66--ROLL TRIM ACTUATOR
ID: N0038325QB078Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP WEAPON SYSTEMS SUPPORTPHILADELPHIA, PA, 19111-5098, USA

PSC

AUTOMATIC PILOT MECHANISMS AND AIRBORNE GYRO COMPONENTS (6615)

Original Source

https://sam.gov/opp/8ef13f76a9d04764860ac1d51304cb5a/view
Timeline
    Description

    The Department of Defense, through the NAVSUP Weapon Systems Support office, is seeking to procure six (6) roll trim actuators, specifically NSN 7R-6615-011585748-VH, from MOOG INC, the Original Equipment Manufacturer (OEM). This procurement is for Foreign Military Sales (FMS) spares essential for the CH-53 aircraft, and the government has determined that MOOG INC is the only known source capable of providing the necessary repair support due to the lack of available drawings or data for alternative suppliers. Interested parties must submit their capability statements or proposals by January 28, 2025, with the solicitation expected to be issued on December 28, 2024. For further inquiries, contact Sophia L. Pugh at sophia.l.pugh.civ@us.navy.mil.

    Point(s) of Contact
    SOPHIA L. PUGH, N733.05, PHONE (215)697-4946, FAX (215)697-1227, EMAIL SOPHIA.L.PUGH.CIV@US.NAVY.MIL
    SOPHIA.L.PUGH.CIV@US.NAVY.MIL
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    66--ROLL TRIM ACTUATOR
    Currently viewing
    Presolicitation
    Similar Opportunities
    66--ROLL TRIM ACTUATOR
    Active
    Dept Of Defense
    The Department of Defense, through the NAVSUP Weapon Systems Support office, is seeking to procure six (6) Roll Trim Actuators for the CH-53 helicopter, specifically identified by NSN 7R-6615-011585748-VH and part number A28507-002. This procurement is intended to be conducted on a sole source basis with MOOG Inc., the Original Equipment Manufacturer (OEM), as they are the only known source capable of providing the necessary repair support for this component. The anticipated solicitation will be issued on December 30, 2024, with a response deadline of January 30, 2025, and interested parties are encouraged to submit their capabilities and qualifications to the primary contact, Sophia L. Pugh, via email at sophia.l.pugh.civ@us.navy.mil.
    66--ROLL TRIM ACTUATOR
    Active
    Dept Of Defense
    The Department of Defense, through the NAVSUP Weapon Systems Support office, is seeking to procure ten (10) Roll Trim Actuators, NSN 7R-6615-011585748-VH, from Sikorsky Aircraft, the Original Equipment Manufacturer (OEM) and sole source for this part. The procurement is for spare parts necessary for the CH-53 helicopter, which are critical for maintaining operational readiness and safety. Interested vendors must submit a Source Approval Request (SAR) if they are not already approved to manufacture this material, as the government will not delay the procurement process for SAR approvals. Proposals are due by January 30, 2025, with the solicitation expected to be issued on December 30, 2024. For further inquiries, interested parties can contact Sophia L. Pugh at sophia.l.pugh.civ@us.navy.mil.
    16--SERVOVALVE,HYDRAULI
    Active
    Dept Of Defense
    The Department of Defense, through the NAVSUP Weapon Systems Support office, is seeking to procure four units of the Servovalve, Hydraulic, identified by NSN 7R-1650-011293814-LU and part numbers A38013-1 or 65664-04920-101. This procurement is limited to the Original Equipment Manufacturers (OEM), specifically MOOG INC and SIKORSKY AIRCRAFT CORP, as the government does not possess the necessary data to source these items from other suppliers. The anticipated award date for this competitive procurement is May 2025, and interested parties must submit their capability statements to the primary contact, Elise M. Anzini, via email at elise.anzini@navy.mil within 15 days of this notice.
    Repair of NSN: 7R1680014833206
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking a sole source contractor, Triman Industries Inc., for the repair of a mechanical actuator identified by NSN 7R1680014833206. The procurement involves acquiring one actuator, and due to the lack of sufficient data to contract with other sources, this requirement is designated as a sole source. The actuator is critical for aircraft operations, and interested parties must submit their capabilities and qualifications to the primary contact, Helen I. Carmelo, via email by the specified deadline, with the anticipated award date set for March 2025. This procurement is not a Total Small Business Set-Aside, and electronic submission procedures will be utilized for the solicitation.
    16--ACTUATOR,ELECTRO-ME
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking proposals for the procurement of two electro-mechanical actuators (NSN 7R-1680-013145838-VH) under a presolicitation notice. This limited source requirement necessitates that all offers include the necessary documentation for Government Source Approval, as the Government does not possess sufficient data to contract with sources other than the current supplier. The evaluation of proposals will be based on the lowest price technically acceptable (LPTA) criteria, emphasizing the importance of compliance with the NAVSUP WSS Source Approval Brochure. Interested parties should direct inquiries to Samantha M. Freedman at samantha.m.freedman.civ@us.navy.mil, as offers lacking the required data will not be considered for award.
    30--ACTUATOR
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support MECH, is seeking to procure three units of an actuator, identified by NSN 7H-3040-016466813-X5, under a presolicitation notice. The procurement is set aside for small businesses, as indicated by the Total Small Business Set-Aside (FAR 19.5), and the contract will be negotiated with only one source due to the government's inability to reverse engineer the part or obtain the necessary data from other sources. Interested parties have 45 days to express their interest and capability to meet the requirement, with proposals being considered for a competitive procurement process, although the government retains discretion over whether to proceed competitively. For further inquiries, interested vendors can contact Duana Cloyd at (717) 605-5722 or via email at DUANA.CLOYD@NAVY.MIL.
    Acuator, Mechanical
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency at DLA Aviation in Oklahoma City, is seeking proposals for the acquisition of mechanical actuators, specifically identified by NSN 3040-01-478-8903NZ and part number 4086388. The procurement requires a total of seven units, with a minimum order of two and a maximum of eleven, emphasizing the critical safety nature of these items and the necessity for compliance with safety and quality standards. This procurement is vital for ensuring the availability of necessary mechanical actuators for federal operations, with an estimated RFP issue date of December 20, 2024, and a projected close date of January 23, 2024. Interested parties can contact David Todd Isaac at david.isaac.4@us.af.mil or by phone at 405-855-3000 for further details.
    16--DAMPER,SHIMMY
    Active
    Dept Of Defense
    The Department of Defense, through the NAVSUP Weapon Systems Support office, is seeking to procure a shimmy damper (NSN 7R-1620-016676482-H5, P/N 200-3512-003) specifically for the CH53E helicopter. The procurement involves acquiring one unit with delivery terms set to FOB Origin, and it is noted that there are no available drawings or data for this item, indicating that the source is the Original Equipment Manufacturer. This component is critical for the aircraft's landing gear system, and the government intends to negotiate with only one responsible source due to the Source Approval Statement that applies to this NSN. Interested parties should note that the anticipated award date is March 10, 2025, and they may submit their capabilities and qualifications to Liam F. Cunningham at LIAM.F.CUNNINGHAM2.CIV@US.NAVY.MIL. This procurement is not set aside for small businesses, and electronic submission procedures will be utilized.
    16--TRIM SERVO ASSY,AIR
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the procurement of three Trim Servo Assemblies for aircraft, identified by NSN 7RH 1680 014967283 and P/N CU09609253. This procurement is classified as a limited source requirement, with the expectation that only one acceptable offer will be received, although LPTA (Lowest Price Technically Acceptable) procedures will be utilized if multiple qualified sources submit proposals. The items are critical components for aircraft operations, necessitating Government Source Approval prior to award, and interested vendors must submit their proposals via email to Dana Scott at dana.l.scott14.civ@us.navy.mil by the specified deadline. For further inquiries, potential bidders can contact Dana Scott at 215-697-0273 or via the provided email address.
    16--MOTOR-PUMP,HYDRAULI
    Active
    Dept Of Defense
    The Department of Defense, through the NAVSUP Weapon Systems Support office, is seeking proposals for the procurement of four hydraulic motor-pumps, identified by NSN 7R-1650-012246682-VH and part number 70550-02046-106. This procurement is critical for maintaining aircraft hydraulic systems, which are essential for the operational readiness of naval aviation. The government intends to solicit and negotiate with only one responsible source due to the lack of available drawings and data, and interested parties must submit their capability statements by email to Julianna Macrillo at julianna.m.macrillo.civ@us.navy.mil within 45 days of this notice, with an anticipated award date set for August 2024.