This document outlines the process for accessing and viewing package information contained within a ZIP file, likely related to government RFPs, federal grants, or state and local RFPs. The file, extracted from Windchill, can be browsed using a web-based offline viewer via an 'index.html' file or by directly accessing content files in the 'Contents' folder for system import. The guide provides step-by-step instructions for extracting the ZIP file, navigating its contents, and opening the package details page in a web browser, with additional help available within the viewer.
The document is a distribution statement indicating that the product baseline, identified by ERR# TAC-V6398, is approved for public release with unlimited distribution. It was initially released on September 8, 2020, and signed by J. Ruehs, Mark Papsun, and Jeffrey Ruehs. This information suggests the public availability of a government product's foundational version.
The document details an Army Package, TPP-EH5L0147EH, which outlines the manufacturing and acceptance inspection requirements for material in accordance with specified drawings, specifications, and technical data. It emphasizes that all listed and referenced specifications and standards are crucial for bidding and manufacturing, with unlisted but referenced standards defaulting to the latest DOD Index. The package includes a comprehensive list of parts and assemblies, such as the AXLE DRESSED ASSEMBLY M915A5, FRONT, 20K LB, along with various associated components like bushings, hubs, washers, bolts, nuts, and brake assemblies. It also references key engineering and military standards like ASME Y14.100, ASME Y14.5, MIL-A-907, MIL-STD-130, and SAE J2360. Recipients are instructed to extract the zip package and open the index.html file for full access to the contents. This package is an
The document outlines the manufacturing and acceptance inspection requirements for an Army Package identified as TPP-EH5L0147EH, which pertains to an AXLE DRESSED ASSEMBLY M915A5, FRONT, 20K LB. The process must adhere to all drawings, specifications, and technical data within the Technical Data Package (TDP). The TDP's specifications and standards section is critical for bidding and manufacturing, and any unlisted specifications referenced elsewhere are still applicable at their latest DOD Index of Specifications and Standards revision. The package includes numerous components such as bushings, hubs, washers, bolts, nuts, and various assemblies like brake systems and a front axle assembly. It also lists several internal specifications, including ASME Y14.100 for engineering drawing practices, ASME Y14.5 for dimensioning and tolerancing, MIL-A-907 and MIL-PRF-907 for anti-seize thread compounds, MIL-STD-130 for identification marking, and SAE J2360 for automotive gear lubricants. Recipients are instructed to extract the Zip Package and open the index.html file for full access.
This document outlines the manufacturing and acceptance inspection requirements for the AXLE DRESSED ASSEMBLY M915A5, FRONT, 20K LB, identified by number 12512472 and Organization ID 19207. It emphasizes adherence to all drawings, specifications, and technical data listed in the Technical Data Package (TDP). The specifications and standards section is crucial for bidding and manufacturing, with unlisted but referenced specifications defaulting to the latest DOD Index of Specifications and Standards. The document details a comprehensive product structure listing 30 components, including various bolts, nuts, washers, and specific axle and brake assemblies. It also lists six key specifications, such as ASME Y14.100 for engineering drawing practices and MIL-STD-130 for identification marking, along with four replacement specifications. This file ensures that all aspects of manufacturing and inspection meet stringent federal government standards for this critical defense component.
This document outlines how to view the contents of a downloaded ZIP package file offline, depending on the options selected during its creation. Users are instructed to open the ZIP file and then proceed based on its contents. If the ZIP file contains "index.html," further information can be found under "Viewing Package Content with the Offline Viewer." If "manifest.txt" is present, refer to "Viewing Package Content with the Static Manifest." A note clarifies that the manifest file's name or extension might vary based on the sender's Windchill configuration. If neither file is present, content should be viewed via the "Content" directory. Additionally, if the package exceeds the specified size for the delivery medium, multiple ZIP files will be created. This guidance is relevant for government RFPs, federal grants, and state/local RFPs where offline access to package contents might be required for review or compliance.
The document appears to be a highly fragmented and repetitive listing of file types and content components, predominantly referencing
The document appears to be a list of various types of "packages" or files, likely related to a digital content management system or software deployment within a government context. The repeated mention of "Zipパッケージ" along with "manifest.txtパッケージ", "Windchillパッケージ", "Contentパッケージ", "ASCIIパッケージ", "WinRARパッケージ", and "7-Zipパッケージ" suggests a focus on file archiving, data compression, and potentially content management. The numbered "パッケージ" (1, 2, 3) could indicate sequential steps or components. Given the context of government RFPs and grants, this document likely outlines file formats, archiving methods, or content delivery requirements for submissions or internal data handling.
The document details an Army Package, TPP-EH5L0147EH, which outlines the manufacturing and acceptance inspection requirements for material in accordance with all drawings, specifications, and technical data listed in its Technical Data Package (TDP). The TDP's Specifications and Standards section is crucial for bidding and manufacturing, emphasizing that any unlisted but referenced specifications are still applicable at their latest DOD Index issue. The package includes a comprehensive list of components for an AXLE DRESSED ASSEMBLY M915A5, FRONT, 20K LB, with associated part numbers, names, CAGE codes, and versions. This document is essential for ensuring compliance and quality control in the procurement and production of critical Army components.
This document, identified as "Army Package - TPP-EH5L0147EH," outlines the manufacturing and inspection requirements for materials in accordance with specified drawings, specifications, and technical data. It emphasizes that all listed specifications and standards are crucial for bidding and manufacturing, and the absence of any referenced specification does not relieve requirements. The latest issue of the DOD Index of Specifications and Standards dictates amendment levels for unlisted specifications. Interim changes to specifications are included, with all previous issues applying unless otherwise stated. The package details an "AXLE DRESSED ASSEMBLY M915A5, FRONT, 20K LB," with instructions for recipients to extract and open an index.html file. This file serves as a comprehensive guide for contractors involved in the production of the specified military hardware.
This document outlines the technical data package (TDP) for the manufacture and acceptance inspection of the TPP-EH5L0147EH Army Package. It specifies that all manufacturing and inspection must conform to the drawings, specifications, and technical data listed in the TDP. The specifications and standards section is crucial for bidding and manufacturing, and the absence of a specification from this list does not relieve bidders from its requirements if it's referenced elsewhere. The latest issue of the DOD Index of Specifications and Standards dictates the amendment or revision level for unlisted specifications. Superseded specifications are listed with their replacements, and only the latest interim changes are included, with previous issues applying if not cumulative. The package includes details like the owner (secured), creation date (Apr 11, 2025), and instructions to extract and open the index.html file. It also lists key specifications such as ASME Y14.100, ASME Y14.5, MIL-PRF-907, and SAE J2360.
The document outlines the technical data package (TDP) for the manufacture and acceptance inspection of materials related to an "Army Package" identified as TPP-EH5L0147EH, specifically for an AXLE DRESSED ASSEMBLY M915A5, FRONT, 20K LB. It emphasizes adherence to all drawings, specifications, and technical data within the TDP for bidding and manufacturing. The TDP's specifications and standards section is crucial, and the absence of a specification from this list does not relieve requirements if it's referenced elsewhere. Unlisted specifications and standards are to follow the latest DOD Index. The document also lists specific standards like ASME Y14.100, MIL-A-907, MIL-PRF-907, MIL-STD-130, and SAE J2360, which are essential for the project.
This government file, identified as Special Packaging Instruction AK15812108, details the specific preservation, packaging, and marking requirements for a Front Axle (Part No. 12512472, NSN 2520-01-581-2108). The document outlines military preservation method 20 per MIL-STD-2073-1D, including cleaning, drying, and application of MIL-G-10924 and MIL-PRF-16173 Grade 4 preservatives. It specifies the use of NAS 847 caps/plugs, MIL-PRF-121 Type II barrier material, and ASTM-D6199 blocking and bracing. The packaging requires a MIL-C-104 Type II, Class 2, Style A container, which also serves as the shipping container. Marking instructions follow MIL-STD-129, with additional requirements for
This document outlines special packaging instructions (SPI) for a front axle (Part No. 12512472, NSN 2520-01-581-2108), detailing preservation, packing, and marking requirements. The process involves cleaning, drying, and applying preservatives (MIL-G-10924, MIL-PRF-16173 Grade 4), sealing openings with caps/plugs (NAS 847), and wrapping critical areas with a barrier (MIL-PRF-121 Type II). The axle is packed in a MIL-C-104 Type II, Class 2, Style A container, with specific blocking and bracing using lumber and plywood components secured by bolts and a hardware set. The container is also the shipping container and must be marked with
This government solicitation, SPRDL1-25-R-0206, issued by DLA Weapons Support (Warren), is a Request for Proposal (RFP) for a five-year Firm Fixed Price contract for Axle Assembly, Automotive, Drivetrain (NSN: 2520-01-581-2108, Mfr Part Number: 12512472). The solicitation emphasizes that only one award will be made, requiring offerors to bid on the total quantity of all items. Key aspects include electronic submission of proposals via email to the Contract Specialist, mandatory registration on SAM.gov, and a strict adherence to the closing date/time. Access to the Technical Data Package (TDP) is through SAM.gov, requiring a current DD 2345 form for export-controlled data. The contract specifies origin inspection and acceptance, military-level packaging (MIL-STD-2073-1 and MIL-STD-129), and mandates compliance with ISO 9001:2015 or equivalent quality standards. Contractors must retain supply chain traceability documentation for ten years and are prohibited from using Class I Ozone Depleting Substances. Unique Item Identification (UII) is required for items with a unit acquisition cost of $5,000 or more.
The document outlines the manufacturing and acceptance inspection requirements for MIL-PRF-907, a high-temperature antiseize thread compound. It emphasizes adherence to all technical data, drawings, and specifications listed in the Technical Data Package (TDP). The TDP's specifications and standards section is critical for bidding and manufacturing, and the absence of any referenced specification does not relieve bidders from compliance. Unlisted specifications and standards must conform to the latest DOD Index, while superseded documents are identified with their replacements. Interim changes, such as amendments or notices, are included, with all previous non-cumulative issues also applying unless stated otherwise. The document details the product's name, number, state, version, and context.
This document outlines the technical data package (TDP) for the manufacture and acceptance inspection of materials, specifically referencing ASME Y14.5 for "DIMENSIONING AND TOLERANCING." It mandates that all processes must adhere to the drawings, specifications, and technical data listed in the TDP. The document clarifies that the specifications and standards section is exhaustive for bidding and manufacturing, and the absence of a referenced specification does not relieve adherence to its requirements. Such unlisted specifications will default to the latest issue of the DOD Index of Specifications and Standards. It also addresses superseded specifications and interim changes, stating that only the latest issues are listed, with all previous interim changes applying if not cumulative. The document details the specification's name, number, state, version, and context within a standard specification library, also noting its relationship to an AXLE DRESSED ASSEMBLY.
The document details the SAE J2360 specification for "AUTOMOTIVE GEAR LUBRICANTS FOR COMMERCIAL AND MILITARY USE." This specification, identified as 81343, version -.4, is a critical component of the Technical Data Package (TDP) for bidding and manufacturing. It mandates that the manufacture and acceptance inspection of these lubricants comply with all drawings, specifications, and technical data listed in the TDP. The document clarifies that the absence of any referenced specification or standard from the TDP list does not relieve requirements, with their amendment or revision levels determined by the latest DOD Index of Specifications and Standards. It also addresses superseded specifications and interim changes, ensuring that the most current and relevant standards are applied. The context of this specification is the STANDARD SPECIFICATION LIBRARY, and it is related to the "AXLE DRESSED ASSEMBLY M915A5, FRONT, 20K LB" (Number 12512472, Version -.4).
This government file details the technical data package (TDP) for the "AXLE DRESSED ASSEMBLY M915A5, FRONT, 20K LB," part number 12512472_DP. It specifies that the manufacture and acceptance inspection of this material must comply with all drawings, specifications, and technical data listed within the TDP. The document clarifies that the TDP's specifications and standards section is crucial for bidding and manufacturing. It also outlines policies regarding unlisted specifications, the latest issues of DOD indexes, superseded specifications, and interim changes, emphasizing that all applicable requirements must be met. The file provides essential identification details for the axle assembly, including its name, number, state (RELEASED), version, and context (HTV ACMS), along with references to its primary content and related objects.
The document, MIL-STD-130, titled "IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY," outlines the essential specifications and standards for bidding and manufacturing U.S. military property. It emphasizes that all material production and acceptance inspections must comply with the technical data package (TDP), including drawings and other technical data. The document clarifies that the absence of a specification or standard from the TDP list does not relieve requirements if it is referenced elsewhere or on product, packaging, or inspection drawings. In such cases, the amendment or revision level will be determined by the latest issue of the DOD Index of Specifications and Standards in effect on the TDP date. It also addresses superseded specifications and interim changes, stating that only the latest interim issue is listed, and previous non-cumulative issues may also apply. The MIL-STD-130 is a released standard specification, version N.5, with a context of the Standard Specification Library.
The document "ENGINEERING DRAWING PRACTICES" (ASME Y14.100, 05047, M.6) outlines the technical data package (TDP) requirements for manufacturing and acceptance inspection of materials. It emphasizes that all drawings, specifications, and technical data within the TDP must be followed. The document clarifies that the listed specifications and standards are essential for bidding and manufacturing, and any unlisted but referenced specifications are still binding. The amendment or revision level for unlisted specifications will be based on the latest DOD Index of Specifications and Standards. Superseded specifications are listed with their replacements, and only the latest issue of interim changes (amendments, notices) are included, with previous non-cumulative issues also applying unless otherwise stated. This document is a critical reference for ensuring compliance and consistency in engineering and manufacturing processes within government contracting contexts.
The document MIL-A-907, titled "ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE," details the manufacturing and acceptance inspection requirements for this material. It emphasizes adherence to all technical data, drawings, and specifications listed in the Technical Data Package (TDP). The document clarifies that the specifications and standards section of the TDP is comprehensive for bidding and manufacturing. It also states that any unlisted but referenced specifications or standards must conform to the latest DOD Index of Specifications and Standards. The document further addresses superseded specifications and interim changes, noting that only the latest issues are listed in the TDP, with previous non-cumulative issues also applying unless otherwise stated. This document is an internal Army specification, released as version E.3, and is related to the AXLE DRESSED ASSEMBLY, M915A5, FRONT, 20K LB.
The document details the manufacturing and inspection requirements for Army Part 39021, a LOCK NUT with CAGE Code 0AMX8. It emphasizes that all processes must comply with the Technical Data Package (TDP), including all listed drawings, specifications, and technical data. The specifications and standards section of the TDP is crucial for bidding and manufacturing. It clarifies that unlisted specifications referred to within listed documents or on drawings are still applicable, with their amendment or revision levels determined by the latest DOD Index of Specifications and Standards. Superseded specifications are noted with their replacements, and only the latest interim changes are listed in the TDP, with previous non-cumulative issues also applying unless stated otherwise. The part is designated as a component, serviceable, and intended for procurement by the Army.
This government file, identified as Army Part 19X1116, details the technical data package (TDP) for the manufacture and acceptance inspection of a CLEVIS PIN. The document specifies that all manufacturing and inspection processes must conform to the drawings, specifications, and technical data listed within the TDP. It clarifies that the specifications and standards section is comprehensive for bidding and manufacturing, and any unlisted specifications referred to elsewhere are still applicable, with their amendment levels determined by the latest DOD Index of Specifications and Standards. The document also addresses superseded specifications and interim changes, ensuring that the latest issues apply. Key details about the part include its name (CLEVIS PIN), number (19X1116), CAGE Code (78500), and its status as a RELEASED component with a -.2 (EBOM) version. The context is HTV ACMS, and it is designated as a
This document, an Army Technical Data Package (TDP) numbered 48-02217-025 for a nylon conduit, outlines the essential requirements for manufacturing and acceptance inspection. It emphasizes adherence to all listed drawings, specifications, and technical data within the TDP, which serves as a comprehensive compilation for bidding and manufacturing. The document clarifies that any unlisted specifications or standards referenced elsewhere still apply, with their amendment levels determined by the latest DOD Index of Specifications and Standards. It also addresses superseded specifications and interim changes, ensuring that only the latest applicable versions are listed. Key details provided include the item's name (CONDUIT, NYLON), CAGE Code (64678), and version (-.2 (EBOM)). The TDP's purpose is to standardize manufacturing and inspection processes, ensuring compliance and quality for federal procurements.
This document outlines the manufacturing and inspection requirements for the Army part 19X-127, a PIN, CLEVIS, with CAGE Code 78500. It emphasizes that all processes must comply with the drawings, specifications, and technical data listed in the Technical Data Package (TDP). The TDP's specifications and standards section is critical for bidding and manufacturing. It clarifies that any unlisted specifications or standards referred to elsewhere still apply, with their amendment levels determined by the latest DOD Index of Specifications and Standards. The document also addresses superseded specifications and interim changes, stating that only the latest issue is listed, but previous non-cumulative issues may also apply. The part is classified as a component, is serviceable, and is designated for buy sourcing within a Product Data Life Cycle.
This document outlines the technical data package (TDP) for the Army Part HUB CAP, number 7003942, with CAGE Code 51234. The TDP specifies that the manufacture and acceptance inspection of this material must comply with all listed drawings, specifications, and technical data. It emphasizes that the specifications and standards section is crucial for bidding and manufacturing, and the absence of a specification does not relieve bidders from its requirements if it's referenced elsewhere. Unlisted specifications and standards must adhere to the latest issue of the DOD Index of Specifications and Standards. The document also clarifies the application of interim changes and superseded specifications. Key details include the part's status as 'RELEASED,' version '-.2 (EBOM),' classified as a 'Component' under 'HTV ACMS' context, and sourced as 'Buy.' This document serves as a comprehensive guide for procurement and production, ensuring adherence to Army standards.
The Army Part 23-00600-025 document details the technical requirements for manufacturing and inspecting a "WASHER, SST." This full Technical Data Package (TDP) specifies that all production and acceptance inspections must comply with listed drawings, specifications, and technical data. It emphasizes that any unlisted specifications or standards referred to elsewhere in the TDP or on drawings are still mandatory, with their amendment levels determined by the latest DOD Index of Specifications and Standards. The document also clarifies the treatment of superseded specifications and interim changes, ensuring that only the most current and relevant technical information is applied. This comprehensive document serves as a critical guide for bidders and manufacturers, ensuring adherence to the Army's precise technical and quality standards for the component.
This document details the technical data package (TDP) for the manufacture and acceptance inspection of a "BRAKE ASSY, FRONT LEFT" (part number S10-12610-022) for the Army. The TDP includes all necessary drawings, specifications, and technical data. It emphasizes that all specifications and standards listed are essential for bidding and manufacturing, and the absence of a specification from the list does not relieve requirements if it is referenced elsewhere. The amendment or revision level for unlisted specifications will follow the latest DOD Index of Specifications and Standards. Superseded specifications are noted with their replacements, and only the latest issues of interim changes (amendments, notices) are listed. The document also provides specific details about the part, including its CAGE Code (64678), "RELEASED" state, "Component" assembly mode, and "Buy" source.
This document outlines the technical data package (TDP) for the manufacture and acceptance inspection of an Army part identified as CHAMBER, number 127240011, with CAGE Code 4M5H2. The manufacturing and inspection processes must adhere to all drawings, specifications, and technical data within this TDP. The TDP's Specifications and Standards section is crucial for bidding and manufacturing, and the absence of any referenced specification or standard from this list does not relieve bidders from compliance. Unlisted specifications and standards must conform to the latest issue of the DOD Index of Specifications and Standards in effect on the TDP's date. The document also clarifies how superseded specifications and interim changes are handled, emphasizing that only the latest interim issue is listed, and all previous non-cumulative issues apply unless stated otherwise. This document is essential for any vendor preparing a bid for this Army part.
This document outlines the technical data package (TDP) for the Army Part 330-3009, GASKET- HUB CAP. It specifies that the manufacture and acceptance inspection of this material must comply with all drawings, specifications, and technical data listed in the TDP. The specifications and standards section within the TDP is crucial for bidding and manufacturing. The document clarifies that any unlisted specifications or standards referred to elsewhere are still applicable, with their amendment or revision levels determined by the latest DOD Index of Specifications and Standards. Superseded specifications are listed with their replacements, and only the latest interim changes to specifications are included, with previous issues applying if not cumulative. The part is a component, currently released, and designated for purchase.
This document outlines the technical data package (TDP) for the Army Part 441-032-994-0, a SENSOR, ABS. It details the requirements for manufacturing and acceptance inspection, emphasizing adherence to all drawings, specifications, and technical data listed within the TDP. The specifications and standards section is crucial for bidding and manufacturing, and any unlisted specifications referred to elsewhere in the TDP are still applicable at the latest revision level as per the DOD Index of Specifications and Standards. The document also addresses superseded specifications and interim changes. Key information includes the part name (SENSOR, ABS), number, CAGE Code (1FYY2), and its status as a RELEASED component in the HTV ACMS context.
This document, identified as Army Part S10-12610-023, pertains to the manufacture and acceptance inspection of a "BRAKE ASSY, FRONT RIGHT." It specifies that all processes must comply with the drawings, specifications, and technical data outlined in the Technical Data Package (TDP). The TDP’s specifications and standards section is critical for bidding and manufacturing, and the absence of any referenced specification does not relieve compliance. Unlisted specifications and standards must conform to the latest DOD Index of Specifications and Standards. Superseded specifications are noted with their replacements, and only the latest interim changes are listed, with previous issues applying if not cumulative. The component is designated as "Source: Buy" and "Serviceable: Yes," indicating it is an acquireable and usable part within the HTV ACMS context. This document serves as a foundational guide for procurement and production, emphasizing strict adherence to military standards and specifications for quality assurance.
This government file, Army Part - 180077, details the technical data package (TDP) for the manufacture and acceptance inspection of a HEX BOLT. It specifies that all material must conform to the drawings, specifications, and technical data listed in the TDP. The document clarifies that the specifications and standards section is essential for bidding and manufacturing, and any unlisted specifications referred to within listed documents or drawings are still applicable, with their amendment or revision level determined by the latest DOD Index of Specifications and Standards. It also addresses superseded specifications and interim changes, stating that only the latest issue is listed, but previous non-cumulative issues may also apply. Key details for the part include its name (BOLT, HEX), number (180077), CAGE Code (64678), and its status as 'RELEASED' and a 'Component' with a 'Buy' source.
This document outlines the technical data package (TDP) for the manufacture and acceptance inspection of an Army "FRONT AXLE ASSEMBLY," part number MFS20133ANN30. The TDP emphasizes adherence to all listed drawings, specifications, and technical data. It clarifies that specifications and standards essential for bidding and manufacturing are compiled within the TDP, and any unlisted specifications referred to elsewhere are still applicable at the latest DOD Index issue. Superseded specifications are also noted with their replacements. Interim changes to specifications are included, with all previous non-cumulative issues remaining valid unless otherwise stated. The part is designated as a component, released, and serviceable, with a CAGE Code of 78500.
This government file details the technical data package (TDP) for Army Part - 10014461, HUB - FL, 66767, -.2 (EBOM), focusing on the manufacturing and acceptance inspection of the material. It mandates adherence to all drawings, specifications, and technical data listed within the TDP. The document clarifies that the specifications and standards section is comprehensive for bidding and manufacturing, and any unlisted specifications referred to elsewhere are still applicable, with their revision levels determined by the latest DOD Index of Specifications and Standards. It also addresses superseded specifications and interim changes, stating that only the latest issue is listed, but previous issues may still apply if not cumulative. The part is identified as a component for the HTV ACMS context, is serviceable, and is sourced via 'Buy' for its life cycle.
This government file, Army Part SA11902, details the manufacturing and inspection requirements for a SLACK ADJUSTER, identified by CAGE Code 6N071. The document specifies that all manufacturing and acceptance inspections must adhere to drawings, specifications, and technical data listed in the Technical Data Package (TDP). It emphasizes that the TDP's specifications and standards section is crucial for bidding and manufacturing. The absence of a specification or standard from the TDP does not relieve requirements if it is referenced elsewhere. Unlisted specifications and standards must follow the latest issue of the DOD Index of Specifications and Standards. Superseded specifications are listed with their replacements, and only the latest interim changes (amendments, notices) are included in the TDP. If interim changes are not cumulative, all previous issues also apply unless otherwise stated. The item is a component with the status
This document outlines the manufacturing and acceptance inspection requirements for an Army part identified as PIN, HITCH, SMALL (2257-D-1174, CAGE Code: 78500). The manufacturing and inspection processes must strictly adhere to all drawings, specifications, and technical data detailed in the Technical Data Package (TDP). The TDP's specifications and standards section is critical for bidding and manufacturing. It clarifies that any unlisted specifications or standards referenced within the listed documents or on product drawings still apply, with their amendment levels determined by the latest DOD Index of Specifications and Standards. The document also addresses superseded specifications and interim changes, stating that only the latest issues are listed in the TDP, and previous issues apply if interim changes are not cumulative. This file serves as a comprehensive guide for ensuring the quality and compliance of the specified Army part.
This document outlines the technical data package (TDP) for the manufacture and inspection of an Army part, specifically a CHAMBER with part number 127240012 and CAGE Code 4M5H2. The TDP mandates that all manufacturing and acceptance inspections must adhere to the drawings, specifications, and other technical data listed. It emphasizes that the specifications and standards section is comprehensive for bidding and manufacturing purposes. The document clarifies that any unlisted specifications or standards referred to elsewhere are still applicable, with their revision levels determined by the latest DOD Index of Specifications and Standards. It also addresses superseded specifications and interim changes, ensuring that only the latest issues are listed, while acknowledging that previous non-cumulative interim changes also apply unless stated otherwise.
This document, an Army Part Technical Data Package (TDP) for BUSHING, ABS, Number 10-12332-001, CAGE Code 64678, outlines the manufacturing and acceptance inspection requirements. It emphasizes that all processes must strictly adhere to the drawings, specifications, and technical data listed within the TDP. The document clarifies that the specifications and standards section is comprehensive for bidding and manufacturing. It also states that the absence of a specification or standard from the listed compilation does not relieve compliance, and the latest issue of the DOD Index of Specifications and Standards dictates amendment levels for unlisted but referenced specifications. The TDP also addresses superseded specifications and interim changes, noting that only the latest issue is listed, and previous non-cumulative issues also apply unless stated otherwise. The part is identified as a component in the HTV ACMS context, serviceable, and part of the Product Data Life Cycle phase of
This document, identified as Army Part - 3687X, DRUM, 6N071, -.2 (EBOM), outlines the manufacturing and acceptance inspection requirements for a "DRUM" component. It specifies that all processes must comply with drawings, specifications, and technical data listed in the Technical Data Package (TDP). The TDP’s specifications and standards section is critical for bidding and manufacturing, emphasizing that any unlisted but referenced specifications or standards still apply, with their revision levels determined by the latest DOD Index of Specifications and Standards. Superseded specifications are listed with their replacements, and only the latest interim changes are included, with previous non-cumulative issues remaining applicable. The document also provides key identifying information for the part, such as its CAGE Code, state as "RELEASED," and assembly mode as "Component," indicating its role in a larger system like HTV ACMS.
The document details the manufacturing and inspection requirements for an Army part, specifically a HEX NUT (23-09336-007). It emphasizes that all processes must comply with drawings, specifications, and technical data listed in the Technical Data Package (TDP). The TDP's specifications and standards section is crucial for bidding and manufacturing, and the absence of a listed specification does not waive its requirements if it's referenced elsewhere. Unlisted specifications and standards must follow the latest DOD Index of Specifications and Standards. The document also clarifies how superseded specifications and interim changes (amendments, notices) are handled, stating that only the latest issue is listed, and previous issues apply if not cumulative. This file outlines the stringent regulatory framework for defense manufacturing, ensuring quality and adherence to evolving technical standards.
This document outlines the technical data package (TDP) for the manufacture and acceptance inspection of a WASHER, SPRG LOCK, part number 120214, with CAGE Code 64678. The TDP mandates that all manufacturing and inspection processes comply with listed drawings, specifications, and technical data. It emphasizes that the absence of a specification or standard from the TDP list does not relieve requirements if it's referenced elsewhere, with the latest DOD Index of Specifications and Standards governing such unlisted items. The document also addresses superseded specifications and interim changes, stating that only the latest issue is listed, but previous non-cumulative issues may still apply. This file serves as a comprehensive guide for bidders and manufacturers, ensuring adherence to rigorous Army standards for this component.
This document, an Army Part file (23-13179-212) for a HEX NUT, outlines the technical data package (TDP) for its manufacture and acceptance inspection. It emphasizes that all drawings, specifications, and technical data within the TDP are essential for bidding and manufacturing. The specifications and standards section compiles all necessary documents, and any unlisted specifications referred to elsewhere are to be interpreted at their latest DoD Index of Specifications and Standards revision. Superseded specifications are listed with their replacements, and only the latest interim changes are included, with previous non-cumulative issues also applying unless otherwise stated. Key details include the part name, number, CAGE code, and its status as a
This government file details the manufacturing and acceptance inspection requirements for an Army part, specifically a "STUD - WELD" with part number 682-429-00-70. The document, identified as RELEASED version -.2 (EBOM), emphasizes that all processes must comply with the drawings, specifications, and technical data listed in the Technical Data Package (TDP). It clarifies that the TDP's specifications and standards section is exhaustive for bidding and manufacturing. Any unlisted specifications or standards referenced elsewhere are still applicable, with their amendment or revision levels determined by the latest DOD Index of Specifications and Standards. Superseded specifications are listed with their replacements, and only the latest issues of interim changes (amendments, notices) are included, with previous non-cumulative issues also applying unless stated otherwise. The part is designated as a Component, is serviceable, and is for Buy sourcing.
This Army document, S630-G17, details the technical data package (TDP) for the manufacture and acceptance inspection of a "CLAMP - SUPPORT" component. It specifies that all production and inspection must conform to the drawings, specifications, and technical data listed within the TDP. The document clarifies that the specifications and standards section is crucial for bidding and manufacturing. It also addresses the treatment of unlisted specifications and standards, stating that their absence does not relieve requirements and that the latest DOD Index of Specifications and Standards applies. Superseded specifications are listed with their replacements, and only the latest issues of interim changes are included, with all previous non-cumulative issues also applying unless otherwise stated. The component is identified as a "CLAMP - SUPPORT," part of the HTV ACMS context, and is designated as a component for manufacturing.
The Army Part 2257-C-1173, a large hitch pin, is subject to strict manufacturing and acceptance inspection standards. All production must align with the Technical Data Package (TDP), which includes drawings, specifications, and technical data. The TDP's Specifications and Standards section is crucial for bidding and manufacturing, and any unlisted specifications referenced within the listed documents or on drawings are still applicable, with their amendment or revision levels determined by the latest DOD Index of Specifications and Standards. Superseded specifications are noted, and only the latest interim changes are listed, with previous non-cumulative issues also applying unless stated otherwise. This document outlines the technical requirements for a specific Army component, emphasizing adherence to detailed technical documentation for procurement and production.
This government file details the technical data package (TDP) for the Army Part 23-09114-004, a HARDENED WASHER. It specifies that the manufacture and acceptance inspection of this material must comply with all drawings, specifications, and technical data listed in the TDP. The document clarifies that the specifications and standards section is exhaustive for bidding and manufacturing. It further states that any unlisted specifications referred to elsewhere in the TDP or on drawings must adhere to the latest issue of the DOD Index of Specifications and Standards. The TDP also addresses superseded specifications and interim changes, emphasizing that only the latest issue is listed, with previous non-cumulative issues also applying unless otherwise stated. Key details include the part name, number, CAGE code, and its status as a RELEASED component in the HTV ACMS context.
The document outlines the technical data package (TDP) for the manufacture and acceptance inspection of an Army part, specifically a "NUT, WHEEL" with part number 333 and CAGE Code 0CE41. It emphasizes that all manufacturing and inspection must comply with drawings, specifications, and technical data listed in the TDP. The specifications and standards section is critical for bidding and manufacturing, and any unlisted specifications referred to elsewhere are still applicable at the latest issue specified in the DOD Index of Specifications and Standards. The document also clarifies how superseded specifications and interim changes are handled, ensuring only the latest applicable versions are considered. This detailed TDP serves as a comprehensive guide for procurement and production, highlighting the stringent requirements for this specific component.
This document outlines the manufacturing and acceptance inspection requirements for an Army part, specifically a "CLIP - SPRING, SENSOR, ABS" with part number 899-760-510-4 and CAGE Code 1FYY2. The process must adhere to all drawings, specifications, and technical data detailed in the Technical Data Package (TDP). The TDP's specifications and standards section is critical for bidding and manufacturing. It clarifies that any unlisted specifications or standards referred to elsewhere in the TDP or on drawings are still applicable, with their amendment or revision level determined by the latest DOD Index of Specifications and Standards. Superseded specifications and interim changes (amendments, notices) are also addressed, ensuring the most current and relevant technical data is used. The part is designated as a component in the HTV ACMS context, with a
This document outlines the technical data package (TDP) for the manufacture and acceptance inspection of an Army part, specifically a BOLT, HEX (Part Number: 4019-3486-2.25, CAGE Code: 64678). It emphasizes that all manufacturing and inspection must comply with the drawings, specifications, and other technical data listed in the TDP. The specifications and standards section is critical for bidding and manufacturing. It clarifies that any unlisted but referenced specifications or standards are still applicable, with their amendment or revision levels determined by the latest DOD Index of Specifications and Standards. The document also addresses superseded specifications and interim changes, stating that only the latest issues are listed, but previous non-cumulative issues may also apply. This TDP ensures adherence to comprehensive technical requirements for this specific component in government procurement.
This government file details the technical data package (TDP) for the AXLE DRESSED ASSEMBLY M915A5, FRONT, 20K LB, identified as Army Part 12512472. The document outlines the manufacturing and acceptance inspection requirements, emphasizing adherence to all specified drawings, specifications, and technical data within the TDP. It clarifies that the listed specifications and standards are crucial for bidding and manufacturing, and the absence of any referenced specification does not relieve bidders from compliance. The TDP also addresses the appropriate amendment or revision levels for unlisted specifications, referring to the latest DOD Index. Key specifications referenced include ASME Y14.100 for engineering drawing practices, ASME Y14.5 for dimensioning and tolerancing, MIL-A-907 for anti-seize thread compound, MIL-STD-130 for identification marking, and SAE J2360 for automotive gear lubricants. The file provides detailed information about the assembly, including its CAGE Code (19207), released state, version, and assembly mode, indicating it is a separable component within the HTV ACMS context. This document serves as a critical reference for potential contractors bidding on or manufacturing this specific axle assembly for the U.S. Army, ensuring strict adherence to military and industry standards.