging from SH XS – M and RG XS – XL. This document outlines the required characteristics for a critical piece of protective equipment for federal officers.

The Federal Protective Service (FPS) has released uniform specifications for the FPS-189 MNV External Carrier – Class B. This document outlines the material, color, product characteristics, and available sizes for this uniform component. Key features include a 100% poly twill blend with Teflon finish, navy color, wicking and odor control lining, capability to hold a chest plate, and an embellishment kit with a badge tab, camera loop, and epaulettes. The carrier is designed for durability in harsh climates, breathability, and comfort, with an inside elastic cummerbund for gear security. It is available in 16 stock sizes ranging from SH XS to LN 5XL. This specification is crucial for vendors responding to government RFPs for uniform procurement.

The Federal Protective Service (FPS) has issued uniform specifications for an External Carrier – Class B, model FPS-190. This document details the material, color, and product characteristics of the uniform outer carrier. It is made from a 100% poly twill blend with a Teflon finish and a polyester warp knit tricot mesh lining, colored navy. Key features include wicking and odor control lining, the ability to hold a chest plate, and an embellishment kit with a badge tab, camera loop, and epaulettes. The carrier is designed for durability in harsh climates, offering breathability and lightweight construction, with an inside elastic cummerbund for gear security. It includes topstitching and bartacks at stress points, with certification letters available. Customization is not offered, and it comes in eight stock sizes ranging from SH XS-M to RG XS-XL.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for the F KH V2 Pant, model FPS-191. These pants are made from a 65% polyester and 35% cotton blend, in khaki color. Key characteristics include proprietary ARMS Fabric with two-way mechanical stretch, double-dyed micro ripstop material with a DWR water and stain repellent finish, YKK® zippers, and Prym® snaps. The design emphasizes comfort and flexibility with a running gusset construction and reinforced pocket flaps with gusseted bottoms for ample storage. The pants are available in 23 stock sizes, ranging from RG 00–22 and LN 00–20.

The Federal Protective Service (FPS) has outlined detailed uniform specifications for a "U NV LS Combat Shirt – FPS POLICE," identified as model FPS-192. This document, likely part of a federal RFP, specifies the material composition for different parts of the shirt: a ripstop blend of cotton, nylon Cordura, and elastane with a Teflon™ finish for the upper shoulders and sleeves, and a wicking and odor-resistant single jersey of cotton and Nylon66 Cordura for the lower body. Key product characteristics include NO melt NO drip fabrics, a ¼ zip closure, dual upper sleeve pockets with pen slots and loop patch platforms, adjustable cuffs, gusseted construction for breathability, reinforced elbows, flat lock seams for comfort, and bar tacking at stress points. Customization requires "POLICE FPS" on both sleeves. The shirts are available in 12 stock sizes, ranging from Regular Small to 4XL and Tall Large to 4XL. This specification ensures standardization and quality for FPS POLICE uniforms.

The Federal Protective Service (FPS) Uniform Specifications document details the requirements for a U BK 9” Waterproof Boot, identified as model FPS-193. These boots are specified to be made from black bull hide leather and feature an anti-slip sole, built-in shock absorption, and a climate system for continuous airflow. Key characteristics include durability, protection from blood pathogens and body fluids, a lightweight design to reduce fatigue, a roomy toe box, 2-zone lacing for a custom fit, and a cushioned, shock-absorbing sole. The specifications also list available stock sizes for both medium (M) and wide (W) widths, ranging from 4.5 to 15. The document indicates no customization options are available for this boot.

The document outlines uniform specifications for personnel in the Aviation Programs Branch, specifically FFDO Students, Instructors, Armorers, and CMSD Instructors, encompassing hats, polo shirts, tactical pants, T-shirts, belts, and backpacks. It details color, style, fabric, size, and embellishment requirements for each item. For instance, FFDO Students wear dark navy adjustable hats with a DHS seal, while FFDO Instructors have red fitted or adjustable hats with a DHS seal, and instructors may have "INSTRUCTOR" embroidered on the back. Polo shirts for FFDO Instructors are range red with "FFDO INSTRUCTOR" embroidered on the right chest, while FFDO Armorers wear khaki/tan polos with a DHS seal on the left chest and "FFDO ARMORER" on the right. General FFDO personnel wear dark navy polos with "FFDO AVIATION PROGRAMS BRANCH" on the right chest. Tactical pants are khaki/tan rip-stop with multiple pockets and reinforced features. T-shirts for FFDO Students are gray with a DHS seal. Rigger belts are specified in black and tan. Backpacks come in green or black Cordura nylon with specific dimensions and features. CMSD Instructors wear black crew shirts with a DHS seal and "CMSD INSTRUCTOR" on the right chest. The specifications emphasize high quality, durability, and precise embellishment details, indicating a procurement or uniform standard document.

The document is a comprehensive list of program and CLIN (Contract Line Item Number) codes for various U.S. government agencies, including CISA, ERO, FAMS, FDA, FEMA, FPS, TSA, USCG, USSS, FLETC, ICE, and CBP. Each agency has a unique set of alphanumeric codes, often followed by a specific descriptor or sub-category. For instance, FAMS includes categories like OTD, APS, K9, FDU, FO, MIS, ACD, TC, and VIPR, while TSA categorizes its CLINs under FEDEXEC, FSD, HG, TSO, NEDCTP, TSI/K9, and TSS-E. CBP further breaks down its CLINs by specific offices or functions, such as CBP, OAM, OBP, OFO, UMC, and OPA, often with additional numerical and alphabetical designators. The document serves as a detailed reference for identifying and tracking specific programs or contract items within these federal entities, likely for administrative, procurement, or operational purposes.

The Department of Homeland Security (DHS) released RFP ATTACHMENT C, REVISION 1, outlining requirements for a department-wide uniform contract. This contract aims to provide uniforms and accessories to approximately 135,000 DHS and FDA personnel across the U.S. and overseas, emphasizing quality, durability, and advanced textile technologies. The scope covers various officer duties and extreme climates, with goals including projecting a professional image, ensuring employee health and safety, providing cost-effective distribution, and incorporating new technologies. The program supports numerous DHS components and the FDA. The contractor must manage the supply chain, provide on-site services at training academies (Glynco, GA, Artesia, NM, and Charleston, SC), and implement a secure, web-based uniform requesting system (WBS) for order and allowance management. The WBS must support various order types, including bulk, government purchase card, allowance account, academy, and special orders, and provide near real-time data reporting. Compliance with federal regulations and specific DHS policies, including the Kissell Amendment and Trade Agreements Act, is mandatory. The contractor is responsible for provisioning, inventory management, customer service, and ensuring uniform items are PFAS-free and meet detailed specifications, with strict timelines for sample approvals and quality control. The system must accommodate both allowance and non-allowance accounts, handle returns/exchanges, and provide robust reporting and data access capabilities for authorized government personnel.

The Department of Homeland Security (DHS) is seeking a contractor for its Department-Wide Uniform Contract to provide uniforms and accessories to approximately 135,000 employees across various DHS components and the Food and Drug Administration (FDA). The Performance Work Statement (PWS) outlines requirements for quality, durable, and functional uniforms suitable for diverse and challenging environments, emphasizing advanced textile technologies. The scope includes managing a secure web-based uniform request system, providing on-site uniform services at training academies, and ensuring timely and fiscally responsible distribution. The contract requires adherence to federal regulations and DHS-specific policies, with detailed specifications for provisioning, inventory management, customer service, and data reporting. The contractor will be responsible for non-COTS, COTS, and MCOTS items, managing allowance and non-allowance accounts, and handling urgent orders for disaster response. The goal is to project a professional image, ensure employee safety, and efficiently manage a comprehensive uniform program.

The Kissell Amendment (clause 3052.225-70 DEVIATION 13-01) in this DHS solicitation mandates that certain textile items must be “grown, reprocessed, reused, or produced in the United States.” However, there are three exceptions. The first covers items listed in FAR 25.104 or those determined unavailable in the U.S., allowing suppliers to seek non-availability exceptions from the Chief Procurement Officer DHS. The second permits incidental amounts of non-compliant fibers, provided their total value does not exceed 10% of the end item’s purchase price. The third exception applies to eligible products as per FAR Subpart 25.4, allowing items from designated countries with trade agreements with the U.S. The applicable list of designated countries varies depending on whether TSA or another DHS Component is funding the procurement, with specific lists for each. Compliance with relevant FAR clauses for eligible products from designated countries fulfills the Kissell clause requirements.

Attachment E outlines the requirements for past performance contract reference data, a common component in government RFPs, federal grants, and state/local RFPs. The document specifies fields for providing detailed information about previous contracts relevant to a bid or proposal. Key data points include the program or task order title, customer name and address, and contact information for both contractual and technical points of contact. Additionally, it requires details on the contract type, contract number, and task order number (if applicable), along with a description of the services provided. This attachment is crucial for evaluating a vendor's experience and capability to perform the solicited work.

Attachment F, the Prior Experience Form (2020-2025), is a crucial document for offerors responding to government RFPs, federal grants, and state/local RFPs. It requires detailed information on past contract performance, particularly within the last five years. The form assesses a contractor's capabilities as a prime contractor, their experience with subcontractors, and the overall value and duration of referenced contracts. It specifically inquires about the provision of uniforms and related equipment, including the number of accounts and items supported, as well as on-site services like measuring and fitting. The form also covers the ability to handle made-to-measure and female-specific uniforms, urgent orders, and the provision of customer support call centers with specific performance metrics. Key technical requirements include experience with web-based ordering systems (WBOS), data tracking and reporting, electronic invoicing, and shipping to locations outside the continental US. Additionally, it evaluates processes for securing government-furnished information, monitoring customer satisfaction, and implementing environmentally friendly practices. The form also asks about return policies, collaboration with organizations like AbilityOne or UNICOR, near real-time data access, and robust quality control processes. This comprehensive form ensures that prospective contractors demonstrate relevant and recent experience in critical areas for government contracts.

The Department of Homeland Security's Attachment G outlines the Subcontracting Plan requirements for the DHS Uniform Program II, Solicitation Number 70B01C19R00000003. This document serves as a guideline for contractors to meet Public Law 95-507 and FAR Subparts 19.7, aiming to promote subcontracting with small businesses. It details DHS's subcontracting goals for fiscal year 2019, including 42% for small businesses, 3% for HUBZone, 5% for small disadvantaged, 5% for women-owned, 3% for service-disabled veteran-owned, and 3% for veteran-owned small businesses. The plan covers identification data, types of plans (individual, master, commercial), and specific goals for various socio-economic categories, emphasizing that higher proposed cumulative subcontracting dollars lead to a competitive advantage. It also requires contractors to explain their methods for developing goals and allocating indirect costs. Key sections address the responsibilities of the plan administrator, efforts to ensure equitable subcontracting opportunities, inclusion of FAR clauses in subcontracts, reporting requirements via eSRS, record-keeping protocols, and procedures for timely payments to subcontractors. The document underscores the importance of a good faith effort to achieve subcontracting goals, with signatures required from the submitting company and reviewing parties.

This document outlines the uniform specifications for Canine Unit personnel, detailing various apparel and gear items across male and female categories. The required items include short and long-sleeved performance polos in dark navy, tactical lightweight pants in khaki/tan, a khaki/tan boonie hat, black 5-in-1 parka jackets, black windbreaker jackets, a tan rigger's belt, tan/coyote 6-inch boots, and a black ball cap. Additionally, navy short and long-sleeved crew shirts for DHS personnel are specified. Each item lists color, style, fabric composition, size ranges, and specific embellishments such as DHS seals and “CANINE TRAINING CENTER” embroidery, emphasizing high quality, durability, and resistance to fading, shrinking, and wrinkling.

The U.S. Customs and Border Protection (USBP) Uniform Specification outlines the requirements for male dress shirts for Border Patrol personnel. This commercial item description covers both long and short-sleeved versions, detailing style, salient characteristics, fabric, sizing, and emblem placement. Key features include a dress style with a top center placket, tapered fit, banded collar, and dress shirttail. The shirt must have two hex-shaped breast pockets with inverted pleats, three-point scalloped cover flaps, a hook & loop closure with a faux button, and a pen hole in the left pocket flap. Functional epaulets and permanent silicone creases are also specified. The fabric must be 75% polyester/25% wool, machine washable, and meet specific colorfastness requirements for Border Patrol Green. Sizing charts are provided for both long and short sleeves. Official U.S. Customs and Border Protection Keystone and Border Patrol Round Emblems must be sewn on the right and left sleeves, respectively. Manufacturers must certify that the product meets these specifications and conforms to commercial marketplace standards.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specification for female dress shirts, both long and short-sleeved (CBPOBP-007 and CBPOBP-006). It details the required style, including a tapered fit, banded collar, dress shirttail, inverted pleated breast pockets with specific flap features (three-point scalloped, hook & loop closure with faux button, pen hole in left pocket), and functional epaulets. The shirt must button right over left, have a single-point back shoulder seam, and feature permanent silicone creases on the front and back. Specific buttonhole placements for nameplates and badges are mandated. The fabric is a machine-washable 75% polyester/25% cotton blend, meeting specified colorfastness characteristics to laundering, light, crocking, and perspiration in Border Patrol Green. Shirts are available in female sizes 28-48. Emblems, specifically the official U.S. Customs and Border Protection Keystone Emblem and the USBP Round Emblem, must be sewn on the right and left sleeves, respectively, at a precise distance below the sleeve set seam. Workmanship standards require the shirt to be free of defects and seamed with matching polyester thread. Manufacturers must certify that their product meets these salient characteristics and conforms to commercial marketplace standards, with the Government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a commercial item description for unisex tactical enforcement uniform shirts for Aviation Specialists and Federal Agents. This document details the requirements for both short and long-sleeved shirts, specifying a traditional button-front style with a medium spread collar, two chest pockets with flaps, and back yoke ventilation. Key features include a seven-button front, vented back yoke with mesh, stretch side panels, and hook and loop closures for pockets. The fabric is a 65% polyester/35% cotton ripstop stretch with a Durable Water Repellent treatment, and side panels are 92% nylon/8% Lycra® mesh. The shirts must be Tan (color chip 30279) and available in unisex sizes XS-4XL in various lengths. Specific emblem placement for Aviation Specialist and Federal Agent badges, as well as CBP AMO arm patches, is also detailed. Manufacturers must certify that the product meets these specifications and is commercially available.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description (CID) for a long-sleeve, navy, unisex mock turtleneck shirt. This document, CBPOBP-030, outlines the requirements for the uniform item to be worn by both male and female Border Patrol personnel. Key specifications include a relaxed fit, a fabric blend of 63% nylon, 23% micro polyester, and 14% synthetic elastic (6.5 oz.), and fade resistance. The shirt must feature a knit collar with a 2-inch height, ribbed sleeve cuffs, an extra-long tail, and a finished bottom hem. It must be machine washable. Fabric characteristics are detailed with specific test methods for weight, color (Navy, chip 35044), and colorfastness to laundering, light, crocking, and perspiration. Sizing will range from Extra Small to 4-Extra Large. The letters "USBP" are to be embroidered in gold, ¾-inch block letters on the left side of the collar. Workmanship standards require the shirt to be free of defects and seamed with matching thread. Manufacturers must certify that their product meets these salient characteristics and conforms to their own commercial standards, with the Government reserving the right to verify conformance.

This U.S. Customs and Border Protection (CBP) document specifies requirements for unisex long and short sleeve mock turtlenecks for Office of Field Operations (OFO) personnel. The specification details two fabric options: a wicking blend (23% polyester, 63% nylon, 14% Spandex®) and 100% cotton, both 6.0 oz. and machine washable. Key characteristics include a relaxed fit, fade and pilling resistance, a knit collar with a 2-inch height, and an extra-long tail. Long-sleeve versions feature ribbed cuffs, while short-sleeve versions have a finished sleeve. All shirts must have no side seams and a finished bottom hem. The document also specifies unisex sizing (XS to 3XL),

This document outlines the specifications for a sleeveless mock turtleneck dickie to be worn by male and female personnel of the U.S. Customs and Border Protection Office of Field Operations, detailing fabric composition, sizing, embroidery requirements, and workmanship standards. The dickie is made from a 60% cotton and 40% polyester blend and is machine washable, with specific colorfastness characteristics. A recent change in the document updated the embroidery color from gold to gray, effective as of September 2025.

This document outlines the U.S. Customs and Border Protection (CBP) Air & Marine Operations (AMO) uniform specification for a flame-resistant, one-piece, tan flight suit. This

The U.S. Customs and Border Protection (CBP) Air & Marine Operations (AMO) requires a one-piece, tan, unisex flight suit for its personnel, detailed in this commercial item description. The flight suit must be flame-resistant, unlined, and feature a two-way front closure, bi-swing action back, and various pockets, including a cooling portal above the hip. Constructed from 4.0-4.5 oz/square yard 100% flame-resistant meta-aramid fabric (Nomex® or similar), it must meet specific flame resistance standards, including an average char length of not more than 6 inches and no melting or dripping. The suit must be tan and available in a comprehensive range of men's and women's sizes. Branding requirements include the CBP AMO Keystone and Round Emblems, a badge-shaped loop patch on the upper left chest, and a 2”x4” loop patch for a nametag on the upper right chest, all to be sewn on. Manufacturers must certify that the product meets these specifications and is commercially available, with the government reserving the right to verify conformance.

This document outlines the U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) uniform specification for a long-sleeve, quarter-zip, flame-resistant Aviation Enforcement Shirt. The shirt must be made from 100% flame-resistant meta-aramid fabric (Nomex® or similar) in Coyote Tan, featuring moisture-wicking, fast-drying, and four-way stretch properties. Key characteristics include a quarter-length front zip, turtleneck collar, flat and dropped seam construction, thumb loops, and machine washability. The fabric must meet specific flame resistance standards, including an average char length not exceeding 6 inches and afterflame of no more than 2.0 seconds, without melting or dripping. The shirt will be available in unisex sizes from Extra Small to 3-Extra Large. It requires specific tan loop fastener patches for official CBP AMO emblems and badges: the Keystone Emblem on the right sleeve, the Round Emblem on the left sleeve, and the Federal Agent Badge on the upper left chest. Manufacturers must certify that the product meets these specifications and is commercially available, free from defects.

This document, CID1-2-18 (a-b), outlines the U.S. Customs and Border Protection's (CBP) uniform specifications for unisex navy coveralls to be worn by Office of Field Operations (OFO) personnel. It details requirements for both long-sleeve (CBPOFO-543) and short-sleeve (CBPOFO-544) versions. Key characteristics include a one-piece, front-entry style with a two-way zipper, pleated bi-swing back, various pockets (breast, hip, slash, rule), a waistband, and permanent press, stain-resistant fabric. The coveralls must be made from a 65% polyester/35% cotton 7.5 osy twill, in Navy color (FED-STD 595C color chip 35044 or similar), and available in sizes 34-60 regular and 38-56 long. Specific emblems and customizations are mandated: the OFO Round Emblem on the left sleeve, the CBP keystone on the right sleeve, and the CBP Seal on the left upper front chest with embroidered "OFO" in silver white thread below it. The document also specifies workmanship standards, requiring the coveralls to be free of defects. Manufacturers must certify that their product meets these salient characteristics and conforms to commercial marketplace standards, with the government reserving the right to require proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for an unbranded, long-sleeved, green, unisex Rough Duty Uniform (RDU) shirt for U.S. Border Patrol (USBP) personnel attending the Federal Law Enforcement Training Center (FLETC). The shirt is a dress style with specific design elements including a top center placket, banded collar, stretch side and underarm inserts made of mesh for ventilation, two inverted pleated breast pockets with faux button hook & loop closures, a pen hole in the left flap, and functional epaulets. The fabric is a 65% polyester/35% cotton ripstop blend for the main body and 92% nylon/8% elastomeric stretch fibers for the side/underarm knit, both machine washable and meeting specific colorfastness and weight requirements. It is available in unisex sizing (XS-3XL Regular and M-3XL Long) and features detailed construction specifications for the collar, front, sleeves, cuffs, buttons, and pockets, ensuring durability and functionality. The document emphasizes adherence to a specific olive drab green color and outlines workmanship standards and manufacturer certification requirements to ensure product quality and conformity with commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a commercial item description (CID) for a unisex black enforcement T-shirt. This document, CID1-2-22, outlines the requirements for both long and short-sleeve versions to be worn by AMO personnel. Key specifications include a relaxed fit, 100% preshrunk cotton fabric weighing 6.1 oz./square yd, fade-resistant color, a printed tagless label, ribbed crew neck collar, and no chest pocket or side seams. The T-shirt must feature shoulder-to-shoulder taping, flat seam shoulder construction, and double-needle cover-stitching. It must be machine washable and available in sizes from Extra Small to 3-Extra Large. Emblems and branding require the official U.S. Customs and Border Protection FEDERAL AGENT Badge to be screen-printed in yellow gold on the left chest. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards. The document also details fabric testing requirements for weight, color, and colorfastness.

The U.S. Customs and Border Protection (CBP) Air & Marine Operations (AMO) has issued a uniform specification (CID1-2-25 (a-b)) for a two-piece flame-resistant flight suit shirt for both male (CBPOAM-409) and female (CBPOAM-422) personnel. The shirt must be constructed from durable ripstop fabric, such as Nomex® and Kevlar® or equivalent, and be machine washable. Key features include a mandarin collar, front zipper closure, hook and loop wrist cuff adjustments, two zippered chest pockets, two upper arm pockets, and an upper shoulder pen pocket. The fabric must meet specific colorfastness requirements to laundering, light, crocking, and perspiration (NAVAIR Tan, FED-STD 595C, AATCC 61, 1A, AATCC 16E, AATCC 8, AATCC 15). Flame resistance is critical, with the fabric required to meet NFPA 1975:3.3.9 standards, including an average char length of no more than 6 inches, an average afterflame of no more than 2.0 seconds, no melting or dripping, and thermal shrinkage of no greater than 10 percent. The shirt will be available in XS-3XL for short, regular, and long sizes for both men and women. It must accommodate specific CBP AMO emblems and badges, including the Keystone Emblem, Round Emblem, and Federal Agent Badge, with designated loop fastener patches for attachment. Manufacturers must certify that their product meets these specifications and quality assurance practices, with the Government reserving the right to verify conformance.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specifications for the Regular Duty Uniform (RDU) Navy shirt worn by male and female personnel in the Office of Field Operations (OFO). The specification covers both long and short-sleeve versions, including made-to-measure options. Key characteristics include a dress style with specific pocket designs (including a pen hole), military-style creases on the front and back, and mesh paneling for ventilation. The fabric is a blend of polyester and cotton ripstop with nylon and spandex stretch for side panels, all in navy blue. Detailed sizing information is provided for both male and female regular and long fits, as well as made-to-measure. Specifics on collar construction, front placket, sleeve features, buttons, and emblem placement (CBP OFO Keystone Emblem, OFO Round Left Shoulder Emblem, name tape, and rank patches) are included. The document also specifies quality workmanship and requires manufacturer certification of conformance to these specifications and commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) document details the uniform specifications for the Regular Duty Uniform (RDU) Shirt for Office of Border Protection (OBP) personnel. It covers male and female versions, available in long and short sleeves, including made-to-measure options. Key features include a dress style with specific collar, pocket, and placket designs. The shirt is made from a 5.8 oz/yd² 65% polyester/35% cotton stretch ripstop fabric, with mesh side panels and back for ventilation, and is PFAS-free. The document outlines sizing for male and female personnel, specific construction details for collars, fronts, sleeves, and cuffs, and requirements for buttons, subdued emblems, and nametapes. Workmanship standards and manufacturer certification of adherence to these specifications are also included, with a version history indicating the creation of this new CID for the CBP RDU OD shirt with subdued patches.

This document outlines the U.S. Customs and Border Protection (CBP) uniform specification for black unisex enforcement T-shirts, covering both short and long sleeve versions for Agriculture Specialists and other Office of Field Operations (OFO) personnel. Key requirements include a semi-compression fit, long torso, raglan sleeves, four-way stretch knit fabric, and properties such as fade resistance, moisture-wicking, and anti-microbial protection. The fabric is 100% polyester, 6.5 oz/yd², PFAS-free, and must meet specific test methods for weight, color, and colorfastness. Sizing ranges from XS to 5XL. Emblems and branding are detailed for each T-shirt type, with specific silk-screened designs for the front and back. The document also specifies workmanship standards and requires manufacturers to certify product conformance to these characteristics and commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a commercial item description (CID) for a unisex, navy blue, long-sleeve Special Operations Shirt. This shirt is specifically designed for male and female personnel of the Special Response Team (SRT) within OFO. The CID details specific style requirements, including a full-zip front, high-rise convertible collar, multiple pockets with hook and loop or zipper closures, and articulated sleeves with gussets and adjustable cuffs for freedom of motion. The shirt will feature various loop attachment patches for identification, branding, and rank, with the OFO SRT Badge patch sewn to the left chest. Fabric specifications include a 65% polyester/35% cotton, 6.5 oz/yd2 rip-stop material in Navy (Pantone#: Anthracite 19-4007 TPX), meeting specific colorfastness requirements. The shirt will be available in unisex sizes small to 2XL, free of defects, and sewn with matching polyester thread. Manufacturers must certify that the product meets the described salient characteristics and conforms to their own quality standards, with the government reserving the right to require proof of conformance. This CID, updated to version 2 (CBPOFO-403), replaces the discontinued CBPOFO-271.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for the unisex Special Operations Shirt for the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO) Special Operations Group (SOG) and Special Response Team (SRT) personnel. The shirt, available in camouflage, features a full-zip front, stand-up collar, chest and bicep storage pockets, underarm gussets, and adjustable cuffs. It is designed for improved freedom of motion with a full-cut pattern and bi-swing shoulders. Specific loop attachments and patches are detailed for each CBP component (CBPOBP-318, CBPOFO-501, CBPOAM-319), including placements for name tapes, unit insignia, badges, and rank. The fabric is a PFAS-free 57% nylon, 43% cotton ripstop, meeting specific colorfastness requirements. The shirt will be available in unisex sizes S-3XL in Regular and Long lengths, free of defects, and consistent in color with uniform pants.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for a unisex camouflage Combat Shirt designed for the Special Operations Group (SOG) of the U.S. Border Patrol (USBP) and the Special Response Team (SRT) of the Office of Field Operations (OFO). The shirt features a ¼ zip front, mandarin collar, reinforced elbows, bicep pockets, and adjustable cuffs. The torso is made from snag-resistant, wicking, fast-drying, antimicrobial fabric (64% modacrylic, 21% viscose, 15% nylon knit), while the sleeves are a 50% nylon/50% cotton ripstop blend (57% nylon, 43% cotton woven). The document specifies

This U.S. Customs and Border Protection (CBP) document outlines the uniform specifications for Combat/Maritime Enforcement Shirts worn by personnel in Air and Marine Operations (AMO), the Office of Professional Responsibility (OPR), and the Office of Field Operations (OFO). The document details specific characteristics for three models: CBPOAM-434 (AMO Maritime Enforcement Shirt, Tan), CBPCBP-385 (Combat Shirt, Navy, OPR), and CBPOFO-505 (Combat Shirt, Navy, SRT). Key features include ¼ zip front closures, mandarin collars, reinforced elbows, bicep pockets, and adjustable cuffs. Fabric requirements vary by model, with specifications for material composition, thermal properties, color, and colorfastness. Customization details for emblems, badges, and loop fastener patches are provided for each shirt type. The shirts are available in Unisex sizes Small – 2XL, with strict workmanship and certification requirements to ensure quality and compliance.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specification for the Performance Patrol Shirt (PPS) for both male and female personnel in the Office of Field Operations (OFO). The specification covers style, salient characteristics, fabric composition (39% cotton, 36% polyester, 25% wicking polyester), and sizing (XS-6XL for males, XS-3XL for females, with Made to Measure options). Key features include moisture-wicking breathable fabric to reduce heat stress when worn under body armor, reinforced elbows, bicep pockets, pen pockets, and loop fastener patches for name tape, rank, and badges. The document also details emblem placement and various design revisions, ensuring the shirt meets specific functional and aesthetic requirements for CBP OFO personnel.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specifications for the Performance Patrol Shirt (PPS) for Air and Marine Operations (AMO) and U.S. Border Patrol (USBP) personnel. The PPS is designed for both male and female staff, available in long and short-sleeve versions, and features moisture-wicking, breathable fabrics for comfort and heat stress reduction. Key characteristics include compatibility with body armor, a tapered fit for layering, seamless shoulders, and bicep pockets with zipper closures and pen slots. Long-sleeve shirts also have reinforced elbows and adjustable cuffs. The fabric is a blend of 68% polyester and 32% cotton, with ripstop weave for the upper torso and sleeves, and knit for the lower torso. It is tan in color and meets specific colorfastness requirements. The document details precise placement and specifications for AMO and USBP patches and emblems, including loop fasteners for various insignia. The shirt must be free of defects, sewn with matching polyester thread, and manufacturers must certify compliance with these specifications.

This document outlines the U.S. Customs and Border Protection (USBP) uniform specification for the Performance Patrol Shirt (PPS) for male and female personnel. The PPS is designed to be worn under body armor, featuring moisture-wicking, breathable fabrics to reduce heat stress and maximize comfort. Key characteristics include a tapered fit, gusseted underarms, bicep pockets with zippers, reinforced elbows, adjustable cuffs on long sleeves, and a front placket with button closure. The upper torso and sleeves are a ripstop blend of 61% polyester (25% moisture-wicking) and 39% cotton, while the lower torso is 100% moisture-wicking polyester, both free of PFAS. The shirt is available in various short and long-sleeve sizes, including made-to-measure, in Olive Drab. Emblems, including the U.S. Customs and Border Protection Subdued Keystone, USBP Round Left Shoulder Subdued, and USBP Subdued Badge, are specified for placement, along with a nametape and an olive drab loop fastener patch. The document also details fabric requirements and test methods for colorfastness and includes certification requirements for manufacturers.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for a Seized Property Specialist (SPS) polo shirt for male and female personnel of the U.S. Border Patrol (USBP). This commercial item description details requirements for both short and long-sleeve versions. Key features include a three-button placket with a mic loop, raglan sleeves, two pencil pockets on the upper left sleeve, a no-roll collar with concealed stays, and side panels with a bottom vent. The fabric must be 100% black polyester pique knit, weighing 6.5 oz, with moisture-wicking, fast-drying, UV protection (minimum 30 UPF), anti-microbial, stain-resistant, shrink-resistant, no-snag, and colorfast properties. Sizing ranges from XS to 4XL. Emblems and embroidery specifications include the official CBP Seal on the upper left chest, "SEIZED PROPERTY SPECIALIST" in gold letters below the badge, and the individual's name in white letters on the right chest. This document updates previous versions, discontinuing older models and changing the seal from DHS to CBP.

The U.S. Customs and Border Protection (CBP) Air & Marine Operations (AMO) has issued a uniform specification for a unisex Administrator Polo Shirt. This specification, CID1-4-02 (a-b), covers both short-sleeve (CBPOAM-026) and long-sleeve (CBPOAM-206) black polo shirts. Designed for male and female AMO personnel, the shirt must be made from 100% polyester, offering fast-drying and moisture-wicking properties, and feature a Coldblack® or equivalent UV protection finish, anti-microbial, stain, and shrink resistance. Key design elements include a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. Available in sizes Small to 3XL, the shirt will be black with specific embroidered AMO Air and Marine Eagle emblems on the front chest, detailing

The U.S. Customs and Border Protection Air & Marine Operations (AMO) has issued a uniform specification for unisex Administrator Polo Shirts, available in short and long sleeve black versions (CBPOAM-026 and CBPOAM-206). These shirts are for male and female AMO personnel and must be made from 100% polyester, fast-drying, moisture-wicking fabric with a weight of 6.5 oz. Key features include a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. The fabric also requires Coldblack® or equivalent UV protection, anti-microbial, stain-resistant, shrink-resistant, and no-snag properties, ensuring colorfastness and machine washability. Sizing ranges from Small to 3XL. The shirt must feature an embroidered AMO Air and Marine Eagle emblem on the front chest, upper left, using silver-white thread on black polos.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for the Air & Marine Operations (AMO) Firearms Instructor Polo Shirt, available in both short (CBPOAM-308) and long sleeve (CBPOAM-309) versions. Designed for both male and female personnel, the unisex polo shirt must be made from 100% polyester, fast-drying, moisture-wicking fabric weighing 6.5 oz. Key features include a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. The fabric must also be anti-microbial, stain-resistant, shrink-resistant, no-snag, and colorfast, with Coldblack® or equivalent UV protection. Available in red (FED-STD 595C) and sizes Small to 3XL, the shirt requires specific emblems: an Official AMO Federal Agent badge (CBPOAM-197) sewn 4.5 inches from the placket edge on the front chest upper left, with “FIREARMS INSTRUCTOR” embroidered in gold 5/16-inch letters centered 3/8 inches below the badge.

This document, CID1-4-06 (a-b), outlines the specifications for the U.S. Customs and Border Protection (USBP) Unisex Polo Shirt, a commercial item description for federal government RFPs. It details requirements for both short and long-sleeved versions of the black polo shirt, to be worn by U.S. Border Patrol personnel. Key characteristics include a 100% polyester, fast-drying, moisture-wicking, anti-microbial, and stain-resistant fabric weighing 6.5 oz, with Coldblack® or equivalent UV protection. The shirt design features a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. Sizing ranges from Small to 3XL. Emblem requirements include a 2.5” round DHS emblem, “U.S. CUSTOMS AND BORDER PROTECTION,” and “USBP” embroidered in specific gold lettering and placements. All patches and emblems must be sewn with matching thread.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specifications for the Instructor Polo Shirt, available in both short (CBPOBP-029) and long sleeve (CBPOBP-306) versions. Designed for male and female USBP personnel, the unisex polo must be 100% polyester, fast-drying, and moisture-wicking, with a fabric weight of 6.5 oz. Key features include a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. The material must also be anti-microbial, stain-resistant, shrink-resistant, no-snag, colorfast, and machine washable, with Coldblack® or equivalent UV protection. The color is dark navy blue (FED-STD 595C color chip 35044), and sizing ranges from small to 3XL. Emblems and embroidery requirements include an official USBP Patrol Agent badge (CBPOBP-097) on the front upper left chest, sewn 4.5 inches from the placket, with “INSTRUCTOR” embroidered in 5/16-inch gold letters centered ½ inch below the badge.

This U.S. Customs and Border Protection (USBP) Uniform Specification, CID1-4-08 (a-b), details the requirements for the red Firearms Instructor Polo Shirt for male and female U.S. Border Patrol personnel. The document outlines specifications for both short and long sleeve versions (CBPOBP-027 and CBPOBP-028, respectively). Key features include a 100% polyester, fast-drying, moisture-wicking, anti-microbial, stain-resistant, shrink-resistant, no-snag, and colorfast fabric with UV protection. The polo shirt will have a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. It will be red (FED-STD 595C) and available in sizes Small to 3XL. Emblems and embroidery include an official USBP Patrol Agent badge on the front upper left chest, with “FIREARMS INSTRUCTOR” embroidered in gold 5/16-inch letters centered beneath the badge. This document serves as a standard for procurement, ensuring uniformity and specific functional characteristics for these specialized uniform shirts.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specification for a unisex polo shirt designed for the USBP Bicycle Patrol. The specification covers both short and long-sleeve versions (CBPOBP-203 and CBPOBP-202) and details the required style, salient characteristics, material, color, sizing, and emblem/embroidery requirements. Key features include a 100% polyester fast-drying, moisture-wicking fabric weighing 6.5 oz, Coldblack® or equivalent UV protection, anti-microbial, stain, shrink, and snag-resistant properties. The shirt must be white, available in sizes Small to 3XL, and feature a three-button placket, raglan sleeves, pencil pockets, rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. Emblems include an official USBP Patrol Agent badge on the front chest and a dark green screen print on the back reading "U.S. BORDER PATROL" in three centered lines, with specific dimensions and placement.

This U.S. Customs and Border Protection (USBP) document outlines the specifications for the Instructor Polo Shirt, a unisex garment for male and female U.S. Border Patrol personnel. The polo shirt, available in short and long sleeves, must be made from a 100% polyester, 6.5 oz fabric that is fast-drying, moisture-wicking, anti-microbial, stain-resistant, shrink-resistant, no-snag, and colorfast. It must also feature Coldblack® or equivalent UV protection. Key design elements include a three-button placket, raglan sleeves, upper left sleeve pencil pockets, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. The shirt will be green (FED-STD 595C color chip 34083) and available in sizes Small to 3XL. Emblems and embroidery include an official USBP Patrol Agent badge sewn on the upper left chest, 4.5 inches from the placket edge, with “INSTRUCTOR” embroidered in 5/16-inch gold letters centered ½ inch below the badge.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) requires Class 5 Polo Shirts for its male and female personnel. This commercial item description outlines the specifications for both short-sleeve (CBPOFO-234) and long-sleeve (CBPOFO-235) unisex polo shirts. Key features include a 100% polyester, fast-drying, moisture-wicking, anti-microbial, and stain-resistant fabric weighing 6.5 oz, with Coldblack® or equivalent UV protection. The shirts must be dark navy blue (FED-STD 595C color chip 35044), available in sizes Small to 3XL, and feature a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. Required emblems and embroidery include a 2.5” round DHS emblem on the upper left chest with “U.S. CUSTOMS AND BORDER PROTECTION” in ¼” white letters above and “OFO” in ½” white thread below. The wearer’s last name in ½” white letters must be embroidered on the upper right chest, even with the badge.

This U.S. Customs and Border Protection document outlines the uniform specifications for the Office of Field Operations (OFO) unisex polo shirt, available in short and long sleeves (CBPOFO-025 and CBPOFO-026). The shirt must be made from 100% polyester, fast-drying, moisture-wicking fabric weighing 6.5 oz, with Coldblack® or equivalent UV protection, anti-microbial, stain, and shrink-resistant properties. Key design elements include a three-button placket, raglan sleeves, upper left sleeve pencil pockets, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. The color is dark navy blue (FED-STD 595C color chip 35044), and sizing ranges from Small to 3XL. Emblems and embroidery requirements specify an official OFO Officer badge (CBPOFO-158) sewn on the front upper left chest and the officer's last name embroidered in ½” white letters on the front upper right chest.

The U.S. Customs and Border Protection Office of Field Operations (OFO) has issued a uniform specification for a unisex navy polo shirt designated for OFO Instructors. This commercial item description outlines the requirements for a short-sleeve polo made from 100% polyester, featuring fast-drying, moisture-wicking, anti-microbial, stain-resistant, and shrink-resistant properties. Key design elements include a three-button placket, raglan sleeves, pencil pockets on the left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. The shirt must be dark navy blue (FED-STD 595C color chip 35044) and available in sizes Small to 3XL. Emblems and embroidery specifications require the official OFO Officer badge (CBPOFO-158) to be sewn on the upper left chest, with "INSTRUCTOR" embroidered in gold 5/16" letters centered beneath it.

The U.S. Customs and Border Protection, Office of Field Operations (OFO), has issued a uniform specification for a unisex polo shirt for Firearms Instructors. This commercial item description details requirements for both short-sleeve (CBPOFO-210) and long-sleeve (CBPOFO-211) versions. The polo shirt must be made from 100% polyester, fast-drying, moisture-wicking fabric with a weight of 6.5 oz. Key features include a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. The fabric must also be anti-microbial, stain-resistant, shrink-resistant, no-snag, and colorfast, with Coldblack® or equivalent UV protection. Available in red (FED-STD 595C) and sizes Small to 3XL, the shirts require specific emblems: an Official OFO Officer badge on the front upper left chest, sewn 4.5” from the placket edge, with “FIREARMS INSTRUCTOR” embroidered in 5/16” gold letters centered below the badge.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for unisex polo shirts for male and female personnel within the Office of Training and Development (OTD). The specification covers both short and long-sleeve black and white polo shirts (CBPUMC-017 to CBPUMC-020). Key characteristics include 100% polyester, fast-drying, moisture-wicking fabric, a three-button placket, raglan sleeves, pencil pockets, a rib-knit collar with concealed stays, side panels, and microphone holders. The fabric must be 6.5 oz, anti-microbial, stain-resistant, shrink-resistant, no-snag, colorfast, and machine washable, with Coldblack® or equivalent UV protection. Available in black, sizes range from Small to 3XL. All shirts must feature the official CBP Seal on the upper left chest, sewn 4.5 inches from the placket edge.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specifications for the Office of Public Affairs (OPA) Polo Shirt, including requirements for federal government RFPs. The unisex polo shirt, available in black and white, comes in both short and long sleeve versions (CBPOPA-005 to CBPOPA-008). Key features include 100% polyester, fast-drying, moisture-wicking, anti-microbial, stain and shrink-resistant fabric with UV protection (Coldblack® or equivalent), a three-button placket, raglan sleeves, pencil pockets, rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. Emblems include the official CBP Seal and "PUBLIC AFFAIRS" embroidered in gold (black polo) or royal blue (white polo) thread. Sizing ranges from Small to 3XL. Revisions indicate updates to embroidery size and the seal used.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for a black, maternity polo shirt for female personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air & Marine Operations (AMO). The shirt can be short or long-sleeved with a three-button placket, dual pen pockets on the left sleeve, and integrated mic loops. It must be made from a knit polyester fabric (6.0-7.0 oz./yd2) with an odor-resistant finish, be machine washable, and allow for stretch using Lycra or spandex. Key characteristics include dyed-to-match melamine buttons, raglan sleeves, and specific hemming for short and long sleeves. The shirt must be black, available in sizes XS-XL, and feature the official CBP Seal on the upper left chest. Manufacturers must certify that the product meets these specifications and their own quality standards, with the Government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for unisex polo shirts for Air Marine Operations (AMO) personnel. This CID outlines the requirements for both short-sleeve (CBPOAM-024) and long-sleeve (CBPOAM-030) black enforcement polo shirts. Key features include a 100% polyester, fast-drying, moisture-wicking, anti-microbial, and stain-resistant fabric weighing 6.5 oz. The shirts will have a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. Sizing ranges from Small to 3XL. Emblems and screen printing specifications are detailed: an official AMO Federal Agent badge (CBPOAM-197) on the front chest and a white screen print on the back reading "CBP FEDERAL AGENT" with specific dimensions and placement.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a commercial item description (CID) for a unisex grey polo shirt intended for its Special Response Team (SRT) personnel. The CID, CID1-4-20, outlines the specific requirements for the CBPOFO-364 short-sleeve polo shirt. Key features include a 100% polyester fast-drying, moisture-wicking fabric with a 6.5 oz weight, Coldblack® or equivalent UV protection, anti-microbial, stain, and shrink-resistant properties. The shirt design specifies a three-button placket, raglan sleeves, pencil pockets on the upper left sleeve, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. It will be available in grey (FED-STD 595C) and sizes Small to 3XL. Emblems and embroidery requirements include an Official OFO SRT Grey Officer badge (CBPOFO-283) on the upper left chest and the last name embroidered in ½” dark grey letters on the upper right chest. The document also details workmanship standards, requiring the shirt to be free of defects and stitched with matching polyester thread. Manufacturers must certify that their product meets these salient characteristics and conforms to commercial marketplace standards. This document ensures uniformity and quality for the OFO SRT uniform.

The U.S. Customs and Border Protection (CBP) Office of Training and Development (OTD) has issued a uniform specification for unisex polo shirts. These shirts, available in short and long sleeves and colors black, white, and tan, are made from 100% polyester, fast-drying, moisture-wicking fabric with UV protection. Key features include a three-button placket, raglan sleeves, pencil pockets, rib-knit collar, side panels, and microphone holders. The shirts are sized from Small to 3XL. Emblems and embroidery standards are detailed for each color, featuring the official CBP Seal and "OTD" in specific colors and placements. A recent update changed the DHS Seal to the CBP Seal.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID1-4-22(a-d), for unisex polo shirts designated for Chaplaincy and Peer Support personnel within the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The specification covers both short and long-sleeve black polo shirts (CBPUMC-005, -006, -007, -008). These shirts must be made from 100% polyester, fast-drying, moisture-wicking fabric weighing 6.5 oz, with features like a three-button placket, raglan sleeves, pencil pockets, rib-knit collar, side panels with bottom vents, microphone holders, and Coldblack® or equivalent UV protection. The fabric also needs to be anti-microbial, stain-resistant, shrink-resistant, no-snag, colorfast, and machine washable. Sizing ranges from Small to 3XL. Emblems and embroidery are precisely detailed: the official CBP Seal (CBPCBP-557) is to be sewn 4.5” from the placket edge on the upper left chest, with “PEER SUPPORT” or “CHAPLAIN” embroidered in ¼” white capital letters centered below the emblem. The wearer’s last name will be embroidered in ½” white capital letters on the upper right chest, even with the emblem. All patches and emblems must be sewn with matching thread. The document includes a version history detailing updates to embroidery size, CLIN numbers, and the seal used.

This document, CID1-4-23(a-b), outlines the uniform specification for the U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) Enforcement Polo. It details requirements for both short and long-sleeve unisex polo shirts, made from 100% polyester, fast-drying, moisture-wicking fabric with UV protection, anti-microbial, stain-resistant, shrink-resistant, and no-snag properties. Key features include a three-button placket, raglan sleeves, pencil pockets, a rib-knit collar with concealed stays, side panels with bottom vents, and microphone holders. The polo will be black, available in sizes Small to 3XL. It specifies detailed embroidery for the front chest, including a gold AMO Federal Agent Badge, the DHS seal, "U.S. CUSTOMS AND BORDER PROTECTION," "FEDERAL AGENT," and "*** AIR AND MARINE OPERATIONS ***" in specific font sizes and colors. The document also includes internal communications confirming the creation and review of these specifications.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) Instructor Polo specification details requirements for short and long sleeve black polo shirts for male and female personnel. The polos must be 100% polyester, fast-drying, moisture-wicking, and feature UV protection, anti-microbial, stain, and shrink-resistant properties. Key design elements include a three-button placket, raglan sleeves, pencil pockets, microphone holders, and a rib-knit collar. The shirts will be available in sizes Small to 3XL. Embroidery on the front left chest includes a gold AMO Federal Agent Badge with the DHS seal,

The U.S. Customs and Border Protection (CBP) Office of Professional Responsibility (OPR) has issued a uniform specification for unisex black polo shirts. This commercial item description, covering short and long sleeve versions (CBPCBP-359 and CBPCBP-360), outlines requirements for OPR personnel. Key features include a 100% polyester, fast-drying, moisture-wicking, anti-microbial, and stain-resistant fabric weighing 6.5 oz, with Coldblack® or equivalent UV protection. The shirts will have a three-button placket, raglan sleeves, pencil pockets, a rib-knit collar with concealed stays, side panels, bottom vents, and microphone holders. Sizing ranges from Small to 3XL. Emblems include the OPR Special Agent badge sewn on the upper left chest and the last name embroidered in ½” white letters on the upper right. The document includes review acknowledgments from various CBP personnel, confirming the accuracy of the technical attributes.

This document outlines the U.S. Customs and Border Protection (CBP) uniform specification for the Border Patrol Processing Coordinator (BPPC) Polo Shirt, available in both short and long sleeve versions (CBPUMC-009 and CBPUMC-010). This unisex polo shirt is made from 100% polyester, fast-drying, moisture-wicking, anti-microbial, and stain/shrink-resistant fabric with UV protection. Key features include a three-button placket, raglan sleeves, pencil pockets, a rib-knit collar, side panels with bottom vents, and microphone holders. The shirt is black and available in sizes Small to 3XL. It features the official CBP Seal on the upper left chest, "BPPC" embroidered underneath, and the wearer's first initial and last name on the upper right chest, all in gold lettering. The document also includes a version history detailing changes made to the specification.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for short-sleeve, unisex T-shirts for Air and Marine Operations (AMO) and U. S. Border Patrol (USBP) personnel. The specification details a relaxed fit, 100% preshrunk cotton fabric (5.0 – 6.1 oz./square yd), and a seamless ribbed crew neck. Key features include a printed label (no tag), no chest pocket or side seams, shoulder-to-shoulder taping, flat seam shoulder construction, and double-needle cover-stitching. The T-shirts must be machine washable and available in sizes Small to 3-Extra Large. Color options are (a) Green (discontinued) and (b) Black, with specific colorfastness requirements. Manufacturers must certify conformance to these specifications and commercial standards. A significant update includes discontinuing the green T-shirt and adding a ¼ inch high subdued “DHS” branding silk-screened to the right shoulder sleeve of the black T-shirt.

This document outlines the U.S. Customs and Border Protection's uniform specifications for a unisex, lightweight, level one base layer shirt for Air and Marine Operations, U.S. Border Patrol, and Office of Field Operations personnel. The shirt, available in both short and long sleeves, must be a relaxed fit crew neck made of 100% polyester, 4.0 oz. fabric. Key characteristics include moisture-wicking, fast-drying, breathable, anti-microbial protection, flat seam construction, and machine washable properties. The shirts now include a ¼ inch high subdued “DHS” branding silk-screened on the right shoulder sleeve for short-sleeve or right forearm for long-sleeve versions. The document also notes the discontinuation of several older uniform items and the addition of two new black options with DHS branding.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a lightweight, flame-resistant, unisex Level One base layer shirt, available in tan with short or long sleeves. These shirts are intended for Air and Marine Operations (AMO) and U.S. Border Patrol (USBP) personnel. Key characteristics include flame resistance, relaxed fit, moisture-wicking, fast-drying, breathability, anti-microbial protection, flat seam construction, and machine washability. The fabric is a 78% moda-acrylic and 22% flame-resistant rayon blend (5.0 oz.) and must meet specific test methods for weight, color, colorfastness, and flame resistance (NFPA 1975:3.3.9, 8.6, and ASTM D 6413). The shirts will feature subdued ¼ inch high “DHS” branding and are available in unisex sizes from Extra-Small to 2-Extra Large. Manufacturers must certify conformance to these specifications and commercial marketplace standards. This version discontinues black short and long sleeve base layer shirts.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) requires flame-resistant, black, unisex T-shirts, available in short and long sleeves. These T-shirts must be made from 100% flame-resistant meta-aramid fabric (Nomex® or similar), be moisture-wicking with four-way stretch, and feature a seamless crew neck, no chest pocket, and dropped seam shoulder construction. They must be machine washable and meet specific colorfastness, flame resistance (ASTM D 6413/F2302), and thermal shrinkage requirements. Each shirt will have a subdued ¼-inch high “DHS” branding silk-screened on the right shoulder (short-sleeve) or right forearm (long-sleeve). Available in sizes Extra Small to 3-Extra Large, manufacturers must certify that the product meets all salient characteristics and conforms to commercial marketplace standards, free of defects.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specification for a Heavyweight Base Layer Long Sleeve Shirt. This unisex, black shirt is designed for temperatures below 40°F with a slim tactical fit. Key features include moisture-wicking, fast-drying, breathable, anti-microbial fabric with a fleece interior and technical exterior, flat seam construction, gusseted underarm panels, and UPF 50+ UV protection. The fabric is 87% polyester and 13% elastomeric fiber, 8.0 oz/yd², machine washable, and free of PFAS. It includes subdued ¼ inch high “DHS” branding on the right forearm sleeve. The shirt is available in sizes Small to 2-XL, and manufacturers must certify that the product meets these characteristics and commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification (CID10-1-02) for a Silver Eagle Collar Insignia. This insignia is for male and female personnel in Air and Marine Operations (AMO), U.S. Border Patrol (USBP), and the Office of Field Operations (OFO). The insignia is a metal eagle clutching arrows, ½” tall and 31/32” wide, made of red brass with a polished nickel-silver, fade and chip resistant finish. It features two mounting prongs, each secured by a butterfly clutch fastener, and must conform to MIL-DTL 14639/33C-2 unless otherwise specified. Manufacturers must certify that the product meets these characteristics and is commercially available, with the Government reserving the right to verify conformance. Insignias are to be packaged in pairs, with one eagle facing each direction, and must be free of defects.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) CID10-1-03 for a Silver One Star Collar Insignia. This insignia is intended for male and female personnel within Air and Marine Operations (AMO), U.S. Border Patrol (USBP), and the Office of Field Operations (OFO). The insignia is a single, polished nickel-silver metal star, 9/16” in diameter, ½” tall, and 9/16” wide, made of red brass with a fade and chip-resistant finish. It features two mounting prongs with butterfly clutch fasteners and must conform to MIL-DTL 14639/46A-2 unless otherwise specified. Manufacturers must certify that the product meets these characteristics and their own quality standards, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for the Silver Two Star Collar Insignia. This insignia is for male and female personnel in Air and Marine Operations (AMO), U.S. Border Patrol (USBP), and the Office of Field Operations (OFO). The insignia features two metal stars, 9/16” in diameter each, aligned point-to-point and soldered onto a connecting bar. It measures ½” tall and 1-1/8” wide, made of red brass with a polished nickel-silver finish that is fade and chip resistant. Each insignia has two mounting prongs with butterfly clutch fasteners and is packaged two per set. It must conform to MIL-DTL 14639/47A-2 and be free of defects. Manufacturers must certify that the product meets these specifications and their own quality standards, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID10-1-05, for a Silver Three Star Collar Insignia. This insignia is required for both male and female personnel in the U.S. Border Patrol (USBP) and Air and Marine Operations (AMO). The specification details the insignia's design: three 9/16” diameter metal stars mounted point-to-point on a connecting bar, secured by two mounting prongs with butterfly clutches. The insignia must be ½” tall and 1-11/16” wide, made of red brass with a polished nickel-silver, fade and chip-resistant finish, in accordance with MIL-DTL 14639/48A-2 unless otherwise specified. Manufacturers must certify that the product meets these salient characteristics, conforms to their own standards, and is sold commercially, with the government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID10-1-06) for a Silver Four Star Collar Insignia. This insignia is for both male and female personnel in the U.S. Border Patrol (USBP) and Air and Marine Operations (AMO). The insignia features four 9/16” diameter metal stars in a row, mounted point-to-point on a connecting bar, with two mounting prongs secured by butterfly clutches. It must be made of red brass with a polished nickel-silver finish that is fade and chip resistant, measuring ½” tall and 2-¼” wide. The manufacturing must adhere to MIL-DTL 14639/49A-2 standards, ensuring a defect-free product. Manufacturers are required to certify that the product meets these specifications and their own quality assurance practices. The insignia will be available in one size and packaged with two per unit.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specification for the "Insignia, Oak Leaf, Cloth with Hook, Tan" to be worn by Air and Marine Operations (AMO) personnel. The insignia, identified as CBPOAM-443 (discontinuing CBPOAM-171), features a black embroidered oak leaf on a tan twill patch with a hook backing. Key characteristics include a 1" wide by 1-1/8" tall oak leaf on a 1 ¾" wide by 1 ¼" high patch, adhering to MIL-DTL 14651A standards. The patch must match the Tan Performance Patrol Shirt and be free of defects and per- or polyfluoroalkyl substances (PFAS). Manufacturers must certify compliance with these specifications.

This document outlines the U.S. Customs and Border Protection's Uniform Specification for Oak Leaf Insignia for Air and Marine Operations (AMO) personnel. The insignia, an embroidered oak leaf on an unfinished cloth patch, is available in two styles: black thread on a tan patch (CBPOAM-179) and silver thread on a black patch (CBPOAM-185). Key characteristics include a 1” x 1-1/8” oak leaf, a 2” x 2” minimum square patch, and availability in two insignia per package. Materials must be twill fabric, per MIL-DTL-14651A, with specific Pantone color codes for khaki tan, black, and silver. Manufacturers must certify that the product meets all salient characteristics and conforms to commercial marketplace standards, with the government reserving the right to request proof of conformance.

This U.S. Customs and Border Protection (CBP) document specifies the requirements for the 'INSIGNIA, EAGLE, CLOTH WITH HOOK, TAN' to be worn by Air and Marine Operations (AMO) personnel. The insignia, identified as CBPOAM-442 (superseding CBPOAM-169), is an embroidered tan cloth patch with a hook backing featuring a black eagle clutching arrows. Key specifications include the eagle's dimensions (1-½” wide, 5/8” tall), patch dimensions (1 ¾” wide, 1 ¼” high), and material characteristics (twill fabric per MIL-DTL-14651A). The patch must be finished with a turned edge, sewn, and packaged in pairs with eagles facing opposite directions. Manufacturers must certify conformance to these salient characteristics and ensure the product is free of defects and per- or polyfluoroalkyl substances (PFAS).

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for Eagle Insignia to be worn by Air and Marine Operations (AMO) and Office of Field Operations (OFO) personnel. The insignia, available in two styles (tan with black eagle and black with silver eagle), features an eagle clutching arrows embroidered onto an unfinished cloth patch. Key specifications include an eagle size of 1-½” wide by ¾” tall, a minimum 2” x 2” square patch, and packaging in pairs with eagles facing opposite directions. Materials must be twill fabric per MIL-DTL 14651A, with specific Pantone color codes for khaki tan, black, and silver. Manufacturers must certify adherence to these salient characteristics and commercial marketplace standards, with the government reserving the right to request proof of conformance.

This U.S. Customs and Border Protection (CBP) document specifies the requirements for a One Star Insignia with hook backing for Air and Marine Operations (AMO) personnel. The insignia, identified as CBPOAM-440 (superseding CBPOAM-173), features a ¾” black embroidered star on a 1 ¾” x 1 ¼” tan twill fabric patch with a hook backing and sewn, turned edge. It must be free of defects and PFAS, meeting MIL-DTL 14651A standards. The patch color must match the Tan Performance Patrol Shirt (CID1-3-09), and the embroidery must be black. Manufacturers must certify compliance with these salient characteristics. The document includes official sign-offs from various CBP personnel, confirming its accuracy and consistency.

This document, CID10-1-12 (a-b), outlines the U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) uniform specification for One Star Insignia. It details requirements for cloth insignia worn by male and female AMO personnel. Key specifications include a 1-inch embroidered star on at least a 2-inch by 2-inch unfinished cloth patch, available in two per package. The insignia must adhere to MIL-DTL 14651A standards, with specific color variations: black embroidery on a khaki tan patch (CBPOAM-172) or silver embroidery on a black patch (CBPOAM-186). The material is twill fabric, and colors must match specified Pantone codes. Manufacturers are required to certify that the product meets these salient characteristics, their own quality standards, and is commercially available, with the government reserving the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection (CBP) uniform specification for a Two Star Insignia with hook backing, to be worn by male and female Air and Marine Operations (AMO) personnel. The insignia, identified as CBPOAM-441 (discontinuing CBPOAM-174), features two black embroidered stars, ¾” in diameter, aligned vertically on a tan twill fabric patch with hook backing. The patch measures 1 ¾” wide and 1 ¼” high, with a turned and sewn edge. It must conform to MIL-DTL 14651A standards, be free of defects, and available in packages of two. The patch color must match the Tan Performance Patrol Shirt (CID1-3-09), and the embroidery must be black. Manufacturers must certify compliance with all salient characteristics, their own specifications, and guarantee the product is free of per and polyfluoroalkyl substances (PFAS).

This document, CID10-1-14 (a-b), outlines the U.S. Customs and Border Protection's (CBP) uniform specification for Two Star Insignia for Air and Marine Operations (AMO) personnel. The insignia, available in tan (CBPOAM-175) and black (CBPOAM-187) variations, features two embroidered stars aligned point to center on an unfinished cloth patch. Key requirements include each star being 1 inch in diameter, embroidered in black thread on a khaki tan patch or silver thread on a black patch. The twill fabric insignia must conform to MIL-DTL 14651A standards, with specific Pantone color codes for the patch and embroidery. Manufacturers must certify that the product meets all specified characteristics, dimensions, materials, and workmanship standards, ensuring quality and commercial market conformity. The insignia is available in one size and packaged two per package.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for a Three Star Insignia with hook backing for Air and Marine Operations (AMO) personnel. The insignia, designed for both male and female staff, features three ¾” black embroidered stars, point to center, on a 3-¼” x 2” khaki tan twill patch with a hook backing. It must conform to MIL-DTL 14651A standards, be finished with a turned and sewn edge, and packaged two per unit. Manufacturers must certify that the product meets these salient characteristics, their own quality standards, and is commercially available, with the Government reserving the right to verify conformance.

The U.S. Customs and Border Protection Air and Marine Operations (AMO) has issued a uniform specification for a Three Star Insignia. This commercial item description outlines the requirements for insignias to be worn by both male and female AMO personnel. The insignia will feature three 1-inch embroidered stars, point-to-point, on an unfinished 4" x 2" square twill fabric patch. Two color variations are specified: black stars on a khaki tan patch (Pantone 16-1212TC) and silver stars (Pantone 14-5002TC) on a black patch (Pantone 19-4006TC). The insignia must adhere to MIL-DTL 14651A standards unless otherwise specified, be free of defects, and will be sold in packages of four. Manufacturers must certify that their product meets these salient characteristics and conforms to their own quality assurance practices, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a commercial item description (CID) for Four Star Insignia. This CID, CBPOAM-180, outlines the requirements for a tan cloth patch with hook backing, featuring four black embroidered stars. The insignia is designed for both male and female AMO personnel. Key specifications include each star being ¾” in diameter, aligned vertically, and embroidered with black thread on a 3-½” x 2” rectangular khaki tan patch (Pantone 16-1212TC) with a hook backing. The patch must be made of twill fabric per MIL-DTL-14651A and finished with a turned and sewn edge. Manufacturers must certify that the product meets these characteristics, conforms to their own standards, and is sold commercially. The Government reserves the right to request proof of conformance before delivery. The insignia is to be free of defects and available in packages of two, in one size only.

This document, CID10-1-18 (a-b), outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Four Star Insignia worn by Air and Marine Operations (AMO) personnel. The insignia comes in two versions: tan with black embroidery (CBPOAM-177) and black with silver embroidery (CBPOAM-189). Key requirements include four 1-inch embroidered stars in a row, point to center, on an unfinished twill fabric patch at least 5-½” x 2”. The insignia must conform to MIL-DTL 14651A and specific Pantone colors for the patch and embroidery. It is available in one size, packaged two per unit, and must be free of defects. Manufacturers are required to certify that the product meets these characteristics and their own quality standards, with the government reserving the right to verify conformance.

This U.S. Customs and Border Protection (USBP) commercial item description, CID10-1-19 (a-b), outlines the requirements for One Bar Collar Insignia for male and female USBP personnel. The insignia must be a rectangular metal bar, ¾” tall and ¼” wide, with two mounting prongs and butterfly clutch fasteners. It will be available in polished nickel silver and matte black, made of red brass with a fade and chip-resistant finish, and sold in packages of two. The product must meet MIL-DTL 14639/43A-2 and /43A-4 specifications, be free of defects, and come in one size. Manufacturers must certify conformance to these specifications and commercial marketplace standards, with the Government reserving the right to verify compliance before delivery.

This U.S. Customs and Border Protection uniform specification outlines the requirements for the Two Bar Collar Insignia worn by male and female personnel of the U. S. Border Patrol (USBP). The insignia must be two parallel, connected metal rectangular bars, ¾” tall and ¾” wide, with a ¼” gap between them. Each bar will be ¾” tall and ¼” wide, secured by two mounting prongs with butterfly clutches. The insignia will be made of red brass with a fade and chip-resistant finish, available in matte black (FED-STD-595, color chip 37038) or polished nickel-silver. It must meet MIL-DTL 14639/44A-2 standards, be free of defects, and come packaged two per set. Manufacturers must certify conformance to these specifications and their own quality standards, with the Government reserving the right to verify prior to delivery.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description, CID10-1-21 (a-b), for Oak Leaf Collar Insignia to be worn by both male and female personnel of the U.S. Border Patrol. This specification details requirements for a metal oak leaf insignia, 23/32” tall and 5/8” wide, made of red brass. The insignia must be available in matte black (FED-STD-595, color chip 37038) and matte brown (FED-STD-595, color chip 20095), with a non-reflective, fade and chip resistant finish. Each insignia will have two mounting prongs with butterfly clutch fasteners and will be packaged two per set. Manufacturers must certify that their product meets these salient characteristics, conforms to their own specifications, and is sold commercially. The government reserves the right to request proof of conformance.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description, CID10-1-22, for a Black Eagle Collar Insignia. This insignia is for male and female USBP personnel. The specification details a metal eagle clutching arrows, ½” tall and 31/32” wide, with a matte black, non-reflective, fade, and chip-resistant finish. It must be made of red brass, colored Black (FED-STD-595, chip 37038), and include two mounting prongs with butterfly clutch fasteners. Insignias are to be packaged in pairs, with one eagle facing each direction. Manufacturers must certify that the product meets all specified characteristics and conforms to their own quality standards, reserving the right for the Government to request proof of conformance.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description (CID10-1-23) for a Black One Star Collar Insignia. This insignia is intended for both male and female personnel of the U.S. Border Patrol. Key specifications include a single metal star design, 9/16” in diameter, with a matte black, non-reflective, fade and chip resistant finish. It must be made of red brass, feature two mounting prongs with butterfly clutch fasteners, and be packaged two per unit. The insignia's color must conform to FED-STD-595, chip 37038, and it will be available in one size. Manufacturers are required to certify that the product meets all salient characteristics and conforms to their own quality assurance practices, reserving the government's right to request proof of conformance.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description (CID) for Black Two Star Collar Insignia. This document, CBPOBP-147, outlines the specific requirements for collar insignia to be worn by both male and female USBP personnel. The insignia must consist of two matte black metal stars, each 9/16” in diameter, aligned point-to-point and soldered onto a connecting bar. The overall dimensions must be ½” tall and 1-1/8” wide. Made from red brass, the insignia needs to have a non-reflective, fade and chip resistant finish, adhering to FED-STD-595, chip 37038 for color. Each insignia must have two mounting prongs with butterfly clutch fasteners and be packaged two per unit. Manufacturers are required to certify that their product meets all specified salient characteristics, conforms to their own quality standards, and is commercially available, with the Government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID10-1-25) for Black Three-Star Collar Insignia for U.S. Border Patrol (USBP) personnel. This document specifies the requirements for the insignia, which must consist of three matte black metal stars, each 9/16” in diameter, aligned point-to-point on a connecting bar. The insignia must be 1/2” tall and 1-11/16” wide, made of red brass with a non-reflective, fade- and chip-resistant finish. Each insignia requires two mounting prongs with butterfly clutch fasteners and must be packaged two per package. Manufacturers are required to certify that the product meets the specified salient characteristics and conforms to their own quality assurance practices, with the Government reserving the right to request proof of conformance.

This U.S. Customs and Border Protection document outlines the specifications for the Black Four Star Collar Insignia for U.S. Border Patrol personnel. The insignia must consist of four matte black metal stars, each 9/16” in diameter, aligned point to point, and soldered to a connecting bar. It must be ½” tall and 2-¼” wide, made of red brass with a non-reflective, fade- and chip-resistant finish. Each insignia requires two mounting prongs with butterfly clutch fasteners and must be packaged two per set. Manufacturers must certify that the product meets these salient characteristics, conforms to their own specifications, and is sold commercially.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description (CID10-1-27) outlining the requirements for Blank Collar Insignia for male and female personnel of the U. S. Border Patrol's Special Operations Group (SOG). This uniform specification details the design, material, and workmanship standards for the insignia. The insignia will consist of two parallel rectangular bars connected by two smaller bars, embroidered in black thread onto a MultiCam® ripstop fabric patch with a tan hook backing. Specific dimensions for the bars and patch are provided, along with color specifications (MultiCam® for the patch, black for embroidery, and tan for sewn thread), all in accordance with MIL-DTL-14651A unless otherwise specified. The insignia will be available in one size and packaged two per unit, with manufacturers required to certify adherence to these characteristics and quality standards.

This U.S. Customs and Border Protection commercial item description outlines the requirements for Two Bar Collar Insignia rank to be worn by U.S. Border Patrol Special Operations Group personnel. The insignia consists of two parallel rectangular bars connected by smaller bars, embroidered in black thread on a MultiCam® ripstop fabric patch with a tan hook backing. The overall dimensions of the insignia are ¾” tall and ¾” wide, with specific measurements for the bars and a 1-¾” wide x 1-¼” tall patch. The insignia must be free of defects and available in one size, packaged two per unit. Manufacturers must certify that the product meets the specified salient and material characteristics, conforming to MIL-DTL-14651A standards and their own quality assurance practices.

This document outlines the U.S. Customs and Border Protection's uniform specification for Oak Leaf Collar Insignia ranks, intended for male and female personnel within the U.S. Border Patrol (USBP) Special Operations Group (SOG) and the Office of Field Operations (OFO) Special Response Team (SRT). The insignia is an embroidered oak leaf on a rectangular cloth patch with hook backing, available in black, gold, or brown oak leaf colors. Specifications include dimensions (¾” x 7/8” oak leaf, 1-¾” x 1-¼” patch), material (ripstop fabric per MIL-DTL-14651A), and color variations for USBP SOG (MultiCam® Black or Brown patch with tan hook backing and thread) and OFO SRT (Arid MultiCam® Gold or Brown patch with Green Olive hook backing and thread). The insignia must be free of defects and certified by the manufacturer to meet the described characteristics and commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specifications for Eagle Collar Insignia with hook backing, to be worn by personnel in the U.S. Border Patrol (USBP) Special Operations Group (SOG) and the Office of Field Operations (OFO) Special Response Team (SRT). The insignia features an embroidered eagle clutching arrows on a cloth patch. Key characteristics include specific dimensions for the eagle (31/32” wide x ½” tall) and the rectangular patch (1-¾” wide x 1-¼” tall). The USBP SOG eagle is embroidered in black thread on a MultiCam® patch with a tan hook backing, while the OFO SRT eagle is embroidered in brown thread on an Arid MultiCam® patch with a Green Olive hook backing. All materials and colors must conform to MIL-DTL-14651A standards. The insignia must be free of defects and come in packages of two, with one eagle facing each direction. Manufacturers are required to certify that their product meets these specifications and commercial quality standards.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for One Star Collar Insignia with hook backing for both male and female personnel in the U.S. Border Patrol (USBP) Special Operations Group (SOG) and the Office of Field Operations (OFO) Special Response Team (SRT). The insignia features a single embroidered star on a rectangular cloth patch with hook backing. Key specifications include different star diameters (¾” for USBP SOG and ½” for OFO SRT), embroidery thread colors (black for USBP SOG and brown for OFO SRT), patch and sewn thread colors (MultiCam® and tan for USBP SOG; Arid MultiCam® and Green Olive for OFO SRT), and hook backing colors (tan for USBP SOG and Green Olive for OFO SRT). All materials must conform to MIL-DTL 14651A, and the insignia must be free of defects and available in packages of two. Manufacturers must certify that their product meets these salient characteristics and commercial marketplace standards.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specification for the Two Star Collar Insignia rank, specifically for male and female personnel of the U. S. Border Patrol Special Operations Group (SOG). The insignia features two black embroidered stars, each ¾” in diameter, aligned point-to-point on a 1-¾” wide x 1-¼” tall Multi Cam® ripstop fabric patch with a tan hook backing. The patch is finished with a turned edge and sewn with tan thread. It must meet MIL-DTL 14651A standards and be free of defects. Manufacturers must certify that the product conforms to these specifications and their own quality assurance practices, with the Government reserving the right to verify conformance.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specification CID10-1-33 for a Three Star Collar Insignia. This insignia, intended for male and female personnel of the USBP Special Operations Group (SOG), features three black embroidered stars, each 3/4" in diameter, aligned point-to-point across a 2-1/2" wide x 1-1/4" tall Multi Cam® ripstop fabric patch. The patch has a tan hook backing and is finished with a turned edge sewn with tan thread. The insignia must comply with MIL-DTL 14651A and be free of defects. Manufacturers must certify that the product meets these specifications and commercial marketplace standards, with the government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description (CID10-1-34) for Four Star Collar Insignia with hook backing. These insignias are specifically for male and female personnel within the USBP Special Operations Group (SOG). The insignia will feature four stars, each 9/16” in diameter, embroidered in black thread on a 2-1/2” wide x 1-1/4” tall MultiCam® ripstop fabric patch. The overall embroidery will measure 2-1/4” wide x 9/16” tall, with stars aligned point-to-point across the patch's width. The patch will have a green hook backing, a turned edge sewn with tan thread, and will be available in packages of four. All materials and colors must conform to MIL-DTL-14651A, and the manufacturer must certify the product meets all specified characteristics and workmanship standards, including being free of defects. The government reserves the right to request proof of conformance before delivery.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for Journeyman Jacket and Collar Insignia for male and female personnel in the Office of Field Operations (OFO). The insignia is a rectangular metal bar with two mounting prongs and a butterfly clutch. The jacket insignia measures 1-1/8” tall by 3/8” wide, while the collar insignia is 3/4” tall by 1/4” wide. Both are silver bars with two blue rectangles and a 1/32” silver trim. The materials must be fade and chip resistant, with specific Pantone colors for blue (8183C) and polished nickel silver. Manufacturers must certify that the product meets the specified characteristics and conforms to their own quality assurance practices, being the same product sold commercially. This document highlights a federal procurement specification for uniform items.

This document outlines the U.S. Customs and Border Protection's (CBP) Office of Field Operations (OFO) specifications for the One Bar Jacket Insignia. This commercial item description details requirements for a silver, metal, rectangular bar insignia with two mounting prongs and butterfly clutch fasteners, designed for both male and female personnel. Key characteristics include dimensions of 1-1/8” tall and 3/8” wide, a polished nickel-silver finish that is fade and chip resistant, and construction from red brass. The insignia must conform to MIL-DTL 14639/43A-1 unless otherwise specified, be free of defects, and be packaged two per unit. Manufacturers are required to certify that the product meets all specified salient characteristics and quality assurance practices, with the Government reserving the right to verify conformance.

The U.S. Customs and Border Protection, Office of Field Operations (OFO), has issued a commercial item description (CID10-1-38 (a-b)) for Oak Leaf Jacket Insignia. This document outlines the requirements for both silver (CBPOFO-155) and gold (CBPOFO-154) insignias to be worn by male and female personnel. The insignia must be a 1” tall by 15/16” wide metal oak leaf made of red brass, available in polished nickel-silver or polished gold plate with a fade and chip-resistant finish. Each insignia requires two mounting prongs with butterfly clutch fasteners and must be packaged in pairs. Manufacturers are required to certify that the product meets the specified salient and material characteristics, including conformance to MIL-DTL 14639/45A-1 and /45A-3, and is free of defects. The government reserves the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Silver Eagle Jacket Insignia, designated for male and female personnel within the Office of Field Operations (OFO). The insignia is a metal eagle clutching arrows, ¾” tall and 1-½” wide, with a polished nickel-silver, fade and chip resistant finish. It features two mounting prongs, each secured by a butterfly clutch fastener. Made of red brass, the insignia must conform to MIL-DTL 14639/33C-1 unless otherwise specified. It is packaged two per set, with one eagle facing each direction, and is available in one size. Manufacturers must certify that the product meets these salient characteristics, their own specifications, and is commercially available, with the Government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection, Office of Field Operations (OFO), has released a uniform specification (CID10-1-40) for a Silver One Star Jacket Insignia. This commercial item description outlines the requirements for the insignia to be worn by both male and female OFO personnel. The insignia must be a 1-inch diameter metal single star, made of red brass with a polished nickel-silver, fade and chip resistant finish. It will feature two mounting prongs with butterfly clutch fasteners and must conform to MIL-DTL 14639/46A-1 unless otherwise specified. Manufacturers are required to certify that the product meets these salient characteristics and their own quality standards, ensuring it is the same product sold commercially. The government reserves the right to request proof of conformance before delivery. The insignia will be packaged two per package and available in one size only, free of defects.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a commercial item description (CID) for a Silver Two Star Jacket Insignia. This insignia is designed for both male and female OFO personnel. Key specifications include a design with two metal stars, 1 inch in diameter each, aligned point-to-center, and soldered onto a connecting bar. The overall insignia dimensions are 1 inch tall and 1-7/8 inches wide. It must be made of red brass with a polished nickel-silver finish that is fade and chip resistant. Each insignia will have two mounting prongs with butterfly clutch fasteners and will be packaged two per package. Manufacturers are required to certify that the product meets the salient characteristics outlined in the description and conforms to their own quality assurance practices, with the government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection Office of Field Operations (OFO) has issued a uniform specification, CID10-1-42, for a Silver Three Star Jacket Insignia. This document outlines the requirements for the insignia, which is to be worn by both male and female OFO personnel. The insignia must consist of three metal stars, each 1 inch in diameter, aligned point to center and soldered to a connecting bar. It will be 1 inch tall and 2-15/16 inches wide, made of red brass with a polished nickel-silver finish that is fade and chip resistant. Each insignia will have two mounting prongs with butterfly clutch fasteners. The product must conform to MIL-DTL 14639/48A-1 unless otherwise specified and be free of defects. Manufacturers must certify that their product meets these salient characteristics and quality assurance practices, ensuring it is the same product sold commercially. The insignia will be available in one size and packaged with two per package.

This U.S. Customs and Border Protection (CBP) document, CID10-1-43, outlines the uniform specifications for the Silver Four Star Jacket Insignia for male and female personnel within the Office of Field Operations (OFO). The insignia must consist of four metal stars, 1” in diameter each, aligned point to center, and soldered to a connecting bar. It will be 1” tall and 3-3/16” wide, made of red brass with a polished nickel-silver, fade and chip-resistant finish. Each insignia requires two mounting prongs with butterfly clutch fasteners and must be packaged two per package. Manufacturers are required to certify that the product meets the specified salient characteristics and conforms to their own quality assurance practices, with the Government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection, Office of Field Operations (OFO), has issued a uniform specification for Four Star Shoulder Board Insignia for both male and female personnel. The insignia, detailed in commercial item description CID10-1-44 (a-b), must adhere to MIL-DTL 14651A standards. Key characteristics include an isosceles trapezoid shape with specific dimensions for male and female versions, a 1/8” wide silver stripe, and four embroidered stars. Male stars are 1” in diameter, and female stars are 13/16”, both aligned point to center and top edge. The shoulder boards are made of cotton/polyester fabric with 100% polyester embroidery thread. Colors are Navy (Pantone 19-4013TC) for the epaulet and Silver (Pantone 14-5002TC) for the embroidery. They must be free of defects and packaged two per set. Manufacturers must certify conformance to these specifications.

The U.S. Customs and Border Protection's Office of Field Operations (OFO) has issued a uniform specification (CID10-1-45 (a-b)) for Three Star Shoulder Board Insignia for both male and female personnel. This commercial item description outlines the requirements for the shoulder boards, specifying their style, salient characteristics, material, colors, sizing, and workmanship. Key details include the isosceles trapezoid shape, specific dimensions for male and female versions, the placement of a 1/8" silver stripe, and the embroidery of three stars (1" diameter for male, 13/16" for female). The shoulder boards are to be made of cotton/polyester fabric with 100% polyester thread embroidery, in Navy (Pantone 19-4013TC) for the epaulet and Silver (Pantone 14-5002TC) for the embroidery. Manufacturers must certify that the product meets these specifications and is free from defects, conforming to commercial marketplace standards.

The U.S. Customs and Border Protection's Office of Field Operations (OFO) has issued a commercial item description for Two Star Shoulder Board Insignia for male and female personnel. These shoulder boards, made of cotton/polyester fabric with 100% polyester embroidery, are navy with silver embroidery. Key specifications include isosceles trapezoid shapes (male: 4-1/4” x 2” x 2-1/4”; female: 3-1/4” x 2” x 2-1/4”), a 1/8” silver stripe, and two embroidered stars. Star placement and diameter vary by gender (male: 5/8” above stripe, 1” diameter; female: 5/16” above stripe, 15/16” diameter), adhering to MIL-DTL 14651A. The insignia must be defect-free, sewn for epaulet mounting, and packaged in pairs. Manufacturers must certify conformance to specifications and commercial quality standards.

The U.S. Customs and Border Protection Office of Field Operations (OFO) requires One Star Shoulder Board Insignia for male and female personnel. This commercial item description outlines the specific requirements for these shoulder boards, which include an isosceles trapezoid shape, a 1/8” wide silver stripe, and a single embroidered star. The shoulder boards must conform to MIL-DTL 14651A standards, with specific sizing for male and female personnel. Material characteristics specify cotton/polyester fabric for the boards and 100% polyester thread for embroidery in Navy and Silver colors, respectively. Manufacturers must certify that their product meets these salient characteristics and quality standards, with the government reserving the right to verify conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Chief Manager Shoulder Board Insignia, designed for both male and female personnel within the Office of Field Operations (OFO). The insignia is an isosceles trapezoid shoulder board featuring an eagle clutching arrows above a silver stripe. Key characteristics include specific male (4-1/4” long) and female (3-1/4” long) sizing, a 1/8” wide silver stripe embroidered ¼” from the bottom edge, and a 1” wide by ¾” tall embroidered eagle positioned 5/8” above the stripe. The shoulder boards are made of cotton/polyester fabric with 100% polyester embroidery thread, in navy (Pantone 19-4013TC) for the epaulet and silver (Pantone 14-5002TC) for the embroidery. They are packaged in pairs, with one eagle facing left and the other right, and must be free of defects. Manufacturers must certify conformance to these specifications, with the Government reserving the right to request proof.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for Supervisor Shoulder Board Insignia ranks for male and female Office of Field Operations (OFO) personnel. These shoulder boards feature a gold Oak Leaf above a silver stripe on a navy background. Key characteristics include specific male and female sizing (4-1/4” x 2” x 2-1/4” for male; 3-1/4” x 2” x 2-1/4” for female), a 1/8” silver stripe, and a 1” x 1-1/8” gold Oak Leaf. The insignia must adhere to MIL-DTL 14651A, be made of cotton/polyester fabric with 100% polyester embroidery, and be free of defects. Manufacturers must certify conformance to these specifications and commercial quality standards. The document includes Pantone color codes for the epaulet, gold, and silver embroidery, and specifies that the boards come two per package and are sewn for epaulet mounting.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Chief Shoulder Board Insignia rank, to be worn by male and female personnel within the Office of Field Operations (OFO). The specification details requirements for silver oak leaf shoulder boards, available in male and female sizing. Key characteristics include an isosceles trapezoid shape with specific dimensions for male (4-1/4” long by 2” wide at the top and 2-1/4” at the bottom) and female (3-1/4” long by 2” wide at the top and 2-1/4” at the bottom) personnel, a 1/8” wide silver stripe, and a 1” wide by 1-1/8” tall embroidered silver oak leaf. The materials specified are cotton/polyester fabric for the boards and 100% polyester thread for embroidery. Colors are Navy (Pantone 19-4013TC) for the epaulet and Silver (Pantone 14-5002TC) for the embroidery. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards.

This document outlines the U.S. Customs and Border Protection's (CBP) Uniform Specification for Journeyman Shoulder Board Insignia, intended for male and female personnel within the Office of Field Operations (OFO). The shoulder boards are isosceles trapezoids, with specific male and female sizing. They feature a 1/8-inch silver stripe embroidered 1/4 inch above the bottom edge, and a Journeyman symbol embroidered 5/8 inch above the stripe. The Journeyman symbol is a 7/16-inch by 1-3/16-inch rectangle with a 1/16-inch gold border, trisected into three 5/16-inch segments (two outer blue, one inner gold). The insignia is made from cotton/polyester fabric with 100% polyester embroidery thread, in specific Pantone colors for the epaulet (Navy), and embroidery (Silver, Gold, Blue). The back is sewn for epaulet mounting, and they are packaged in pairs. Manufacturers must certify that the product meets the specified salient characteristics and conforms to commercial marketplace standards.

This document outlines the U.S. Customs and Border Protection's uniform specification for GS-9/GS-11 Shoulder Board Insignia, intended for male and female personnel within the Office of Field Operations (OFO). The shoulder boards, designed as isosceles trapezoids (male: 4-1/4” x 2” x 2-1/4”; female: 3-1/4” x 2” x 2-1/4”), feature a 1/8” silver stripe embroidered ¼” above the bottom edge. They are made from cotton/polyester fabric with 100% polyester silver embroidery (Pantone 14-5002TC) on a navy epaulet (Pantone 19-4013TC). Each package contains two shoulder boards, designed for mounting onto an epaulet. Manufacturers must certify that the product meets these salient characteristics, conforming to their own standards and quality assurance practices, and is commercially available. The government reserves the right to request proof of conformance.

The U.S. Customs and Border Protection, Office of Field Operations (OFO), has issued a uniform specification for Trainee Shoulder Board Insignia for both male and female personnel. This commercial item description, CID10-1-53 (a-b), outlines the requirements for these shoulder boards, which are to be navy blue with a silver stripe. Key characteristics include an isosceles trapezoid shape, with specific dimensions for male (4-1/4” long by 2” wide at the top and 2-1/4” at the bottom) and female (3-1/4” long by 2” wide at the top and 2-1/4” at the bottom) sizes. The shoulder boards must be made of cotton/polyester fabric with 100% polyester embroidery thread, sewn on the back for epaulet mounting, and packaged in pairs. Manufacturers must certify that the product meets these salient characteristics, conforms to their own standards, and is sold commercially, with the Government reserving the right to verify conformance.

The U.S. Customs and Border Protection, Office of Field Operations (OFO), has issued a commercial item description for the one-bar Enforcement Shoulder Board Insignia for male and female personnel. The insignia, detailed in CBPOFO-137 (male) and CBPOFO-138 (female), must conform to MIL-DTL 14651A unless otherwise specified. Key characteristics include an isosceles trapezoid shape (male: 4-1/4” long, 2” top width, 2-1/4” bottom width; female: 3-1/4” long, 2” top width, 2-1/4” bottom width), a 1/8” wide silver stripe, and a 3/8” tall by 1” wide silver bar, both embroidered. The shoulder boards are made from cotton/polyester fabric with 100% polyester embroidery thread, in Navy (Pantone 19-4013TC) and Silver (Pantone 14-5002TC) colors, respectively. They must be free of defects and come in packages of two. Manufacturers are required to certify that products meet these specifications and conform to their own quality assurance practices, with the Government reserving the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Oak Leaf Collar Insignia rank, worn by male and female personnel of the Office of Field Operations (OFO). The insignia is an embroidered oak leaf on a cloth patch with a hook backing, available in grey or gold. Key characteristics include its MIL-DTL 14651A compliance, 3/4” x 7/8” oak leaf dimensions, and a 1-¾” x 1-¼” navy rectangular patch with a black hook backing and navy thread. The insignia is packaged in sets of four and must be free of defects. Manufacturers must certify that their product meets these specifications and commercial marketplace standards, with the government reserving the right to verify conformance.

This document, CID10-1-56, outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Eagle Collar Insignia rank with hook backing, to be worn by male and female personnel of the Office of Field Operations (OFO). The insignia is an eagle clutching arrows, embroidered in grey thread onto a navy cloth patch with a black hook backing. Key characteristics include specific dimensions for the eagle (1” wide x ½” tall) and the rectangular patch (1-¾” wide x 1-¼” tall), with the eagle's head oriented at the top. The patch is finished with a turned edge and sewn with navy thread. All materials and colors must conform to MIL-DTL 14651A standards, with specified Pantone numbers for the patch (Navy 19-4007TC), embroidery (Grey 18-0201TC), and sewn thread (Navy 19-5708TC). The insignia is available in one size and packaged as four sets, with eagles facing in each direction. Manufacturers must certify that the product meets all salient characteristics and conforms to their own quality assurance practices, with the Government reserving the right to request proof of conformance.

This document specifies the requirements for one-star to four-star collar insignia for the U.S. Customs and Border Protection, Office of Field Operations (OFO). These insignia are blue cloth patches with grey star embroidery and hook backing, designed for both male and female personnel. Key characteristics include star diameter, grey embroidery, specific star orientation, and patch dimensions. One- and two-star patches measure 1-¾” wide x 1-¼” tall, while three-star patches are 2-½” wide x 1-¼” tall, and four-star patches are 3-¼” wide x 1-¼” tall. All patches feature black hook backing, turned edges, and navy thread stitching. Materials and colors (Navy patch, Grey embroidery, Navy sewn thread) must conform to MIL-DTL 14651A standards. The document mandates defect-free workmanship and requires manufacturers to certify compliance with all salient characteristics and commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a commercial item description for a Trainee Collar Insignia. This document outlines the requirements for a navy cloth patch with a hook backing, to be worn by both male and female OFO personnel. Key specifications include a rectangular shape of 1-¾” wide by 1-¼” tall, a black hook backing, and navy thread for the turned edge finish. The insignia must conform to MIL-DTL 14651A standards for material and color (Pantone 19-4007TC for the patch and Pantone 19-5708TC for the thread). It will be available in one size, packaged in sets of four pairs. Manufacturers must certify that the product meets these salient characteristics and their own quality assurance practices. The document includes sign-offs from various CBP personnel, confirming its accuracy and consistency.

This U.S. Customs and Border Protection (CBP) document, CID10-1-59, specifies the requirements for the Journeyman Collar Insignia for the Office of Field Operations (OFO) personnel. The insignia is a navy cloth patch with grey embroidery of the Journeyman rank symbol and a hook backing. Key characteristics include a 1-¾” wide x 1-¼” tall rectangular patch, a centered 3/8” tall by 1” wide Journeyman symbol with a 1/16” grey border and a 5/16” wide grey embroidery section, and 1/4” wide navy fabric outer segments. The patch must have a black hook backing, a turned edge sewn with navy thread, and be packaged in four sets of two. Materials and colors must conform to MIL-DTL-14651A, with specific Pantone numbers for navy patch (19-4007TC), grey embroidery (18-0201TC), and navy thread (19-5708TC). The insignia is available in one size and must be free of defects. Manufacturers must certify conformance to these specifications and their own quality practices, with the Government reserving the right to require proof.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for male and female Air and Marine Operations (AMO) personnel: the Class One Dress Pants. These sheriff-style pants, designated CBPOAM-008, Tan, are made from a 75% Polyester/25% Wool twill fabric (7.0 oz.) and are machine washable and resistant to fading and shrinking. Key features include a plain front with reinforced panels, quarter-top front pockets, a watch pocket, two back pockets (one with button closure), a crush-proof hook and eye front closure, a brass zipper fly, a 2-inch waistband with silicone grip, and ¾-inch belt loops. A distinguishing characteristic is the 1-inch wide brown stripe sewn on the outseam of each leg, along with a permanent silicone crease. The pants must match specific Pantone tan and brown color chips and are available in male waist sizes from 26 to 56 inches (even) and 29 to 37 inches (odd), with various inseam lengths (Short, Regular, Long, Hemmed, Unhemmed). Manufacturers must certify that the product meets these salient characteristics, conforming to commercial standards and being free of defects.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for female Class One Dress Pants for Air and Marine Operations (AMO) personnel. The pants are a sheriff-style, tan uniform with specific design features including quarter-top front pockets, two rear pockets with button closures, a plain front with reinforced panel, and a pleat on each side. Key characteristics include a crush-proof hook and eye front closure, a brass zipper fly, a 1½-inch waistband with an additional 1½-inch expansion on each side, ¾-inch wide belt loops, and a 1-inch wide brown stripe sewn on the outseam of each leg. The pants must also feature a permanent silicone crease, be fade and shrink resistant, and machine washable. The fabric is specified as 75% Polyester/25% Wool twill, 7.0 oz., in Tan (Pantone 16-1107TC) with a Brown (Pantone 19-0712TC) stripe, and must meet specific colorfastness and weight requirements. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specification for male and female dress pants. It details requirements for sheriff-style pants, including design features such as straight front pockets, two rear flap pockets with hidden button closures, a watch pocket, and a 2-inch waistband with a silicone shirt grip. Key characteristics include stain, wrinkle, fade, and shrink resistance, along with a 1-inch navy stripe on each outseam and a permanent silicone crease. The pants are available in 55/45 polyester/wool (dry clean only) and 75/25 polyester/wool (machine washable) blends. Fabric specifications include a 7.0 oz./square yard 75% Polyester / 25% Wool twill in green (Pantone 19-0414 TC) with a navy stripe (Pantone 19-4023TC), meeting specific colorfastness standards. Sizing is provided for male waists (28-58 inches) and female sizes (4-24), with options for different lengths and made-to-measure sizing. Manufacturers must certify that products meet these specifications and conform to commercial quality standards.

This U.S. Customs and Border Protection (CBP) uniform specification outlines requirements for male Class 2 Dress Pants for the Office of Field Operations (OFO). The document details style, salient characteristics, fabric compositions (75% Polyester/25% Wool for CBPOFO-266 and 100% Polyester for CBPOFO-508), and sizing. Key features include sheriff-style design, specific pocket configurations, a black outseam stripe, and a permanent silicone crease. Fabric must meet standards for weight, color, and colorfastness. The pants must be fade/shrink resistant, machine washable, and free of defects, with certification required from manufacturers. This specification ensures uniformity and quality for OFO personnel's dress attire.

This document outlines the uniform specifications for Class 2 Dress Pants for female personnel in the U.S. Customs and Border Protection's Office of Field Operations (OFO). It details the style, salient characteristics, fabric requirements, and sizing for two approved models: CBPOFO-267 (Polyester/Wool) and CBPOFO-509 (100% Polyester, a wool allergy alternative). Key features include a sheriff-style design, specific pocket configurations, a crush-proof hook and eye closure, a brass zipper fly, ¾” wide belt loops, a 1” wide black stripe on the outseam, permanent silicone creases, and fade/shrink resistance. Fabric characteristics, color specifications (Navy and black stripe), and colorfastness test methods are provided. Sizing varies by model, with CBPOFO-267 offering a wider range. The document also specifies workmanship standards, requiring certification from the manufacturer that products meet these specifications and are commercially available. This update discontinues older models and introduces the two current versions.

This U.S. Customs and Border Protection commercial item description (CID2-1-06) outlines the requirements for Class 2 Maternity Dress Pants for female Office of Field Operations (OFO) personnel. These navy, sheriff-style pants feature quarter-top front pockets, two rear button-closure pockets, and a black four-way stretch modesty panel with an elastic waistband. Key characteristics include a 2½-inch waistband with a silicone shirt grip, a 1-inch black stripe on each outseam, permanent silicone leg creases, and fade/shrink resistance. The fabric is a 7.0 oz. 75% Polyester / 25% Wool twill, tested for weight, colorfastness (laundering, light, crocking, perspiration), and color matching to Pantone specifications. Available in female sizes 4-24 Regular, the pants must be free of defects and seamed with matching polyester thread. Manufacturers must certify conformance to salient characteristics, their own specifications, and commercial marketplace standards, with the government reserving the right to verify compliance.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a commercial item description (CID) for unisex Honor Guard Pants. This document, CBPOAM-432, specifies detailed requirements for the design, materials, and construction of these dress pants. Key features include a plain front, reinforced paneling, multiple pockets with specific closures and dimensions, a flexible waistband with shirt grip, and a 1-inch brown stripe on the outseam. The pants must be made from a 75% polyester / 25% wool gabardine blend, be fade and shrink resistant, and free of PFAS. Material characteristics, color matching (Silver Tan with a Brown stripe), sizing, and detailed construction for the waistband, fly, pockets, and seams are thoroughly outlined. The CID also includes requirements for permanent labels, matching thread, professional finishing, and certification from the manufacturer that the product meets all specified salient characteristics and commercial marketplace standards.

This document, CID2-2-09, outlines the U.S. Customs and Border Protection (CBP) Air & Marine Operations (AMO) uniform specification for flame-resistant, unisex, tan soft shell flight pants (CBPOAM-358). These pants are designed for male and female AMO personnel and must be constructed from breathable, machine-washable, flame-resistant material, meeting specific fabric characteristics and test methods for weight, color, and colorfastness. Key features include a plain front, front button closure, zippered fly, gusseted crotch, seven belt loops, articulated knees, two front notched pockets, two low-profile zippered cargo pockets with bellows and cover flaps (the right one having a vertical knife pocket), and two rear hip pockets with cover flaps and hook and loop closures. The fabric must be flame resistant as per NFPA 1975 standards, with specific requirements for char length, afterflame, melting/dripping, and thermal shrinkage. The pants will be available in men's short, regular, and long sizes (XS-3XL). Manufacturers must certify that the product meets these specifications, standards, and quality assurance practices, ensuring it is the same as commercially sold items, with the government reserving the right to verify conformance.

This document outlines the uniform specification for U.S. Customs and Border Protection's (CBP) Maternity Pants, Khaki, for authorized female personnel in Air and Marine Operations, Office of Field Operations, and U.S. Border Patrol. The pants feature an expandable elastic waistband, an elasticized front panel with a mock zipper, two rear internal pockets, and two side cargo pockets with hook and loop closures, internal web loops, and pencil pockets. Key fabric characteristics include a 2x2 micro ripstop blend of 65% polyester and 35% cotton for the base material, and a four-way stretch knit of 78% polyester and 22% elastomeric fiber for the stretch panel, all with a durable water repellent finish. The khaki pants must meet specific fabric requirements for weight, colorfastness to laundering, light, crocking, and perspiration. Available in sizes 2-24, the pants must be free of defects, and manufacturers must certify compliance with these specifications.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for khaki maternity pants. These pants are designed for authorized female personnel in Air and Marine Operations (AMO), Office of Field Operations (OFO), and U.S. Border Patrol (USBP). The specification details the style, including an expandable elastic waistband, elasticized front panel, mock zipper, and various pockets (rear internal, side cargo with flap covers, internal web loops, and pencil pockets). Key characteristics include a cross articulation seam, gusseted crotch, and triple-stitched side seams. The fabric must be PFAS-free, a 6.4 oz/yd² micro ripstop blend of 65% polyester and 35% cotton for the base material, with a four-way stretch knit of 78% polyester and 22% elastomeric fiber for the stretch panel. The pants are khaki, machine washable with a durable water repellent finish, and meet specific fabric requirements for weight, colorfastness, and sizing (waist 2-24, inseam 24”-35”). Manufacturers must certify adherence to these specifications, with the government reserving the right to verify conformance. The document also includes a revision history and approval signatures.

This U.S. Customs and Border Protection (CBP) document specifies requirements for flame-resistant, two-piece flight suit pants for male and female Air and Marine Operations (AMO) personnel. The pants must be made from a durable ripstop fabric like Nomex® and Kevlar® blend, meeting specific colorfastness and flame resistance standards (NFPA 1975:3.3.9, ASTM D 6413). Key features include seven belt loops, articulated knees, dual-entry secure cargo pockets, secure calf pockets, leg zippers, a custom knife pocket, and a 3-point attachment system. The document details fabric characteristics, flame resistance testing criteria, available sizing (XS-3XL in short, regular, and long), and workmanship standards, ensuring freedom from defects. Manufacturers must certify compliance with all salient characteristics, with the government reserving the right to request proof before delivery. This document ensures AMO personnel have high-quality, protective flight attire.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description for "PANTS, BICYCLE PATROL, GREEN" (CBPOBP-375, Unisex). This document outlines the requirements for bicycle patrol pants to be worn by both male and female USBP personnel. The pants must be made of Supplex® (or equivalent) nylon with a durable water repellent (DWR) finish, featuring an elastic waistband, zipper fly, snap closure, and drawcord adjuster. Key characteristics include two slashed hand pockets, two radio frequency ID card pockets with hook and loop closures, one pen pocket with two pen ports, vented knees, tapered legs, and zippered cuffs. The fabric must be 100% nylon, machine washable, and treated for improved water repellency and stain resistance. The pants will be available in unisex sizes from XS to 5XL in regular and long lengths, with specific waist and inseam measurements provided. Manufacturers must certify that the product meets these salient characteristics and conforms to their commercial marketplace offerings.

The U.S. Customs and Border Protection (USBP) has issued a uniform specification (CBPOBP-376) for unisex Bicycle Patrol Shorts. This document outlines the requirements for shorts to be worn by male and female U.S. Border Patrol personnel. The shorts must be made from Supplex® (or equivalent) nylon with a durable water repellent (DWR) finish, featuring an elasticized waistband, zipper fly, snap closure, and drawcord adjuster. Key characteristics include two slashed hand pockets, two radio frequency ID card pockets with hook & loop closures, one pen pocket, and two back pockets with zipper closures. They must be machine washable and available in unisex sizes XS–5XL. The manufacturer is required to certify that the product meets these specifications and commercial marketplace standards, with the government reserving the right to verify conformance.

This document outlines the U.S. Customs and Border Protection's uniform specification for Rough Duty Uniform (RDU) Pants for U.S. Border Patrol personnel. It details requirements for male and female sizing, made-to-measure options, and olive drab color. Key features include multiple pockets, reinforced knees, a gusseted crotch, and a button closure waistband with a zipper fly. The pants are made from a 5.8 oz/yd2, 65% polyester/35% cotton stretch ripstop fabric, with pocket inserts of 6.5 oz/yd2, 92% nylon/8% spandex. Both fabrics must meet specific test methods for weight, color, dimensional stability, and colorfastness. The document also specifies sizing requirements for waist and inseam, workmanship standards, and requires manufacturer certification of adherence to commercial marketplace standards.

The U.S. Customs and Border Protection, Office of Field Operations (OFO), has issued a uniform specification for men's and women's Rough Duty Uniform (RDU) Pants. These pants, available in standard and made-to-measure sizing, are navy blue and must match the OFO RDU Shirt. Key features include multiple pockets (notched slant, cargo with hook-and-loop closure, flashlight/knife, and dual welt back pockets), a button closure waistband with zipper fly, gusseted crotch, shirt gripper, reinforced knees, and seven belt loops. The fabric is a 5.8 oz/yd² 65% polyester/35% cotton stretch ripstop for the main material and a 6.5 oz/yd² 92% nylon/8% spandex stretch for pocket inserts, both machine washable. Manufacturers must certify that the product meets salient characteristics and commercial marketplace standards, with the government reserving the right to request proof of conformance.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specification for unisex tactical pants, specifically model CBPOBP-053 (Camouflage), for the Special Operations Group (SOG) of the U.S. Border Patrol and the Special Response Team (SRT) of the Office of Field Operations. The pants feature a plain front, multiple pockets including cargo and utility pockets, and are designed for use with removable knee pads. Key characteristics include a gusseted crotch, reinforced knees, various hook and loop adjustments, a low-profile padded waistband, and specialized pockets for items like water bottles and knives. The fabric is a 50% nylon/50% cotton, 6.5 oz. rip-stop with Durable Water Repellent (DWR) treatment, meeting specific test methods for weight and colorfastness. Sizing ranges from 28 to 46 inches in waist, across four lengths. The document also details workmanship standards and requires manufacturer certification of product conformance to specifications and commercial marketplace standards. This specification ensures a durable and functional uniform item for specialized CBP personnel.

This document outlines the uniform specifications for tactical pants for U.S. Customs and Border Protection's Office of Field Operations (OFO) Special Response Team (SRT) and Office of Professional Responsibility (OPR) personnel. It details requirements for navy (CBPCBP-371) and camouflage (CBPOFO-502) unisex tactical pants, including style, salient characteristics, fabric composition, sizing, and workmanship. Key features include an adjustable waistband, multiple pockets with various closures, a gusseted crotch, side seam panels, and kneepad inserts. The fabric is a 5.4 oz/yd2, 57% nylon/43% cotton blend, with specific stretch panel inserts depending on the pant type. The pants must be PFAS-free and meet specified fabric requirements. Sizing varies by color, and manufacturers must certify compliance with all characteristics. This specification ensures uniformity and functionality for critical federal government personnel.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for tactical stretch pants for male and female personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The pants, designated CBPCBP-052 (male) and CBPCBP-425 (female), feature a plain front, multiple pockets, articulated knees, and a stretch woven waistband. The fabric is a 5.9 oz/yd² 42/32/26% stretch polyester/polyester/cotton blend, machine washable, and must meet specific colorfastness and weight standards. The color is Desert Tan, with sizing available for male waists 28-50 and inseams 30-36, and female sizes 00-18. Manufacturers must certify that the product meets salient characteristics and conforms to commercial marketplace standards. The document includes revision history, discontinuing older models, and several approvals from CBP liaisons and managers, ensuring the uniform item's technical attributes are accurately documented.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification (CID2-3-06) for men's tactical pants in tan, to be worn by personnel from the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The pants, identified as CBPCBP-201 (replacing the discontinued CBPCBP-200), must feature a plain front with multiple pockets including two front notched slant pockets, two rear back pockets, and two low-profile cargo pockets on the mid-thigh. Key characteristics include a zipper closure with a metal button, a stretch waistband for up to 2 inches of expansion, eight 7/8-inch belt loops, a hidden tourniquet routing system, reinforced articulated knees for pad inserts, and hook-and-loop closures on cargo and drop-in pockets. The fabric must be a 65% polyester/35% cotton, 5.8 oz/yd² mini ripstop stretch material with a Durable Water Repellent (DWR) treatment. It must be machine washable and meet specific requirements for weight, color (Desert Tan – Pantone#17-115 TCX), dimensional stability, and colorfastness. Sizing ranges from waist 28-54 and inseam 30-36. Manufacturers are required to certify that the product meets these specifications and conforms to commercial marketplace standards, with the government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification (CID2-3-07) for women's tactical pants, superseding item CBPCBP-002 with CBPCBP-217. These pants are for female personnel in the U.S. Border Patrol, Office of Field Operations, and Air & Marine Operations. The pants must be tan (Pantone#17-115 TCX) and feature a plain front, two front slant pockets, two rear back pockets, two low-profile cargo pockets with flap covers on the mid-thigh, and a hidden tourniquet routing system. The fabric must be a 65% polyester/35% cotton, 5.8 oz/yd² mini ripstop stretch fabric with a Durable Water Repellent (DWR) treatment. It must meet specific requirements for weight, colorfastness, and dimensional stability. Available in female waist sizes 0-18 and inseams 30-36, the pants must be free of defects and seamed with matching polyester thread. Manufacturers must certify that the product meets these specifications and conforms to commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) document specifies requirements for unisex tactical shorts for the U.S. Border Patrol, Office of Field Operations, and Air and Marine Operations personnel. The shorts feature a plain front, multiple pockets including cargo pockets with hook and loop closures, a stretch waistband, zipper fly, gusseted crotch, seven belt loops, and a Combat Application Tourniquet (CAT) under-belt routing system. Made from a 5.8 oz/yd2 65% polyester/35% cotton mini ripstop woven fabric, they are available in Desert Tan, Olive Drab, and Navy, in waist sizes 28-54. The fabric must meet specific test methods for weight, color, dimensional stability, and colorfastness. Manufacturers must certify that the product conforms to the stated characteristics and their own quality standards, being the same product sold commercially. The document also notes updates to product codes and colors as of March 2024.

The U.S. Customs and Border Protection (CBP) Air & Marine Operations (AMO) has issued a commercial item description (CID) for Flame Resistant (FR) Tactical Pants. These unisex Desert Tan pants are designed for authorized male and female AMO personnel and must be compatible with a two-piece flight shirt. Key features include a plain front, multiple pockets (slant, cargo with zippered and flap closures, rear hip with hook and loop, and secure calf), a button-closure waistband with zipper fly, adjustable knee pad pockets, hook and loop ankle cuffs, a gusseted crotch, articulated knees, and seven 2 ¼” belt loops. The pants must be made from 100% flame-resistant meta-aramid fabric (e.g., Nomex®, Sigma 4 Star®) weighing 6.0 oz./square yard, machine washable, and exhibit specific colorfastness properties. The fabric must meet rigorous flame resistance standards, including char length, afterflame, and resistance to melting or dripping, with thermal shrinkage not exceeding 10 percent. Available in unisex sizes XS–XXXL in short, regular, and long lengths, the pants must be free of defects. Manufacturers must certify conformance to the salient characteristics, their own specifications, and commercial marketplace standards, with the government reserving the right to verify compliance.

This U.S. Customs and Border Protection uniform specification (CID2-4-01 (a-b)) outlines the requirements for lightweight, unisex base layer pants for personnel in the Office of Field Operations (OFO) and U.S. Border Patrol (USBP). The pants, available in black (CBPCBP-064) and green (CBPOBP-122), must have a relaxed fit, elastic waistband, front fly, and finished ankle cuffs. Key characteristics include moisture-wicking, fast-drying, breathable, anti-microbial protection, and flat seam construction. Made from 100% polyester 4.0 oz. fabric, they must be machine washable and meet specific test methods for weight, colorfastness, and resistance to laundering, light, crocking, and perspiration. Available in sizes Extra-Small to 2-Extra Large, the pants must be free of defects, with manufacturers certifying conformance to specified characteristics and commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for heavyweight base layer pants for male and female personnel in the Office of Field Operations (OFO) and U.S. Border Patrol (USBP). These pants feature an elastic waistband, contoured fit, and a front fly opening for the male style, with one green male USBP variant discontinued. Key characteristics include moisture-wicking, fast-drying, breathable, anti-microbial protection, flat seam construction, and finished ankle cuffs. The fabric is a PFAS-free blend of 90% polyester and 10% elastomeric fiber, weighing 8.5 oz., with a fleece interior and technical exterior. The document details specific test methods for fabric characteristics like weight, color, and colorfastness. The pants are available in various men's and women's sizes, must be free of defects, and require manufacturer certification of adherence to these specifications and commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) Air & Marine Operations (AMO) has issued a commercial item description (CID) for Flame Resistant (FR) Base Layer Pants. These unisex pants, designated CBPOAM-372, are for male and female AMO personnel and must be black. Key requirements include construction from 100% flame-resistant meta-aramid fabric (like Nomex®), moisture-wicking properties, four-way stretch, an elastic waistband, a front fly, and a short rise with longer leg length. The fabric must meet specific flame resistance standards (ASTM D 6413/F2302), including an average char length of no more than 6 inches and an average afterflame of no more than 2.0 seconds, without melting or dripping. The pants must also be machine washable and meet colorfastness requirements. Sizing will range from Extra-Small to 3-Extra Large for men. Manufacturers must certify that the product meets these salient characteristics and conforms to their own quality assurance practices, ensuring it is a commercially available item free from defects.

This document, CID3-1-01, outlines the uniform specifications for a flame-resistant flight jacket for U.S. Customs and Border Protection Air and Marine Operations (AMO) personnel. The jacket is a waist-length, black, unisex garment made from 100% flame-resistant meta-aramid fabric (e.g., Nomex®). Key features include a pleated action back, 2” collar, full-length front zipper with wind flap, two front pockets, a zippered sleeve pocket, and knit cuffs and waistband. The fabric must meet NFPA 1975 flame resistance standards, including specific char length, afterflame, and thermal shrinkage requirements, ensuring it does not melt or drip. The jacket requires specific official emblems and customizations, such as the Black and Gray Air and Marine Round Agency emblem on the left sleeve, the Black and Gray CBP keystone on the right sleeve, a Black and Gold AMO Federal Agent badge on the upper left chest, and a loop tape for nameplates on the upper right front. It will be available in sizes SM to 4XL. Manufacturers must certify that the product meets these specifications and commercial marketplace standards. The document also includes an update log and approval signatures, confirming its accuracy and consistency with other specifications.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specifications for an Insulated Soft-Shell Jacket for personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The jacket features a full front zipper, water and wind resistance, a soft brushed fleece lining, a stand-up collar, and multiple pockets. It is made from an 85% nylon, 15% spandex 4-way stretch softshell material. The document details specific emblem and customization requirements for AMO, USBP, OFO, and a CBP Seal version, including emblem types, placement, and loop tape dimensions for various attachments. Color options include Black for AMO, OFO, and CBP Seal versions, and Olive Drab Green for USBP. Sizing is unisex, with variations in length and range depending on the specific operational unit. The jacket must be free of defects, and manufacturers are required to certify that the product meets the described characteristics and quality standards.

This U.S. Customs and Border Protection (CBP) document, CID3-1-04(a-f), outlines the uniform specifications for a black leather bomber jacket for male and female personnel across Air and Marine Operations (AMO), U.S. Border Patrol (USBP), and the Office of Field Operations (OFO). Key features include 100% cowhide leather, a full-length brass zipper, bi-swing back, snap-closure collar, and various pockets. Specific emblems are detailed for OFO jackets (CBPOFO-040 and CBPOFO-041). The document also specifies sizing charts for each operational group and mandates that the material be PFAS-free. Manufacturers must certify that the product meets salient characteristics and commercial marketplace standards. This specification ensures uniformity and quality for official CBP apparel.

This document outlines the uniform specifications for Raid and Identification Jackets for U.S. Customs and Border Protection personnel, specifically for the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Office of Professional Responsibility (OPR). The jackets are black, windbreaker-style, made of waterproof, breathable 2-layer polyester with a nylon lining, and feature multiple pockets, a full-front zipper, and elastic cuffs and hem. Customizations include specific emblems and screen-printed text in yellow-gold on drop-down panels for each office (USBP, OFO, OPR), with Air and Marine Operations (AMO) being discontinued. Jackets are available in unisex sizes XS to 4XL, and must be free of defects. Manufacturers must certify that the product meets salient characteristics and commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) document outlines uniform specifications for insulated parka and outer shell jackets for the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO) personnel. The jackets are unisex, waterproof, breathable, and designed to integrate with an insulated soft-shell jacket. Key features include a front-opening hood with zipper closure, sealed seams, multiple pockets, and a 3-way adjustable, removable hood with a molding memory wire. The document details specific emblem and customization requirements for each agency, including placement of official emblems, badges, and name tapes. Material specifications call for 100% nylon with waterproof, breathable, and windproof coating. Colors vary by agency, with black for AMO, OFO, and CBP Seal models, and olive drab green for USBP. Sizing is unisex, ranging from XS to 4XL depending on length. Manufacturers must certify that products meet these salient characteristics and conform to commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for a unisex, insulated soft-shell jacket for Chaplaincy and Peer Support personnel. The jacket must be black, made from 85% nylon and 15% spandex with a soft brushed fleece interior, and feature a full front zipper, stand-up collar, right chest pocket, and two hand pockets. Specific emblems and customizations are detailed for both "PEER SUPPORT" (CBPCBP-443) and "CHAPLAIN" (CBPCBP-444) versions, including the CBP Seal and various loop tape attachments. Sizing ranges from XS to 4XL in short, regular, and long lengths. Manufacturers must certify that the product meets salient characteristics and conforms to commercial marketplace standards. The document also notes the discontinuation of older models (CBPCBP-343 and CBPCBP-344) and a history of revisions.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specification for a unisex black base jacket for Air and Marine Operations (AMO) personnel, specifically referencing model CBPCBP-375 (CBPCBP-326 is discontinued). The jacket must be water- and stain-resistant with a full front zipper, featuring a wind- and water-resistant shell, fleece insulation, stretch fleece side panels, an extended tail, two zippered handwarmer pockets, and a large internal chest security pocket. Material requirements include nylon water-repellent shell, 68-gram fleece insulation, polyester/elastomeric side panels, ripstop nylon lining, and a polyester suede collar lining. Notably, the jacket must be PFAS-free. It also specifies loop tape positioning for insignia attachment on the chest and arms. Available in sizes XSmall to 3XL, the jacket must be free of defects. Manufacturers are required to certify that the product meets the specified characteristics and conforms to their own quality standards, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a commercial item description (CID) for a unisex Honor Guard Jacket, designated CBPOAM-433. This document outlines detailed requirements for the jacket's style, salient characteristics, materials, and workmanship. Key features include a single-breasted, five-button front, specific pocket designs with CBP AMO insignia buttons, a stand-up collar, and various emblems on the sleeves. The jacket's outer shell must be a 75% polyester/25% wool gabardine blend in 'Silver Tan' (Pantone 16-3800 TCX Satellite) and be free of per- or polyfluoroalkyl substances (PFAS). The CID also specifies material characteristics for the lining, canvas, and pocketing, along with fabric testing requirements for weight, colorfastness, and resistance to light, laundering, crocking, and perspiration. The document emphasizes high-quality workmanship, requiring the jacket to be free of defects. Manufacturers must certify that the product meets all specified characteristics and conforms to commercial marketplace standards. This specification ensures uniformity and quality for Honor Guard personnel within AMO.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description (CID) for a two-piece Firearms Jacket, comprising an outer shell and an inner fleece, both red. This specification, CBPOBP-406, outlines requirements for male and female USBP personnel. The parka-style outer shell features an extended back hem, multiple pockets (including hidden utility and internal zippered), mic and camera loops, a detachable hood, and two-way side and front zippers with storm flaps. It is made of 100% polyester, durable water-repellent, PFAS-free fabric. The waist-length fleece inner jacket has overlays, chest and hand pockets, mic loops, and side zipper openings, made of anti-pilling polyester fleece with nylon 6 overlays, both PFAS-free. Both jackets require a loop fastener for the official USBP badge and come in sizes Extra Small to 4-Extra Large. The CID also specifies workmanship standards and requires manufacturers to certify product conformance to stated characteristics and commercial availability.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description for high-visibility, unisex safety vests for the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). These vests must meet ANSI 107-2004 Class 2, Level 2 requirements and be made of 100% polyester mesh jersey fabric in high-visibility yellow. Key features include two vertical and one horizontal 2-inch silver reflective striping on both front and back panels, an adjustable retention belt with hook and loop closure, and binding tape finished edges. The vests will be screen-printed with "CBP" in 2-inch black block letters vertically on the front and 3.5-inch black block letters horizontally on the back. Available in unisex sizes from Medium to 5-Extra Large, the vests must be free of defects. Manufacturers are required to certify that the product meets all specified characteristics and conforms to their own quality standards, reserving the government's right to verify conformance before delivery.

The U.S. Customs and Border Protection (USBP) Uniform Specification outlines the requirements for an insulated, unisex, green vest for Border Patrol personnel. The vest must be waist-length with synthetic insulation, featuring a rib-knit collar, curved front and rear drops, a full-length front zipper, two external zippered patch pockets, and two internal pockets. The material must be 100% nylon for the outer shell and 100% synthetic insulation, free of PFAS. It must be green (FED-STD 595C color chip 34083). Emblems include a subdued Border Patrol Agent badge on the left chest and a tape for a nameplate on the right. The vest is available in various short, regular, and long lengths (XS-4XL). Manufacturers must certify that the product meets these characteristics and conforms to commercial marketplace standards. This document, version 2.0, discontinues CBPOBP-040 and adds CBPOBP-207 with a subdued patch, effective June 2025.

This U.S. Customs and Border Protection (CBP) document, CID3-3-04 (a-c), outlines the uniform specifications for an insulated, unisex black vest for Office of Field Operations (OFO) personnel. The vest is hip-length, fleece-lined, and features a full-length dual-direction front zipper, multiple zippered pockets (hand, chest, internal chest), and an external pen pocket. Made from an 85% nylon/15% elastomeric fiber outer shell and 100% polyester fleece lining, it includes specific black loop material placements for emblems and customizations. Available in regular and long lengths across various sizes, the vest must be free of defects. Manufacturers must certify that the product meets these characteristics and conforms to their commercial marketplace standards. This document supersedes earlier versions, reflecting updates to item codes for the insulated vest.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for a unisex black shell rain jacket for personnel in U.S. Border Patrol, Office of Field Operations (OFO), and Air and Marine Operations (AMO). The jacket must be waterproof, windproof, breathable, and designed for mobility, featuring taped seams, a detachable hood, fleece-lined pockets, and various zippers for ventilation and access to tools. Customizations include specific loop patches on the chest. Emblems for AMO, OFO, and Agriculture Specialists, along with nametapes and the CBP Seal, are detailed for specific attachment points. The jacket material is a waterproof/breathable tri-laminate 100% ripstop nylon, available in black, sizes XSmall to 6XL. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards.

The U.S. Customs and Border Protection's Air and Marine Operations (OAM) has issued Uniform Specification CID3-4-10 for a unisex black rain shell pant. This document outlines the requirements for a waterproof, windproof, and breathable hard shell rain pant designed for mobility and comfort. Key features include a laminated shell with taped seams, a high-rise rear waistband with belt loops and adjustment straps, zippered fly with storm flap, various pockets with storm flaps and waterproof zippers, zippered thigh vents, articulated knees, and ankle-height zippers for easy donning over boots. The pants are made from 100% Polyester shell with 37.5® laminate or equivalent, are black, and available in unisex sizes Small through 3XL in regular and long lengths. Manufacturers must certify that the product meets these specifications and commercial marketplace standards.

The U.S. Customs and Border Protection (USBP) Uniform Specification CBPOBP-378 outlines the requirements for a unisex Green Rain System Jacket for U.S. Border Patrol personnel. This waist-length jacket features a waterproof-breathable outer shell and a removable, stand-alone insulated soft-shell jacket. Both components are OD Green and must be 100% nylon for the outer shell and 85% nylon/15% spandex for the liner. Key features include multiple pockets, a 3-way adjustable and removable hood with molding memory wire, and various official Border Patrol emblems and customization loops for names and patches. Sizing ranges from Extra Small to 4-Extra Large (Regular). Manufacturers must certify that the product meets these specifications, ensuring quality and conformity with commercial marketplace standards.

The U.S. Customs and Border Protection (USBP) Uniform Specification CID3-4-12 outlines the requirements for a unisex rain pant for U.S. Border Patrol personnel. The rain pant must be a waterproof, breathable, fully sealed shell, made from 3-layer nylon fabric, and colored OD Green. Key features include multi-directional stretch in the waist with a drawcord adjustment, a knee-to-knee running gusset, pass-through hand pockets with zipper closures, knee-to-hem zipper leg openings, double zipper side seams for venting, articulated knees, and ankle hook-and-loop closures. The pants will be available in unisex sizes Extra-Small through 4 Extra-Large, with a generous cut for layering. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards, with the government reserving the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for Windstopper Rain Pants for U.S. Border Patrol (USBP) personnel. The rain pants, available for both male (CBPOBP-820) and female (CBPOBP-827) agents, must be windproof, waterproof, and breathable. Key features include a multi-directional stretch waist, five belt loops, a front fly zipper with flap and snap, slanted hand slots, cargo pockets with hook and loop closures, knee-to-hem leg zippers, and ankle hook and loop closures. The fabric system comprises 100% polyester face fabric, an ePTFE membrane, and a 100% polyester knit fleece backing, all in Olive Drab. The document details specific material characteristics and test methods for color, weight, water repellency, vapor resistance, air permeability, shrinkage, elongation, and colorfastness. Sizing is generous to allow for layering, with male sizes from S-6XL and female sizes from S-3XL, each in short, regular, and tall lengths. Manufacturers must certify that the product meets these specifications and is commercially available, free from defects.

This U.S. Customs and Border Protection (USBP) document outlines the specifications for a heavy-weight, olive drab, unisex rain pant for Border Patrol personnel. The pant must be windproof, breathable, and water-resistant, featuring an elasticized waistband, adjustable hook and loop tabs, a zipper fly with snap closure, five belt loops, cargo pockets with concealed zippers, knee-to-hem zipper leg openings, a gusseted crotch, four suspender loops, black zippers, and hem grommets. The fabric consists of a 94% nylon and 6% elastomeric shell, a 100% expanded polytetrafluoroethylene barrier, and a 100% polyester fleece liner, all in Olive Drab (19-0414 TCX) and meeting specific colorfastness standards. Available in sizes Small to 6 Extra Large, in Short, Regular, and Tall lengths, the pants must be free of defects. Manufacturers must certify conformance to these specifications and commercial marketplace standards, with the Government reserving the right to verify compliance before delivery. This document was reviewed and approved by various UMC personnel.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for an insulated, flame-resistant softshell jacket for Air and Marine Operations (AMO) personnel. The jacket, available in black and formerly coyote tan, is designed for protection in moderately cold, windy, and wet conditions. Key features include water and wind-resistant, breathable, three-layer meta-aramid fabric with a brushed fleece interior, multiple zippered pockets, adjustable cuffs, and an adjustable hem. The fabric must meet specific flame resistance standards (ASTM D 6413/F2302) for char length, after-flame, melting/dripping, and thermal shrinkage, as well as colorfastness requirements. The jacket is available in unisex sizes XS-2XL. Emblems and customizations, including agency emblems, badges, and nametape patches, are specified for both tan and black versions. Manufacturers must certify that the product meets all salient characteristics and conforms to commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for insulated soft shell jackets for the U.S. Border Patrol (USBP). This CID, identified as CID3-6-06(a-d), covers both male and female versions, with options for single or double insulation. The jackets are designed for protection in moderately cold, windy, and wet conditions, featuring a water and wind-resistant, breathable olive drab nylon shell with a polyester backer film, and 100% polyester loft insulation. Key features include a center front zipper with a wind flap, multiple pockets, hook and loop wrist cuff adjustments, an elasticized bottom hem allowing wear over a duty belt, and loop tape patches for branding. Double-insulated jackets include a stowable and removable hood. The jackets will be available in unisex sizes XS-6XL in various lengths (Short, Regular, Tall, Extra Tall) and must be free of defects. Manufacturers are required to certify that the product meets the specified salient characteristics and conforms to commercial marketplace standards.

This U.S. Customs and Border Protection (USBP) commercial item description outlines the requirements for olive drab soft shell jackets for male and female Border Patrol personnel. The jackets, designed for protection in moderately windy and wet conditions, must be water and wind-resistant with a stand-up collar, front zipper with a wind flap, and adjustable wrist cuffs and bottom hem. Key features include two side-entry chest pockets, external side-entry hand pockets, and full side openings with zippers and wind flaps for duty belt access and ventilation. The fabric is 100% nylon (1.9 oz/yd2) with a polyester backer film, in olive drab with black zippers. Sizing ranges from S-6XL for males and S-3XL for females, in short, regular, and tall lengths. The jackets require specific loop fastener attachments on the biceps and chest for branding. Manufacturers must certify that their products meet these specifications and conform to commercial marketplace standards.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description (CID) for olive drab soft shell jackets for male and female personnel. These jackets, designated CBPOBP-817 (male) and CBPOBP-824 (female), are designed to be wind and water-resistant for moderately windy and wet conditions. Key features include a quarter-zip front opening, elasticized back hem, two side-entry chest pockets, hook-and-loop adjustable wrist tabs, and multiple loop tape patches for branding. The shell fabric is 94% nylon and 6% elasticized fiber, with a 100% brushed polyester knit black liner. The jacket comes in unisex sizes XS to 6XL in various lengths and must be free of defects. Manufacturers must certify that the product meets the CID's salient characteristics and commercial marketplace standards.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for Olive Drab Soft Shell Jackets for U.S. Border Patrol (USBP) male (CBPOBP-819) and female (CBPOBP-826) personnel. The jacket is designed to be water and wind-resistant, suitable for moderately windy and wet conditions. Key features include a stand-up collar, slide fastener closure with a wind flap, zippered hand and chest pockets, elasticized back hem, adjustable hook and loop wrist tabs, and multiple loop tape patches for branding. The jacket is made of 100% nylon (1.9 oz/yd2) with a polyester backer film, in Olive Drab with black zippers. It will be available in a wide range of male and female sizes (Small-6XL for males, Small-3XL for females, in Short, Regular, and Tall lengths). Manufacturers must certify that the product meets these specifications and is commercially available, with the government reserving the right to verify conformance. The document also details workmanship standards and includes review sign-offs from CBP personnel.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for 10-inch black Roper Boots for male and female personnel across the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The boots must be 100% kipskin leather with a rounded roper toe, leather outsole, and a walking/riding roper heel with rubber. Key features include a 10-inch tall upper and a cushioned insole. The document specifies detailed sizing for both male and female personnel, ranging from various whole and half sizes. Manufacturers must certify that their product meets these salient characteristics, conforms to their own specifications, and is commercially available, with the government reserving the right to verify conformance before delivery. The boots must also be free from defects, ensuring high-quality workmanship.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for 8-inch duty boots for personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). These boots, available in black, tan, or coyote, come in uninsulated and insulated versions (200g or 600g synthetic insulation). Key features include a leather/fabric waterproof upper, rubber lug sole, fiberglass shank, 1000 denier nylon, full-grain polishable leather, and a waterproof/breathable liner. The specification details various male and female sizing options for each boot type and requires manufacturers to certify that the boots meet all specified characteristics and conform to commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for 8-inch Tactical Boots for male and female personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The boots must be waterproof, made of leather/fabric with a rubber lug sole and fiberglass shank, and available with or without insulation. Key characteristics include a 1000 denier nylon and full-grain leather outer, 8-inch triple-stitched upper, waterproof/breathable liner, cushioned insole, and lace-up design. The Tan version must be flame resistant and lack a side zipper. Available colors are Tan, Black, and Coyote. Sizing includes unisex whole sizes 3-15 in Medium and 4-15 in Wide, with corresponding half sizes. Manufacturers must certify that the product meets these specifications and is commercially available, with the Government reserving the right to request proof of conformance.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for 8-inch, black, unisex duty boots for the U.S. Border Patrol (USBP) and Office of Field Operations (OFO) personnel. The boots must be made of full-grain polishable leather and nylon, featuring an 8-inch double-stitched upper, EVA midsole, and a slip and oil-resistant rubber outsole. Key features include a waterproof/bloodborne pathogen-resistant liner, a front center black lace system, a side coil zipper with a security overlay, and a removable molded insole with a polyurethane footbed. The boots are available in regular and wide sizing, ranging from 4.0 to 15.0. Manufacturers must certify that their product meets these salient characteristics and conforms to commercial marketplace standards. This document, updated to an 8-inch measurement in 2020 and revised in 2025 to discontinue CBPCBP-033 and add CBPCBP-878, ensures consistency and quality for uniform items.

This U.S. Customs and Border Protection document outlines the specifications for 6-inch, black, unisex safety boots for the U.S. Border Patrol (USBP) and Office of Field Operations (OFO). Key requirements include a leather/fabric waterproof upper with a composite safety toe that is ASTM F 2413-11 compliant, bloodborne pathogen resistant, and features a side zipper with hook and loop closure. The boots must have a padded collar, gusseted tongue, nylon shank, and a non-marking rubber lugged outsole. Sizing ranges from unisex whole sizes 4-15 (Med) and 7-15 (Wide), with half sizes also available. Manufacturers must certify that their product meets these salient characteristics and conforms to commercial marketplace standards, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for 9-inch black safety boots for male and female personnel of the U.S. Border Patrol (USBP) and Office of Field Operations (OFO). These waterproof boots must feature a leather/fabric construction, a side zipper, a rubber lug sole, and an ASTM F 2413-11 compliant composite safety toe. Key characteristics include full-grain leather and 1000 denier nylon outer, a waterproof/breathable liner, bloodborne pathogen resistance, padded collar, nylon shank, and a cushioned EVA insole. The boots must be black, free of defects, and available in a range of unisex whole and half sizes. Manufacturers must certify that the product meets all salient characteristics and conforms to commercial marketplace standards.

This document outlines the U.S. Customs and Border Protection (CBP) uniform specification for 8-inch, tan, unisex flight boots for Air and Marine Operations (AMO) personnel. The boots must be waterproof, made of nylon and cattle hide leather, with an 8-inch upper and a rubber lugged outsole (e.g., Vibram®). Key features include a waterproof/breathable liner, lace-up design (no side zipper), and U.S. Air Force flight approval. They must be available in unisex sizes 3-16 (whole and half, narrow to extra-wide) and come in tan or coyote. Manufacturers must certify that the product meets these specifications and their own quality standards, reserving the government's right to request proof of conformance before delivery.

U.S. Customs and Border Protection (CBP) has issued a uniform specification, CBPOBP-239, for 6-inch black unisex duty boots for U.S. Border Patrol (USBP) personnel. The specification details requirements for a waterproof leather/fabric boot with a side zipper and rubber lug sole. Key characteristics include full-grain leather and 1000 denier nylon outer, a 6-inch tall double-stitched upper, wicking breathable liner, padded collar, gusseted tongue, nylon shank, non-marking rubber lugged outsole, side zipper with hook and loop closure, and a cushioned EVA insole. The boots must be black and available in a comprehensive range of unisex whole and half sizes. Manufacturers must certify that their product meets these specifications and their own quality standards, with CBP reserving the right to verify conformance.

This U.S. Customs and Border Protection (CBP) commercial item description (CID) CBPOAM-338 outlines the requirements for 8-inch insulated flight boots for Air and Marine Operations (AMO) personnel. The boots must be unisex, leather/fabric, waterproof, and insulated with 600g Thinsulate® or equivalent. Key features include a full-grain leather outer, rubber lugged outsole (e.g., Vibram®), lace-up closure (no side zipper), and U.S. Air Force flight approval. Available in tan or coyote, they must come in unisex sizes 3-16 (whole/half sizes) in narrow, regular, wide, and extra-wide widths. Manufacturers must certify conformance to all salient characteristics and quality standards, with the Government reserving the right to verify compliance before delivery.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for Extreme Cold Weather Insulated Tactical Boots for male and female personnel of the U.S. Border Patrol (USBP) and Office of Field Operations (OFO). The boots are 8-inch tall, waterproof, leather/fabric, and feature a rubber lug sole and fiberglass shank. They are available with either 400 grams (CBPCBP-255) or 600 grams (CBPCBP-256) of synthetic insulation (e.g., Thinsulate®) and a waterproof/breathable liner (e.g., Gore-Tex®). Key characteristics include a 1000 denier nylon and water-resistant full-grain leather outer, triple-stitched upper, wicking inner lining, lace-up design, and cushioned insole. The boots must be black and available in unisex half-sizes 4-14, and whole size 15, in both medium and wide widths. Manufacturers must certify that the product meets all specified characteristics and conforms to their own quality standards, with the Government reserving the right to verify conformance.

The U.S. Customs and Border Protection, Office of Field Operations (OFO), has issued a uniform specification (CBPOFO-292) for 8-inch black duty boots. These boots are for male and female personnel and must be 8-inch tall, side-zip boots with a rubber lug sole. Key characteristics include a breathable synthetic fabric outer, 8.3-inch tall upper, breathable fabric liner, padded ankle support, and a removable cushioned shock absorption insole. The rubber compound outsole must be non-marking, oil, fuel, and skid resistant, as well as anti-static. The boots require a side zipper with lace-up and will be available in unisex sizing only, ranging from medium width 4-15 and wide width 7-15. Manufacturers must certify that the product meets these specifications and conforms to commercial marketplace standards, with the government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for 8-inch black, unisex duty boots for personnel in the Office of Field Operations (OFO) and U.S. Border Patrol (USBP). The CID, CBPOFO-293, outlines specific requirements for the boots, which must be 8-inch tall, waterproof leather with a rubber lug sole. Key features include a waterproof breathable leather outer, a PFAS-free liner, a TPU inner shank, padded ankle support, and a removable cushioned shock absorption insole. The rubber compound outsole must be non-marking, oil, fuel, and skid resistant, as well as anti-static. The boots are required to be lace-up and available in unisex sizing, specifically medium and wide widths ranging from sizes 4-15. Manufacturers must certify that their product meets all salient characteristics and conforms to their own quality standards, reserving the right for the Government to request proof of conformance.

The U.S. Customs and Border Protection (USBP) has issued a uniform specification for a Coyote Tactical Desert 6” Boot, Unisex, available in hot weather (CBPCBP-333) and waterproof (CBPCBP-288) versions. These boots are designed for male and female USBP personnel, featuring a low-cut rubber outsole with a textile and full-grain leather upper. Key characteristics include a dual-density midsole for cushioning and stability, EVA foam for shock reduction, anti-debris mesh, a gusseted tongue, breathable lining, a secure fit, a cushioned instep pad, an OrthoLite® or equivalent insole, locking eyelets, traditional lacing, and a puncture-resistant sole made of 2mm thick leather. The waterproof version (CBPCBP-288) includes a PFAS-free waterproof layer, while the hot weather version (CBPCBP-333) does not. The boots are coyote-colored and available in unisex whole sizes 4-15 and half sizes 6½-11½. Manufacturers must certify that the product meets these specifications and commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for Mid Tactical Boots to be worn by personnel from U.S. Border Protection (USBP) and the Office of Field Operations (OFO). This commercial item description details requirements for unisex tactical boots available in black (CBPCBP-369) and coyote brown (CBPCBP-347). Key features include a leather and textile mesh upper that rises over the ankle, a high traction sole, and a protective mudguard. Salient characteristics specify full-grain leather, non-reflective textile, anti-debris mesh, breathable lining, a molded contoured insole, multi-density foam midsole, a pre-laced system with a lace pocket, and a gusseted tongue. Boots must be free of defects and come in full sizes 4-15 and half sizes 6.5-12.5. Manufacturers must certify that their product meets these specifications and is commercially available, with the Government reserving the right to verify conformance.

The U.S. Customs and Border Protection (USBP) has issued a uniform specification for 6-inch black tactical boots, available in insulated and insulated/waterproof versions (CBPCBP-367 and CBPCBP-368). These unisex boots, intended for male and female USBP personnel, feature a leather/fabric upper, rubber lug sole, fiberglass shank, and a protective toecap. Key characteristics include durable non-reflective textile and full-grain nubuck leather, a waterproof/breathable liner for the waterproof model, a puncture-resistant outsole conforming to ISO 20344:2011, and an all-terrain gripping outsole. The boots must be black and available in unisex full sizes 4-15 and half sizes 6.5-11.5. Manufacturers must certify that their product meets these specifications and is commercially available, with the government reserving the right to verify conformance.

U.S. Customs and Border Protection (CBP) has issued a uniform specification for 6-inch tactical boots for male and female Office of Border Protection (OBP) personnel. The specification, CID 4-2-22 (a-b), details requirements for durable, non-reflective leather/fabric boots with a 6-inch upper. Key features include a PFAS-free, slip, heat, and fuel-oil resistant outsole, dual-density foam midsole, and PFAS-free waterproof lining. The boots must be Coyote Brown and utilize a traditional lacing system with closed eyelets. Sizing is specified for males (CBPOBP-380) from 7.5 to 16 and females (CBPOBP-408) from 5.5 to 11. Manufacturers must certify conformance to these characteristics and commercial marketplace standards, with the government reserving the right to request proof. The document also includes version control, noting the addition of PFAS-free language in May 2025.

This document outlines the U.S. Customs and Border Protection's uniform specification for black dress shoes for male and female personnel of the U.S. Border Patrol (USBP) and Office of Field Operations (OFO). The specification covers several models (CBPCBP-011, CBPCBP-012, CBPCBP-332, CBPCBP-354, and CBPCBP-355), detailing requirements for style, salient characteristics, material, color, and sizing. All shoes must be black, 100% leather, lace-up oxford-style with a rounded toe. Key features include rubber or polyurethane outsoles, breathable liners, shock absorption, and removable insoles. Specific models like CBPCBP-332, CBPCBP-354, and CBPCBP-355 feature full-grain polishable leather, slip and oil-resistant outsoles, and Goodyear welted construction. The document also specifies detailed sizing for each model and emphasizes that shoes must be free of defects. Manufacturers must certify that their products meet these specifications and conform to commercial marketplace standards. This document is crucial for vendors responding to government RFPs for uniform footwear.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID4-3-02 (a-e), for black Clarino dress shoes to be worn by personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The specification outlines requirements for leather lace-up oxford-style shoes with a high gloss finish. Different models, including CBPOFO-050 (male), CBPOFO-052 (female), CBPCBP-346 (unisex), CBPCBP-351 (male), and CBPCBP-352 (female), have specific salient characteristics such as rounded toes, rubber or polyurethane outsoles with slip and oil resistance, shock-absorbing capabilities, and removable insoles. The shoes must be made of high-gloss poromeric material and available in various sizes for male and female personnel. Manufacturers are required to certify that their products meet these specifications and conform to commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification (CBPCBP-018) for a unisex low quarter athletic shoe to be worn by personnel of the U.S. Border Patrol (USBP) and Office of Field Operations (OFO). This commercial item description outlines the requirements for the shoe, which must be a low-cut, oxford-style, lace-up shoe made of full-grain leather and 1200 denier fabric. Key characteristics include a padded collar and tongue, a slip-resistant rubber or polyurethane outsole that exceeds ASTM F 489-96 standards, a breathable moisture-wicking liner, a nylon shank, and a removable cushioned EVA insole. The shoe must be black and available in unisex whole sizes 6-15 (C, D, E, EEE) and half sizes 6½-11½ (C, D, E, EEE). Manufacturers must certify that the product meets these specifications and their own quality standards, reserving the government's right to verify conformance.

This U.S. Customs and Border Protection (CBP) document specifies requirements for a unisex, low-quarter, athletic boat shoe for Office of Field Operations (OFO) and Air Marine Operations (AMO) personnel. The shoe, available in black, tan/coyote, and gray, must feature a dual-density midsole, quick-drying, water-repellent nylon mesh and synthetic leather upper, protective toe cap, nylon loop lacing, and a donning assist heel loop. Specific models (CBPOAM-411, CBPOFO-370, CBPOAM-040) have unique outsole and tongue characteristics. The materials must be PFAS-free. Available in unisex whole sizes 4-14 and half sizes 6½-11½, the shoes must be free of defects. Manufacturers must certify conformance to specifications and commercial marketplace standards, with the government reserving the right to verify. The document includes version control and official approvals, reflecting updates in 2025.

This U.S. Customs and Border Protection (CBP) commercial item description (CID4-4-05) outlines the requirements for the COYOTE MARITIME BOOT, UNISEX (CBPOAM-334) for Air Marine Operations (AMO) personnel. The boot must be a low-cut 6” lace-up style made of quick-drying nylon mesh and synthetic leather, in coyote color. Key features include a dual-density EVA midsole, molded external rubber toe, injection-molded TPU heel counter, nylon loop lacing, and PFAS-free waterproof membrane. Available in unisex whole sizes 5-14 D and EEE, and half sizes 5½-11½ D and EEE. Manufacturers must certify conformance to these specifications, their own standards, and commercial marketplace quality, with the government reserving the right to request proof. The document has been updated to include PFAS-free language.

This commercial item description, CID4-5-01, outlines the requirements for lightweight crew socks for U.S. Customs and Border Protection personnel, including the U.S. Border Patrol, Office of Field Operations, and Air and Marine Operations. The socks must be black, unisex, lower calf height, and primarily made of merino wool (over 60%), with up to 30% nylon, and may include polyester or Lycra®. Key characteristics include cushioning, anti-microbial and moisture-wicking properties, and machine washability. They must be available in sizes Small to XXL and be free of defects. A crucial requirement is the "DHS" branding, 3/4 inch high and 1 1/2 inches wide, woven horizontally into the back of both socks near the calf. Manufacturers must certify that the product meets these specifications and their own quality standards, reserving the government's right to verify conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for Midweight Crew Socks, intended for male and female personnel of the U. S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The socks must be lower calf height, primarily made from merino wool (>60%) with up to 30% nylon, and include polyester or Lycra®. Key characteristics include full cushioning, moisture-wicking, anti-microbial properties, and machine washability. Available in unisex sizes (Small to XXL), the socks come in Tan and a discontinued Black. They must be free of defects and feature a ¾ inch high by 1 ½ inch wide horizontal “DHS” branding woven into the back near the calf. Manufacturers must certify that the product meets these specifications and is commercially available, with the Government reserving the right to require proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID4-5-04) for Midweight Boot Socks for personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The specification outlines requirements for full-length, over-the-calf, tan, unisex socks made primarily from high-bulk acrylic yarn. Key features include extra-thick knit for cushioning and insulation, reinforced heel and toe, a welted top, and machine washability. The socks must be available in sizes Small to XXL and be free of defects. A notable requirement is the inclusion of 3/4-inch high and 1 1/2-inch wide horizontal “DHS” branding woven into the back of both socks near the calf. Manufacturers must certify that their product meets these salient characteristics and conforms to commercial marketplace standards. The government reserves the right to request proof of conformance before delivery.

This U.S. Customs and Border Protection (CBP) commercial item description, CID4-5-05, outlines the requirements for Midweight Boot Socks for personnel in the U.S. Border Patrol (USBP) and Office of Field Operations (OFO). The socks must be full-length, over-the-calf, and made from a blend primarily of acrylic (>60%) and merino wool (>20%), with other materials like nylon or Lycra® allowed. Key characteristics include an extra thick knit for cushioning, reinforced heel and toe, a welted top, and machine washability. They must be black and available in unisex sizes Small to XXL. The document specifies high-quality workmanship, free from defects, and requires a 3/4 inch high by 1 1/2 inch wide horizontal “DHS” branding woven into the back of both socks near the calf. Manufacturers must certify that the product meets these specifications and conforms to their own quality assurance practices, reserving the right for the Government to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID4-5-06) for midweight crew socks for the U.S. Border Patrol (USBP) and Office of Field Operations (OFO). The unisex socks must be mid-calf height, primarily acrylic (80% acrylic, 20% nylon), machine washable, and black with white soles. They will be available in sizes Small, Medium, Large, Extra Large, and XXL. The socks must be free of defects and feature a 3/4-inch high, 1 1/2-inch wide horizontal “DHS” branding woven into the back, positioned at the center of the rib near the calf. Manufacturers must certify that the product meets these specifications and their own quality standards, reserving the right for the Government to request proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) requirements for heavyweight boot socks for the U.S. Border Patrol (USBP) and Office of Field Operations (OFO) personnel. The socks must be black, full-length, over-the-calf, and made primarily of at least 70% merino wool with other synthetic fibers for stretch. Key characteristics include extra-thick knit for cushioning and insulation, moisture-wicking, anti-microbial properties, and machine washability. They must be available in unisex sizes (Small to XXL) and be free of defects. A 3/4-inch high and 1 1/2-inch wide horizontal “DHS” branding must be woven into the back of both socks near the calf. Manufacturers must certify that the product meets these specifications and commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for Heavyweight Boot Socks, designed for male and female personnel across the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). These over-the-calf socks are primarily made of merino wool (over 70%), with up to 30% nylon, and may include acrylic, polyester, or Lycra®. Key characteristics include reinforced heels and toes, extra-thick knit for cushioning and insulation, moisture-wicking properties, and machine washability. Available colors are Tan (CBPUMC-038) and Black (CBPUMC-039), with White (CBPCBP-006) being discontinued. The socks come in unisex sizes (Small to XXL) and must be free of defects. A 3/4-inch high and 1 1/2-inch wide horizontal “DHS” branding must be woven into the back of both socks near the calf. Manufacturers must certify that the product meets these specifications and is commercially available, with CBP reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description, CID4-5-09 (a-b), for unisex ankle crew socks for its Air and Marine Operations (AMO), Office of Field Operations (OFO), and U.S. Border Patrol (USBP) personnel. The specification details requirements for lightweight socks in white (CBPOAM-016) and black (CBPCBP-277). Key characteristics include ankle height, primary construction from polypropylene yarn (<80%) with nylon, elastic, and/or Lycra® allowed, anti-microbial and moisture-wicking properties, and machine washability. The socks must be free of defects and feature a 1/2 inch high by 1 inch wide "DHS" branding woven into the back above the heel. Sizing ranges from Small to XXL. Manufacturers must certify that the product meets these salient characteristics and conforms to their own commercial quality assurance practices, with the Government reserving the right to verify conformance.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for Navy Campaign Hats for male and female Office of Field Operations (OFO) personnel. The hats, available in fur felt (CBPOFO-078) or Milan straw (CBPOFO-102), must feature a four-dent crown, a 3-1/8” wide stiffened flat brim with oval eyelets, and round crown eyelets for badge mounting. They will be navy blue (FED-STD 595C color chip 35044) and offered in unisex sizes 6-3/8 to 7-7/8 (Regular), 6-1/2 to 8 (Long Oval), and 6-1/2 to 7-7/8 (Extra Long Oval). The Milan straw version includes a double-layer brim, breathability, and UV protection. Manufacturers must certify that their products meet these characteristics and conform to commercial marketplace standards, with the Government reserving the right to verify compliance before delivery. The hats must also be free of defects.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) uniform specification document CID5-1-02 (a-b) details the requirements for the Brown Campaign Hat for male and female personnel. The hat, available in Fur Felt (CBPOAM-003) or Milan Straw (CBPOAM-048), features a four-dent crown, a 3-1/8” wide stiffened flat brim with oval eyelets, and pyramid-stacked round vent eyelets on the crown. It also includes two vertical eyelets for badge mounting and an internal sweatband, with no banding around the crown. The material must be breathable and provide UV protection, with the Milan Straw version having a double-layer brim. The color is Dark Brown (FED-STD 595C). Sizing is unisex, offered in Regular (6-3/4 to 8-1/8), Long Oval (6-7/8 to 8-3/8), and Extra Long Oval (7-1/4 to 7-5/8) increments. Manufacturers must certify that the hats meet these specifications and conform to commercial marketplace standards, with the government reserving the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Green Campaign Hat worn by male and female personnel of the U.S. Border Patrol (USBP). The specification details requirements for a four-dent crown, flat brim campaign-style hat, available in either fur felt (CBPOBP-135) or Milan straw (CBPOBP-131). Key characteristics include a 3-1/8” stiffened flat brim with two oval eyelets on each side, no banding, and an internal sweatband. The Milan straw version features a double-layer brim and breathable, UV-protective material. The hats must be Border Patrol Green (FED-STD 595C color chip 34083) and available in unisex sizes from 6-3/8 to 8, in regular, long oval, and extra long oval fits. Manufacturers must certify that the product meets these salient characteristics, conforms to their own specifications, and is commercially available, with the Government reserving the right to require proof of conformance.

The U.S. Customs and Border Protection (USBP) Uniform Specification CID5-1-04 (a-b) outlines the requirements for the Tan Western Hat for male and female Border Patrol personnel. This commercial item description details specifications for two versions: a Fur Felt hat (CBPOBP-204) and a Straw hat (CBPOBP-205). Both styles feature a western design with a cattleman crown, a 4-3/4” long oval crown, and a 4” wide brim. Salient characteristics include a two-ply hatband and an internal sweatband. The Fur Felt hat is made from 6X premium fur felt in a Fawn color, while the Straw hat uses 10X Genuine Shantung Panama in a Natural color and includes three eyelets on each side of the crown. Hats are available in Unisex sizes (Regular, Long Oval, and Extra Long Oval) in eighth-inch increments. Manufacturers must certify that their product meets these specifications, conforms to their own quality standards, and is sold commercially, with the Government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a uniform specification for a black ball cap. This commercial item description outlines the requirements for the OFO Ball Cap (CBPOFO-391), which replaces the discontinued CBPOFO-203. The cap must be a 6-panel, low-profile, structured ball cap with a medium crown profile, medium curved brim, and no button on top. Key features include a moisture-wicking headband and lining, a durable water-repellent finish, one finished vent hole per panel, an adjustable hook-and-loop back strap, and six rows of reinforcement stitching on the brim. The material is a 6.2 oz/yd2 canvas fabric (67% polyester/33% cotton) in black, available in one unisex size. The front crown will feature

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a uniform specification for a Vented Black Ball Cap (CBPOFO-392) for male and female personnel. This commercial item description outlines the requirements for a 6-panel mid-profile ball cap with a flexible fit. Key characteristics include a curved bill, one finished vent hole per front panel, four vented back panels, a matching top button, and an adjustable hook and loop back strap. The cap is to be made of 92% polyester/8% Spandex® or equivalent material and will be black. It will be available in one unisex size. The front of the cap will feature "CBP" embroidered in block letters with grey thread, measuring 1 ½” high by 4” wide, 1 ¼” above the bill seam. Manufacturers must certify that the product meets these specifications and is commercially available, with the government reserving the right to verify conformance. A recent update in July 2024 changed the color from navy blue to black and the fit from flex to an adjustable strap, discontinuing the CBPOFO-202 model.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID5-2-03, for a black ball cap designated for male and female personnel within the Office of Field Operations (OFO) and the Office of Training and Development (OTD). This commercial item description outlines the requirements for the "BALL CAP, OFO/OTD, BLACK" (CBPOFO-084). The cap must be a 6-panel low-profile style with an adjustable strap, made from 65% polyester/35% cotton fabric. Key characteristics include vent holes, a matching top button, a 2 ¾” stiffened peak, an adjustable hook and loop back strap, and an internal sweatband. The cap is to be black and available in a one-size-fits-all unisex sizing. Embroidery specifications include "CBP" in 1 3/8” yellow-gold block letters on the front, and "U. S. CUSTOMS AND BORDER PROTECTION" in ¼” yellow-gold block letters across the back, arranged in two lines. The document also specifies workmanship standards, requiring the hat to be free of defects. Manufacturers must certify that the product meets these salient characteristics, conforms to their own standards, and is a commercially sold item. The Government reserves the right to request proof of conformance before delivery.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for an OFO/OTD Flexible Fit Ball Cap. This commercial item description details requirements for a black, 6-panel, low-profile ball cap with a flexible fit, intended for both male and female personnel in the Office of Field Operations (OFO) and the Office of Training and Development (OTD). Key characteristics include a 98% polyester/2% spandex material, a 2 ¾” stiffened peak, and a flexible sweatband. The cap will feature "CBP" embroidered on the front in 1 3/8” yellow-gold block letters and "U.S. CUSTOMS AND BORDER PROTECTION" on the back in ¼” yellow-gold block letters. The document specifies sizing in small-medium and large-extra large. It also includes rigorous workmanship standards to ensure the absence of defects and requires manufacturers to certify that the product meets all specified salient characteristics and conforms to their own quality assurance practices, consistent with commercially sold items.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the OFO Instructor Ball Cap, intended for both male and female personnel in the Office of Field Operations (OFO) and U.S. Border Patrol (USBP). The red, one-size-fits-all, 6-panel low-profile cap is made of 100% polyester with a stiffened peak and adjustable hook and loop strap. It features specific embroidery: “CBP INSTRUCTOR” in yellow-gold block letters on the front for OFO, or the U.S. Border Patrol emblem on the front for USBP. Both versions will have “U. S. CUSTOMS AND BORDER PROTECTION” embroidered in yellow-gold block letters across the back. Manufacturers must certify that the product meets these characteristics, conforms to their own standards, and is a commercially available item, with the government reserving the right to verify conformance.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specification for the RDU Flexible Fit Ball Cap, intended for both male and female personnel. The specification details a 6-panel, low-profile ball cap with a flexible fit, made from 75% polyester and 25% wool, and free of PFAS. Key characteristics include a stiffened peak, flexible sweatband, and olive drab color (19-0414 TCX). The cap will feature a 2 ½” diameter U. S. Border Patrol subdued round emblem embroidered on the front and “U. S. CUSTOMS AND BORDER PROTECTION” in ¼” black block letters across the back. The document specifies sizes M, XL, and XXL, and requires manufacturers to certify conformance to these specifications, including workmanship free of defects. This revised specification discontinues CBPOBP-221 and incorporates CBPOBP-319 with a subdued emblem.

The U.S. Customs and Border Protection, Air and Marine Operations (AMO) uniform specification document, CID5-2-08, outlines the requirements for a flexible fit ball cap for AMO personnel. This commercial item description details a 6-panel, low-profile black ball cap made from 98% polyester and 2% spandex. Key features include a stiffened peak, flexible sweatband, and specific embroidery: the official Office of Air and Marine Eagle with “AIR AND MARINE OPERATIONS” on the front, and “U. S. CUSTOMS AND BORDER PROTECTION” on the back. The caps are available in small-medium and large-extra large. Manufacturers must certify that the product meets all specified characteristics, workmanship standards, and is identical to commercially available versions.

This document outlines the uniform specifications for the U.S. Customs and Border Protection (CBP) Tan Ball Cap, intended for personnel in Air and Marine Operations (AMO), Office of Field Operations (OFO) SRT, and U.S. Border Patrol (USBP). The cap is a 6-panel, low-profile design made of 100% cotton, tan in color (approximating FED-STD 595C color chip 30279), and comes in one-size-fits-all unisex sizing. Key features include finished vent holes, a matching top button, a 2 ¾” stiffened peak, an adjustable hook and loop back strap, and an internal sweatband. Embroidery details vary by division: AMO caps (CBPOAM-046) feature the Official Office of Air and Marine Eagle with

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Special Operations Group (SOG) Ball Cap, designated CBPOBP-494. This specification details the requirements for a camouflage, one-size-fits-all, unisex ball cap to be worn by male and female Office of Border Patrol (OBP) personnel. Key characteristics include a 6-panel soft crown, high curve brim, various tan patches, an adjustable tan hook and loop back strap, and a wicking jersey knit fabric sweatband. The material is specified as 65% polyester/35% cotton ripstop with a durable water repellent finish, meeting specific weight and colorfastness standards. Manufacturers must certify that the product conforms to these salient characteristics and their own quality assurance practices, with the government reserving the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Air and Marine Operations (AMO) Mesh Ball Cap, identifying it as a commercial item. The specification details requirements for both black (CBPOAM-335) and tan (CBPOAM-336) versions, to be worn by male and female AMO personnel. Key characteristics include a 6-panel low-profile style with a twill front and breathable mesh side/rear panels, a matching top button, front panel vent holes, an adjustable hook & loop back strap, and an internal sweatband. The material is specified as 65% cotton/35% polyester, available in one-size-fits-all. Embroidery requirements include the official Office of Air and Marine Eagle,

The U.S. Customs and Border Protection (USBP) Uniform Specification outlines the requirements for the RDU Mesh Ball Cap for male and female Border Patrol personnel. This 6-panel low-profile cap features a fabric front, breathable mesh side and rear panels, a matching top button, a 2 ¾” stiffened peak, and an adjustable hook and loop back strap with an internal sweatband. The material is a 75% acrylic/25% wool twill and 100% nylon mesh, explicitly free of PFAS. The color is Olive Drab, one size fits all. The front crown will be embroidered with the 2 ½” diameter U.S. Border Patrol subdued round emblem, ¾” above the peak. Manufacturers must certify that the product meets these specifications, is free of defects, and conforms to their commercial quality standards.

This U.S. Customs and Border Protection Uniform Specification details the requirements for a Wool Knit Hat to be worn by both male and female personnel in the Office of Field Operations (OFO) and Air & Marine Operations (AMO). The hat must be a watch cap style, made of two-ply ribbed knit, 100% circular knit wool with no seam, 11 ½ inches in total length, and a 2 ½-inch four-seam crown. It is available in Navy (FED-STD 595C color chip 35044) and Black (FED-STD 595C color chip number unavailable), and comes in one-size-fits-all. Manufacturers must certify that the product meets these characteristics and conforms to their own commercial standards, with the government reserving the right to request proof of conformance.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specification for a black fleece hat to be worn by personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). The hat is a watch cap style made of 200-weight, 100% polyester fleece, free of PFAS, with flat seam construction and a lower length of 7 ½ inches. Specific sizing varies by division: USBP hats come in Medium and Extra Large, while OFO and AMO hats are one-size (Medium). Each hat features an embroidered emblem 3/8” below the edge, opposite the back seam, with distinct designs for USBP (Navy and Gold or a loop patch for a subdued emblem), OFO, and AMO. The document details material characteristics, color, sizing, embroidery specifications, and workmanship standards. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards. The document includes version control updates and approvals from CBP uniform liaisons and account managers, ensuring accuracy and consistency.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a black fur cap, designated as CBPCBP-074. This commercial item description covers requirements for a modified Ushanka-style fur cap to be worn by both male and female personnel in the Office of Field Operations (OFO) and U.S. Border Patrol (USBP). Key characteristics include construction from 100% sheepskin/lambskin mouton fur, a single mouton crown with a quilted insulating liner, a stiffened double-mouton visor, and half-length ear flaps designed for law enforcement with a chin/retention strap. The cap must be black and available in unisex sizes from extra small to double extra large. Manufacturers are required to certify that the product meets these specifications, conforms to their own quality standards, and is sold commercially, with the Government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description for a Boonie Hat for male and female Border Patrol personnel. This specification, CID5-2-17(a-b), outlines the requirements for a traditional military-style boonie hat, referencing MIL-H-44105B with specific exceptions. Key characteristics include a 65% polyester/35% cotton ripstop fabric, a stiffened three-inch brim, brass screen vents, an adjustable chin strap, and an embroidered U.S. Border Patrol emblem. The fabric must be 5.8 oz/yd2, machine washable, and PFAS-free, meeting specific test methods for weight, breaking strength, color, and colorfastness. The hat must be available in unisex ¼” size increments from 6½ to 7¾ and be free of defects. Manufacturers are required to certify that their product meets these salient characteristics and conforms to their own commercial specifications. The document also includes a version history detailing changes to associated product numbers (CBPOBP-391 and CBPOBP-409).

This document outlines the U.S. Customs and Border Protection (CBP) uniform specification for the Boonie Hat, Camo, to be worn by Special Operations Group (SOG) personnel of the Office of Border Patrol (OBP). The hat must be a traditional military-style boonie hat, available in six unisex sizes (6½ to 7¾). Key characteristics include olive drab webbing, a 2¼-inch stiffened brim, four black metal screen vents, and an adjustable chin strap. The hat will feature “DHS” embroidered in ¼-high brown lettering on the back. The material is specified as 50% polyester/50% cotton, 6.5 oz/yd2 ripstop fabric, free of PFAS, and machine washable. It must meet specific fabric requirements for weight, breaking strength, colorfastness, and an acceptable camouflage pattern (MultiCam® or equivalent). Manufacturers must certify that the product meets these specifications and commercial marketplace standards. MIL-H-44105B can be used for design and manufacturing unless otherwise specified.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a uniform specification for a black Boonie Hat for male and female personnel. This commercial item description, CID5-2-21, outlines requirements for a military-style boonie hat, CBPCBP-077, built to MIL-H-44105B with specific exceptions. Key features include a 65% polyester/35% cotton ripstop woven fabric, a map pocket in the crown, no crown loops, a 2 3/8-inch stiffened brim, four black metal screen vents, and an adjustable chin strap. The hat must be black, machine washable, free of PFAS, and branded with “DHS” embroidered in ¼-inch black lettering on the back. It will be available in four unisex sizes: 7, 7 ¼, 7 ½, 7 ¾. Manufacturers must certify conformance to the specified characteristics and their own quality standards. The document also notes previous revisions, including the discontinuation of Navy Boonie Hats and the addition of DHS branding, with reviews by CBP personnel affirming its accuracy.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for an extreme cold weather balaclava for U.S. Border Patrol (USBP) personnel. The balaclava, identified as CBPCBP-551, is designed for both male and female personnel, providing full head, neck, and face coverage with an eye opening and breathability features. Key characteristics include windproof, breathable wicking fleece construction with a soft interior, flat seams, a single goggle-compatible eye opening, a mesh breathing port, and machine washability. Made from 86% polyester/14% elastomeric fiber fleece fabric with a durable water repellent finish, the material must be PFAS-free and black. Sizing will be Small, Medium, and Large. The item must be free of defects and include subdued ¼ inch high “DHS” branding silk-screened on the mid-right side. Manufacturers must certify that the product meets these specifications and their own quality standards, reserving the right for the Government to verify conformance. This CID discontinues the previous model, CBPCBP-253, and incorporates the new DHS branding requirement.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a flame-resistant balaclava, designated CBPCBP-376, for the U.S. Border Patrol (USBP) and Office of Field Operations (OFO) personnel. The balaclava must be lightweight, unisex, black, and feature a subdued "DHS" branding. Key characteristics include a single layer of 3 oz. per square yard, 100% Nomex® fabric or equivalent, flat seam construction, an 18-inch length, and a single opening for the eyes, nose, and mouth. It must provide flash flame resistance, be machine washable, and incorporate antimicrobial properties. Flame resistance testing must adhere to NFPA 1975:8.6 and ASTM D 6413, with specific requirements for char length, afterflame, and resistance to melting or dripping. The balaclava is one-size-fits-all, free of defects, and manufacturers must certify compliance with these specifications.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a unisex wool scarf to be worn by personnel of the U.S. Border Patrol (USBP) and Office of Field Operations (OFO). The scarf must be rectangular, 54 inches long and 12 inches wide, made from a single piece of 100% navy wool (FED-STD 595C color chip 35044), and finished with a sewn turned edge without fringes. It must be machine washable, free of defects, and include subdued ¼ inch high "DHS" branding silk screened vertically on the right corner. Manufacturers are required to certify that the product meets these characteristics and conforms to their own quality standards, with the government reserving the right to verify conformance. This specification, identified as CBPCBP-832, replaces CBPCBP-210 and incorporates the "DHS" branding requirement.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for Ball Caps worn by U.S. Border Patrol (USBP) personnel. The document specifies two types: CBPOBP-407 (Trainee, Blue) and CBPOBP-745 (Academy, Olive Drab), with CBPOBP-384 being discontinued. Key features include a 6-panel low-profile crown, a 2 ¾” stiffened peak, an adjustable hook and loop back strap, and a sweatband. The CBPOBP-407 cap is made of 100% woven cotton in Navy Blue, while the CBPOBP-745 is 75% acrylic/25% wool twill in Olive Drab. Both must be PFAS-free and are available in one-size-fits-all unisex sizing with no embroidery. Manufacturers must certify that the product meets specifications and is free of defects. The document also includes version control and sign-offs from various CBP personnel, confirming its accuracy and consistency.

This document outlines the U.S. Customs and Border Protection (CBP) uniform specification for a black mesh ball cap, designated CBPOFO-393, for male and female Office of Field Operations personnel. The cap is a 6-panel, mid-profile design with a 75% polyester/25% wool fabric front and 100% nylon mesh side/rear panels. It features a black color, a 2 ¾” stiffened peak, an adjustable plastic back strap, and an internal sweatband. The front of the cap must have “CBP” embroidered in grey block letters, measuring 1 3/8” high by 4” wide, positioned ¾” above the bill seam. The hat is one-size-fits-all unisex. A recent update (Version 2.0, July 2024) changed the color from navy blue to black and discontinued the previous model, CBPOFO-007. The specification has been reviewed and approved by various CBP personnel.

The U.S. Customs and Border Protection (USBP) has issued a Uniform Specification (CID5-2-29(a-b)) for a new Tactical Scarf for both male and female Border Patrol personnel. This specification discontinues the previous item CBPOBP-814 and introduces CBPOBP-828. The scarf must be a rectangular, single-layer, unisex, one-size-fits-all item, measuring 72 inches long and 30.5 inches wide, with no fringes and finished with a sewn turned edge. It is to be made from a single piece of 100% polyester knit fabric, free of PFAS, and colored Olive Drab (19-0414 TCX). Branding requires black USBP lettering, 0.25 inches high and 0.5 inches wide, screen printed on the lower right width corner parallel to the turned edge. The specification also details workmanship standards, ensuring the scarf is free of defects. Manufacturers must certify that the product meets these characteristics and conforms to their own commercial marketplace standards. The document includes reviews and approvals from various USBP personnel.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a commercial item description (CID) for unisex aviator gloves, designated CBPOAM-331. These gloves are designed for both male and female AMO personnel and must conform to MIL-DTL-811288C, with specific modifications. Key features include a full-length gauntlet, flame-resistant construction from polyamide cloth and chrome-tanned sheepskin leather palms, and touch-screen capability on the index fingers and thumbs. The fabric must meet NFPA 1975:3.3.9 flame resistance standards, with testing performed per NFPA 1975:8.6 and ASTM D 6413, ensuring minimal char length, afterflame, and no melting or dripping. The gloves must be tan and available in unisex sizes Small (7) to XXXL (12). Manufacturers must certify that the product meets all salient characteristics, conforms to their own specifications, and is commercially available, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for "GLOVES, DUTY, BASE LAYER, BLACK, UNISEX" for personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). This commercial item description, designated CBPCBP-460, replaces discontinued male and female leather versions (CBPCBP-119 and CBPCBP-118). The gloves must be insulated, wrist-length, five-fingered with a rollover cuff, and feature a non-slip silicone grip palm, touch screen capability on the thumb and index finger, and a nylon carrier loop. They are designed for a sleek fit, suitable for standalone wear or as a liner. Material requirements include a 94% polyester/6% elastomeric fiber knit outershell and a 100% polyester fleece liner, all in black. The gloves will be available in unisex sizes XS-XXL and must be free of defects. Manufacturers are required to certify that the product meets these specifications and is commercially available.

This U.S. Customs and Border Protection (CBP) document, CID6-1-03 CBPCBP-075, outlines the uniform specifications for unisex black leather slash-resistant gloves. These gloves are intended for personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). Key characteristics include a wrist-length, five-fingered design with an elastic cuff, made from goatskin leather, and featuring a 100% polyaramid (e.g., Kevlar®) knit liner for slash/cut resistance. The gloves must be black and available in unisex sizes from Extra Small (6) to XXX-Large (12). Manufacturers are required to certify that the product meets these specifications, is free of defects, and conforms to their own quality standards, being the same product sold commercially. The Government reserves the right to verify conformance before delivery.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for unisex black leather insulated gloves (CBPCBP-068) for personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). These wrist-length, five-fingered gloves feature a hook and loop wrist strap. Key characteristics include goatskin palms and fingers, a polyester fabric backing, a grip enhancer on the thumb and lower index finger, 100% polyester wicking microfiber insulation, and an elastic wrist cuff on the inner liner. The gloves must be black and available in unisex sizes from Extra Small (6) to XX-Large (11). Manufacturers must certify that the product meets these specifications, conforms to their own quality standards, and is commercially available, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description for black, unisex duty gloves, specifying requirements for two different models: CBPOBP-241 for the Office of Border Patrol (OBP) and CBPCBP-459 for U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). Both models are traditional five-fingered gloves with unisex sizing. The CBPOBP-241 features a seamless synthetic leather palm, breathable microfiber back, stretch wrist strap, and nylon storage loop, available in sizes S-XXL. The CBPCBP-459 includes a touchscreen-compatible silicone synthetic leather palm, hourglass finger pattern, rollover fingertips, eyelet knuckle expansion areas, sweat wipe on the thumb, wide hook and loop cuff, and nylon storage loop, available in sizes XS-XXL. Both are made of various synthetic knits and leathers, are black, and must be free of defects. Manufacturers must certify that their products meet these specifications and are commercially available.

The U.S. Customs and Border Protection's Air and Marine Operations (AMO) requires Flame Resistant (FR) Flight Gloves for its male and female personnel. The CID6-1-08 specification details requirements for these unisex gloves, which must be full-length, five-fingered with removed thumb, index, and middle fingertips for enhanced dexterity. Key characteristics include a full-length gauntlet, flame-resistant materials, leather reinforcement in high-wear areas, and NAVAIR approval. The gloves must be made from a lightweight Nomex/Kevlar weave and FR-treated sheepskin, available in coyote and black colors, and sizes Small to XXL. Flame resistance testing must comply with NFPA 1975:8.6 and ASTM D 6413, ensuring specific char length, after-flame, and resistance to melting, dripping, or sticking, with thermal shrinkage not exceeding 10%. Manufacturers must certify that the product meets these specifications and their own quality standards, aligning with commercial marketplace offerings.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for a Campaign Hat Carrier, designated CBPCBP-071. This CID outlines the requirements for a rigid container designed to protect campaign hats from damage during transportation or storage for personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). Key characteristics include being lightweight, constructed of rigid plastic or similar material, accommodating any size CBP campaign hat, and featuring a carrying handle. The carrier must be black, one-size-fits-all, and free of defects. Manufacturers are required to certify that their product meets these salient characteristics and conforms to their own specifications, with the Government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification (CID7-1-02, CBPCBP-208) for a leather hat band for male and female personnel in the Office of Field Operations, U.S. Border Patrol, and Air and Marine Operations. This Ranger-style, one-inch wide adjustable leather hat band must feature brass hardware and be made from plain black cowhide leather. Key characteristics include a 1-inch wide belt band with a 1/2-inch billet, sewn tip and buckle billet, and saddle grooves along the edges. The hat band must be free of defects and available in sizes 6 3/8 to 8 1/8 in 1/8 increments. Manufacturers must certify that the product meets these salient characteristics, conforms to their own specifications, and is commercially available, with the government reserving the right to require proof of conformance.

This U.S. Customs and Border Protection (CBP) document, CID7-1-03 CBPCBP-211, specifies the requirements for a leather shoulder strap to be worn by U.S. Border Patrol (USBP) and Air and Marine Operations (AMO) personnel. The strap must be a 1.25” wide adjustable black leather strap with polished brass hardware. Key characteristics include tapered end attachments for pivoting D-rings, saddle grooves along the edges, and two D-rings capable of accommodating a 2.25” duty belt. Made from cowhide leather, the strap must be free of defects and available in sizes 30-52. Manufacturers are required to certify that the product meets these specifications, conforms to their own quality standards, and is a commercially available item, with the Government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID7-1-04) for shoulder cords to be worn by Honor Guard personnel in Air and Marine Operations (AMO), U. S. Border Patrol (USBP), and the Office of Field Operations (OFO). These braided cords are designed for ceremonial use, featuring a 30-inch braided loop and a button loop at the top, without tips or aiguillettes, and must meet MIL-S-11874D requirements. Made from 1/4” braided tubular nylon, the cords come in specific colors: brown for AMO, gold for USBP, and white for OFO. They are available in one size and must be free of defects, with manufacturers certifying compliance with these specifications.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specification for a leather chin strap, designated as CBPOBP-129. It details the requirements for a 3/8-inch wide, adjustable chin strap made from plain black cowhide leather with polished brass hardware, including a buckle and keeper. The specification mandates that the chin strap be free of defects and available in one size fits all. Manufacturers must certify that their product meets these salient characteristics and conforms to their own commercial quality assurance practices, with the Government reserving the right to verify conformance before delivery. This document serves as a standard for procurement within federal government RFPs for USBP uniforms.

This U.S. Customs and Border Protection (CBP) commercial item description (CID) outlines the requirements for a leather Belt Keeper for male and female Office of Field Operations (OFO) personnel. The Belt Keeper must be a 1-inch wide, 8-inch long, double-thickness black leather strap with double snaps spaced one inch apart. A key design requirement is that the top surface of the female snaps must be hidden between the belt layers, ensuring no snaps are visible when mounted. The manufacturer must certify that the product meets these salient characteristics, conforms to their own specifications, and is commercially available. The government retains the right to request proof of conformance before delivery.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for a nylon belt keeper to be used by personnel in the U.S. Border Patrol (USBP) and Air and Marine Operations (AMO). This CID, identified as CBPCBP-048, outlines the specific requirements for the belt keeper. The belt keeper must be a 1-inch wide nylon strap with double snaps, made from an 8-inch long, 1-inch wide nylon web. It must feature two flat black metal snaps, spaced one inch apart, with rounded ends on the webbing. The color of the belt keeper must be black, and it will be available in one size only. Each pack is required to contain four belt keepers. Manufacturers must certify that the product meets these salient characteristics, conforms to their own drawings and quality assurance practices, and is identical to products sold commercially. The government reserves the right to request proof of conformance before delivery.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a Credential Case, designated as CBPCBP-037. This commercial item description details the requirements for a leather, wallet-sized badge and identification holder for male and female personnel across the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). Key characteristics include a side-opening wallet with turned edging and square corners, two framed window ID holders accommodating IDs up to 2 7/8” x 4 5/8”, and a badge cutout. The case must be made of plain black leather, be one-size-fits-all, and free of defects. Manufacturers are required to certify that the product meets these specifications and conforms to their own quality assurance practices, with the Government reserving the right to verify conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a leather D-Ring, designated as CBPCBP-061. This specification covers requirements for male and female personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). The D-Ring is a 1-inch wide black leather belt hanger with a brass D-ring for shoulder strap attachment and a single brass snap closure, designed to accommodate a 2.25-inch duty belt. Manufacturers must certify that the product meets these salient characteristics, conforms to their own standards, and is sold commercially. The government reserves the right to require proof of conformance before delivery.

This document, CID7-2-09, outlines the U.S. Customs and Border Protection's (CBP) Air and Marine Operations (AMO) uniform specification for a Helmet Liner. The helmet liner is a low-profile item designed to absorb perspiration for both male and female personnel. Key characteristics include a four-panel design for an improved fit, flat lock stitches, and a bias tape finished edge, ensuring it fits under a flight helmet without wrinkles. The material required is an 85% polyester/12% spandex/3% X-Static® or equivalent fabric, in a light grey color. It must be available in Small/Medium and Large/Extra Large sizes and be free of defects. Manufacturers must certify that the product meets these specifications and is commercially available, with the Government reserving the right to verify conformance.

This U.S. Customs and Border Protection (CBP) document specifies requirements for High Visibility Drop Down Panels to be worn by personnel in the Office of Field Operations (OFO), Air and Marine Operations (AMO), and USBP. These fluorescent yellow, removable panels for the 3-Way Insulated jacket identify personnel as a CBP FEDERAL OFFICER or CBP FEDERAL AGENT. Each set includes one large (15”x8”) and two medium (8”x5”) panels, all with a 1” loop closure. Customizations include reflective silver bold lettering specifying “CBP FEDERAL OFFICER” for OFO, “CBP AIR & MARINE FEDERAL AGENT” for AMO, and “CBP BORDER PATROL FEDERAL AGENT” for USBP, with precise letter sizes and widths detailed for both large and medium panels. The panels are made from double-layer 100% polyester twill fabric, with reflective silver screen-printed letters on a fluorescent yellow (chartreuse) background. Manufacturers must certify that the product meets these characteristics and conforms to commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) commercial item description (CID7-2-11) outlines the requirements for a lightweight, black neck gaiter for male and female personnel of the U.S. Border Patrol (USBP) and Air Marine Operations (AMO). The gaiter must be made of a thin, four-way stretch, 100% polyester eyelet mesh knit fabric, weighing 4.0 oz/yd², with UPF 35+ protection, moisture-wicking, and an antimicrobial finish. It should be one-size-fits-all (10” x 10”), free of defects, and contain no external branding except for a subdued ¼ inch high "DHS" branding silk-screened vertically along the mid-right side seam. The material must be machine washable and meet specific colorfastness standards for laundering, light, crocking, and perspiration. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards.

The U.S. Customs and Border Protection Office of Field Operations (OFO) has issued a commercial item description (CID7-2-12) for a High Visibility LEI Rapid Response Vest. This vest, intended for both male and female personnel, is fluorescent yellow with a 4-inch gray reflective strip displaying “POLICE” in 10 7/8” wide and 2 15/16” high lettering on both the front and back. Key features include rapid donning and adjustment, 1/4” black trim, and two 28” adjustable shoulder straps with plastic hooks. Made from polyester fabric, the vest is available in one size and must be free of defects. Manufacturers are required to certify that the product meets these specifications and commercial marketplace standards. The document also includes internal approvals and communications regarding the specification's review and sign-off.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for a Heavyweight Neck Gaiter, Black, for personnel of the U.S. Border Patrol (USBP) and Air Marine Operations (AMO). This one-size-fits-all, non-flame resistant neck accessory is designed to protect users from conditions below 30°F. Key features include a fleece material next to the skin, UPF 50+ protection, moisture-wicking properties, an antimicrobial finish, and subdued ¼ inch high “DHS” branding. The gaiter is made from an 87% polyester and 13% elastomeric fiber fabric, weighing 8.0 oz/yd², and is machine washable. It must be black, measure 10” x 10”, and be free of defects. Manufacturers must certify that the product meets the specified characteristics and conforms to commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID7-2-23) for attachment straps, specifically for utility/dump pouches (CBPCBP-362). These straps are for male and female personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). The straps are designed to attach pouches to other equipment.Key specifications include ¾ inch matte black nylon webbing, finishing at a 3-inch closed loop length, and featuring a plastic gripping slide adjuster for one-handed disengagement. The material must be high-tensile strength nylon with a grime-resistant finish and sewn with high-tensile composite nylon thread. The straps are supplied in packs of four. Manufacturers must certify that the product meets salient characteristics and commercial marketplace standards. The document includes review and approval signatures from various CBP and UMC personnel, ensuring accuracy and consistency with other specifications.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for clip-on neckties for male and female U.S. Border Patrol (USBP) personnel. The specification, CID7-4-02 (a-b), details requirements for a navy-colored tie available in 18-inch (CBPOBP-215) and 20-inch (CBPOBP-216) lengths. Key characteristics include a full Windsor knot with a dimple, full lining, a 3-inch bottom width, three buttonholes, and a fold-down clip-on attachment. The ties must be made from an 11.5 osy material composed of 75% polyester and 25% wool, matching FED-STD 595C color chip 35044. Manufacturers must certify that their product meets these specifications and is commercially available, with the government reserving the right to verify conformance. Workmanship must be free of defects such as holes, tears, or uneven dyeing.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for clip-on neckties for male and female personnel of the Office of Field Operations (OFO). The ties must be black, made from an 11.5 osy, 75% polyester/25% wool blend, and feature a full Windsor knot with a dimple, full lining, a 3-inch bottom width, three buttonholes, and a fold-down clip-on attachment. Available in 15-inch (CBPOFO-108), 18-inch (CBPOFO-109), and 20-inch (CBPOFO-110) lengths, the ties must be free of defects. Manufacturers must certify that the product meets these salient characteristics, conforms to their own specifications, and is commercially available, with the Government reserving the right to verify conformance before delivery.

This document, CID7-4-04, is a U.S. Customs and Border Protection Uniform Specification for a Clip-on Neck Tie, XL, Black, designated CBPOFO-103. It outlines requirements for the necktie to be worn by male and female personnel of the Office of Field Operations (OFO). Key specifications include a 3.5-inch width, 22-inch length, a full Windsor knot with a dimple, full lining, three buttonholes, and a fold-down clip-on neck attachment. The material must be 11.5 osy, 75% polyester/25% wool, and black in color. The document emphasizes workmanship, requiring the tie to be free of defects. Manufacturers must certify that the product meets these salient characteristics and conforms to their own commercial standards, with the government reserving the right to verify conformance.

This U.S. Customs and Border Protection (CBP) commercial item description (CID) outlines the specifications for a clip-on necktie for Air and Marine Operations (AMO) personnel. The necktie must be brown, 100% polyester, and available in 15-inch (CBPOAM-305), 18-inch (CBPOAM-306), and 20-inch (CBPOAM-307) lengths. Key features include a full Windsor knot with a dimple, full lining, a 3.25-inch bottom width, and a fold-down clip-on neck attachment. Manufacturers must certify that the product meets these salient characteristics, conforms to their own quality assurance practices, and is commercially available, with the government reserving the right to request proof of conformance before delivery. The document also stipulates that the necktie must be free of defects such as holes, tears, or uneven dyeing.

The U.S. Customs and Border Protection, Air and Marine Operations (AMO), requires a specific uniform necktie. This commercial item description outlines the requirements for a clip-on necktie, XL, brown (CBPOAM-333), to be worn by both male and female personnel. The tie must be 3.5” wide and 22” long, featuring a full Windsor knot with a dimple and a fold-down clip-on attachment. It must be fully lined and include three buttonholes. The material specified is 100% polyester wool in a brown color (FED-STD 595C). Manufacturers must certify that the product meets these salient characteristics, conforming to their own quality assurance practices and being identical to products sold commercially. The government reserves the right to verify conformance before delivery, ensuring the necktie is free from defects like holes, tears, or uneven dyeing.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description for a unisex Rescue Rigger Belt, 1.75-inch, nylon, designated CBPCBP-036. This specification outlines the requirements for belts to be worn by personnel from the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). Key characteristics include construction from 1.75-inch nylon webbing with a 7,000 lb tensile strength, utilization of PIA-H-7195 certified hardware such as a PS22040-2 quick-fit buckle and a PS22020-2 V-ring, both proof-load tested to 2,500 lbs and in a matte black finish. The belt must be sewn with #5 cord, use hook and loop to secure the running end, and be certified to MIL-STD-858. The color is specified as black, and sizing ranges from Small (28-34 inches) to Large (42-51 inches). Manufacturers must certify that the product meets all salient characteristics and conforms to their own standards and quality assurance practices, with the Government reserving the right to require proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a 2.25-inch leather duty belt for Air and Marine Operations (AMO) personnel. The belt, designated CBPOAM-224, Unisex, is a Sam Browne-style black leather belt with four-row stitching. Key features include a 2.25-inch wide stiffened leather body, a double-tongued polished brass buckle, a center belt stud, two buckle retention slots, and an exterior belt keeper. It is suitable for wear with ceremonial/dress uniforms and is available in sizes 28-52. Manufacturers must certify that the product meets these specifications and conforms to their commercial marketplace standards, with the government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID7-5-05, for a 2.25-inch leather duty belt. This specification covers requirements for male and female personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The belt must be a 2.25-inch Sam-Browne style, made of stiffened black leather with a plain finish, and feature four-row stitching. Key characteristics include two hooks for a double-tongued brass buckle, a center belt stud, and an exterior belt keeper. The belt must be suitable for ceremonial/dress uniforms and available in sizes 28-52. Manufacturers must certify that their product meets these salient characteristics and conforms to their own quality standards, reserving the government's right to verify conformance prior to delivery.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specifications for a 2.25-inch female leather duty belt for the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The belt must be a black, plain finish, stiffened leather, Sally Browne style with four-row stitching, a double-tongued polished brass buckle, two hooks, a center belt stud, and an exterior belt keeper. It is ergonomically tapered for an improved fit and suitable for ceremonial/dress uniforms. It is available in right-hand (CBPCBP-057) and left-hand (CBPCBP-059) versions, in sizes 24-44. Manufacturers must certify that the product meets these salient characteristics and conforms to their own standards and quality assurance practices, ensuring it is a commercial marketplace product. The government reserves the right to require proof of conformance before delivery.

The U.S. Customs and Border Protection Office of Field Operations (OFO) has issued a commercial item description for a River Belt, designed for both male (CBPOFO-119) and female (CBPOFO-122) personnel. This specification outlines requirements for a 2.25-inch river or ranger-style leather belt with a 1.25-inch billet and a brass buckle. Key characteristics include a stiffened leather construction, interior and exterior belt keepers, and a 1.25-inch hook strip on the inside. Female belts are specifically designed with ergonomic tapering for enhanced comfort. The belt must be black with a plain finish. Sizing ranges from 28-56 for males and 24-46 for females. Manufacturers are required to certify that their product meets these specifications and conforms to commercial marketplace standards, with the government reserving the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for leather trouser belts for male and female Office of Field Operations (OFO) personnel. The belts, designated CBPOFO-118 for males and CBPOFO-121 for females, must be 1.5 inches wide, made of leather or synthetic leather, black, and reversible. Key features include a hook-and-loop closure for sizing, rounded ends, and the absence of a buckle. Female belts are specifically designed with an ergonomic taper for enhanced comfort. The document provides detailed sizing charts for both genders, ranging from Extra Small to 4 Extra Large for males and Extra Small to Extra Large for females. Manufacturers are required to certify that their products meet these specifications, conform to their own quality standards, and are commercially available. The government retains the right to request proof of conformance before delivery.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description, CBPCBP-113, for a 1.5-inch leather Inspector Belt. This specification outlines the requirements for belts to be worn by male and female personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The belt must be made of black leather with a plain finish, feature a 1.5-inch width, and utilize a square-shaped polished brass buckle, along with a matching leather belt keeper. Sizes will range from 24 to 58. Manufacturers must certify that their product meets these salient characteristics and conforms to their own quality assurance practices, ensuring it is the same product sold commercially. The government reserves the right to request proof of conformance before delivery.

This U.S. Customs and Border Protection (CBP) document, CID7-5-11, outlines the uniform specification for a 1.5-inch leather belt with a hook and loop closure. This belt is intended for male and female personnel within the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). Key specifications include a plain black leather finish, 1.5-inch width, and an adjustable hook and loop closure system. The belt must be free of defects and available in sizes 28-52. Manufacturers are required to certify that their product meets these salient characteristics, conforms to their own standards, and is commercially available. The Government reserves the right to verify conformance before delivery.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a 1.5-inch nylon trainer belt, designated CBPOAM-212, for Air and Marine Operations (AMO) and U.S. Border Patrol (USBP) personnel. The belt must be black, made of 1.5-inch nylon webbing with a sealed tab to prevent fraying, and feature a polymer or non-rusting metal buckle for adjustment. Available in regular (24-36 inches), large (36-46 inches), and extra-large (46-54 inches) sizes, the belt must be free of defects. Manufacturers are required to certify that the product meets these salient characteristics and conforms to their commercial quality standards, with the government reserving the right to verify conformance before delivery.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification (CID7-5-13) for a 2.25-inch black nylon duty belt. This specification outlines the requirements for a lightweight, durable duty belt for male and female personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). Key features include a 5-part laminate construction with an internal polymer stiffener, closed-cell foam layers, a ballistic weave fabric exterior, and a 3-point locking, shatter-resistant polymer buckle. The entire inside face of the belt must be lined with loop fastener. The belt will be available in six sizes ranging from 24 to 58 inches. Manufacturers must certify that their product meets these salient characteristics and conforms to their own quality assurance practices, with the government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID7-5-14, for a 1.5-inch nylon inner liner belt. This belt is designed for unisex wear by personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). Key characteristics include black 1.5-inch nylon webbing, hook-and-loop closure for adjustment and security, and hook fasteners on the exterior to adhere to duty belts. The specification details various sizing options from Extra Small (24-28 inches) to XXX-Large (56-64 inches). Manufacturers must certify that their product meets these salient characteristics, adheres to their own quality standards, and is commercially available. The government reserves the right to verify conformance before delivery. The document also includes revision history and approvals from CBP uniform liaisons, ensuring accuracy and consistency with other approved specifications.

The U.S. Customs and Border Protection Office of Field Operations (OFO) has issued a commercial item description for a leather handcuff pouch. This document outlines the requirements for a black leather handcuff holder designed for male and female OFO personnel. Key specifications include construction from semi-rigid black leather, ambidextrous design, a cover flap with a hidden snap closure, and sizing to fit most handcuff styles and a standard 2 ¼” duty belt via a slide-on attachment. The pouch must be free of defects and sewn with matching thread. Manufacturers are required to certify that their product meets these salient characteristics and conforms to their own commercial marketplace standards, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification (CID7-6-03) for a Slide-On Leather Handcuff Pouch for the U.S. Border Patrol (USBP) and Air and Marine Operations (AMO) personnel. This commercial item description outlines requirements for a black, belt-worn leather handcuff holder with a slide-on attachment and a brass snap closure. Key characteristics include leather construction, sizing for most handcuff styles, an ambidextrous design, a fixed loop attachment to fit a standard 2 ¼” duty belt, and a semi-rigid material. The pouch must be plain black, one-size-fits-all, and free of defects. Manufacturers are required to certify that their product meets these specifications and is commercially available, with the government reserving the right to request proof of conformance.

This U.S. Customs and Border Protection uniform specification outlines requirements for double magazine pouches for the Office of Field Operations, U.S. Border Patrol, and Air and Marine Operations personnel. The document details three types: the discontinued CBPCBP-047, the CBPCBP-322 for Glock 19 or 47 magazines, and the open-pouch CBPCBP-361. All pouches must be black nylon, ambidextrous, capable of horizontal or vertical wear, fit a 2 ¼” duty belt, and utilize a slide-on attachment. Specific material characteristics vary by model, with CBPCBP-322 and CBPCBP-361 featuring advanced trilaminate construction. Manufacturers must certify their products meet these salient characteristics and conform to commercial marketplace standards. The specification emphasizes quality workmanship and outlines key changes, including the addition of new models and the discontinuation of an older one.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a uniform specification for a black leather double magazine holder. This holder is designed for both male and female personnel to carry two magazines on a standard 2 ¼” duty belt. It must be constructed from leather and/or synthetic materials, feature individual rigid compartments with hidden snap closures, and be ambidextrous, allowing for horizontal or vertical wear. The specification includes two versions: CBPOFO-223 for H&K P2000 magazines and CBPOFO-339 for Glock 19 magazines, with the latter replacing the former. The holder must have a plain black finish, be free of defects, and be certified by the manufacturer to meet all salient characteristics and quality assurance practices. The document was reviewed and approved in March 2021.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a black leather or synthetic double magazine holder for the Office of Field Operations (OFO). The holder must accommodate two magazines in individual rigid compartments with snap-secured cover flaps, be ambidextrous, and capable of horizontal or vertical wear on a standard 2 ¼” duty belt. Specific sizing is required for H&K P2000 and Glock 19 magazines. The material should be semi-rigid synthetic with a leather cover flap, in a plain black finish, and free of defects. Manufacturers must certify that their product meets these salient characteristics and conforms to their own quality standards, identical to those sold commercially. A recent revision updated the Glock 19 model to CBPOFO-339.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for a black leather double magazine pouch for U. S. Border Patrol (USBP) and Air and Marine Operations (AMO) personnel. This commercial item description, identified as CID7-6-07(a-b), details requirements for a duty belt-worn pouch designed to hold two magazines. Key characteristics include construction from leather and/or synthetic materials, individual rigid compartments with snap-secured cover flaps, ambidextrous design, and the ability to be worn horizontally or vertically. The pouch must have a black plain finish, utilize a slide-on attachment, and fit a standard 2 ¼” duty belt. Specifically, model CBPCBP-095 must accommodate H&K P2000 or Glock 19 magazines, while CBPCBP-330 is sized for Glock 47 magazines. Manufacturers are required to certify that their product meets these specifications and their own quality assurance practices. The document also notes an update from February 2021, adding Glock 19 and Glock 47 compatibility to the description.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification (CID7-6-08) for a single magazine pouch. This commercial item description outlines the requirements for a leather, open-top, single magazine holder for male and female personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). Key characteristics include leather construction, sizing for one H&K USP 40C magazine, friction retention, ambidextrous wear, a black plain finish, a slide-on belt attachment, and compatibility with a standard 1½” duty belt. The pouch must be made of semi-rigid leather, be black, one-size-fits-all, and free of defects. Manufacturers must certify that their product meets these specifications and is commercially available.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for a nylon flashlight pouch (CBPCBP-049, Black). This specification outlines the requirements for a duty belt-worn flashlight pouch for male and female personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). Key characteristics include construction from semi-rigid woven nylon (e.g., Cordura®), sizing for Streamlight® or Surefire® flashlights, a cover flap with two adjustable snaps, vertical and ambidextrous carry, a black woven finish, and a slide-on attachment compatible with a standard 2 ¼” duty belt. The pouch must be one-size-fits-all and free of defects. Manufacturers are required to certify that the product meets these salient characteristics and conforms to their own commercial standards.

The U.S. Customs and Border Protection (USBP) has issued a commercial item description (CID7-6-10) for a Stinger® Flashlight Pouch, Nylon (CBPOBP-155, Black). This specification outlines the requirements for a duty belt-worn, ambidextrous, black woven nylon pouch designed to carry Streamlight® Stinger® flashlights. Key characteristics include semi-rigid woven nylon construction (e.g., Cordura®), a snap closure on the cover flap, vertical carry capability, and a slide-on attachment system compatible with standard 2 ¼” duty belts. The pouch must be free of defects and sewn with matching thread. Manufacturers are required to certify that the product meets these specifications, conforms to their own quality assurance practices, and is identical to products sold commercially, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for a nylon key ring holder. This CID, identified as CBPCBP-051, Black, outlines the specifications for a duty belt-worn key ring holder for personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). Key requirements include construction from semi-rigid woven nylon (e.g., Cordura®), a 1.25” OD key ring on a web loop with snap closure, a hook and loop closure on the cover flap, vertical carry, ambidextrous design, black woven finish, and a slide-on attachment fitting a standard 2 ¼” duty belt. The holder must be one-size-fits-all, free of defects, and sewn with matching thread. Manufacturers must certify that their product meets these salient characteristics and is a commercially available item, with the government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description for a leather belt keeper to be worn by personnel from the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). This specification outlines the requirements for a black, plain-finish leather belt keeper, 7.25 inches long and 7/8 inches wide, with two brass snap closures spaced one inch apart. It must fit a standard 2 ¼-inch duty belt and be free of defects. Manufacturers are required to certify that the product meets these characteristics and conforms to their own quality standards, being the same product sold commercially.

This document outlines the U.S. Customs and Border Protection's (CBP) Office of Border Patrol (OBP) uniform specification for a nylon glove pouch. The specification, CBPOBP-259, details the requirements for a black, nylon belt pouch designed to carry at least two pairs of nitrile/latex gloves. Key characteristics include a hook-and-loop closure, construction from 100% nylon fabric, and sizing to fit a standard 2 ¼” duty belt. The pouch must be matte black and free of defects, with matching thread for seams. Manufacturers are required to certify that the product meets these specifications and conforms to their own commercial quality assurance practices, with the Government reserving the right to verify conformance.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for a Multipurpose Sheath for Office of Field Operations (OFO) and U.S. Border Patrol (USBP) personnel. The sheath is designed to hold multiple items like folding knives, multi-tools, and flashlights, available in dual or quad compartments. Key features include adjustable compartments with tensioners and hook-and-loop secured cover flaps, and adaptability for belt or MOLLE vest wear with horizontal or vertical orientation. Made from semi-rigid woven nylon, it comes in black (CBPCBP-260, CBPCBP-261) or green (CBPOBP-304, CBPOBP-305) and is one-size-fits-all. Manufacturers must certify that the product meets these specifications, conforms to their own quality standards, and is commercially available, with the Government reserving the right to verify conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a black baton scabbard, designated for personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). The scabbard is an adjustable polymer holder designed to be worn on a duty belt or vest. Key requirements include construction from rigid polymer, availability for 16-inch, 21-inch, and 26-inch Friction Loc batons (CBPCBP-273, CBPCBP-274, CBPCBP-275 respectively), adjustable retention, ability to retain both retracted and extended batons, rotatable carry from horizontal to vertical, slide-on belt attachment, and adjustable fit for various belt widths or vest webbing. It must have a smooth textured black finish and be free of defects. Manufacturers are required to certify that the product meets these salient characteristics and conforms to their own commercial standards.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification (CBP7-6-19) for a Nylon Covered Handcuff Pouch. This document outlines the requirements for a commercial item to be worn by male and female personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). The pouch must be black, constructed from AccuMold® (or equivalent) trilaminate with a ballistic weave exterior and Coptex™ (or equivalent) lining, and sized to hold one pair of standard chain handcuffs. It must be ambidextrous, utilize a slide-on attachment for a 2 ¼” duty belt, and be free of defects. Manufacturers are required to certify that their product meets these salient characteristics and conforms to their own quality assurance practices, ensuring it is the same product sold commercially.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for a nylon chemical agent spray pouch. This pouch is designed for personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). Key characteristics include construction from AccuMold® or equivalent material with a ballistic weave finish, sizing for MK-2 and MK-3 chemical agent spray canisters, vertical carry, a hidden snap closure, black color, and a slide-on attachment for a standard 2 ¼” duty belt. The material must be a molded and contoured trilaminate with a Coptex™ or equivalent lining. Manufacturers must certify that the product meets these specifications and is commercially available, with the government reserving the right to verify conformance. The document was created in February 2021 and reviewed for accuracy and consistency.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for a nylon radio pouch for personnel in the Office of Field Operations, U.S. Border Patrol, and Air and Marine Operations. The pouch, designated CBPCBP-324, Black, is designed to be worn on a duty belt and features AccuMold® or equivalent trilaminate construction with a ballistic weave exterior and Coptex™ or equivalent lining. It is sized to fit most hand-held radios, includes an elastic retention lanyard with snap closure, and has a two-piece adjustable swivel base. The pouch must be removable without unfastening the belt, fit a standard 2 ¼” duty belt, and be black with a ballistic weave finish. Manufacturers must certify that the product meets these salient characteristics and quality standards.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for a leather Chemical Agent Spray Pouch for the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). The pouch is designed to hold an MK3 OC chemical agent spray canister, be worn vertically on a standard 2 ¼” duty belt, and feature a slide-on attachment. Key characteristics include semi-rigid black leather construction, ambidextrous design, and a plain black finish. Two specific models are detailed: CBPCBP-350 with a visible brass snap and tooled groove border, and CBPOFO-352 with a hidden snap and sewn edge. Manufacturers must certify that the product meets these specifications and commercial marketplace standards. The document includes internal reviews and approvals by CBP personnel, ensuring accuracy and consistency.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for a nylon utility/dump pouch, designated CBPCBP-362, Black, for use by personnel in the Office of Field Operations (OFO), U.S. Border Patrol (USBP), and Air and Marine Operations (AMO). This commercial item description details requirements for a matte black, duty belt-worn pouch designed to hold seven M4 30-round magazines. Key characteristics include 100% nylon construction with a water-resistant coating, hook and loop closure, snag-free elastic shock cord, and various attachment points. The pouch has specified folded and unfolded dimensions and must meet high workmanship standards with reinforced stress points. Manufacturers must certify that the product meets salient characteristics, conforms to their own specifications, and is commercially available. The document outlines regulatory compliance and includes signatures from various CBP and Uniform Management Center (UMC) liaisons, affirming its accuracy and consistency.

This U.S. Customs and Border Protection (CBP) commercial item description (CID) outlines the requirements for a Black Plastic Double Magazine Pouch (CBPCBP-965) for U.S. Border Patrol (USBP) personnel. The pouch must be a hard plastic, open-style holder worn on a 2 ¼” duty belt, capable of carrying two 9mm magazines in individual, rigid, ambidextrous compartments. Key characteristics include a smooth, low-gloss, scuff-resistant black finish, a slide-on attachment, and an adjustable tension screw. The material must be hardened plastic, free of per- or polyfluoroalkyl substances (PFAS), and free of defects. Manufacturers must certify that the product meets these specifications and is commercially available.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for Retention Duty Holsters for personnel in the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). This commercial item description outlines requirements for a lightweight, belt-mounted duty holster with one level of weapon retention. Key characteristics include compatibility with H&K P2000 and Glock 23 handguns, a manually operated retention system, rigid construction (leather or injection-molded polymer), enclosed trigger guard, and non-marking material. The holster must be compatible with 1.75” duty belts, available in right and left-hand draws, and approved by the OTD, Use of Force Center of Excellence. The color and finish shall be natural leather or high-shine/glossy black. Manufacturers must certify that their product meets these specifications and commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) document, CID7-7-06, outlines the specifications for a Level III Retention Dress/Duty Holster for Office of Field Operations (OFO) personnel. The holster must be a lightweight, mid-ride, belt-mounted model with three levels of weapon retention: adjustable passive friction, a thumb-activated rotating hood, and an automatic internal locking system. It must be compatible with H&K P2000 (CBPOFO-239) and Glock 19 (CBPOFO-331 & CBPOFO-332) handguns, available in both right and left-hand draws, and fit 2" to 2.25" duty belts. Key characteristics include enclosing the trigger guard, retaining shape and function between -50°F and 200°F, not marking the weapon's finish, and being submersible. The holster's basic material should be molded polymer with a simulated leather finish, maintaining integrity between -25°F and 150°F. Color options are matte black for CBPOFO-239 and CBPOFO-331, and high gloss black for CBPOFO-332. The manufacturer must certify compliance with these specifications, and the product requires approval from the OTD, Use of Force Center of Excellence.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for Level I/II Dress/Duty Retention Holsters. These holsters are designed for male and female personnel across the Office of Border Patrol (OBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). The specification details requirements for mid-ride, open-top holsters with internal retention systems, compatible with H&K P2000, Glock 19, and Glock 47 handguns, with or without lights. Key characteristics include right or left-hand draw options, one or two levels of automatic retention (utilizing a single thumb motion for disengagement, with Level II adding a movable cover), and compatibility with 2-inch to 2.25-inch duty belts. The holsters must be constructed from a rigid nylon blend material, maintain shape and performance between -500 and 3000 degrees, be submersible, and not scratch weapon finishes. Color specifications vary: most are matte black, while the CBPOFO-330 for Glock 19 is high gloss black. Manufacturers must certify adherence to these specifications and commercial standards.

This document, CID7-7-08 (a-f), details the specifications for Level I/II Dress/Duty Holsters for U.S. Customs and Border Protection (USBP) personnel. The holsters must be lightweight, belt-mounted, and offer one or two levels of weapon retention. Key characteristics include compatibility with H&K P2000/P2000SK with light, Glock 19/19 with light, and Glock 47/47 with light handguns. They must be available in mid-ride and low-ride options, for both right and left-hand draw, and in matte black textured or simulated synthetic leather grain finishes. The holsters require an internal retention system disengaged by a single thumb motion, with a Level II option adding a movable cover. They must be compatible with 2” to 2.25” duty belts, feature an open-top design, and fully enclose the trigger guard. Constructed from molded polymer, the holsters must retain shape and function between -25° and 150° Fahrenheit, be submersible, and not mark the weapon's finish. Certification from the manufacturer confirming adherence to these specifications and commercial marketplace standards is required, with government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for Duty Holster Drop Adapters, specifically models CBPCBP-230 (Low-Ride) and CBPCBP-337 (Mid-Ride). These adapters are for male and female personnel in the U.S. Border Patrol, Office of Field Operations, and Air and Marine Operations. Key requirements include a plain black finish, ambidextrous use, rigid injection-molded polymer composite construction, compatibility with 2.25-inch duty belts and Safariland holsters with a three-hole attachment, and approval from the OTD Use of Force Center of Excellence. The low-ride adapter provides a 1.5-inch drop, while the mid-ride adapter offers a neutral pistol butt position. Manufacturers must certify that their products meet these characteristics and conform to commercial marketplace standards. This document, reviewed and approved by CBP uniform liaisons, ensures standardized, high-quality equipment for border security personnel.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for a concealable, outside-the-waistband (OWB) retention holster for U.S. Border Patrol (USBP) personnel. The holster must be a lightweight, pancake-style design with a single level of automatic weapon retention, compatible with Glock 19, 26, and 47 handguns for both right and left-hand draw. Key characteristics include a low-profile, belt-worn, open-top concealment design, a single-finger release retention system, and an enclosed trigger guard. The holster must maintain its shape and function between -250 and 1500 degrees Fahrenheit, be constructed from a molded thermoplastic polymer that won't scratch the weapon, be submersible in water without degradation, and be approved by the OTD, Use of Force Center of Excellence. The color and finish must be matte black, free of defects, and manufacturers must certify that the product meets these salient characteristics and conforms to their own quality assurance practices.

U.S. Customs and Border Protection (USBP) requires concealable, outside-the-waistband (OWB) retention holsters for its male and female personnel. These Level I retention holsters must be lightweight, pancake-style, and compatible with Glock 19, 26, and 47 handguns, available in both right and left-hand draws. Key features include a thumb break for retention, three belt slots allowing 15 or 25 degrees of cant, and construction from molded black leather. The holster must fully enclose the trigger guard when the handgun is secured, accommodate belts up to 1.75 inches, and be approved by the OTD, Use of Force Center of Excellence. Manufacturers must certify that their product meets these specifications and commercial quality standards.

The U.S. Customs and Border Protection's Air and Marine Operations (AMO) requires a concealable, inside-the-waistband (IWB) appendix carry retention holster for male and female personnel. This commercial item description, CID7-07-15, outlines the specifications for a Level I retention holster compatible with a Glock 19. Key characteristics include a low-profile, belt-worn design specifically for appendix carry, available in both right-hand and left-hand draw. The holster must provide a single level of automatic adjustable retention, utilize a camming bar, and feature two metal belt attachment clips accommodating 1” to 1.75” belts with adjustable ride height. The trigger guard must be enclosed when the handgun is secured. Constructed from a molded thermoplastic polymer, the holster must retain its shape and operate properly between -250 and 1500 degrees, be submersible without degradation, and not mark the weapon's finish. The color must be plain matte black, free of defects, and approved by the OTD, Use of Force Center of Excellence. Manufacturers must certify conformance to these salient characteristics and their own quality standards.

The U.S. Customs and Border Protection, Air and Marine Operations (AMO), requires concealable Outside the Waistband (OWB) retention holsters for male and female personnel. These holsters must be lightweight, low-profile, and compatible with Glock 19 and Glock 47 handguns, including those with mounted lights. Key features include a single level of automatic adjustable retention, universal compatibility with handgun lights, and two integrated belt attachment slots for 1.5” belts. The trigger guard must be enclosed when the weapon is secured. Constructed from molded thermoplastic polymer, the holsters must retain shape and function between -25° and 150° Fahrenheit, be submersible, and not scratch the weapon's finish. They must be plain matte black, defect-free, and approved by the OTD, Use of Force Center of Excellence. Manufacturers must certify compliance with these specifications.

This document outlines the U.S. Customs and Border Protection's (CBP) Air and Marine Operations (AMO) specifications for a concealable Outside the Waistband (OWB) Retention Holster. The holster, designated CBPOAM-283, is for the Glock 19 handgun and must be lightweight, concealable, and provide a single level of automatic adjustable retention. Key features include compatibility with Glock 19, availability in right-hand and left-hand draw, 10 degrees of forward cant, integrated belt slots for 1.5” belts, and an enclosed trigger guard. It must maintain structural integrity and operational performance between -250 and 1500 degrees, be submersible, and not mark the weapon’s finish. Constructed from a molded thermoplastic polymer, the holster must be matte black, defect-free, and approved by the OTD, Use of Force Center of Excellence. Manufacturers must certify compliance with these specifications.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID7-7-21 (a-b), for a Holster Quick Locking System (QLS) to be worn by personnel from the U.S. Border Patrol (USBP), Office of Field Operations (OFO), and Air and Marine Operations (AMO). This system includes a Receiver Plate (CBPCBP-335) and a Holster Fork (CBPCBP-336), both constructed of injection-molded nylon with a plain black finish. Key requirements include rigidity, quick transfer of gear, compatibility with Safariland holsters and Universal Belt Loop Attachments (for the Receiver Plate), and the ability to pass a Level I Retention pull test. The system must also be approved by the OTD, Use of Force Center of Excellence. Manufacturers must certify that their products meet these specifications and conform to commercial marketplace standards.

The U.S. Customs and Border Protection's Air and Marine Operations (AMO) has issued a commercial item description (CID) for a Level 1 Duty Holster (CBPOAM-246). This CID outlines the requirements for a lightweight, belt-mounted, strong-side duty holster with a safe and efficient detachment system for male and female AMO personnel. Key features include compatibility with Glock 47, 19, and 26 handguns, availability in right and left-hand draws, an intuitive thumb release, and a self-locking mechanism. The holster must be constructed from a molded polymer composite like rigid nylon, accept weapons with or without red dot sights and lights, and be submersible in water without degrading. It must also retain its shape and operate properly between -25°F and 150°F. The color and finish must be matte black, and the manufacturer must certify that the product meets all specified salient characteristics and material requirements.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for Holster Kits for male and female personnel. The document details three specific kits: CBPCBP-338 for Glock 19, CBPCBP-345 for Glock 19 with light, and CBPCBP-349 for Glock 47 with light. Each kit includes a holster (various configurations), a Low-Ride Adapter, a Mid-Ride Adapter, and a Quick Locking System (fork and two receiver plates). All components must be black and free of defects. Manufacturers are required to certify that their products meet the described characteristics, conform to their own specifications, and are identical to products sold commercially. The government reserves the right to request proof of conformance before delivery. The document also includes a version history, noting the addition of the Mid-Ride Adapter in a later revision.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description outlining the requirements for Holster Kits for male and female personnel. These kits, identified as CBPCBP-338 (Glock 19), CBPCBP-345 (Glock 19 w/Light), and CBPCBP-349 (Glock 47 w/Light), are available through the DHS Uniform Contract. Each kit must include a holster, a Low-Ride Adapter, a Mid-Ride Adapter, and a Quick Locking System (fork and two receiver plates). All components must be black and free of defects. Manufacturers are required to certify that their products meet these specifications, conform to their own quality assurance practices, and are identical to those sold commercially. The government reserves the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) uniform specification for the Aviation Specialist Badge Emblem. The badge is a fully embroidered patch, 3-3/4” tall x 2-3/4” wide, shield-shaped with an eagle above. It features the DHS seal,

This U.S. Customs and Border Protection (CBP) document outlines the uniform specifications for the Air and Marine Operations (AMO) Aviation Specialist Badge Emblem. The badge is a 3-3/4” tall x 2-3/4” wide fully embroidered patch in the shape of a shield with an eagle centered above. It features the Department of Homeland Security (DHS) seal,

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a uniform specification for a Federal Agent Badge Emblem. This embroidered patch, measuring 3-3/4” tall x 2-3/4” wide, is designed for male and female AMO personnel. It features a shield shape with an eagle, a screen-printed Department of Homeland Security (DHS) seal, and specific lettering including “U. S. CUSTOMS AND BORDER PROTECTION” and “FEDERAL AGENT” in various colors and sizes. The emblem is made of polyester fabric and thread, includes a black hook backing with a loop patch, and is required to be machine washable, resist fading, pilling, and fraying. Manufacturers must certify conformance to these specifications, with the Government reserving the right to verify compliance.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) requires a Federal Agent Badge Emblem, as detailed in specification CID8-1-04. This fully embroidered, badge-shaped patch measures 3-3/4” tall by 2-3/4” wide, featuring an eagle above a shield. The design includes a screen-printed, woven, or dyed Department of Homeland Security (DHS) seal, brown strips, and ribbon scrolls with specific lettering for “U. S. CUSTOMS AND BORDER PROTECTION” and “FEDERAL AGENT.” Constructed from polyester fabric and thread, the emblem incorporates a range of precise colors, including dark brown, metallic gold, white, and various shades for the DHS seal. It must have a tan hook backing with a corresponding loop patch, be machine washable, resist fading, pilling, and fraying, and be free of defects. Manufacturers are required to certify conformance to these salient characteristics. This document outlines the precise design and material specifications for a uniform component within the federal government.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) requires a Federal Agent Badge Emblem, as detailed in specification CID8-1-05. This fully embroidered patch, measuring 3-3/4” tall by 2-3/4” wide, is badge-shaped with an eagle above a shield. Key features include a screen-printed, woven, or dyed Department of Homeland Security (DHS) seal, various embroidered lettering (U.S., U.S. CUSTOMS AND BORDER PROTECTION, FEDERAL AGENT), a brown merrowed edge border, and a plastic backing. The emblem must be made of polyester fabric and thread, machine washable, and resistant to fading, pilling, and fraying. Specific Pantone colors are mandated for different elements, including dark brown, brown, metallic gold, white, bright yellow, light yellow, light orange, and black. Manufacturers must certify conformance to these salient characteristics, with the government reserving the right to request proof before delivery. The document outlines material, color, sizing, and workmanship requirements, ensuring a standardized emblem for AMO personnel.

This document, CID8-1-06, outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the U.S. Border Patrol (USBP) Badge Emblem. This fully embroidered patch, shaped like a shield with an eagle, is 3-3/8” tall x 2-3/8” wide. Key features include a centered Department of Homeland Security (DHS) seal, navy strips and ribbon scrolls, and specific gold and navy lettering. The emblem is made of polyester, is machine washable, and resistant to fading, pilling, and fraying. Manufacturers must certify conformance to these specifications, which detail material, color (Gold, Navy, Light Yellow, Light Orange, Bright Yellow), and workmanship requirements, ensuring a high-quality, standardized product for USBP personnel.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID8-1-07, detailing requirements for U.S. Border Patrol (USBP) Badge Emblems. These embroidered patches, sized 3-3/8” tall x 2-3/8” wide, feature a shield with an eagle and the Department of Homeland Security (DHS) seal. The specification outlines three versions: CBPCBP-257 (gold, tan hook), CBPOBP-296 (gold, green hook), and CBPOBP-388 (subdued green, black hook). Key characteristics include specific color schemes for standard and subdued emblems, uppercase lettering for “U S,” “CBP BORDER PATROL,” and “PATROL AGENT,” plastic backing, and hook-and-loop attachments. Made of polyester, the emblems must resist fading, pilling, and fraying, be machine washable, and free of defects. Manufacturers must certify conformance with these specifications, which were last updated in July 2023.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for a Badge Emblem for the U.S. Border Patrol (USBP) Special Operations Group (SOG). This document details the requirements for a partially embroidered patch with hook backing, to be worn by both male and female personnel. Key characteristics include its 3-3/8” tall x 2-3/8” wide badge shape, tan polyester fabric and embroidery, and uppercase brown lettering. The design features an eagle, a screen-printed/woven/dyed Department of Homeland Security (DHS) seal, and specific text: “U S” on either side of the DHS logo, “CBP BORDER PATROL” at the top of the shield, and “PATROL AGENT” across a ribbon. The emblem must be machine washable, resist fading, pilling, and fraying, and be free of defects. Manufacturers must certify conformance to these specifications.

This document outlines the uniform specifications for the U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) Badge Emblem. It details the requirements for four specific badge emblem models (CBPOFO-158, CBPOFO-316, CBPOFO-389, and CBPOFO-043), which are fully embroidered patches in the shape of a badge with an eagle. Key features include dimensions of 3-3/8” tall x 2-3/8” wide, a shield shape with an eagle facing left, a screen-printed Department of Homeland Security (DHS) seal, and specific black strips and ribbon scrolls. The emblems must be hot needle cut, machine washable, and resist fading, pilling, and fraying. Lettering, including “U. S. CUSTOMS AND BORDER PROTECTION” and “OFFICER,” will be uppercase white. Material characteristics specify polyester fabric with metallic gold and accent threads. Color requirements are precisely defined using Pantone codes. Models CBPOFO-158 and CBPOFO-389 have a plastic backing, while CBPOFO-316 and CBPOFO-043 feature a black hook backing and an adhesive loop patch. Packaging varies, with some models sold individually and others in four-packs. Manufacturers must certify that the product meets all salient characteristics, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) requires a specific Badge Emblem for its Special Response Team (SRT) personnel. This fully embroidered patch, designated CBPOFO-333, is badge-shaped, measuring 3-3/8” tall by 2-3/8” wide, with an eagle centered above a shield. Key features include a screen-printed, woven, or dyed tan and brown Department of Homeland Security (DHS) seal at its center, flanked by a brown strip above and a brown ribbon scroll below. All lettering, including “U. S. CUSTOMS AND BORDER PROTECTION” and “OFFICER,” is uppercase tan and embroidered. The emblem features a tan hook backing, comes with a corresponding loop patch, and is designed to be machine washable, fade-resistant, pill-resistant, and fray-resistant. Made of polyester fabric and thread, it utilizes specific Pantone colors for tan, dark brown, brown, and yellow. Manufacturers must certify adherence to these characteristics, and the government reserves the right to verify conformance.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a uniform specification (CID8-1-11) for a grey badge emblem for its Special Response Team (SRT) personnel. The fully embroidered patch, measuring 3-3/8” tall x 2-3/8” wide, features a shield shape with an eagle, a screen-printed Department of Homeland Security (DHS) seal, and specific black strips and ribbon scrolls. All lettering, including “U. S. CUSTOMS AND BORDER PROTECTION” and “OFFICER,” will be uppercase brown or grey and embroidered in precise sizes. The emblem must be made of polyester, have a plastic backing, be machine washable, and resist fading, pilling, and fraying. The color palette is restricted to specific Pantone shades of grey and black. Manufacturers are required to certify that the product meets all salient characteristics, and the government reserves the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection's uniform specification for the Agriculture Specialist Badge Emblem, Office of Field Operations (OFO), Gold. It details the design, salient characteristics, materials, colors, and sizing of the embroidered patch. The emblem is badge-shaped with an eagle, featuring the DHS seal,

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID8-1-13, detailing requirements for the Air and Marine Operations (AMO) Federal Agent Badge Emblem. This fully embroidered patch, measuring 3-3/4” tall by 2-3/4” wide, is designed for both male and female personnel. Key features include a shield shape with an eagle, a screen-printed Department of Homeland Security (DHS) seal, and specific black and gray lettering for “U. S. CUSTOMS AND BORDER PROTECTION” and “FEDERAL AGENT.” The emblem will have a black hook backing and a loop patch with adhesive. Made from polyester fabric and thread, it must be machine washable and resistant to fading, pilling, and fraying. The color palette includes various shades of black, bright yellow, metallic gold, light yellow, light orange, and gray. Manufacturers are required to certify that the product meets all specified salient and material characteristics, with the government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) Office of Professional Responsibility (OPR) requires a uniform specification for a gold badge emblem. This fully embroidered patch, measuring 3-3/8” tall x 2-3/8” wide, is designed for both male and female personnel. It features a badge shape with a left-facing eagle above a shield. The shield incorporates a screen-printed, woven, or dyed Department of Homeland Security (DHS) seal, a black strip at the top, and a black ribbon scroll below. All lettering, including “U.S. CUSTOMS AND BORDER PROTECTION” and “SPECIAL AGENT,” will be uppercase white. The emblem will have a plastic backing, be machine washable, and resist fading, pilling, and fraying. Constructed from polyester fabric and metallic gold thread, the patch specifies various Pantone colors for its components. Manufacturers must certify that the product meets these salient characteristics, with the Government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) Uniform Specification outlines the requirements for the CBP Keystone emblem worn by personnel in the Office of Field Operations (OFO) Special Response Teams (SRT) and Air and Marine Operations (AMO). This fully embroidered patch is keystone-shaped, 3-7/8” tall, 3-5/8” wide at the top, and 2-1/2” wide at the bottom. It features a dark brown twill background with a tan merrowed border. The emblem includes uppercase tan lettering for “U. S. CUSTOMS AND” and “BORDER PROTECTION” in two rows. A 2-5/16” diameter round Department of Homeland Security (DHS) seal, with a tan background and brown lettering, is embroidered on the lower center. The emblem has a tan hook backing and includes a tan loop patch with adhesive backing. Made of polyester, it must be machine washable, resist fading, pilling, and fraying, and be free of defects. Manufacturers must certify conformance to these specifications.

The U.S. Customs and Border Protection (CBP) Uniform Specification CID8-2-02 outlines requirements for the Keystone emblem worn by personnel in the Office of Field Operations (OFO) Special Response Teams (SRT) and Air and Marine Operations (AMO). This fully embroidered, keystone-shaped patch measures 3-7/8” tall and features a dark brown twill background with a tan merrowed border. It includes uppercase tan lettering for “U. S. CUSTOMS AND BORDER PROTECTION” and a 2-5/16” diameter embroidered Department of Homeland Security (DHS) seal in the lower center with tan background and brown lettering. The emblem is made of polyester, has a plastic backing, is machine washable, and resists fading, pilling, and fraying. Manufacturers must certify conformance to the specifications and quality standards, with the government reserving the right to verify compliance.

The U.S. Customs and Border Protection (USBP) Uniform Specification CID8-2-04 outlines the requirements for the USBP Keystone emblem. This fully embroidered patch, featuring a keystone shape (3-7/8” tall, 3-5/8” wide at top, 2-1/2” wide at bottom) with a navy blue twill background and yellow-gold merrowed border, is designed for male and female personnel. It includes

The U.S. Customs and Border Protection (USBP) Uniform Specification outlines the requirements for fully embroidered Keystone emblems for male and female Border Patrol personnel. The specification details two versions: a standard navy background (CBPCBP-258) and a subdued green background (CBPOBP-390). Both emblems are keystone-shaped, measuring 3-7/8” tall, 3-5/8” wide at the top, and 2-1/2” wide at the bottom. Key characteristics include specific background and border colors, uppercase lettering for “U. S. CUSTOMS AND BORDER PROTECTION,” and an embroidered Department of Homeland Security (DHS) seal. The emblems must have a black hook backing with a loop patch, be machine washable, resist fading, pilling, and fraying, and be individually packaged. Made of polyester, the emblems adhere to strict color specifications (Pantone codes included). Manufacturers must certify that their product meets these salient characteristics, conforming to their own quality assurance practices and commercial marketplace standards. The document includes design renderings and revision history.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CID8-2-06, for the Keystone Emblem to be worn by male and female personnel of the U.S. Border Patrol (USBP) Special Operations Group (SOG). This document details the specific requirements for the partially embroidered patch, which features a keystone (trapezoid with curved top) shape. Key characteristics include dimensions of 3-7/8” tall by 3-5/8” wide at the top and 2-1/2” wide at the bottom, with a tan twill background and a brown merrowed edge. The emblem will display

This document outlines the uniform specifications for the U.S. Customs and Border Protection Office of Field Operations (OFO) Keystone emblem. It details the design, salient characteristics, materials, colors, and sizing for two versions: CBPOFO-159 (sew-on with plastic backing) and CBPOFO-318 (with black hook backing and loop patch). The emblem is a gray keystone-shaped embroidered patch, 3-7/8” tall, featuring black lettering for “U. S. CUSTOMS AND BORDER PROTECTION” and a 2-5/16” diameter embroidered Department of Homeland Security (DHS) seal at the lower center. The DHS seal includes specific lettering, an eagle with shield logo, and a black inner ring, all in various specified colors. The emblems must be machine washable, resist fading, pilling, and fraying, and be free of defects. Manufacturers are required to certify that their product meets these specifications and quality standards.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a uniform specification for the OFO Special Response Teams (SRT) Keystone emblem. This fully embroidered patch, designed for both male and female personnel, is keystone-shaped (3-7/8” tall, 3-5/8” wide at the top, and 2-1/2” wide at the bottom) with a grey twill background and a black merrowed border. It features uppercase black lettering for “U. S. CUSTOMS AND BORDER PROTECTION” and a 2-5/16” diameter round Department of Homeland Security (DHS) seal at the lower center, embroidered in grey and black with black lettering. The emblem, made of polyester, includes a black hook backing and a loop patch, is machine washable, and resists fading, pilling, and fraying. Manufacturers must certify that the product meets these specifications.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) Uniform Specification CID8-2-09 outlines the requirements for a circular, fully embroidered AMO Round emblem. This emblem is designed for both male and female AMO personnel, measuring 4-3/8 inches in diameter with a brown twill weave background. Key features include a dark tan double-line border, specific uppercase lettering for "U. S. CUSTOMS AND BORDER PROTECTION" on the top rocker, and "AIR AND MARINE OPERATIONS" on the bottom rocker, accompanied by three silver stars. The central AMO logo, within a 3-inch diameter ring, features a rust-colored USA shape and a dark tan eagle with a shield. The emblem must have a plastic backing, be machine washable, and resist fading, pilling, and fraying. Made of polyester cloth and thread, it adheres to specific Pantone color codes for brown, dark tan, and rust. Manufacturers must certify that the product meets these characteristics and conforms to commercial marketplace standards. This document ensures uniform quality and appearance for AMO personnel emblems.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a uniform specification (CID8-2-10) for a round, brown, and tan hook-backed emblem. This embroidered patch, designed for both male and female AMO personnel, is 4-3/8 inches in diameter. Key features include a brown twill background, a double dark tan border, and specific lettering for "U. S. CUSTOMS AND BORDER PROTECTION" and "AIR AND MARINE OPERATIONS" in dark tan. The center displays the AMO logo with a rust-colored USA shape and a dark tan eagle and shield, all within a 3-inch circular ring. The emblem is made of polyester, machine washable, and designed to resist fading, pilling, and fraying. Manufacturers must certify that the product meets these characteristics, with colors specified by Pantone codes. This document ensures uniformity and quality for AMO uniform emblems.

This document outlines the U.S. Customs and Border Protection's (USBP) specifications for the Left Shoulder Round emblem, model CBPOBP-104. This emblem, designed for male and female USBP personnel, is a 3-1/8” diameter round patch with a navy background and a merrowed gold border. It features a yellow-gold embroidered outline of the continental United States, 2-1/4” wide by 1-3/8” tall, centered on the emblem. The lettering “U. S. BORDER PATROL” is embroidered in three rows across the USA outline in 7/16” uppercase yellow-gold letters. The emblem is made of polyester, has a plastic backing, is machine washable, and resists fading, pilling, and fraying. Manufacturers must certify that the product meets these characteristics and conforms to commercial marketplace standards.

This document outlines the U.S. Customs and Border Protection's (USBP) uniform specifications for two versions of the USBP Round emblem: a standard navy and a subdued green. These embroidered patches, intended for both male and female personnel, are 3-1/8” in diameter and feature the USBP logo with an outline of the continental United States. Key characteristics include specific color schemes for the background, border, and lettering, a black hook backing, machine washability, and resistance to fading, pilling, and fraying. The emblems are made of polyester cloth and thread, available in one size, and must be free of defects. Manufacturers are required to certify that the product meets all specified salient characteristics and quality standards.

This U.S. Customs and Border Protection Uniform Specification (CID8-2-14) outlines the requirements for the U.S. Border Patrol (USBP) Special Operations Group (SOG) Left Shoulder Round Emblem. This partially embroidered patch, 3 inches in diameter, features a tan background and a brown merrowed edge. The emblem displays a brown embroidered outline of the continental United States, 2-1/4 inches wide by 1-3/8 inches tall, centered with "U.S. BORDER PATROL" in 3/8-inch uppercase brown letters across it. It includes a tan hook backing and a corresponding loop patch with adhesive. Made of polyester, the emblem must be machine washable, resist fading, pilling, and fraying, and be free of defects. Manufacturers must certify conformance to these specifications and their own quality standards. The document also notes that the provided art renderings' dimensions and colors are incorrect, and the product description should be referred to for accurate details.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) Uniform Specification outlines the requirements for the OFO Round emblem, worn by both male and female personnel. The emblem is a fully embroidered, slightly oval patch, 4-1/4” tall and 3-5/8” wide, with a black twill background and a double thin silver border. It features uppercase silver lettering for “U. S. CUSTOMS AND BORDER PROTECTION” on arc rockers and “FIELD OPERATIONS” on the bottom rocker, flanked by three silver stars. The central OFO logo is 2-15/16” tall and 3-1/8” wide, with a navy background, a light blue globe, and an eagle with a shield in silver, blue, royal blue, and light green. Two versions are specified: CBPOFO-160 with a plastic backing and CBPOFO-317 with a black hook backing and an adhesive loop patch. Both must be machine washable, resist fading, pilling, and fraying, and be made of polyester cloth and thread. The document details specific Pantone colors for each element. Manufacturers must certify conformance to these specifications and commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) document, CID8-2-16, outlines the specifications for the Office of Field Operations (OFO) Special Response Team (SRT) left shoulder round emblem. The emblem is a dark grey, slightly oval embroidered patch with black lettering and a black double-line border. It measures 3-15/32” tall and 2-31/32” wide. The top rocker features “U. S. CUSTOMS AND” and “BORDER PROTECTION” in black uppercase letters, while the bottom rocker displays “FIELD OPERATIONS” with three black stars on each side. The center includes an oval OFO logo, 2-3/8” tall and 2-1/2” wide, with a black and dark grey eagle and shield. Made of polyester, the emblem must resist fading, pilling, and fraying, be machine washable, and come with a black hook backing and a loop patch. Manufacturers must certify conformance to these specifications and commercial quality standards.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a uniform specification for a small, round, brown emblem. This fully embroidered patch, designated CBPOAM-334, is designed for both male and female AMO personnel. Key characteristics include an oval shape with top and bottom rockers, measuring 3-1/8” tall and 2-5/8” wide. The emblem features a brown twill background, dark tan double-line border, and uppercase lettering in dark tan for “U. S. CUSTOMS AND BORDER PROTECTION” on the top rocker and “AIR AND MARINE OPERATIONS” with three silver stars on the bottom rocker. The central AMO logo, within a dark tan oval ring, depicts a rust-colored USA shape with a dark tan and rust eagle and shield. Constructed from polyester, the emblem has a plastic backing, is machine washable, and resists fading, pilling, and fraying. Colors are specifically defined by Pantone codes for brown, dark tan, and rust. Manufacturers must certify conformance to these specifications, with the government reserving the right to verify compliance.

This U.S. Customs and Border Protection (CBP) document outlines the specifications for the U.S. Border Patrol (USBP) Small Round emblem. This emblem is a partially embroidered patch with the USBP logo, designed for both male and female personnel. Key characteristics include a 1-1/2" diameter, a navy background, a yellow-gold hot needle cut edge, and a centered yellow-gold embroidered outline of the continental U.S. The lettering "U. S. BORDER PATROL" is embroidered in three rows across the U.S. outline, using 7/32" uppercase yellow-gold letters. The emblem features a plastic backing, is machine washable, and resists fading, pilling, and fraying. It is made of polyester cloth and thread, with specific Pantone colors for navy and yellow-gold. Manufacturers must certify that the product meets these salient characteristics, conforming to their own standards and quality assurance practices, and is the same product sold commercially.

The U.S. Customs and Border Protection (USBP) Uniform Specification document outlines the requirements for the USBP Medium Round emblem. This emblem is a partially embroidered patch with the USBP logo, designed for both male and female personnel. Key characteristics include a 2-7/16” diameter, a navy background, and a yellow-gold merrowed border. The continental United States outline is centered and embroidered in yellow-gold, measuring 1-3/4” wide by 1-1/8” tall. The lettering “U. S. BORDER PATROL” is embroidered in three rows of 5/16” uppercase yellow-gold letters. The emblem must have a plastic backing, be machine washable, and resist fading, pilling, and fraying. It is made of polyester cloth and thread, available in one size, and must be free of defects. Manufacturers must certify that the product meets these specifications and quality standards, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a uniform specification for a small, round, black emblem. This fully embroidered patch, designated CBPOFO-286, is designed for both male and female OFO personnel. The emblem is slightly oval, measuring 3-1/8” tall by 2-1/8” wide, with top and bottom rockers. It features a black twill background, a silver double-line border, and hot needle-cut edges. Lettering, all in uppercase silver, includes “U. S. CUSTOMS AND BORDER PROTECTION” across the top rocker in two rows and “FIELD OPERATIONS” with three silver stars on each side across the bottom rocker. The central OFO logo is 2-1/8” tall by 2-1/4” wide, with a navy background, a silver double-line border with a red center, a light blue and navy globe, a silver and blue eagle with shield, and a shield in silver, royal blue, and light green. Made of polyester, the emblem has a plastic backing, is machine washable, and resists fading, pilling, and fraying. It is available in one size and must be free of defects. Manufacturers must certify conformance to the specifications, and the government reserves the right to require proof prior to delivery.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for the CBP Round Explorer emblem, designated as CBPCBP-053. This document outlines the requirements for an emblem to be worn by male and female personnel in Air and Marine Operations (AMO), U.S. Border Patrol (USBP), and the Office of Field Operations (OFO). The emblem is a partially embroidered, round patch, 3-15/16” in diameter, featuring a royal blue twill background with a yellow merrowed border. It includes “LAW ENFORCEMENT” and “EXPLORER” in ¼” uppercase yellow letters. The center displays the Explorer logo within a 2-3/4” yellow circular ring, with specific color details for the eagle and shield. Made of polyester, the emblem must be machine washable, resist fading, pilling, and fraying, and be free of defects. Manufacturers must certify conformance to these specifications and commercial marketplace standards.

The U.S. Customs and Border Protection (USBP) Uniform Specification outlines the requirements for the Border Patrol Search, Trauma, and Rescue (BORSTAR) emblem. This emblem is designed for male and female personnel within the USBP Special Operations Group (SOG). The specification details a rectangular, partially embroidered patch, 1-¼” tall and 1-¾” wide, with a green plain weave background and a merrowed green border. The BORSTAR symbol, measuring 1-½“ wide and 1- 1/8” tall, is to be embroidered in brown. The emblem must include a tan hook backing sewn to the back and a corresponding tan loop patch with adhesive. Made of polyester, the emblem must be machine washable, resist fading, pilling, and fraying, and be free of defects. Colors are specified as Pantone Green for the background and Pantone Brown for lettering and outlines. Manufacturers must certify that the product meets these characteristics and conforms to their quality assurance practices.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CBPOBP-282, for the U.S. Border Patrol (USBP) Special Operations Group (SOG) Border Patrol Tactical Unit (BORTAC) Rocker emblem. This document outlines the requirements for a partially embroidered patch to be worn by both male and female personnel. Key characteristics include its rectangular shape (1-¼” tall, 1-¾” wide) with a green plain weave background and a merrowed green border. The BORTAC symbol, measuring 1½” wide and 1” tall, will be embroidered in brown. The emblem must feature a tan hook backing and include a matching tan loop patch with adhesive backing. Made from polyester cloth and thread, the emblem must be machine washable, resist fading, pilling, and fraying, and be free of defects. Colors are specified as Green (Pantone 16-XXXXTC) for the background and Brown (Pantone 19-XXXXTC) for lettering and outline. Manufacturers are required to certify that the product meets these salient characteristics and conforms to their own quality standards, with the Government reserving the right to verify conformance.

This U.S. Customs and Border Protection (CBP) document, CID8-2-33, outlines the specifications for a cloth nametag for Air and Marine Operations (AMO) personnel. The nametag is a 2" x 4" dark brown rectangular polyester patch with rounded corners and a tan merrowed edge. It features an embroidered organizational logo from a selection of aircrew, aviator, marine, non-flying DEO, or maintenance officer insignias. Customization includes the wearer's first initial and last name, along with their title, both in ¼" uppercase tan block letters. The nametag must have a hook backing, be resistant to pilling, fraying, fading, and shrinking, and be machine washable. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards.

The U.S. Customs and Border Protection's Air and Marine Operations (AMO) requires a standardized leather nametag for its personnel. This commercial item description, CBPOAM-220, outlines the specifications for a chocolate brown, rectangular leather nametag, measuring 2” tall x 4” wide. It must feature a hook backing and be available individually packaged. The nametag will display the wearer’s organizational logo, chosen from a selection of Aircrew, Aviator, Marine, Non-Flying DEO, or Maintenance Officer insignias, embossed in gold. Customization includes the wearer’s first initial and last name, along with their title, both in ¼” uppercase block letters, also in gold. A comprehensive list of approved titles is provided, ranging from 'EXEC ASST COMMISSIONER' to 'TELECOM SPECIALIST'. Manufacturers must certify that their product meets these salient and material characteristics, ensuring quality and adherence to commercial standards.

This document, CID8-2-35(a-c), outlines the uniform specifications for Agency Identification Nametapes used by the U.S. Customs and Border Protection. These nametapes are for the U.S. Border Patrol (USBP) Special Operations Group (SOG) and the Office of Field Operations (OFO) Special Response Team (SRT). The nametapes are 5” long x 1” wide, made of ripstop fabric with hook backing, machine washable, and designed to resist fading, pilling, and fraying. Two specific versions are detailed: CBPOBP-275 with “U. S. BORDER PATROL” embroidered in brown, and CBPOFO-565 with “U. S. CUSTOMS & BORDER PROTECTION” embroidered in brown. The nametapes feature a camouflage print with brown embroidery and tan thread, are free of PFAS, and come one per package. Manufacturers must certify that the product meets these specifications and commercial marketplace standards.

This document, CID8-2-36, outlines the specifications for the U.S. Customs and Border Protection's Office of Field Operations (OFO) Special Response Team (SRT) Agency Identifier Tape. The tape is a 5" long x 1" wide navy cloth strip with black hook backing, made from 65% polyester and 35% cotton. It features "U. S. CUSTOMS AND BORDER PROTECTION" embroidered in grey 3/8" uppercase letters. Key characteristics include resistance to fading, pilling, and fraying, machine washability, and availability in one size per package. Color specifications are provided using FED-STD 595C and Pantone shades for the tape, backing, embroidery, and thread. Manufacturers must certify conformance to these specifications, with the government reserving the right to request proof. The document also includes an update log detailing changes from ripstop to plain weave and the addition of Pantone color information.

The U.S. Customs and Border Protection (USBP) Uniform Specification outlines the requirements for the USBP Explorer Rocker emblem. This partially embroidered, rocker-shaped patch, measuring ¾” tall and 4” wide, is designed for male and female personnel of the U.S. Border Patrol. Key characteristics include a navy twill background, a gold merrowed edge, and “EXPLORER” embroidered in 5/16” gold uppercase letters. Made of polyester cloth and thread, the emblem features a plastic backing, is machine washable, and resists fading, pilling, and fraying. The colors are specified as Yellow/Gold (Pantone 13-0859 TC) for the border and lettering, and Blue (Pantone 19-4044 TC) for the background. Manufacturers must certify that the product meets these specifications and quality standards, with the government reserving the right to verify conformance.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a uniform specification (CBPOFO-107) for an "EXPLORER" rocker emblem. This partially embroidered, rocker-shaped patch is designed for both male and female OFO personnel. Key characteristics include a size of 3/4" tall and 4" wide, a black twill background, and a silver-grey merrowed border. The word "EXPLORER" is embroidered in 5/16" silver-grey uppercase letters across the arc. Made of polyester, the emblem features plastic backing, is machine washable, and resists fading, pilling, and fraying. Colors are specified as black (Pantone 19-4305 TC) for the background and grey (Pantone 15-4101 TC) for the border and lettering. Manufacturers must certify that the product meets these specifications, ensuring it is free of defects and conforms to commercial marketplace standards.

The U.S. Customs and Border Protection (CBP) Air & Marine Operations (AMO) Honor Guard Uniform Specification outlines the requirements for a partially embroidered, rocker-shaped emblem. This emblem, measuring 13/16” tall and 3-3/4” wide, features a dark brown twill background with a dark tan merrowed border. “HONOR GUARD” is embroidered in 3/8” dark tan uppercase letters across the arc. Made of polyester cloth and thread, the emblem includes a plastic backing and must be machine washable, resistant to fading, pilling, and fraying. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards.

The U.S. Customs and Border Protection, Office of Field Operations (OFO) has issued a uniform specification for the OFO Honor Guard Rocker emblem. This document outlines the requirements for a partially embroidered, rocker-shaped patch to be worn by both male and female personnel. Key characteristics include a size of 3/4" tall and 4" wide, a black twill background, and a silver-grey merrowed border. The words “HONOR GUARD” are to be embroidered in a 5/16” silver-grey arc. The emblem must have a plastic backing, be machine washable, and resist fading, pilling, and fraying. Made of polyester cloth and thread, the specified colors are Black (Pantone 19-4305 TC) for the background and Grey (Pantone 15-4101 TC) for the border and lettering. Manufacturers must certify that the product meets these specifications and quality standards, with the government reserving the right to request proof of conformance.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for the Border Patrol Search, Trauma, and Rescue (BORSTAR) Rocker emblem. This emblem is designed for male and female personnel within the U.S. Border Patrol's Special Operations Group. The specification details the rocker-shaped, partially embroidered patch, which measures 3/4" tall and 2-1/4" wide. Key characteristics include a tan plain weave background, a brown merrowed edge, and "BORSTAR" embroidered in 5/16" brown uppercase letters. The emblem will have a tan hook backing and include a matching tan loop patch with adhesive. Made of polyester, it must be machine washable, resist fading, pilling, and fraying, and be free of defects. Colors are specified as Tan (Pantone 16-1010TC) for the background and Brown (Pantone 19-1118TC) for lettering and outline. Manufacturers must certify that the product meets these specifications and conforms to their own quality standards and commercial marketplace offerings.

The U.S. Customs and Border Protection (CBP) has issued a uniform specification, CBPOBP-280, for the Border Patrol Tactical Unit (BORTAC) Rocker emblem. This emblem is for male and female personnel of the U.S. Border Patrol (USBP) Special Operations Group (SOG). The rocker-shaped patch is 3/4" tall and 2-1/4" wide, with a tan plain weave background and a brown merrowed edge. "BORTAC" is embroidered in arc in 5/16" brown uppercase letters. It features a tan hook backing and includes a tan loop patch with adhesive. The emblem must be machine washable, resist fading, pilling, and fraying, and be made of polyester cloth and thread. The background color is Tan (Pantone 16-1010TC), and the lettering and outline are Brown (Pantone 19-1118TC). Manufacturers must certify that the product meets these specifications and quality standards, with the Government reserving the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued specification CID8-2-43 for a Special Response Team (SRT) Rocker emblem. This document outlines the requirements for a partially embroidered, rocker-shaped patch to be worn by OFO SRT personnel. Key characteristics include dimensions of 3/4” tall and 2-1/4” wide, a dark grey twill background, a black merrowed border, and “SRT” embroidered in 5/16” black uppercase letters. The emblem must have a black hook backing and a corresponding loop patch with adhesive. Made of polyester, it must be machine washable, resist fading, pilling, and fraying, and be free of defects. Colors are specified as Dark Grey (Pantone 19-4014 TC) for the background and Black (Pantone 19-4203 TC) for the border and lettering. Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards.

This document outlines the U.S. Customs and Border Protection (CBP) uniform specification for the Office of Field Operations (OFO) Left Shoulder Round emblem. The emblem is a slightly oval, fully embroidered patch, 4-1/4” tall and 3-5/8” wide, made of polyester cloth and thread. It features a black twill background, a double thin pink border, and a plastic backing. Lettering includes “U. S. CUSTOMS AND BORDER PROTECTION” on the top rocker and “FIELD OPERATIONS” on the bottom, all in silver uppercase letters. The bottom rocker also includes two pink stars and ½” pink Breast Cancer Awareness ribbon scrolls. The center features an oval OFO logo with pink oceans, black land masses, and a silver and black eagle with shield. The emblem must resist fading, pilling, and fraying, be machine washable, and free of defects. Colors include black, pink, grey, and silver. Certification is required to ensure the product meets specifications and commercial marketplace standards.

This U.S. Customs and Border Protection document outlines the specifications for the Office of Field Operations (OFO) Special Response Team (SRT) Rocker emblem. The emblem is a dark brown, rocker-shaped patch, 3/4" tall and 2-1/4" wide, with a light brown merrowed border. It features "SRT" embroidered in 5/16" light brown uppercase letters across the arc. Made of polyester, it has a tan hook backing and includes a tan loop patch with adhesive. The emblem must be machine washable, resist fading, pilling, and fraying, and be free of defects. Manufacturers must certify conformance to these characteristics and commercial marketplace standards. The document specifies Pantone colors for brown (19-1116 TC) and tan (16-1010 TC) and notes an update to the emblem's width from 4" to 2-1/4".

This document outlines the U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) Special Response Team (SRT) Round Emblem specifications. This fully embroidered patch, slightly oval-shaped with top and bottom rockers, measures 3-15/32” tall and 2-31/32” wide. It features a brown twill background with a dark tan double thin line border. Lettering includes “U. S. CUSTOMS AND” and “BORDER PROTECTION” across the top rocker, and “FIELD OPERATIONS” with three silver stars on each side across the bottom rocker, all in dark tan. The central OFO logo is 2-3/8” tall and 2-1/2” wide, with a brown and tan globe, and a dark tan and brown eagle with shield. The emblem has a tan hook backing and comes with a tan loop patch. Made of polyester, it is machine washable, fade-resistant, and available in one size. The colors are specified as Brown (Pantone 19-1118 TC) and Dark Tan (Pantone 16-1010TC). Manufacturers must certify conformance to these specifications.

This U.S. Customs and Border Protection (CBP) document outlines the uniform specifications for the Air and Marine Operations (AMO) Keystone emblem. The emblem is a black, trapezoid-shaped embroidered patch, 3-7/8” tall, with a gray merrowed border. It features “U.S. CUSTOMS AND BORDER PROTECTION” in gray uppercase letters at the top and a 2-5/16” diameter embroidered Department of Homeland Security (DHS) seal at the lower center. The DHS seal has a gray background, black lettering, an inner black ring, and a black eagle with a shield logo. The emblem must be machine washable, resist fading, pilling, and fraying, and be PFAS-free. Two versions are specified: CBPOAM-390 with a black hook backing and a black loop patch, and CBPOAM-429 with a plain backing for sewing. Manufacturers must certify conformance to specifications and commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) document details the specifications for Air and Marine Operations (AMO) Round emblems, available in both hook-and-loop (CBPOAM-391) and sewn-down (CBPOAM-430) versions. The emblem is a 4-3/8” diameter black, circular embroidered patch with dark gray borders and lettering, made from polyester. It features

This document outlines the U.S. Customs and Border Protection (CBP) uniform specification for a small, round, printed emblem worn by personnel in Air and Marine Operations (AMO), U.S. Border Patrol (USBP), and the Office of Field Operations (OFO). The emblem, 2-1/2” in diameter, features a white embroidered background with screen-printed silver-grey, red, and dark blue elements, including the CBP logo,

The U.S. Customs and Border Protection (CBP) has issued a uniform specification for Black Tab Emblems to be worn by Chaplaincy and Peer Support personnel. The specification details requirements for two types of embroidered rectangular patches: CBPCBP-381 for "PEER SUPPORT" and CBPCBP-382 for "CHAPLAIN," both with white uppercase lettering on a black twill background. Each emblem must be 3/4" tall by 2-1/4" wide, feature a black merrowed edge, and have a black hook backing with a corresponding loop patch. Made of polyester cloth and thread, the emblems must be PFAS-free, machine washable, and resistant to fading, pilling, and fraying. Manufacturers are required to certify that their products meet these salient characteristics and conform to commercial marketplace standards. This document ensures uniformity and quality for these specific uniform items within the CBP.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a uniform specification, CBPOAM-158, for a Subdued Flag Emblem. This emblem, designed for both male and female AMO personnel, is a rectangular embroidered American Flag measuring 2-1/8” tall by 3” wide. Key features include a tan embroidered border, alternating brown and tan stripes, and a star field with tan stars on a brown background positioned on the right. The emblem is made of polyester cloth, with matte brown (Pantone 19-0617 TC) as the background color and tan (Pantone 16-1212 TC) for embroidery. It comes with a hook backing sewn to the emblem and a loop patch with adhesive backing, sized to match. The emblem must be machine washable, fade and shrink resistant, and free of defects. Manufacturers are required to certify that the product meets these characteristics and conforms to commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for nametapes worn by personnel in the U.S. Border Patrol (USBP) Special Operations Group (SOG) and the Office of Field Operations (OFO) Special Response Team (SRT). The document specifies two types: CBPOBP-274 MultiCam® and CBPOFO-300 Arid MultiCam®. Both nametapes are 5" long by 1" wide, made of ripstop polyester fabric with hook backing, machine washable, and resistant to fading, pilling, and fraying. Key differences include the embroidery: CBPOBP-274 requires the first initial and last name in brown 3/8" uppercase letters on a MultiCam® nametape, while CBPOFO-300 specifies only the last name in brown 3/8" uppercase letters on an Arid MultiCam® nametape. Manufacturers must certify that their products meet these characteristics and conform to commercial marketplace standards.

This U.S. Customs and Border Protection (USBP) Uniform Specification, CID8-3-03, outlines the requirements for green nametapes worn by male and female U.S. Border Patrol personnel on RDU uniforms. The nametape, model CBPOBP-118, must be a 6” long x 1” wide green twill fabric strip with folded and sewn edges. It features the wearer’s last name embroidered in ½” black uppercase letters and has a sewn-on hook backing. Key characteristics include machine washability, resistance to fading, pilling, and fraying, and availability in single packages. The nametape color is FED-STD 595C color chip 34083 green, with black embroidery thread. Manufacturers must certify that their product meets these salient characteristics, conforms to their own quality standards, and is commercially available. The Government reserves the right to verify conformance before delivery.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for Identification Nametapes to be worn by Office of Field Operations (OFO) personnel. It details requirements for three types: CBPOFO-087 Tan (now inactive for Special Response Team uniforms), CBPOFO-278 Navy (for all OFO uniforms), and CBPOFO-204 Black (for remaining BDU and some outerwear uniforms). Key characteristics include dimensions, plain weave fabric for navy and black tapes, embroidered last names in uppercase, hook backing, resistance to wrinkling and fading, and inclusion of matching loop tape. The document specifies material, color standards (FED-STD 595C or Pantone Shades) for both the nametape and embroidery, and notes that the nametapes are available in one size per package. Manufacturers must certify conformance to these specifications. Revisions include updating the Tan nametape to inactive status and changing navy and black nametapes from ripstop to plain weave fabric, along with adding Pantone Shade information.

This document outlines the U.S. Customs and Border Protection (CBP) uniform specification for Air and Marine Operations (AMO) nametapes, specifically CBPOAM-070 and CBPOAM-392. These nametapes are required for both male and female personnel. Key specifications include a 6" long by 1" wide black twill cloth strip with hook backing, featuring the wearer's first initial and last name embroidered in uppercase Navy Nametag font. The embroidery font size should be ½" or adjusted to fit the name. CBPOAM-070 specifies taupe embroidery, while CBPOAM-392 requires Western Gray embroidery. The nametapes must resist wrinkling, fading, pilling, and fraying, and each package must include a matching loop tape. Manufacturers must certify that their product meets these salient characteristics, conforms to their own quality assurance practices, and is commercially available. The government reserves the right to request proof of conformance.

This U.S. Customs and Border Protection (CBP) commercial item description, CID8-3-06, outlines the requirements for 150 pieces of 1” x 6” black loop tape for Air and Marine Operations (AMO) personnel. The tape must be black, 6 inches long by 1 inch wide, and sold in sets of 150, with an adhesive backing. Manufacturers must certify that the product meets these salient characteristics and conforms to their own quality assurance practices, being the same product sold commercially. The government reserves the right to request proof of conformance before delivery. The document, reviewed and approved by uniform liaison and UMC staff, was created on June 23, 2021, and finalized on July 19, 2021.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for ceremonial gold buttons, designated for male and female Air and Marine Operations (AMO) personnel. The specification details requirements for two sizes: large (36 ligne/7/8” diameter) and small (24 ligne/5/8” diameter). Key characteristics include a round metal button with a matte gold-plated finish, featuring a raised AMO eagle and shield logo, with "AIR AND MARINE" along the top circumference and "U. S. CUSTOMS AND BORDER PROTECTION" along the bottom, separated by three stars on each side. The buttons must be fade, scratch, and chip resistant, free of defects, and packaged individually. Manufacturers are required to certify that their product meets these salient characteristics and conforms to commercial marketplace standards.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for ceremonial gold Honor Guard Buttons, designated for male and female personnel within the Office of Field Operations (OFO). The buttons feature a round, metal design with the AMO eagle and shield logo,

This U.S. Customs and Border Protection Uniform Specification outlines the requirements for gold metal buttons worn by U.S. Border Patrol (USBP) personnel. The document details the design, which features a raised image of the United States with "U S" overlaying it, "BORDER" along the top circumference, "PATROL" along the bottom, and a single star on each side, all against a background of fine horizontal ribs. These buttons are specified to be round, made of metal, and available in two sizes: small (24 ligne, 5/8” diameter) and large (36 ligne, 7/8” diameter). They must have a polished gold-plated finish, be fade, scratch, and chip resistant, and packaged individually. The specification emphasizes polished gold color, material characteristics, sizing, and workmanship, requiring the buttons to be free of defects. Manufacturers are required to certify that their products meet these salient characteristics and conform to commercial quality standards.

This document outlines the U.S. Customs and Border Protection's (CBP) uniform specification for Shoulder Ornament Insignia worn by U.S. Border Patrol (USBP) personnel. The insignia, a metal ornament featuring an eagle above an oval USBP logo, is available in gold, silver, and oxidized silver finishes. Key characteristics include its 1-3/16” wide x 13/16” tall oval with a raised U.S. map,

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for a standardized Tie Tack for male and female personnel in the Office of Field Operations (OFO) and Air and Marine Operations (AMO). The Tie Tack, designed to resemble a CBP badge, must be 3/4" tall by 1/2" wide, made of shiny gold metal, and feature a clutch with a gold chain attached to a buttonhole bar. Specific variations in the badge face are detailed for AMO Federal Agents and OFO Officers, with one OFO Officer badge requiring an additional stud and clutch. The design includes features to prevent rotation, and the product must be free of defects. Manufacturers are required to certify that the Tie Tack meets these salient characteristics and conforms to commercial marketplace standards.

The U.S. Customs and Border Protection (USBP) Uniform Specification, CID9-1-07, outlines the requirements for a standardized Tie Tack for male and female Border Patrol personnel. This commercial item description details a shiny gold, metal Tie Tack featuring a 5/8” round button face with a shallow curve. The design includes an outline of the United States as a background, two small stars, and the text “U S,” “BORDER,” and “PATROL” in specified letter sizes. A clutch is attached to a gold chain connected to a buttonhole bar. The Tie Tack will be available in one size and must be free of defects. Manufacturers are required to certify that the product meets these salient and material characteristics, conforming to their own quality assurance practices and commercial marketplace standards. The government reserves the right to request proof of conformance before delivery.

The U.S. Customs and Border Protection (CBP) Air and Marine Operations (AMO) has issued a commercial item description (CID) for a Gold Eagle Hat Device. This device, designated CBPOAM-161, is intended for male and female AMO personnel and features the AMO logo: an eagle with a shield clutching an olive branch and arrows. The hat device must be approximately 2-1/4” wide x 1-1/4” tall, made of metal with a high-shine gold-plated finish, and resistant to fade, scratch, and chip. It will attach to a campaign hat via an upper mounting prong with a butterfly clutch and a screw post with a locking screw. The device will be available in one size, packaged individually, and must be free of defects. Manufacturers are required to certify that their product meets these specifications and conforms to their own quality standards, reserving the government's right to verify conformance before delivery.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) has issued a commercial item description (CID) detailing the requirements for a standardized hat device for its male and female personnel. The device, designated CBPOFO-116, is a gold-colored metal eagle, approximately 2.25” wide and 1.25” tall, with spread wings and wingtips down, facing left. It features the Department of Homeland Security (DHS) emblem, 5/8” in diameter, centered on the eagle's chest. A scroll runs wingtip to wingtip across the eagle's feet, divided into three equal sections with a fold. Each section has a black background with gold edging and gold letters spelling “VIGILANCE” on the left, “SERVICE” in the center, and “INTEGRITY” on the right. The hat device attaches via three pins in an inverted triangle configuration and must be free of defects. Manufacturers are required to certify that the product meets these salient and material characteristics and conforms to their own quality assurance practices, being the same product sold commercially.

The U.S. Customs and Border Protection (CBP) has issued a commercial item description (CID) for a black Mourning Badge Pin, designated CBPCBP-112. This specification outlines requirements for a uniform accessory to be worn by personnel in Air and Marine Operations (AMO), U.S. Border Patrol (USBP), and the Office of Field Operations (OFO). The pin must be a black, rectangular plastic badge with one angled side, measuring ½” wide, 3-1/8” long along the top edge, 2-7/8” long along the bottom edge, and an angled face of about 9/16” long. It requires a smooth eggshell finish, squared corners, and fade, scratch, and chip resistance. The badge will be secured by two mounting prongs with butterfly clutches and packaged individually. Manufacturers must certify that their product meets these salient characteristics, conforms to their own specifications, and is commercially available, with the government reserving the right to verify conformance before delivery.

This U.S. Customs and Border Protection (CBP) commercial item description (CID9-2-01 (a-b)) outlines the requirements for two types of black elastic mourning band badges: CBPCBP-034 (Metallic Badge) and CBPCBP-331 (Hook and Loop Badge). These bands are to be worn on service badges by male and female personnel in Air and Marine Operations (AMO), U.S. Border Patrol (USBP), and the Office of Field Operations (OFO). The document details style, salient characteristics, material, color, and workmanship, ensuring a consistent and defect-free product. Manufacturers must certify that their product meets these specifications and conforms to commercial marketplace standards. The government reserves the right to request proof of conformance.

The U.S. Customs and Border Protection (CBP) has issued Uniform Specification CID9-2-03, outlining requirements for a gold Service Star to be worn by U.S. Border Patrol (USBP) and Office of Field Operations (OFO) personnel. This commercial item description specifies that the Service Star must be a single metal gold star, ½” in diameter, with a fine ribbed surface radiating from the center, and a polished gold, fade, scratch, and chip-resistant finish. It must have one mounting prong secured by a butterfly clutch and be free of defects. Manufacturers are required to certify that the product meets these salient characteristics and conforms to their own quality assurance practices, ensuring it is the same product sold commercially. The government reserves the right to request proof of conformance before initial delivery.

This U.S. Customs and Border Protection (CBP) document, CID9-2-04, outlines the uniform specifications for a brass nameplate to be worn by personnel in Air and Marine Operations (AMO), U.S. Border Patrol (USBP), and the Office of Field Operations (OFO). The nameplate must be a 2 ½” long x ½” wide, gold-colored, rectangular brass plate with a flat, brushed, fade, scratch, and chip-resistant surface suitable for engraving, smooth rounded corners, and two clutch-backed mounting prongs. It is made of solid brass and comes one per package. Engravings must be in darkened uppercase block letters: first initial, period, and last name for AMO and USBP, and last name only for OFO. The nameplate must be free of defects, and manufacturers must certify that the product meets these characteristics and conforms to commercial marketplace standards. The government reserves the right to request proof of conformance before delivery.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) requires metal nameplates for its personnel. This commercial item description outlines the specifications for these rectangular, gold-colored metal nameplates, which measure 2-¾” long x ¾” wide. Key features include a matte black plastic engraving surface (2-5/8” long x 9/16” wide) suitable for engraving the last name in white uppercase block letters. The nameplates must be fade, scratch, and chip-resistant, with polished gold edges and back. They are secured by two mounting prongs with butterfly clutch fasteners, available in standard length (CBPOFO-088) or ¼” longer (CBPOFO-273). Manufacturers must certify that the product meets these salient characteristics and conforms to commercial marketplace standards. The government reserves the right to request proof of conformance.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for the K-9 Insignia Pin, designated CBPOFO-150, for personnel in the Office of Field Operations (OFO). The pin, approximately 7/8” wide x ½” tall, must be made of polished gold-colored, solid metal, resistant to fade, scratches, and chips. It features a capital K connected to the number 9, with two mounting prongs secured by butterfly clutches. The insignia is available in one size, packaged two per unit, and must be free of defects. Manufacturers are required to certify that the product meets these specifications and their own quality standards, aligning with commercially available items. The government reserves the right to verify conformance before delivery.

The U.S. Customs and Border Protection (CBP) Office of Field Operations (OFO) requires a Flag Citation Pin for male and female personnel, as detailed in specification CID9-2-07. This rectangular, gold-colored metal pin, measuring 1-¾” long by 5/16” wide, features a U.S. Flag image with a star field, three stripes (two red, one white), and gold edging. It must be fade, scratch, and chip resistant, with polished gold edges and a matte black engraving surface for the wearer's last name in white uppercase letters. The pin has two mounting prongs secured by butterfly clutches and square corners. Manufacturers must certify that the product meets these salient and material characteristics, conforming to their own quality standards and commercial marketplace offerings. The government reserves the right to require proof of conformance before delivery.

This U.S. Customs and Border Protection (CBP) document, CID9-2-08, outlines the specifications for a gold longevity bar pin for Office of Field Operations (OFO) personnel. The pin is trapezoidal, made of brushed brass-colored metal, approximately 2 inches wide by 0.5 inches tall. It features an engraving of “SERVING” on the left, “SINCE” on the right, and the calendar year in the middle. The pin must have a fade, scratch, and chip-resistant finish, and be packaged individually. The engraved letters are black. Manufacturers must certify that the product meets these salient characteristics and conforms to their own quality standards, with the Government reserving the right to verify conformance. This document serves as a uniform specification for a commercial item within the CBP.

This U.S. Customs and Border Protection (CBP) commercial item description outlines the requirements for a Citation Holder for male and female Office of Field Operations (OFO) personnel. The rectangular holder, sized 5-7/16” in total length, must uniformly align up to 11 citations using two mounting holes and ten removable citation holder bars with specific dimensions. It must be made from fade, scratch, and chip-resistant solid plastic with a matte black surface. The product is to be supplied one per package, free of defects, and available in a single size. Manufacturers must certify that their product meets these salient characteristics, conforms to their own specifications, and is a commercially sold item, with the Government reserving the right to verify conformance.

The Cybersecurity and Infrastructure Security Agency (CISA) has outlined detailed requirements for its Distinctive Clothing and Uniform Program, encompassing various modified commercial off-the-shelf items. The program specifies 18 different items, including men's and women's long and short-sleeved button-down shirts, long and short-sleeved polos, ball caps, wool caps, 5-in-1 jackets, lightweight jackets, unisex raincoats, male and female pants, a unisex black operator belt, and two sizes of CISA embroidered patches. Each item description includes anticipated annual demand, specific features, color, customization/embroidery details (primarily a 3-inch color CISA logo, with jackets also featuring

This document outlines detailed specifications for ERO (Enforcement and Removal Operations) uniform components and tactical gear, likely for a government procurement or RFP. It describes various apparel items, including ERO badges, long and short-sleeve tee shirts, navy and white polo shirts (including instructor versions), ballcaps, and specialized jackets like the Red Firearms Instructor Jacket. Key features emphasized across clothing items include moisture-wicking, antimicrobial finishes, UV protection, specific fabric blends (e.g., 100% polyester), and sizing from X-Small to 3XL. The document also specifies tactical gear such as slash-resistant gloves, duty gloves, and SRT (Special Response Team) tactical pants and tops in various blends (Nylon/Cotton, Polyester/Cotton) and colors (OCP/Multicam, Ranger Green), noting features like no-melt/no-drip properties, reinforced seams, and adjustable components. A pending litigation affecting the ERO Raid Jacket's branding is also mentioned. The comprehensive nature of the descriptions indicates a requirement for precise adherence to material, design, and functional standards for operational uniforms and equipment.

The FDA Uniform Specification FDA001 outlines the requirements for a 1 ½” Unisex Leather Belt. The belt must be made of plain leather with a top and bottom groove, fastened with two rivets at a square, high-gloss, silver-finish buckle. The required color is black, and available stock sizes range from Small (26-30 inches) to Extra Extra Large (50-54 inches). This document is likely part of a federal government Request for Proposal (RFP) for procuring uniforms or accessories.

The Food and Drug Administration (FDA) has issued a Uniform Specification for a unisex clip-on tie. This specification, likely part of an RFP or procurement document, details the required characteristics for three lengths: 15-inch (FDA 002), 18-inch (FDA 065), and 20-inch (FDA 066). The tie must be made of a 75% polyester/25% wool tropical weave fabric, be machine washable, and black in color. Key design features include a 3-inch clip at the top, a pre-tied clip-on design with a black metal clip, and buttonholes on the underside for attachment to a shirt to ensure a neater appearance. This document outlines the precise requirements for a standard uniform accessory, ensuring consistency and quality for FDA personnel.

The Food and Drug Administration (FDA) has issued a uniform specification, FDA004, for Unisex White Boot Socks. This specification details the required fabric characteristics, including resistance to tears, holes, runs, and shrinkage, as well as being machine washable and non-irritating. The style description mandates ventilated, over-the-calf socks with anti-fatigue support properties. The required color is white, and the socks must fit shoe sizes Medium (4-8.5), Large (9-12.5), and Extra Large (13 and up). Stock sizes are M-XL.

The Food and Drug Administration (FDA) has issued a Uniform Specification, FDA005, for a Unisex Black Credential Case. This specification outlines the precise requirements for vendors, detailing the style, material, and size of the credential case. Key features include black leather, English cut edges, framed windows, a badge cutout insert for easy removal and insertion, a protective felt flap, and plain front and back. The case must be one size and capable of fitting standard credential cards. This document serves as a guideline for vendors responding to an RFP, ensuring that all procured credential cases meet the FDA's exact standards for functionality and appearance.

The Food and Drug Administration (FDA) has issued a uniform specification for black leather gloves, designated as FDA 006 for males and FDA 067 for females. These gloves are required to have a deerskin leather shell and a Thinsulate® lining, or equivalent, for warmth in cold weather. Key performance requirements include durability, resistance to rips, tears, water, snow, and wind, as well as a moisture-wicking lining. The gloves must be securable at the wrist and come in black. Available stock sizes range from S to XXL for men and S to XL for women. This specification outlines the material, performance, style, and sizing requirements for these essential cold-weather gloves.

This document outlines the specifications for a unisex ball cap for the Food and Drug Administration (FDA), identified as FDA007. The cap is to be made of dark navy cotton twill with UV protection of 15 SPF or better. Key features include a six-panel design with buckram in the front two panels, an eyelet on each, a pre-curved bill with multiple rows of stitching, and a self-fabric covered button on top. It will have a plastic snap closure and a dark navy sweatband. Specific bill measurements are provided: 2.75 inches in length at the center, 7.00 inches in width at the center, and a crown height of 6.50 inches at the center. The cap will feature "FDA" in gold block letters embroidered on the front, with precise dimensions of 2.51 inches by 1.00 inch and a stitch count of 3000. The cap will be available in one stock size. This specification is likely part of a government Request for Proposal (RFP) for the procurement of branded apparel.

The FDA's Uniform Specification FDA008 details the requirements for Navy Maternity Trousers, outlining material, performance, color, and design specifics. The fabric must be 75% polyester and 25% wool, machine washable, and resistant to fading, stains, and wrinkles, while also being breathable. Key performance features include accommodating changing body shapes and comfort in varying climates. The trousers must be dark navy blue with complementary components. Design elements include a 2 ½” wide back waistband, an elastic maternity panel in the front, and a minimum of three lined belt loops. Front pant legs must have a permanent crease, flat front with an adjustable elastic waist, and 5” deep front pockets. All seams are to be safety stitched, and elastic in the waistband must allow for an 18” expansion. Sizing ranges from women's sizes 2 to 18 with inseam lengths from 26 to 34.

The FDA Uniform Specification FDA009 outlines the detailed requirements for a Female Navy Maternity Shirt. The shirt must be made from a blend of 74% Polyester, 25% Wool, and 1% Lycra, ensuring it is machine washable, resists fading, and is stain and wrinkle resistant. The color must be dark navy with complementary colored buttons, thread, and fasteners. The design includes a shaped body for comfort, a banded collar, two front breast pockets with scalloped flaps, an inside sling-type badge holder on the left, and shoulder epaulets. Specifics are provided for the front placket with 10 buttons, pocket dimensions (5 3/8" wide, 5 1/2" deep) with a pencil slot, and scalloped flaps. Long sleeves with button cuffs, a two-piece banded collar with permanent stays, and shoulder epaulets with specific dimensions and fastening are also detailed. Badge and nameplate reinforcements are specified, including embroidered eyelets. All buttons must be low-luster melamine. Customization includes the HHS round Emblem on the left sleeve and the Food and Drug Administration badge Emblem on the left upper front, both sewn with matching thread. Stock sizes range from XS to XL.

The Food and Drug Administration (FDA) has issued a uniform specification for female navy maternity shirts (FDA009 & FDA 078). These shirts must be made from a blend of 74% polyester, 25% wool, and 1% Lycra, be machine washable, and resist fading, stains, and wrinkles. The color must be dark navy with complementary buttons, thread, and fasteners. The style emphasizes comfort and range of motion, featuring a banded collar, two front breast pockets with scalloped flaps, an inside badge holder, shoulder epaulets, and a straight yoke back with elastic. The front is designed with vertical pleats and is slightly longer for growth. Specific dimensions and design details are provided for pockets, flaps, sleeves, collar, epaulets, and badge/nameplate reinforcements. All buttons are to be low-luster melamine, 1/2" in diameter, matching the shirt color. Customization includes an HHS round emblem on the left sleeve and an FDA badge emblem on the left upper front, with an optional hook and loop badge available. Stock sizes range from XS to XL (Regular).

The FDA's Uniform Specification FDA 010 details the precise requirements for men's 100% cotton trousers, likely for a government procurement or uniform contract. The specifications cover fabric (dark navy, wrinkle-resistant cotton), design (plain front, specific pocket configurations), and construction details. Pockets must meet minimum opening and depth requirements, with specific stitching and bar tacking patterns. Pocketing material is black, 70% polyester/30% cotton with soil release and thermal management properties. The waistband is 2" wide, fused, and closed with a crush-proof hook and eye. Inside trim components, such as fly and crotch linings, are also specified. Belt loops vary in number based on waist size, are double-thickness, interlined, and bar tacked. The zipper is a YKK brass model with specific features. Buttons are 22-ligne melamine, dyed to match the fabric. The document concludes with available stock sizes for waist (28-58) and length (32-54), providing a comprehensive guide for manufacturing these trousers.

The Food and Drug Administration (FDA) Uniform Specification FDA 011 details the precise requirements for women's 100% cotton wrinkle-resistant dark navy trousers. This specification outlines specific design elements, including a dart on each front, quarter-top front pockets, two back pockets, and side elastic inserts in the waistband. Detailed dimensions and construction methods are provided for all pockets, emphasizing durability with specific stitching and bar tacking. The pocketing material is specified as black, 80% polyester/20% cotton plain weave, with moisture transport and thermal management properties. The waistband must be 2 inches wide, secured with a crush-proof hook and eye, and feature two 1-inch wide, 4-inch long pre-shrunk elastic pieces for a minimum 1.5-inch stretch. The trousers require a YKK brass zipper with a ratcheting cam lock slider, and buttons must match the fabric color. Belt loop requirements vary by size, with a minimum of five for sizes 12 and smaller, and seven for sizes 14 and larger, each 3/4 inch wide and double-thick. Available sizes include Petite, Regular, and Tall, all ranging from 4-16. This document serves as a comprehensive guide for manufacturers to ensure uniformity and quality in the production of these government-issued trousers.

The FDA 012 Uniform Specification outlines the detailed requirements for men's 100% cotton long-sleeve shirts for the Food and Drug Administration. The shirt fabric is dark navy, 6.0 oz. per square yard, twill wrinkle-resistant cotton with a pre-cured durable press finish. Key features include die-creased pocket flaps, collar bands, and epaulets, along with permanent military creases. The front features a self-fabric center pleat, a button stand with six front buttons, and one collar button. The banded collar includes specific dimensions and interlinings, with permanent collar stays. Sleeves have one-piece pointed plackets and adjustable cuffs. Two breast pockets with mitered corners, box-pleats, and a pencil stall on the left are specified, secured with woven hook and loop fasteners. Die-cut, scalloped pocket flaps also feature fasteners and a pencil opening. Epaulets are sewn into the sleeve head seam with specific tapering, stitching, and buttonhole details. Customization includes an FDA badge emblem above the left chest pocket flap and an HHS round emblem on the left sleeve. Each garment must have permanent labels detailing size, style, fiber content, and care instructions. Buttons are dyed to match the fabric, and shirts are individually polybagged. The document outlines the precise construction, materials, and appearance standards for these uniform shirts.

The Food and Drug Administration (FDA) has issued a uniform specification (FDA 012 & FDA079) for men's 100% cotton long-sleeve shirts. This detailed document outlines the required fabric, construction, and customization for these garments. Key specifications include wrinkle-resistant dark navy twill fabric, specific creasing for pocket flaps, collar bands, and epaulets, and permanent military creases. The front features a self-fabric center pleat and a button stand with six front buttons and one collar band button. The banded collar, two-piece yoke, and sleeves have precise dimensions and stitching. Breast pockets are designed with mitered corners, box-pleats, a pencil stall on the left, and hook/loop fasteners for the flaps. The scalloped flaps also incorporate hook/loop fasteners. Epaulets are sewn into the sleeve head seam with specific dimensions and stitching, including a buttonhole and corresponding button on the yoke. Customization requires an FDA badge emblem above the left chest pocket flap and an HHS round emblem on the left sleeve, with an optional hook and loop FDA badge emblem. Each shirt must include permanent labeling detailing size, style, fiber content, and care instructions. All buttons must match the fabric color, and shirts are individually polybagged.

The FDA Uniform Specification FDA 013 details the precise requirements for men's 100% cotton short sleeve shirts, specifically for the Food and Drug Administration. The shirt must be made of 6.0 oz. dark navy twill, 100% wrinkle-resistant cotton with a pre-cured durable press finish. Key features include die-creased pocket flaps and epaulets, permanent military creases, a self-fabric center pleat on the left front, and a seven-button right front. The convertible collar has permanent stays, and the shirt includes a two-piece yoke and one-piece sleeves with bar-tacked hems. Two breast pockets with box-pleats, mitered corners, and a pencil stall on the left are specified, along with scalloped flaps secured by woven hook and loop fasteners. Epaulets are sewn into the sleeve head seam, tapering to a pointed end with a buttonhole, secured to the yoke with a corresponding button. Customization includes an FDA badge emblem above the left chest pocket flap and an HHS round emblem on the left sleeve. Labeling must include size, style, fiber content, care instructions, and country of origin. Buttons are dyed to match the fabric, and specific neck sizes are provided for Small through 3XLarge.

The FDA Uniform Specification (FDA 013 & FDA 080) details the requirements for a Men's 100% Cotton Short Sleeve Shirt, likely for official FDA personnel. The shirt fabric is a dark navy, 6.0 oz. per square yard, 100% wrinkle-resistant twill with a durable press finish. Key features include die-creased pocket flaps and epaulets, permanent military creases, and a convertible collar with fused stays. The front design incorporates a self-fabric center pleat on the left and a revere facing with seven buttons on the right. Sleeves are one-piece with a bar-tacked hem. Breast pockets are mitered with 1½” box-pleats, and the left pocket has a pencil stall. Both pockets and flaps utilize hook and loop fasteners, with flaps also featuring a centered buttonhole. Epaulets are sewn into the sleeve head seam, tapering to a point, and secured with X-stitching and a button. Customization includes an FDA badge emblem ½” above the left chest pocket and an HHS round emblem 1½” below the left sleeve seam. A hook and loop FDA badge option is available for CLIN # FDA 080. Garments must have permanent labels detailing size, style, fiber content, care instructions, and country of origin. Buttons are dyed to match the fabric, and sizes range from Small (14-14.5) to 3XLarge (19-19.5).

The FDA 014 Uniform Specification details the design and materials for an FDA Badge Patch. This irregular-shaped patch features a gold-embroidered background with a hot-knife border. The design includes an eagle at the top, with “FOOD AND DRUG ADMINISTRATION” curved above and “FDA” curved below. The patch has maximum dimensions of 2-3/8 inches in width and 3-5/16 inches in height. It is constructed with solid embroidered background material, a PVC backing, and rayon thread and border material, with hot knife edging. This specification ensures uniformity for the FDA badge patch.

The U.S. Food and Drug Administration (FDA) has issued a uniform specification for a black, Ushanka-style fur cap, designated FDA 014. This specification details the required characteristics for manufacturers, including the use of 100% sheepskin/lambskin mouton fur, a single mouton crown with a quilted insulating liner, a stiffened visor, and half-length, fold-down ear flaps made from double mouton with a chin/retention strap. The cap must be black and available in unisex sizes from extra small to double extra large. Manufacturers are required to certify that the product meets all salient characteristics, conforms to their own drawings and quality assurance practices, and is identical to products sold commercially. The FDA reserves the right to request proof of conformance before the initial delivery, ensuring quality and adherence to federal standards for this specific item.

The Food and Drug Administration (FDA) has issued a Uniform Specification, FDA 017, detailing requirements for a Unisex Navy Parka. This specification outlines material, color, and style descriptions, along with performance expectations for cold weather conditions. The parka must be 100% nylon for the outer shell, 100% polyurethane for backing, and 100% polyester for the inner shell, in a dark navy blue color. Key style features include multiple zippered pockets, an adjustable waist and cuffs, a detachable hood, pit zippers for venting, and a turtleneck collar. The parka is designed to be water-resistant, lightweight, durable, and provide warmth while allowing full range of motion. Customization includes an FDA badge on the left chest and an HHS emblem on the left sleeve. Available sizes range from extra small to 3XL.

The FDA 017 & FDA081 Uniform Specification outlines the requirements for a Unisex Navy Parka for the Food and Drug Administration. The parka must feature a 100% nylon outer shell, 100% polyurethane backing, and 100% polyester inner shell, all in a dark navy blue color that resists fading. Key design elements include multiple zippered pockets, adjustable waist and cuffs, a detachable hood, pit zippers for ventilation, and an oversized, hip-length fit. Performance requirements specify it must be durable, lightweight, water-resistant, and provide warmth and protection in cold, windy, rainy, and snowy conditions while allowing for a full range of motion. Customization includes an FDA badge emblem on the left chest and an HHS emblem on the left sleeve, with an optional hook and loop FDA badge available. Sizes range from extra small to 4XL.

The FDA Uniform Specification FDA018 details the design and material requirements for a Unisex Navy Windbreaker. The jacket's outershell is an 80% polyester, 20% cotton blend with a P/U coating, while the permanent and zip-out linings are 100% nylon taffeta. It features a windbreaker style with a two-way zipper, two-piece front, and various pockets, including side-panel and mitered pleated patch pockets with flaps designed for a 24 ligne metal button. Sleeves have adjustable cuffs, and the collar includes non-woven interlining. Optional elements include a badge tab and specific FDA and HHS emblem placements. All sewing is done with polyester core or 100% spun polyester thread, and the jacket is available in sizes S-4XL. This specification ensures uniformity and quality for the garment within federal government procurement contexts.

The FDA Uniform Specification FDA018 & FDA 082 outlines the detailed requirements for a Unisex Navy Windbreaker, likely for procurement through a federal government RFP. The specification covers fabric composition (80% polyester, 20% cotton outer, nylon lining, Hollofil insulation), design elements such as a two-piece front, plain back, and two-way zipper closure. Key features include specific pocket dimensions and construction (side-panel, mitered pleated patch pockets with flaps), pointed cuffs with two-button adjustment, and a non-woven interlined collar. Customization details specify the placement of FDA and HHS emblems, with an option for a hook and loop FDA badge. The document also specifies zipper type (YKK #5 two-way nylon), thread material, and available sizes (S-4XL). This comprehensive guide ensures uniformity and quality for the specified windbreaker.

This document, FDA 019, outlines the uniform specifications for a unisex cardigan sweater for the Food and Drug Administration. The sweater is made of 100% acrylic in dark navy blue, featuring a 5-button, long-sleeve V-neck style with a continuous flat trim. Key details include a career-weight jersey stitch body and sleeves, 1x1 rib stitch on cuffs and waistband, and reinforced shoulder seams. The cardigan has five 5/8-inch lock-stitch buttonholes and 30 Ligne 2-hole buttons, closing left over right. It requires an FDA badge emblem on the left breast and an HHS round shoulder emblem on the left sleeve. All sweaters must be steamed on a blocking frame, and sizes range from S to 4XL. This specification ensures standardization and quality for FDA-issued apparel.

The FDA Uniform Specification FDA 019 & FDA 083 outlines the detailed requirements for a unisex cardigan sweater made of 100% dark navy blue acrylic. The sweater is a 5-button, long-sleeve V-neck style with a continuous flat trim. It features a career-weight jersey stitch body and sleeves, 1x1 rib stitch on lower sleeve edges, and 3-inch wide 1x1 rib knit cuffs and waistband. All seams are over-locked, back-latched, and shoulder seams are reinforced with cotton tape. Five vertical lock-stitch buttonholes and 30 Ligne 2-hole buttons are specified, with precise placement instructions. Emblems include a 3 ¼” tall by 2 ¼” wide FDA badge on the left breast and a 3 ¼” diameter HHS round shoulder emblem on the left sleeve. An optional hook and loop FDA badge emblem is available. All finished sweaters must be blocked and steamed, with available sizes ranging from S to 4XL.

The FDA Uniform Specification FDA 021 outlines detailed requirements for female navy cargo shorts, indicating this document is likely part of a federal government Request for Proposal (RFP) for procurement. The shorts must be 65% Polyester / 35% Cotton in dark navy blue. Key design elements include two quarter-top patch pockets, two lower inverted pleat patch pockets with button-through flap closures, and two back welt pockets with button-through flap closures. Specific dimensions and construction details are provided for all pockets, including fabric content for hip pockets (70% polyester / 30% cotton, black). The waistband is 1 ½” wide, closing with a 30 ligne dark navy melamine button. Belt loops vary by size (5 for sizes 12 and under, 7 for sizes 14 and up) and are designed to accommodate a 1 ⅝” belt. The shorts feature a 45mm brass zipper, dyed-to-match buttons, and specific seaming instructions for durability. The finished inseam length is 7” with a 1” hem. Available stock sizes are RG: 6-24 Even.

The FDA Uniform Specification FDA 024 outlines detailed requirements for Male Navy Cargo Shorts, likely for procurement purposes within a government RFP. The shorts must be 65% polyester/35% cotton, dark navy blue, and feature a specific cargo style with multiple pockets. Key specifications include quarter-top patch pockets, lower inverted pleat patch pockets with button-through flaps, and back welt pockets, all with specific dimensions, stitching, and bar-tacking. The document details pocketing fabric (70% polyester/30% cotton, black for hip pockets), waistband construction, and the number of belt loops based on size. It also specifies a 45mm brass zipper, 30-ligne melamine buttons, and various seam types. Hemming instructions require a 1” hem with an 8” finished inseam. Available stock sizes range from 29-38 (all) and 40-48 (even) for regular lengths.

The FDA 025 Uniform Specification outlines the detailed requirements for Male Navy Cargo Duty Pants, designed for federal government procurement. These pants must be 65% Polyester / 35% Cotton in Dark Navy Blue. Key specifications include a uniform pattern with specific pocket configurations: straight side pockets, two back pockets (left with button tab), two hex-style cargo pockets with scalloped flaps and hook and loop closures, and a watch pocket. All pockets will use black 70% polyester / 30% cotton material. The waistband will be 2 inches wide with a crush-proof hook and eye closure and a 3-inch wide elastic web for comfort. Other details include specific belt loop counts based on waist size, a brass zipper with a cam lock slider, and dyed-to-match buttons. Available stock sizes range from 28-58 (Regular) and 32-54 (Long).

The FDA's Uniform Specification FDA026 outlines detailed requirements for female Navy cargo duty pants, emphasizing material, color, and construction. The pants must be made from a 65% polyester/35% cotton blend in dark navy blue. Key features include quarter-top front pockets, double-welt back pockets with a tab on the left, a single-welt watch pocket, and hex-style side cargo pockets with scalloped flaps and hook-and-loop closures. All pocketing must be black, 70% polyester/30% cotton. The waistband is 2 inches wide with a crush-proof hook and eye closure and an inner elastic web for comfort. The right fly and front crotch lining match the pocketing fabric. Belt loops vary in number based on waist size and accommodate a 1 ⅝-inch belt. A brass zipper with a ratcheting cam lock slider secures the front, and 22 ligne melamine 4-hole buttons are used. Stock sizes range from 20-28 in petite, regular, and tall.

The FDA Uniform Specification FDA 027 details precise requirements for men's trousers, likely for government procurement. The trousers must be made from a blend of 74% Dacron polyester, 25% worsted wool, and 1% Lycra, in a dark navy blue color. Key design elements include a plain front, specific pocket configurations (quarter top front, watch, two back pockets) with defined minimum openings and depths, and ¾-inch belt loops. Pockets require specific stitching, and back pockets on smaller sizes have a 5-inch opening. The pocketing material is black, 70% polyester/30% cotton plain weave. The 2-inch wide waistband features a crush-proof hook and eye, Stretch Ban-Rol III stiffener, and a continuous closed design. An inner elastic web, a blend of Nylon, Polyester, Neoprene Rubber, Lycra, and Cotton, ensures comfort, breathability, and prevents slippage, with specific stiffness and stretch properties. Inside trim includes fly and crotch linings matching the waistband curtain, with a separate French fly. Belt loop quantity varies by waist size (5, 7, or 9 loops), all ¾-inch wide and double thickness. The trousers require a YKK (or equivalent) brass zipper with specific reinforcement. Permanent modified silicone creases are mandatory for the front and rear trouser legs. All seams must use polyester core thread, with exposed inside seams serged.

The FDA 028 Uniform Specification details the precise requirements for female dark navy stretch trousers, likely for official wear. The trousers must be made from a blend of Dacron® polyester, worsted wool, and Lycra, in a dark navy blue color. Key design elements include a modified ladies' uniform pattern with specific pocket configurations, including quarter-top front pockets and two back pockets with precise dimensions and reinforcement. The waistband will be two inches wide with crush-proof hooks and eyes, incorporating Cool Flex® and Ban-Rol Sofflex™ for comfort and stretch. Other specifications include a minimum of five to seven belt loops depending on size, a YKK (or equivalent) brass zipper, permanently creased legs, and polyester core thread for all seams. Available in petite, regular, and tall sizes from 4-16, these specifications ensure durability, comfort, and a professional appearance for FDA personnel.

This document outlines the Uniform Specification for Male Thermal Pants (Mid-Weight FDA 029 and Heavy-Weight FDA 068) for the Food and Drug Administration. The specifications detail a cotton/wool/nylon blend fabric in a natural/cream color. Key features include an inside layer of 100% combed ring-spun cotton and an outside layer of 50% combed ring-spun cotton, 40% Merino wool, and 10% nylon. All materials must be pre-shrunk, and the pants should feature a comfort waistband, front and back rise, flat seams, a front fly, true sizing, and rib cuffs. Stock sizes range from S to XL. This specification is likely part of a government Request for Proposal (RFP) for procuring clothing items for federal employees.

The Food and Drug Administration (FDA) is soliciting bids for a unisex cream long-sleeve thermal shirt under specification FDA030. The shirt, available in sizes S-XL, features a cotton/wool/nylon blend fabric with a natural/cream color. Key specifications include an inside layer of 100% combed ring-spun cotton and an outside layer of 50% combed ring-spun cotton, 40% Merino Wool, and 10% Nylon. All materials must be pre-shrunk, and the shirt should include a comfort waistband, front and back rise, flat seams, true sizing, rib cuffs, and a mock turtleneck collar. This uniform specification outlines the precise requirements for a durable and comfortable thermal shirt for FDA personnel.

The Food and Drug Administration (FDA) has issued a Uniform Specification, FDA 033, for a white short-sleeve polo shirt. This specification details the required fabric content of 50% polyester and 50% cotton, and the color white. Key vendor style descriptions include a 5.4 oz. wt. pique mesh, chest pocket, relaxed fit, and hemmed sleeves. Customization mandates the FDA badge emblem on the left upper front and the HHS round emblem on the left sleeve. The polo will be available in stock sizes ranging from RG: S – 6XL. This document outlines the precise requirements for vendors supplying these uniform polo shirts to the FDA.

The Food and Drug Administration (FDA) has issued a uniform specification (FDA 033 & FDA 087) for men's white short-sleeve polo shirts. The shirts must be made of 50% polyester and 50% cotton, featuring a 5.4 oz. wt. fabric, a chest pocket, heavy-duty pique mesh, a relaxed fit, and hemmed sleeves. Customization requires an FDA badge emblem on the left upper front and an HHS round emblem on the left sleeve. An optional hook-and-loop (Velcro-style) FDA badge emblem (CLIN# FDA 087) must be available upon request. The polo shirts are to be stocked in regular sizes from S to 6XL.

The FDA 034 Uniform Specification details the precise design and material requirements for a Men's Long Sleeve Navy Shirt with a metal button feature. The shirt fabric is a blend of polyester, worsted wool, and spandex, in a dark navy blue color. Key features include permanent silicone creases, a specialized front pleat, and a banded collar with permanent stays. The shirt incorporates a two-piece yoke, one-piece pointed sleeve plackets, and cuffs designed to accept metal buttons. It has two breast pockets with mitered corners and box-pleats, featuring a pencil stall on the left and woven hook fasteners. Scalloped flaps with woven loop fasteners secure the pockets. A badge tab and epaulets are also specified, with dedicated placements for FDA and HHS emblems. All buttons are dyed to match the fabric.

The Food and Drug Administration (FDA) has issued uniform specifications (FDA 034 & FDA 088) for men's long-sleeve navy shirts, likely for official uniforms or procurement. These specifications detail the fabric composition (74% polyester, 25% worsted wool, 1% spandex), dark navy blue color, and design features. Key elements include metal button compatibility on epaulets, fronts, pocket flaps, and cuffs; permanent military creases; a detailed front placket with six buttons; a banded collar with permanent stays; a lined two-piece yoke; specific sleeve and cuff designs; breast pockets with mitered corners and a pencil stall; scalloped flaps with hook and loop fasteners; a badge tab; and epaulets. The shirts also feature specific emblem placements for the FDA badge and HHS round emblem, with an optional hook-and-loop FDA badge for FDA 088.

The FDA 035 Uniform Specification outlines the detailed requirements for men's short-sleeve navy shirts, designed for Food and Drug Administration personnel. The shirt is made from a blend of polyester, worsted wool, and spandex in a dark navy blue color. Key features include a metal button system on epaulets, fronts, and pocket flaps, permanent military creases, and a convertible collar with fused stays. The design incorporates a self-fabric center pleat on the left front and a revere facing on the right, along with two breast pockets with mitered corners, box-pleats, and a pencil stall on the left. Scalloped flaps with buttonholes and woven fasteners secure the pockets. The shirt also includes a badge tab, epaulets, and specific placements for FDA badge and HHS emblems. Sizes range from Small (14-14.5) to 3XLarge (19-19.5). This specification ensures uniformity and functionality for FDA personnel attire.

The FDA Uniform Specification FDA 035 & FDA 089 details the precise requirements for men's short-sleeve navy shirts with metal button features. These shirts are made from a 74% polyester, 25% worsted wool, and 1% spandex fabric blend in dark navy blue. Key features include permanent silicone creases, a specialized front design for metal buttons, a convertible collar with permanent stays, a two-piece yoke, and one-piece sleeves. The shirt incorporates two breast pockets with mitered corners, box-pleats, and woven hook/loop fasteners on the flaps, which are scalloped. Specific design elements include a badge tab, epaulets for metal buttons, and dyed-to-match buttons. Emblems for the FDA and HHS are precisely placed, with hook and loop (Velcro-style) options available. The document also provides neck sizing for small to 3XLarge shirts.

The FDA Uniform Specification FDA036 details the precise requirements for a Women's Long Sleeve Navy Shirt. The shirt must be made from a blend of polyester, worsted wool, and spandex, in a dark navy blue color. Key features include metal button compatibility on epaulets, fronts, pocket flaps, and cuffs, along with permanent silicone creases. The design specifies a self-fabric center pleat on the right front, a banded collar with permanent stays, and a two-piece lined yoke. Sleeves feature one-piece pointed plackets and two-button cuffs. Breast pockets are designed with mitered corners, box-pleats, and a pencil stall on the left. Scalloped flaps include buttonholes and hook/loop fasteners. A badge tab and epaulets with crease interlining are also required. Buttons must match the fabric color. Specific FDA and HHS emblems are to be attached. The specification includes female sizes, ranging from Regular (32-50 Even) to Tall (34-46 Even). This document ensures standardization and quality for official FDA uniforms.

The FDA Uniform Specification FDA 036 & FDA 090 details the requirements for a Women's Long Sleeve Navy Shirt with Metal Button Feature. The shirt is made from a blend of polyester, worsted wool, and spandex in a dark navy blue color. Key features include permanent military creases, a self-fabric center pleat on the right front, and a left front designed for metal buttons. The collar is banded with 3-inch points, permanent collar stays, and 100% polyester interlinings. The shirt also features a two-piece yoke, one-piece pointed sleeve plackets, and 2¾-inch wide cuffs. Two breast pockets with mitered corners and box-pleats are included, along with scalloped flaps that incorporate woven hook and loop fasteners. Additional elements are a badge tab, epaulets designed for metal buttons, and dyed-to-match buttons. Emblems for the FDA and HHS are specified for placement, with an optional hook and loop FDA badge emblem. The shirts are available in female sizes and fit styles, with long sleeve stock sizes ranging from RG: 32-50 Even and TL: 34-46 Even.

The FDA Uniform Specification FDA 037 outlines the detailed requirements for Women's Short Sleeve Navy Shirts with Metal Button Feature. These specifications cover fabric composition (74% polyester, 25% worsted wool, 1% spandex), dark navy blue color, and the integration of metal buttons on epaulets, fronts, and pocket flaps. Key features include permanent silicone creases, a specific front pleat and facing design, a convertible collar with permanent stays, a two-piece lined yoke, one-piece sleeves, and two breast pockets with box-pleats and a pencil stall. Flaps are scalloped with specific dimensions and buttonholes. The shirt also includes a badge tab, epaulets with metal button features, and dyed-to-match buttons. Emblems for the FDA and HHS are to be attached in specified locations. The document concludes by noting the requirement for female sizes and fit styles.

This document outlines the detailed specifications for FDA Uniform Short Sleeve Navy Shirts for women, identified as FDA 037 and FDA 091. The shirts are made from a blend of polyester, worsted wool, and spandex, in a dark navy blue color. Key features include permanent military creases, a metal button feature on epaulets, fronts, and pocket flaps, and a convertible collar with permanent stays. The design incorporates two breast pockets with box-pleats and a pencil stall on the left, scalloped flaps with hook and loop fasteners, and an inside badge tab. Emblems for the FDA and HHS are specified, with an optional hook and loop FDA badge available. The document emphasizes material composition, garment construction, and emblem placement, detailing specific measurements and finishes for various components to ensure uniformity and functionality for female sizes and fit styles.

The FDA Uniform Specification FDA038 details the precise requirements for a Men's Long Sleeve White Shirt, likely for official or uniform use within the Food and Drug Administration. The shirt's fabric is a 65% polyester/35% rayon blend, permanent press with soil release. Key design elements include die-creased pocket flaps, collar band, and epaulets, along with permanent silicone creases on the front and back. The front features a self-fabric center pleat with six buttons, while the banded collar has 3-inch points and permanent stays. Sleeves include one-piece plackets and two-button cuffs. Two breast pockets with mitered corners and box-pleats are specified, with the left pocket having a pencil stall. Scalloped flaps secure with a button and woven fasteners. A badge tab and pointed epaulets are also detailed. Specific FDA and HHS emblems are required to be attached in designated locations. The document serves as a comprehensive guide for manufacturers to ensure uniformity and adherence to FDA standards.

The FDA Uniform Specification FDA038 & FDA092 details the precise requirements for a Men's Long Sleeve White Shirt, likely for official FDA personnel. The shirt must be 65% polyester/35% rayon, 9.5-10 oz. per linear yard, permanent press with soil release. Key features include die-creased pocket flaps, collar band, and epaulets, permanent modified silicone creases, and specific stitching for the front pleat and yoke. The banded collar has 3-inch points, 100% polyester interlinings, and fused permanent collar stays. Sleeves feature one-piece pointed plackets and two-button cuffs. Breast pockets are 5-3/8" by 5-3/4" with mitered corners, 1-1/2" box-pleats, and a left-pocket pencil stall, secured by woven hook and loop fasteners. Scalloped flaps also have a pencil opening. A badge tab is included, and epaulets are sewn into the sleeve head seam. Emblems for the FDA and HHS are specified for precise placement, with a hook and loop FDA badge option available. This document provides a comprehensive technical specification for the manufacture of these uniform shirts.

The FDA 039 Uniform Specification details the precise requirements for men's short-sleeve white shirts, likely for agency personnel. The shirts are made from a 65% polyester/35% rayon blend, featuring permanent press with soil release. Key design elements include die-creased pocket flaps and epaulets, permanent silicone creases, and a self-fabric center pleat on the left front. The convertible collar has permanent stays, and the yoke is lined with polyester satin. Sleeves are one-piece with a 7/8" hem. Breast pockets are mitered with 1½” box-pleats and a pencil stall on the left. Flaps are scalloped with woven hook and loop fasteners. A badge tab and epaulets are also specified, with precise attachment methods. Labeling includes size, style, manufacturer's WPL, and country of origin. Buttons match the fabric. FDA badge and HHS round emblems are to be attached at specific locations. The document also outlines neck sizes from Small (14-14.5) to 3XLarge (19-19.5).

The FDA Uniform Specification document (FDA 039 & FDA 093) outlines the precise requirements for men's short-sleeve white shirts, likely for agency personnel. The specifications detail fabric composition (65% polyester/35% rayon, 9.5-10 oz/linear yard, permanent press with soil release), color (white), and design elements such as permanent military creases on pocket flaps, epaulets, and the shirt body. It meticulously describes the front placket with seven buttons, a convertible collar with permanent stays, and a two-piece yoke. Sleeve length and construction are specified, along with two breast pockets featuring mitered corners, 1½” box-pleats, and a pencil stall on the left. Die-creased, scalloped flaps include buttonholes and woven hook/loop fasteners for security. Additional features include an inside sling-type badge tab, tapered epaulets, and detailed labeling requirements encompassing size, style, manufacturer, and country of origin. Emblem attachments for the FDA badge and HHS round emblem are specified, with an optional hook-and-loop FDA badge for CLIN# FDA 093. The document concludes with a comprehensive list of neck sizes from Small (14-14.5) to 3XLarge (19-19.5).

The FDA Uniform Specification FDA 040 outlines detailed requirements for a women's long-sleeve white shirt, likely for official or uniform purposes within the Food and Drug Administration. The shirt's fabric must be a 65% polyester/35% rayon blend, permanent press with soil release, and weigh 9.5-10 oz. per linear yard. Key features include die-creased pocket flaps, collar, and epaulets, with permanent silicone creases on the front and back. The design specifies a self-fabric center pleat with six front buttons and one collar band button, a banded collar with permanent stays, and a two-piece lined yoke. Sleeves feature one-piece pointed plackets and two-button cuffs. The shirt includes two breast pockets with mitered corners, box-pleats, and a pencil stall on the left. Scalloped flaps secure with woven fasteners and buttons, with a pencil opening on the left flap. A badge tab, die-creased epaulets, and dyed-to-match buttons are also required. Emblems for the FDA and HHS are to be attached at specific locations. The specification also lists required female sizes and fit styles, including regular (32-50 Even) and tall (34-46 Even) long-sleeve options.

This document outlines the uniform specifications for FDA 040 and FDA 094 Women's Long Sleeve White Shirts. The fabric is a 65% polyester/35% rayon blend, white in color, with permanent press and soil release finishes. Key features include die-creased pocket flaps, collar bands, and epaulets, along with permanent silicone creases. The shirt has a self-fabric center pleat, seven front buttons, and a banded collar with permanent stays. Sleeves feature one-piece plackets and two-button cuffs. Two breast pockets with mitered corners include a pencil stall on the left. Scalloped flaps secure with hook and loop fasteners. A badge tab and die-creased epaulets are also specified. Emblems for the FDA and HHS are detailed, with an option for a hook and loop FDA badge. Available in female long sleeve sizes RG: 32-50 Even and TL: 34-46 Even.

The FDA Uniform Specification FDA 041 outlines the detailed requirements for Women's Short Sleeve White Shirts, likely for procurement through an RFP. The shirts must be made of a 65% polyester/35% rayon blend, white in color, and feature permanent press with soil release finish. Key design elements include die-creased pocket flaps and epaulets, military creases, a self-fabric center pleat on the right front, and a revere facing on the left. The convertible collar includes permanent stays, and the yoke is two-piece and lined. Sleeves are one-piece with specific hemming and stitching. Two breast pockets with mitered corners and box-pleats are required, with a pencil stall on the left. Die-creased, scalloped flaps secure to the pockets with hook and loop fasteners, and the left flap has a pencil opening. Additional features include an inside sling badge tab, epaulets sewn into the sleeve head, and color-matched buttons. Emblems for the FDA and HHS are to be attached at specified locations. Sizing includes female stock sizes in regular and tall fits, ranging from 32-50 even. Shirts are to be individually polybagged.

The FDA Uniform Specification FDA 041 & FDA 095 details the precise requirements for women's short sleeve white shirts, likely for official FDA personnel. The shirt fabric is a 65% polyester/35% rayon blend, weighing 9.5-10 oz, with a permanent press and soil release finish. Key features include die-creased pocket flaps and epaulets, permanent silicone creases, a self-fabric center pleat on the right front, and a revere facing on the left. The convertible collar has permanent stays, and the two-piece yoke is lined with polyester satin. Sleeves are one-piece with specific hemming and stitching. Breast pockets feature mitered corners, box-pleats, and a pencil stall on the left. Die-creased, scalloped flaps secure to the pockets with hook and loop fasteners. A badge tab is located on the left front, and epaulets are sewn into the sleeve head seam. Buttons match the fabric color. Each shirt is individually polybagged. Emblem specifications include an FDA badge emblem centered above the left pocket, with a hook and loop option available, and an HHS round emblem on the left upper sleeve (for CLIN# FDA 095). Required sizes are female fit styles, with stock sizes for long sleeve ranging from RG: 32-50 Even and TL: 34-46 Even.

The FDA Uniform Specification FDA042 outlines the detailed requirements for a unisex short-sleeve pique polo shirt. This specification, likely part of a federal government RFP, describes a white, 100% soft-hand polyester shirt with an oversized fit, soil release, and wickable finish. Key features include a three-tortoise shell button closure with a 6 ½” lined placket, a rib-knit no-curl collar dyed to match, and a hemmed spade-style left breast pocket with triangle tacks. The shirt design specifies a longer back hem with straight tail, ¾” hem, and double-turn hemmed side vents. Sleeves are short set-in with a ¾” cover-stitch hem. Customization includes an FDA badge emblem centered 1” above the left chest pocket and an HHS round emblem centered 1” below the shoulder seam on the left sleeve. The document also provides neck sizes for small through 3XLarge. This detailed specification ensures uniformity and quality for the required apparel.

The FDA Uniform Specification outlines the detailed requirements for unisex short-sleeve pique polo shirts (FDA 042 & FDA 096). The shirts must be 100% soft-hand polyester, white, with an oversized fit, soil release, and wickable finish. Key features include a three-button lined placket, a dyed-to-match rib-knit no-curl collar, and a hemmed spade-style left breast pocket with triangle tacks. The design specifies a longer back hem with side vents and short set-in sleeves. Customization requires an FDA badge emblem centered 1 inch above the left pocket and an HHS round emblem centered 1 inch below the left sleeve's shoulder seam. An optional hook-and-loop FDA badge is available for FDA096. The document also provides specific neck sizes for small through 3XLarge shirts.

The FDA Uniform Specification FDA043 details the requirements for a Unisex Short Sleeve Special Ops Polo. This polo is designed for both technical and professional appearances, made from a 60% cotton/40% polyester blend in dark navy blue. Key features include a no-curl collar with concealed Mylar stays, a 3-button placket, raglan sleeves for enhanced movement, and seamless-gusset straight side panels. Functionality is boosted by three mic holders, including a loop at the placket base and concealed pockets on each raglan sleeve, plus a two-stall pencil pocket on the left sleeve. All seams are safety-stitched and reinforced with twill tape. The polo is individually poly-bagged and adorned with an FDA gold badge emblem and an HHS circular emblem. Available in sizes from Small to 3XLarge, with specific neck measurements.

The FDA Uniform Specification details the design and features of the FDA 043 & FDA 097 Unisex Short Sleeve Special Ops Polo. This polo is made from a 60% cotton/40% polyester blend fabric in dark navy blue, designed for a professional appearance and multi-faceted functionality. Key features include a no-curl collar with Mylar stays, a 3-button placket, raglan sleeves with seamless-gusset side panels for 360-degree movement, and multiple mic holders. The sleeves also include concealed mic pockets and a two-stall pencil pocket. Embellishments include an FDA gold badge emblem on the front and an HHS emblem on the left sleeve, with an optional hook and loop FDA badge. The document specifies precise measurements and stitching details, packaging, and available neck sizes from Small to 3XLarge.

The FDA 042 Uniform Specification outlines the detailed requirements for a Female Navy Short Sleeve Maternity Shirt, made from a blend of polyester, wool, and Lycra in dark navy blue. The shirt is designed for comfort and growth, featuring a banded collar, two scalloped breast pockets with pencil slots, shoulder epaulets, and a badge holder. Key design elements include a 1 3/8-inch wide placket front with 10 buttons, a collar with permanent stays, and specific dimensions for pockets, flaps, sleeves, and epaulets. It also includes reinforcements for a badge and nameplate, low-luster melamine buttons, and customization with FDA and HHS emblems. Stock sizes range from XS to XL.

The FDA Uniform Specification FDA 042 & FDA 098 outlines the detailed design and material requirements for a Female Navy Short Sleeve Maternity Shirt. The shirt, made from a 74% Polyester, 25% Wool, and 1% Lycra blend in dark navy blue, is designed for comfort and ease of movement during pregnancy. Key features include a shaped body, banded collar, two scalloped-flap breast pockets with a pencil slot on the left, an inside sling-type badge holder, shoulder epaulets, and a straight back yoke. The front is slightly longer to accommodate growth and has a 1 3/8” wide placket with ten buttons. Specific dimensions are provided for pockets, flaps, sleeves, collar, and epaulets. The shirt also includes badge and nameplate reinforcements, with all buttons being low-luster melamine matching the shirt color. Customization involves sewing the FDA Round Emblem on the left sleeve and the HHS Badge Emblem on the left upper front, with a Velcro-style FDA badge emblem option available. Stock sizes range from XS to XL.

The U.S. Food and Drug Administration (FDA) has issued Uniform Specification FDA 045 for lightweight black base layer pants for males. These pants must be made of 100% acclimate dry polyester, offering properties such as lightweight feel, machine washability, fade resistance, and anti-microbial features. The color requirement is black, and the pants are expected to be moisture-wicking and breathable for performance in various work environments. Style-wise, they should feature flat seam construction and a male-specific design with a fly. Stock sizes will range from Unisex Small to 2XL.

The U.S. Food and Drug Administration (FDA) has issued a Uniform Specification outlining the requirements for male and female black boot socks (FDA046 and FDA069). These specifications detail material characteristics, style, color, and sizing. The socks must be composed of 74% Wool, 13% Nylon, 8% Acrylic, 3% Polyester, and 2% Lycra, ensuring resistance to tears, runs, shrinkage, and fading, while also being machine washable. Key style features include a boot sock design with ventilation for breathability and moisture-wicking, anti-fatigue support, suitability for hot climates, a medium-weight heel pad to prevent slippage, and low density. All socks must be black and are available in sizes Small to XXL, accommodating a broad range of men's and women's shoe sizes. This document serves as a clear guideline for manufacturers, ensuring uniform quality and performance for these specific items within the federal procurement process.

The U.S. Food and Drug Administration (FDA) has issued a Uniform Specification, FDA 047, for heavyweight black base layer pants for males. These pants are designed for extreme cold weather environments and are made from a blend of 90% acclimate dry polyester and 10% spandex. Key material characteristics include being lightweight, machine washable, fade resistant, and anti-microbial. The color requirement is black. Performance specifications demand moisture-wicking properties, breathability, and a relaxed fit. The style features flat seam construction and a male-specific fit with a fly. Available in unisex sizes from Small to 3X Large, this specification outlines the precise requirements for vendors supplying these garments to the FDA.

The U.S. Food and Drug Administration (FDA) has issued a uniform specification for black crew socks for both males (FDA 048) and females (FDA 070). These socks must be made from a blend of 62% wool, 28% nylon, 7% polyester, and 3% spandex, ensuring moisture-wicking properties and resistance to tears, holes, runs, and shrinkage, while also being machine washable. The style requires an over-the-calf fit with ventilation for breathability, anti-fatigue support, basic cushioning, and a medium weight. Only black socks are required, and they must be unisex. The specification includes a detailed size chart, matching shoe sizes for men and women across small, medium, large, and X-large categories.

The U.S. Food and Drug Administration (FDA) has outlined uniform specifications for a fleece-lined, V-neck, commando-style sweater, identified as models FDA050 and FDA099. This document, likely part of an RFP, details the material characteristics, color, performance requirements, style, customization options, and available sizes. The sweater is to be made from a blend of polyester, worsted wool, and low-pill acrylic, with nylon reinforcement patches on the shoulders and elbows, and a 100% polyester fleece lining. It must be dark navy, machine washable, wind-resistant, breathable, and quick-drying. The design includes a unisex, straight-body style with color-matched reinforcement patches. Customization options include a sewn FDA badge patch over the left breast and an HHS round patch on the upper left arm, with a hook-and-loop FDA badge emblem as an alternative. Sizes range from XS to 6XL.

The U.S. Food and Drug Administration (FDA) has outlined uniform specifications for a fleece-lined, V-neck, Commando-style sweater, identified as model FDA050. This document details the required material characteristics, including a blend of 57% polyester, 28% worsted wool, and 15% low-pill acrylic for the main fabric, 100% nylon for shoulder and elbow patches, and a 100% polyester fleece lining. The sweater is designed in a dark navy color with a 2x1 rib knit fabric type and is machine washable. Performance requirements emphasize wind resistance, breathability, and quick-drying properties. The style is unisex with a straight body, featuring color-matched reinforcement patches on the shoulders and elbows. Customization includes an FDA badge patch over the left breast and an HHS round patch on the upper left arm. The sweater will be available in sizes from XS to 6XL. These specifications are likely part of an RFP for procurement within the federal government.

The U.S. Food and Drug Administration (FDA) has outlined uniform specifications for a 3-in-1 parka, designated as FDA 053. This parka comprises an outer jacket and a removable inner liner, both in dark navy and designed for independent wear or integration. The outer jacket is made of 100% nylon, featuring waterproof and windproof properties, with a length below the waist, full lining, hook and loop storm cuffs, and multiple zippered pockets. Customizations include FDA and HHS patches, along with a hidden ID panel displaying “FDA” in yellow lettering. The inner jacket, or removable liner, is 100% polyester for the shell and 100% nylon for the lining, offering breathability and stretch cuffs. It also includes several pockets and similar FDA and HHS patch customizations. Both components feature two-way zippers for front closure and ventilation, with the liner designed to zip into the outer shell. The parka is available in unisex sizes XS-3XL.

The U.S. Food and Drug Administration (FDA) has released Uniform Specifications FDA 054 for a unisex black lightweight long-sleeve base layer shirt. The shirt must be 100% polyester, 4.0 oz, with a relaxed fit, moisture-wicking, fast-drying, breathable, and anti-microbial protection. It features flat seam construction, dropped shoulder seams, and finished cuffs and hem. The color must be black, and the style is a crew neck with long sleeves, available in sizes S-2XL. Workmanship requires the shirt to be free of defects such as holes, tears, or uneven dyeing, with all seams stitched with matching thread. These specifications are crucial for vendors responding to government RFPs for this item, ensuring quality and consistency.

The U.S. Food and Drug Administration (FDA) has issued uniform specifications (FDA055) for a unisex lightweight, short-sleeve base layer shirt. The document outlines detailed requirements for the garment's fabric, color, style, sizes, and workmanship. Key fabric characteristics include 100% polyester, 4.0 oz. weight, relaxed fit, moisture-wicking, fast-drying, breathable, anti-microbial protection, flat seam construction, dropped shoulder seam, finished sleeves, and machine washability. The shirt must be black, short-sleeve, and crew neck, available in sizes S-3XL. Workmanship standards demand the shirt be free of defects such as holes, tears, misweaves, spots, uneven dyeing, loose or skipped stitches, and must be seamed with matching thread. These specifications are crucial for vendors bidding on government contracts to ensure compliance with FDA standards for this particular item.

The U.S. Food and Drug Administration (FDA) has outlined uniform specifications for a unisex soft-shell jacket (FDA 056 & FDA 100). The jacket will be dark navy blue, made of 94% nylon and 6% elastane for the outer shell, with a double-faced brushed nylon interior, and designed to be wind and water-resistant, lightweight, and machine washable. Key features include an athletic cut, full front zipper, two-way reversible nylon side zippers, and multiple pockets, including two lower zippered pockets and a zippered Napoleon pocket on the upper left front. The jacket will also feature a cinching draw-cord at the front bottom and a stretch-gripping feature at the back. Sleeves will be a modified raglan design with a hook-and-loop fastener for an adjustable fit. Customization includes an official HHS emblem patch on the left shoulder and an FDA officer badge patch on the left upper front chest, with a Velcro-style option available. Stock sizes range from S-XL (short) and S-5XL (regular).

The U.S. Food and Drug Administration (FDA) has outlined uniform specifications for a unisex soft shell jacket, FDA 056. This document details the material characteristics, color, performance requirements, style, and customization for the jacket. Key features include an outer shell of 94% nylon and 6% elastane, a double-faced brushed nylon interior, and a dark navy blue color. The jacket must be wind and water-resistant, lightweight, and suitable for indoor and outdoor wear. Stylistically, it is an athletic cut with a full front zipper, two-way reversible nylon side zippers, and various pockets including lower zippered pockets and a Napoleon pocket. Sleeves are a modified raglan design with an adjustable hook-and-loop fastener. The tunnel collar is 2” high and lined with wicking fabric. Customization includes an HHS emblem patch on the left shoulder and an FDA officer badge patch on the left upper front chest. Stock sizes range from S-XL (short) and S-5XL (regular).

The U.S. Food and Drug Administration (FDA) has issued uniform specifications (FDA 057) for a white, compression-fit base layer t-shirt. This document outlines detailed requirements for material, color, performance, and style. The t-shirt must be made from a blend of 77% acclimate dry polyester and 23% spandex, weighing 4 oz./sq. yard (6 oz.), and possess lightweight, machine washable, fade-resistant, and anti-microbial characteristics. It must be white, moisture-wicking, breathable, and suitable for hot or temperate weather. The design includes flat seam, off-shoulder construction, a crew neck, and short sleeves, with unisex sizing available from Small to 5XL. These specifications are likely intended for procurement purposes within government RFPs, ensuring standardized apparel for specific work environments.

The U.S. Food and Drug Administration (FDA) has issued uniform specifications (FDA059) for a unisex black winter glove. The glove's fabric characteristics include a goatskin palm and a 100% nylon back. It is designed to be wrist-length with options for both hook and loop or elastic wrist closures, featuring a spandex wrist cuff and non-skid material. The required color is black, and stock sizes range from Small to XXL. These specifications likely form part of a procurement document, such as an RFP, detailing the exact requirements for a vendor to supply these gloves to the FDA.

The U.S. Food and Drug Administration (FDA) has issued a Uniform Specification, FDA 060, for a black winter hat. This specification outlines the required material characteristics, color, style, and available sizes for the hat. The material must be 90% polyester and 10% spandex, featuring wind resistance, moisture-wicking properties, and water repellency. The hat's color is specified as black, and its style includes a double-layer fleece-lined fabric with a segmented crown construction. Available sizes are S/M and L/XL. This document serves as a clear guideline for procurement, likely for an RFP or similar government purchasing process.

The U.S. Food and Drug Administration (FDA) has issued a uniform specification for unisex navy t-shirts, available in both long and short sleeves. These shirts, identified as FDA 061 and FDA 064, are made from 100% polyester, designed to be machine washable, fade-resistant, and wrinkle-resistant. The screen printing on the shirts is also specified to resist cracking and peeling. The required color is dark navy blue. Performance requirements include moisture-wicking properties and suitability for both hot and cold environments. Customization involves a yellow official U.S. Food and Drug Administration officer badge patch heat-sealed onto the left upper front chest. The shirts are available in unisex sizes, ranging from extra small to 4X large. This document outlines the precise material, performance, and customization requirements for these FDA uniform t-shirts.

The FDA Uniform Specification document outlines detailed requirements for Women's 100% Cotton Long Sleeve Shirts (FDA062 & FDA101). These specifications cover fabric, color (Dark Navy), and construction elements such as creasing, front design, banded collar, yoke, sleeves, pockets, flaps, and epaulets. Key features include wrinkle-resistant cotton fabric, permanent military creases, specific button spacing, adjustable cuffs, and breast pockets with a pencil stall on the left. Customization involves an FDA badge emblem above the left chest pocket and an HHS round emblem on the left sleeve, with an optional hook and loop FDA badge available. Garments must include permanent size labels, style number, fiber content, care instructions, and country of origin. Buttons are dyed to match the fabric, and shirts are individually polybagged. The document also specifies available female sizes and fit styles, including Regular (32-50 Even) and Tall (34-46 Even) long sleeve sizes. This comprehensive document serves as a standard for procurement within federal government RFPs.

The FDA Uniform Specification FDA062 outlines detailed requirements for a women’s 100% cotton long-sleeve shirt, intended for federal government procurement. This specification, a counterpart to FDA 012, mandates a wrinkle-resistant twill fabric in dark navy. Key design elements include die-creased pocket flaps, collar bands, and epaulets, along with five permanent military creases. The shirt features a self-fabric center pleat, a button stand with seven buttons, a banded collar with permanent stays, and a two-piece yoke. Sleeves have one-piece plackets and adjustable cuffs. Two breast pockets with box-pleats and mitered corners are specified, including a pencil stall on the left. Scalloped flaps with hook and loop fasteners cover the pockets. Epaulets are sewn into the sleeve head seam, tapering to a pointed end. Customization includes FDA and HHS emblems. Each garment requires specific labeling, and buttons must match the fabric color. Individual polybagging is specified, with female sizes ranging from RG: 32–50 Even and TL: 34–46 Even.

The Food and Drug Administration (FDA) Uniform Specification FDA063 details the requirements for a Women's 100% Cotton Short Sleeve Shirt, a female counterpart to FDA 013. This specification outlines the fabric, color, and construction of the shirt, including specific details for creasing, front design, convertible collar, yoke, sleeves, pockets, flaps, and epaulets. Key features include a dark navy, 6.0 oz. per square yard, 100% wrinkle-resistant twill fabric with a pre-cured durable press finish. The design incorporates permanent military creases, two breast pockets with box-pleats and woven hook/loop fasteners, and die-cut, scalloped flaps. Epaulets are sewn into the sleeve head seam and are die-creased. Customization includes an FDA badge emblem above the left chest pocket and an HHS round emblem on the left sleeve. Labeling requires permanent size, style, cut, fiber content, WPL number, care instructions, and country of origin. Buttons are dyed to match the fabric. The required sizes are female-specific, including regular (32-50 Even) and tall (34-46 Even) stock sizes. This document serves as a comprehensive guide for manufacturing the specified uniform shirt.

The FDA Uniform Specification details the requirements for FDA 063 & FDA 102 Women’s 100% Cotton Short Sleeve Shirts, a female version of FDA 013. The shirts must be made of dark navy, 6.0 oz. per square yard, 100% wrinkle-resistant twill with a pre-cured durable press finish. Key features include die-creased pocket flaps and epaulets, permanent military creases, a convertible collar with fused stays, and a two-piece yoke. The front has seven buttons, a self-fabric center pleat on the left, and a revere facing on the right. Sleeves are one-piece with a 7/8" hem. Two breast pockets with mitered corners and box-pleats include a pencil stall on the left. Flaps are scalloped with a centered buttonhole, and both pockets and flaps have hook and loop fasteners. Epaulets are sewn into the sleeve head seam, tapered, box-stitched to the shoulders, and feature a buttonhole at the pointed end with a corresponding button on the yoke. Customization includes an FDA badge emblem above the left chest pocket flap and an HHS round emblem on the left sleeve; a hook and loop FDA badge emblem option is available. Each garment requires specific labeling regarding size, style, fiber content, and care instructions. Buttons must match the fabric color. Required sizes are female fit styles, with stock sizes RG: 32–50 Even and TL: 34–46 Even.

The FDA Uniform Specification details the design and material requirements for the FDA 063 and FDA 102 Women's 100% Cotton Short Sleeve Shirt, a female version of the FDA 013. The shirt must be made from dark navy, 6.0 oz. per square yard, 100% wrinkle-resistant twill fabric with a pre-cured durable press finish. Key features include die-creased pocket flaps and epaulets, permanent military creases, a convertible collar with fused stays, and a two-piece self-goods yoke. Specifics for the front design, sleeves, and two breast pockets with pencil stalls and hook/loop fasteners are provided. Customization includes an FDA badge emblem 1/2" above the left chest pocket and an HHS round emblem on the left sleeve, with a Velcro-style FDA badge option available. Labeling must include size, style, fiber content, and care instructions. Buttons must match the fabric color. The required female sizes range from RG: 32-50 Even and TL: 34-46 Even.

The Food and Drug Administration (FDA) has issued a Uniform Specification (FDA072) for white women’s 100% cotton short-sleeve polo shirts. This specification outlines the required fabric content, color, and vendor style description, which includes features like a chest pocket, heavy-duty pique mesh, relaxed fit, and hemmed sleeves. A key requirement is the customization with the FDA emblem on the left upper front and left sleeve. Additionally, a hook-and-loop (Velcro-style) FDA badge emblem option must be available upon request as an alternative to a sewn badge. The shirts are to be available in regular sizes from S to 6XL. This document is likely part of an RFP for procuring uniforms for FDA personnel, detailing precise requirements for quality, design, and customization.

This document outlines the specifications for a White Women’s Short Sleeve Polo for the Food and Drug Administration (FDA), likely part of a federal government Request for Proposal (RFP). The uniform specification, FDA072, details a 100% cotton white polo with a chest pocket, heavy-duty pique mesh, relaxed fit, and hemmed sleeves. Customization requirements include the FDA emblem on the left upper front and left sleeve. An optional hook and loop (Velcro-style) FDA badge emblem must also be available. The polo will be supplied in stock sizes ranging from S to 6XL. This document serves as a clear guide for vendors to produce compliant uniforms for FDA personnel.

The FDA Uniform Specification FDA 073 outlines the requirements for "U Tan Thermal Pant, Mid-Weight." These pants are made from 100% Acclimate® Dry Polyester - Eyelet Mesh in a natural tan color. Key features include a weight of 4.0 oz./sq. yd. (114 grams), men's regular/relaxed fit, superior wicking and drying through Acclimate® Dry Moisture Management, and Ag47® Anti-Microbial / Anti-Odor Protection. They are designed for complete coverage and comfort, with Clean Seam® next-to-skin comfort, a superior hand/feel, UPF UV Protection of 35+, and are durable, breathable, and won't shrink. The pants are available in sizes Small through XXL. This specification is likely part of a federal government RFP for procurement of apparel.

The FDA 074 Uniform Specification outlines the requirements for the U Tan Thermal LS Shirt Mid-Weight. This garment is made from 100% Acclimate® Dry Polyester eyelet mesh in natural tan. Key features include 4.0 oz./sq. yd. weight, Acclimate® Dry Moisture Management for superior wicking and drying, Ag47® Anti-Microbial/Anti-Odor Protection, appropriate rise depth and height for complete coverage and comfort, Clean Seam® for next-to-skin comfort, a superior hand/feel, UPF UV Protection of 35+, and durability, breathability, and shrink resistance. The shirt is available in sizes Small through XXL. This specification is likely part of a federal government RFP for procurement of apparel.

The U.S. Food and Drug Administration (FDA) has issued uniform specifications (FDA 075 and FDA 103) for a 3-in-1 parka, comprising an outer jacket and a removable inner liner. The outer jacket must be 100% nylon, waterproof, windproof, and dark navy, featuring a below-waist length, full lining, hook and loop storm cuffs, and multiple zippered pockets. Customizations include FDA and HHS patches, a hidden back ID panel with “FDA” in yellow, and an optional Velcro-style FDA badge. The inner jacket/removable liner, made of 100% polyester shell and 100% nylon lining, must be breathable and dark navy. It is designed to be worn independently or zipped into the outer shell, with stretch cuffs and zippered side vents. It includes two zippered hand pockets and two hidden inside pockets. Customizations for the liner also specify FDA and HHS patches and an optional Velcro-style FDA badge. Both components require specific two-way and ventilation zippers. The parka will be available in unisex sizes XS-5XL.

The FDA Uniform Specification details the requirements for men's light blue short-sleeve shirts (FDA 076 & FDA 106). These shirts must be made from 4.5 oz. stretch poplin fabric in light blue, available in sizes SM to 4XL. Key features include break-resistant melamine buttons, a convertible collar, pleated pockets with hook and loop closure, permanent creases, heavy-duty interlining in critical areas, a center front placket, and a badge tab reinforced to accommodate body armor. The specification also mandates the placement of FDA badge and HHS round emblems. An optional hook and loop (Velcro-style) FDA badge emblem is available upon request (CLIN# FDA106). This document serves as a standard for procurement, ensuring uniformity and specific functional requirements for FDA personnel uniforms.

The document outlines the uniform specifications for the US Food and Drug Administration (FDA) Women’s Light Blue Shirt, designated as FDA 077 and FDA 107. The shirt fabric is a 4.5 oz. stretch poplin in light blue, available in sizes SM-4XL. Key features include short sleeves, break-resistant melamine buttons, a convertible collar, pleated pockets with scalloped flaps and hook-and-loop closures, permanent creases, heavy-duty interlining, a center front placket, and a reinforced badge tab and epaulets designed for body armor. Emblems required are the FDA badge, positioned ½” above the left pocket, and the HHS round emblem, placed 1 ½” below the left upper sleeve seam. An optional hook-and-loop FDA badge emblem is available upon request. This specification ensures uniformity and functionality for FDA personnel attire.

The FDA Uniform Specification FDA 104 (formerly FDA031) and FDA 085 outlines the requirements for a Unisex Short Sleeve Tactical Shirt. The shirt is made of a 65% polyester and 35% cotton blend, in dark navy blue. Key features include two bellowed chest pockets with drain holes, a pencil opening on the left pocket, shoulder epaulets, fused flaps and collar, reinforced elbow patches, button tab cuffs, a concealed 5-button placket, felled side seams and sleeves, and a tapered tail. Customization requires an FDA badge emblem on the left upper front and an HHS round emblem on the left sleeve, with an optional hook and loop FDA badge available (CLIN# FDA085). The document also specifies neck sizes ranging from Small (14-14.5) to 3XLarge (19-19.5).

The Food and Drug Administration (FDA) has issued a uniform specification for a Unisex Long Sleeve Tactical Shirt, identified as FDA 105 (formerly FDA 032) and FDA 086. This specification details a shirt made of 65% Polyester and 35% Cotton, in a dark navy blue color. Key vendor style descriptions include a two-pocket design with bellowed chest pockets and drain holes, a pencil opening on the left pocket, shoulder epaulets, fused flaps and collar, reinforced elbow patches, and button-tab cuffs. The shirt also features a concealed 5-button placket, felled side seams and sleeves, and a tapered tail for tucking in. Customization requires an FDA badge emblem on the left upper front and an HHS round emblem on the left sleeve. An optional hook and loop (Velcro-style) FDA badge emblem is available upon request under CLIN# FDA 086. This document outlines the specific requirements for tactical shirts, ensuring uniformity and adherence to FDA standards.

The FDA 108 Unisex Navy Fleece Vest specification outlines the requirements for a uniform vest for the Food and Drug Administration. The vest must be made of 100% polyester anti-pill fleece in navy color. Key features include a fleece chin guard, concealed brushed tricot-lined lower pockets, and an audio port access through an inside pocket. Emblems include an FDA badge emblem attached to the left upper front, with an option for a hook and loop (Velcro-style) FDA badge emblem available upon request. This document serves as a uniform specification for federal government procurement, ensuring standardized attire for FDA personnel.

The document outlines the uniform specifications for an FDA Unisex Navy Fleece Vest (FDA 108 & FDA 109), likely intended for procurement through a federal government Request for Proposal (RFP). The vest is made of 100% polyester anti-pill navy fleece and features a fleece chin guard, concealed brushed tricot-lined lower pockets, and audio port access. A key detail is the FDA badge emblem, which must be attached to the left upper front, centered. The specification also provides an option for a hook and loop (Velcro-style) FDA badge emblem (CLIN # FDA109) as an alternative to a sewn badge when requested. This document serves as a detailed guide for potential vendors to ensure compliance with FDA's uniform requirements.

This document outlines the specifications for a Long Sleeve Mock-Turtleneck, Navy Shirt, identified as FDA-110, for the Food and Drug Administration. The shirt is to be made of 100% polyester in navy blue. Key product characteristics include a generous fit, extra-long tails, seamless neck, cuffs, and body, and reinforced shoulder seams. Customization requires "FDA letters" to be embroidered on the neck. This document likely serves as part of a federal government Request for Proposal (RFP) or a similar procurement document, detailing the specific requirements for vendors to supply uniforms to the FDA.

This document outlines the specifications for FDA – 111 Male Navy TDU Tactical Trousers. These trousers are made from a 65/35 poly-cotton micro rip-stop fabric, weighing 6.4 oz., and are midnight navy in color. Key characteristics include a durable 2-way mechanical stretch fabric, an 8-pocket design, 7 belt loops, a flex waist, and a gusseted crotch. Additional features include gusseted cargo pockets with inside compartments, nylon-reinforced pockets with hook and loop flaps, side magazine pockets, reinforced knees that accommodate knee pads, and a Teflon Shield and stain-repellent finish. The trousers are available in stock sizes from 28-54 waist. This document serves as a detailed product description, likely for procurement purposes within a government RFP.

The FDA-112 Uniform Specifications document outlines the detailed requirements for Women's Navy TDU Tactical Trousers. These trousers must be made from a 65/35 poly-cotton micro rip-stop fabric, weighing 6.4 oz., and be Midnight Navy in color. Key product characteristics include a durable two-way mechanical stretch fabric, an eight-pocket design, seven belt loops, a flex waist, and a gusseted crotch. Additional features are gusseted cargo side pockets with internal compartments, nylon-reinforced pockets with hook and loop flaps, side magazine pockets, and reinforced knees designed to accommodate knee pads. The trousers must also have a Teflon Shield and stain-repellent finish. No customization is specified, and stock sizes range from 2 to 20. This document serves as a comprehensive guide for procurement within the federal government, ensuring all vendors meet the exact specifications for these tactical trousers.

The FDA-113 Unisex Rain Jacket specification outlines the requirements for a rain jacket for the Food and Drug Administration. The jacket must be made of 100% Polyester Plain Weave 2.5L fabric, offering 10K/10K waterproof and breathable protection, fully seam-sealed with a DWR finish. Key features include a two-way center front zipper with an external storm flap, an ergonomic fit with articulated sleeves, a stationary hood with multiple adjustments, and hand zip pockets. Stitching requires 10-12 stitches per inch, with internal seams taped for waterproofing and bartacks at stress points. YKK® zippers are specified for all closures. The jacket color is black, with customization requiring an FDA badge patch on the upper left chest and an HHS patch on the upper left shoulder. This document serves as a uniform specification for federal government procurement.

This document outlines the specifications for a uniform FDA 114 Long Sleeve Navy T-Shirt. The shirt must be 100% cotton, dark navy in color, and feature an extra-long trunk, a one-inch collar, double-needle tailoring at the shoulder, and a spandex ribbed crew neck. Branding will include an FDA Heat Seal applied to the left chest. These specifications are likely part of a government Request for Proposal (RFP) for the procurement of these uniform shirts.

This document outlines the uniform specifications for an FDA 115 Short Sleeve Navy T-Shirt. The shirt must be made of 100% cotton in a dark navy color, featuring an extra-long trunk, a one-inch collar, double-needle tailoring at the shoulder, and a spandex ribbed crew neck. A heat-sealed FDA badge will be applied to the left chest. These specifications are likely part of a government Request for Proposal (RFP) for the procurement of these specific uniform items, ensuring consistency and adherence to agency standards.

The U.S. Food and Drug Administration (FDA) has issued a uniform specification for a Navy Boonie Hat. This specification outlines a military-style boonie hat, generally conforming to MIL-H-44105B but with specific exceptions. Key characteristics include an adjustable sizing strap, a map pocket in the crown, no crown loops, and a basic material of 65% polyester/35% cotton rip-stop fabric. The hat must also feature a stiffened brim, four brass screen vents, and an adjustable chin strap. It must be Navy color (FED-STD 595C color chip 35044) and available in one-size-fits-all unisex sizing. Workmanship must be free of defects. Manufacturers are required to certify that the product meets these salient characteristics and conforms to their own standards, with the government reserving the right to verify conformance. A key customization is the inclusion of yellow “FDA” letters stitched on the front top of the hat.

The U.S. Food and Drug Administration (FDA) has issued a uniform specification for a black, Ushanka-style fur cap made from 100% sheepskin/lambskin mouton fur. This specification outlines key characteristics such as a single mouton crown with a quilted insulating liner, a stiffened visor with a snap retainer, and half-length fold-down ear flaps with a chin/retention strap. The cap must be available in unisex sizes from extra small to double extra large and be free of any defects. Manufacturers are required to certify that their product meets these salient characteristics and conforms to their own quality assurance practices, reserving the government's right to request proof of conformance before delivery. This document serves as a standard for procurement within the federal government, likely for law enforcement or other relevant personnel.

The Food and Drug Administration (FDA) has issued uniform specifications for safety vests, identified as FDA-016. These vests are to be made of 100% polyester in yellow and feature a hook and loop front closure, adjustable sides, and 2-inch silver reflective striping. Customization includes

This document outlines the detailed specifications for various FAMS Duty Uniform (FDU) items, including combat shirts, headwear, tactical pants, crew shirts, parka jackets, performance polo shirts, and boots, categorized by gender where applicable. The uniform items are designed for constant use and require high quality, durability, and specific fabric compositions like Poly/Cotton, Nylon/Cotton, or 100% Polyester for shirts, Rip-Stop for pants and boonie hats, and leather/nylon/rubber for boots. Embellishments such as the DHS Seal and

This document, "Consolidated FEMA Uniform Specifications," outlines detailed requirements for various FEMA uniforms and gear, categorized into general FEMA, FEMA Region X Extreme Cold Weather (ECW), and FEMA Corps specifications. It covers items such as tactical pants, jackets, hats, shirts (long and short sleeve, polo, button-down, and tactical), hoodies, and a mobile operations bag, specifying colors, fabric types, sizing (men's, women's, unisex), and specific features like pockets, closures, and resistance properties (fade, wrinkle, water, stain). The ECW gear includes undershirts, drawers, bib overalls, parkas, mittens, gloves, and balaclavas, designed for arctic conditions with detailed descriptions of materials, fit, and laundering. FEMA Corps uniforms, including tee shirts, polo shirts, hoodies, and jackets, feature specific branding with DHS/FEMA and NCCC logos, along with precise measurements and design layouts for silk screen or patched applications. The document emphasizes material quality, functional design, and specific sizing for all items, with customization packages provided to contract awardees for embroidered or silk-screened logos and text.

The Consolidated FEMA Uniform Specifications outline detailed requirements for various FEMA uniform items. These include the FEMA 138 Unisex Lightweight Jacket, FEMA 137 Unisex Lightweight Vest, FEMA 136 Men’s Short Sleeve Polo Shirt, and FEMA 135 Men’s Long Sleeve Polo Shirt. Each item specifies color (primarily Navy Blue or Navy, with white also available for the long-sleeve polo), fabric type (lightweight, windproof, water-resistant for jackets/vests; 100% polyester, moisture-wicking for polo shirts), style features (e.g., pockets, zippers with flap seals, three-button plackets), and sizing (ranging from S to 4X or 5X for men). All items require specific customization: a removable DHS seal with FEMA for the jacket and vest, and an embroidered DHS Patch with FEMA for the polo shirts, all located on the upper left chest area. This document serves as a guide for procurement, ensuring uniformity and adherence to brand standards for FEMA personnel attire.

The provided document, titled "Field Operations Uniform Specifications," outlines detailed requirements for various uniform items under the FAMS-FO series, likely for the Federal Air Marshal Service (FAMS) Field Operations. The specifications cover male and female tactical light-weight pants (FAMS-FO-001, FAMS-FO-002), short and long-sleeve performance polos (FAMS-FO-003, FAMS-FO-004, FAMS-FO-005, FAMS-FO-006), short-sleeve T-shirts (FAMS-FO-007), male and female crew shirts (FAMS-FO-008, FAMS-FO-009), an adjustable hat (FAMS-FO-010), male and female 5-in-1 jackets (FAMS-FO-011, FAMS-FO-012), a rigger belt (FAMS-FO-013), a poly vest (FAMS-FO-014), and a watch cap (FAMS-FO-015). Each item includes specific details on color, style, fabric composition, and sizing. Many items also feature embellishment requirements, such as DHS seals, "FAMS," and "INSTRUCTOR" text, with details on size, font, and application method (e.g., patch, embroidery, heat seal, silk-screen). The document consistently emphasizes high quality, durability, and the ability of garments to withstand constant use while maintaining integrity, shape, and color. This file serves as a comprehensive guide for procurement, ensuring standardized and high-performance uniforms for field operations personnel.

The FLETC-088 document outlines the specifications for ICE Navy SS T-shirts, likely for a federal government Request for Proposal (RFP) or procurement. The T-shirt must be 100% polyester, navy in color, and possess moisture-wicking and odor-fighting characteristics to keep the wearer cooler. A key customization requirement is the screen printing of the ICE Officer Badge on the left upper front of the shirt. Available stock sizes range from SS/XS to SS/4XL.

The Federal Law Enforcement Training Center (FLETC) has issued technical specifications for student gym apparel, specifically a long-sleeved sweatshirt. This document, FLETC TECH SPEC #01, details the required fabric composition (50% cotton/50% polyester, 8 oz. heavyweight fleece), royal blue color, and available sizes (SM – 5XL). A key requirement is the screen-printed DHS logo with "FLETC" lettering underneath, positioned on the left breast with an approximate size of 3” W x 4” H. The logo's ink colors are specified as PMS Cool Gray, with Wilflex Ink Russell Gray - 13300 for the complete logo. This specification ensures standardization for items provided to FLETC students.

FLETC TECH SPEC #02 details the technical specifications for student gym sweatpants for the Federal Law Enforcement Training Center. These sweatpants are to be made of 50% cotton/50% polyester, 8 oz. heavyweight fleece, royal blue in color, with elastic ankles, a drawstring elastic waist, and side pockets. Available in sizes SM – 3XL, they will feature the DHS logo with FLETC lettering screen-printed on the standard left hip, approximately 3”W x 4”H. The screen print will use specific WILFLEX ink colors (Russell Gray - 13300) with a white base (MS Cool Gray 6) for the logo and lettering. This document, created on 05/23/2018, serves as a technical guideline for procurement of these specific uniform items.

This document outlines the technical specifications for a women's student moisture management gym t-shirt for the Federal Law Enforcement Training Center (FLETC). The t-shirt, made of 100% polyester wicking knit, will be Carolina Blue and available in sizes XS-4XL. It features a ladies' fit, V-neck collar, set-in raglan sleeves, and a curved tail. The shirt will include a screen-printed DHS logo with "FLETC" lettering underneath, positioned on the left breast, using dark blue PMS 2955C ink. The specifications detail the logo's approximate size and placement, as well as the screen printing technology and cure temperature requirements.

This document, FLETC TECH SPEC #04, details the technical specifications for men's student moisture management gym t-shirts for the Federal Law Enforcement Training Center (FLETC). It specifies a 100% polyester wicking knit fabric in Carolina Blue, available in sizes XS to 6XL. The t-shirt will feature a screen-printed DHS logo with "FLETC" lettering below it, approximately 3" W x 4" H, placed on the left breast. The ink colors for the logo are Genesis Navy (60000) for the DHS and FLETC lettering, using polyester ink technology with a cure temperature of 330°F or less. Key features include moisture-wicking properties, a heat-sealed label, self-fabric crew neck, double-needle cover-stitched collar and armholes, set-in sleeves, double-needle hemmed sleeves and bottom, and a tag-less stamped size label for comfort. The fabric weight is 4.0 oz./square yard. This document is likely part of a Request for Proposal (RFP) for procuring these specific uniform items.

This document outlines the technical specifications for Staff/Student Unisex 9-inch Moisture Management Gym Shorts for the Federal Law Enforcement Training Center (FLETC). The shorts must be made of 100% Polyester Wicking Mesh, navy blue in color, and available in sizes 3XL and 4XL. Key features include moisture-wicking properties, a full-cut design, a covered elastic waistband with an inside draw-cord, a 9-inch inseam, and a double-needle hemmed bottom. The fabric weight is specified as 5.3 oz./square yard. A DHS logo with “FLETC” lettering, approximately 3” W x 4” H, must be screen printed on the left leg, 3” from the bottom hem and 3 ½” from the side hem. The screen print must use polyester ink technology with a cure temperature of 330°F or less, with specific WILFLEX ink colors for the logo (Russell Gray - 13300) and a white base (PMS Cool Gray 6). The document was created on May 23, 2018.

This document outlines the technical specifications for a women's staff moisture management gym t-shirt for the Federal Law Enforcement Training Center (FLETC). The t-shirt is made of 100% polyester wicking knit in silver gray and comes in sizes XS-4XL. It features a DHS logo with "FLETC" lettering screen-printed below it on the left breast, measuring approximately 3" W x 4" H. The screen print uses Wilflex Genesis Navy-60000 ink for the logo and lettering, specifically a Dark Blue PMS 2955C, applied with polyester ink technology at a cure temperature of 330°F or less. Key features include a ladies' fit, heat-sealed label, V-neck collar, double-needle cover-stitched collar and armholes, set-in raglan sleeves, double-needle hemmed sleeves and bottom, a curved tail, and a tag-less size label. The fabric weight is 4.0 oz./square yard. The document was created on 05/23/2018.

This document outlines the technical specifications for a Men's Staff Moisture Management Gym T-Shirt for the Federal Law Enforcement Training Center (FLETC). The t-shirt must be 100% polyester wicking knit, silver gray, and available in sizes XS-6XL. It requires a screen-printed DHS logo with "FLETC" lettering underneath, positioned on the left breast, approximately 3" W x 4" H. The ink colors for the logo and lettering must be Dark Blue PMS 2955C using Genesis Navy-60000 Wilflex ink. The screen print process must use polyester ink technology with a cure temperature of 330°F or less. Key features include moisture-wicking properties, a heat-sealed label, self-fabric crew neck, double-needle cover-stitched collar and armholes, and double-needle hemmed sleeves and bottom. The fabric weight is specified as 4.0 oz./square yard.

This document outlines the technical specifications for custom-printed sweatshirts for the Federal Law Enforcement Training Center (FLETC) Staff Gym. The sweatshirts are to be long-sleeve, ribbed knit, made of a 50% cotton/50% polyester heavyweight fleece (8 oz.), and ash in color. They will feature the DHS logo with "FLETC" lettering screen-printed below it on the left breast. The logo will be approximately 3" W x 4" H and use PMS Pantone 2955C (Match Royal Blue 60200 Wilflex Ink). Available sizes range from SM to 5XL. The document includes details on fabric, color, sizing, logo placement, and ink colors, indicating a procurement requirement for FLETC apparel.

This document, FLETC TECH SPEC #09, outlines the technical specifications for staff gym sweatpants for the Federal Law Enforcement Training Center (FLETC). It details the required fabric composition (50% cotton/50% polyester, 9.5 oz. heavyweight fleece), color (Navy Blue), and available sizes (SM – 3XL). Key features include elastic ankles, a drawstring elastic waist, and side pockets. The sweatpants must be screen-printed with the DHS logo and FLETC lettering, located on the left hip, with an approximate size of 3” W x 4” H. Specific ink colors (Russell Gray - 13300 and MS Cool Gray 6 with a white base) for the logo are also provided. This specification ensures uniformity and adherence to branding guidelines for FLETC staff apparel.

The Federal Law Enforcement Training Center (FLETC) has issued Technical Specification #10 detailing requirements for instructional staff t-shirts. These t-shirts must be 60% cotton and 40% polyester, heavyweight 8oz. fabric, in maroon color, and available in sizes SM to 5XL. They are to be screen printed with the DHS logo on the left breast, approximately 3.5” W x 4” H, using specific ink colors (PMS Cool Grey/Russell Grey - 13300). This document outlines the precise specifications for the apparel, including material, color, sizing, and logo details, indicating a procurement or uniform standard within the FLETC for its instructional staff.

The Federal Law Enforcement Training Center (FLETC) has issued technical specifications for a women's short-sleeve IRS polo shirt, identified as FLETC TECH SPEC #117. The polo is to be 100% polyester, black, and available in sizes S-3XL. It features a 3-inch wide by 4-inch high logo placement on the left upper chest. Key features include snag, fade, shrink, and wrinkle resistance, wicking fabric with an antimicrobial finish, industrial-strength melamine buttons, and a pen pocket. The document was created on May 5, 2025.

The Federal Law Enforcement Training Center (FLETC) has issued Technical Specification #118 for men's short-sleeve IRS polo shirts. These specifications outline the requirements for a 100% polyester, black polo shirt, available in sizes S-3XL. Key features include snag, fade, shrink, and wrinkle resistance, wicking fabric with an antimicrobial finish, industrial-strength melamine buttons, and a pen pocket. The shirt will feature a 3" wide by 4" high logo placed on the left upper chest. The document was created on May 5, 2025.

This document, FLETC TECH SPEC # 119, outlines the technical specifications for a unisex black Bureau of Prisons ball cap for the Federal Law Enforcement Training Center (FLETC). Key specifications include 100% polyester fabric, black color, available sizes M and XXL, and a logo approximately 2.5” wide by 2.5” high placed ½ inch above the bill. A notable feature is the Velcro backing. The document was created on May 5, 2025, and is a technical specification likely used for procurement within a government RFP context.

The Federal Law Enforcement Training Center (FLETC) has issued Technical Specification #12 for an instructional staff women's tactical polo shirt. This specification details the required characteristics for the polo, including its 100% Jersey Knit Polyester fabric, Dark Navy color, and available sizes from SM to 4XL. Key features include snag-free, shrink, wrinkle, and fade-resistant fabric, moisture-wicking material, a stay-flat collar, collar bone and front mic-clip pockets, and dual pen pockets on the left sleeve. The polo must feature an embroidered DHS seal on the left breast, with specific dimensions and placement based on shirt size. The document meticulously outlines the thread colors for each element of the DHS logo, including the outer circle (gray), inner circle (red), inner wording, eagle, leaves, inner fill (navy light & white), shield (navy light, white, royal blue, & Kelly green), and arrows (white). Additionally, "FLETC" must be embroidered in white lettering underneath the DHS seal. This document serves as a detailed guideline for vendors to produce compliant apparel for FLETC instructional staff.

This document outlines the technical specifications for Unisex Navy Student BDU Shorts for the Federal Law Enforcement Training Center (FLETC). The shorts are made from a 65% polyester/35% cotton blend in navy blue, available in sizes S-XXL. Key features include adjustable waist tabs, a 10-inch inseam, felled seams for durability, fused pocket flaps for a professional look, and a 6-pocket design with drain holes in the bellowed pockets. The FLETC logo will be embroidered directly above the waistband, indicating the garment size. This document, created on May 5, 2025, serves as a standard specification for procurement within government RFPs.

The Federal Law Enforcement Training Center (FLETC) has issued technical specifications for Unisex Navy Student BDU Pants. These specifications detail the required fabric composition (40% Polyester/60% Cotton), color (navy), and available sizes (S-3XL). The pants must feature a 6-pocket design, durable drawstring leg closures, a zipper fly with button closure, felled seams, fused pocket flaps, adjustable waist tabs, and reinforced knees. A specific embroidery of "FLETC" followed by the garment size is required directly above the waistband. The document, created on May 5, 2025, outlines the essential characteristics for these uniform pants, likely for procurement through an RFP process.