NSN 1615-010957107, BARREL-ROTARY, CONTR.
ID: SPE4A725R0093Type: Sources Sought
Overview

Buyer

DEPT OF DEFENSEDEFENSE LOGISTICS AGENCYDLA AVIATIONRICHMOND, VA, 23237, USA

Original Source

https://sam.gov/opp/02c1f657010948fda886f6de4307e12c/view
Timeline
    Description

    The Department of Defense, through the Defense Logistics Agency (DLA) Aviation, is conducting market research via a Sources Sought notice for the procurement of the NSN 1615-010957107, a Barrel-Rotary component. The DLA is seeking to identify companies capable of manufacturing or legitimately obtaining this item, which is currently produced by Precision Gear Industries and Sikorsky Aircraft Corporation for use in the UH-60 helicopter series. Interested parties are encouraged to submit an application package through the Source Approval Request (SAR) program to be considered as an approved source, with responses due by October 25, 2024, at 3:00 PM Eastern Standard Time. For further inquiries, potential respondents can contact Ryan Loeffelholz at ryan.loeffelholz@dla.mil or by phone at 804-279-1452.

    Point(s) of Contact
    Ryan Loeffelholz
    (804) 279-1452
    ryan.loeffelholz@dla.mil
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    NSN 1615-010957107, BARREL-ROTARY, CONTR.
    Currently viewing
    Sources Sought
    Similar Opportunities
    BARREL-ROTARY,CONTR
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is soliciting proposals for the procurement of 970 units of barrel-rotary components for the H-60 helicopter, identified by NSN: 1615-010957107 and Part Number: 70301-02114-104. This procurement is classified as a Critical Safety Item and requires compliance with Enhanced Export Control and NIST SP 800-171 DOD Assessment Requirements. The solicitation is set to be issued on September 30, 2024, and interested vendors must submit their proposals in writing, with offers due to the specified fax number. For further inquiries, potential offerors can contact Cindy Hunt at (804) 971-7217 or via email at cindy.hunt@dla.mil.
    Barrel-Rotary, Contr
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking proposals for the procurement of helicopter components, specifically the Barrel-Rotary for the Black Hawk UH-60A, under a presolicitation notice. The contract will be a Total Small Business Set-Aside, with an estimated maximum order quantity of 304 units over a five-year period, emphasizing the critical safety and configuration control aspects of the item. This procurement is vital for maintaining the operational readiness of military helicopters, and interested vendors must submit their proposals by fax to the provided contact information. The solicitation is set to be issued on October 18, 2024, and inquiries can be directed to Cindy Hunt at cindy.hunt@dla.mil or by phone at (804) 971-7217.
    70 EA of NSN 1005-011911010
    Active
    Dept Of Defense
    The Defense Logistics Agency (DLA) is conducting market research to identify potential sources for the procurement of 70 units of NSN 1005-01-191-1010, specifically a rotor for a motor and shaft. Interested vendors must demonstrate their capability to manufacture the item, which includes providing all necessary labor, materials, and equipment, as well as managing logistics and supply chain issues. This procurement is crucial for maintaining the operational readiness of military equipment, and while there is no current solicitation, responses to this sources sought notice are due by October 29, 2024, at 3:00 PM Eastern Standard Time. Interested parties should submit their capability statements via email to Keli Barish at keli.barish@dla.mil.
    SPRRA1-25-R-0014 SHAFT ASSY, INTERMEDIATE TO TAIL ROTOR GEARBOX STABILAT
    Active
    Dept Of Defense
    The Defense Logistics Agency (DLA) is seeking information from potential sources for the procurement of a shouldered shaft (NSN: 3040-01-156-5372, Part Number: 7-211350027-3) required for the AH-64 Apache weapon system. This Sources Sought Synopsis aims to identify manufacturers capable of meeting the prequalification requirements, as the government cannot acquire the necessary data rights for this part, making reverse engineering impractical. The procurement is crucial for maintaining the operational readiness of the Apache system, and the DLA encourages participation from small and disadvantaged businesses. Interested parties should contact Rhondalyn Mack at rhondalyn.mack@dla.mil or Scott Wilhite at SCOTT.WILHITE@DLA.MIL for further information, noting that responses are for market research purposes only and do not constitute a commitment for future solicitation.
    SPE4A725R0100-MAINTENANCE, HELICOPTER,H1 ALL VERSONS
    Active
    Dept Of Defense
    The Defense Logistics Agency (DLA) is conducting market research to identify potential sources for the maintenance of helicopter components, specifically for NSN: 1680-016768496, which is part number 4705-10002-15. Interested parties must demonstrate their capability to provide all necessary labor, materials, and equipment for the new manufacture of these items, which includes procurement, inspection, testing, and logistics management. This opportunity is crucial for ensuring the operational readiness of military helicopters, with an estimated annual requirement of 15 units. Responses to this Sources Sought Notice are due by October 29, 2024, at 3:00 PM Eastern Standard Time, and should be submitted via email to Madeline Mackie at madeline.mackie@dla.mil.
    EXTEND ASSY, LH / NSN 1560-01-233-8318 / UH-60 BLACKHAWK HELICOPTER
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is seeking to establish an Indefinite Quantity Contract (IQC) for the EXTEND ASSEMBLY, LH, with National Stock Number (NSN) 1560-01-233-8318, specifically for the UH-60 Blackhawk Helicopter. The contract will cover a five-year base period with an Estimated Annual Quantity (EAQ) of 24 units, and production units will be delivered FOB Destination with inspection and acceptance at the origin. This component is crucial for the operational readiness of the Blackhawk Helicopter, and while it is not deemed critical, it is subject to export control regulations. Interested manufacturers must submit a Source Approval Request (SAR) to be considered, and the estimated solicitation issue date is November 6, 2024. For further inquiries, potential bidders can contact Chris Rose at CHRISTOPHER.ROSE@DLA.MIL or Jeremy Prince at Jeremy.Prince@dla.mil.
    SHAFT & ROTOR ASSEMBLY / NSN 2915-01-207-8715 / KC135 AIRCRAFT
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is issuing a presolicitation for an Indefinite Quantity Contract (IQC) for the SHAFT & ROTOR ASSEMBLY, NSN 2915-01-207-8715, specifically for the KC-135 Aircraft. The contract will cover a five-year base period with an Estimated Annual Quantity (EAQ) of 16 units, and production will be delivered FOB Destination with inspection and acceptance at the origin. This item is critical for aircraft operations, and while it is not classified as a Critical Safety Item, it requires Government First Article Testing. Interested manufacturers must submit a Source Approval Request (SAR) to be considered, as DLA Aviation does not have a complete technical data package available. Proposals are due within 45 days of the notice publication, with the estimated solicitation issue date set for November 8, 2024. For further inquiries, interested parties can contact Chris Rose at CHRISTOPHER.ROSE@DLA.MIL or Jeremy Prince at Jeremy.Prince@dla.mil.
    NSN 1650-001597749, PISTON, LINEAR ACTUA.
    Active
    Dept Of Defense
    The Defense Logistics Agency (DLA) Aviation is conducting market research through a Sources Sought Notice to identify companies capable of manufacturing or obtaining the item NSN 1650-001597749, a piston for linear actuation. This item is currently produced by Northrop Grumman Systems Corporation and Capy Machine Shop Inc., and is critical for weapon systems designated under codes EEN and E2/C2. Interested parties wishing to be considered as approved sources must submit an application package through the Source Approval Request (SAR) program and notify the buyer, Ryan Loeffelholz, at ryan.loeffelholz@dla.mil by the deadline of October 28, 2024, at 3:00 PM Eastern Standard Time. Responses to this notice are voluntary and do not constitute a commitment by the government to award a contract.
    SHAFT,SHOULDERED
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA) Land and Maritime, is seeking sources for the procurement of a shaft, shouldered, identified by National Stock Number (NSN) 1005-014733194. The opportunity is categorized as a Sources Sought notice, aimed at identifying potential manufacturers who can produce this item, which is classified under the Aircraft Manufacturing industry (NAICS code 336411) and pertains to miscellaneous power transmission equipment (PSC code 3040). Interested parties are encouraged to review the approved sources, which currently include Canadian Commercial Corp and Pratt & Whitney Canada Corp, and submit any additional sources capable of manufacturing this item by the specified response date. For companies wishing to become an approved source, they may apply through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program, providing necessary technical data to demonstrate their capability. For further inquiries, contact Danielle Jilton at danielle.jilton@dla.mil or call 614-692-4197.
    ARM ASSEMBLY, TORQUE / NSN 1620-01-126-6160 / CH53 HELICOPTER
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Aviation), is issuing a presolicitation for an Indefinite Quantity Contract (IQC) for the ARM ASSEMBLY, TORQUE, with National Stock Number (NSN) 1620-01-126-6160, specifically for the CH53 Helicopter. This contract is a 100% Small Business Set-Aside, with an estimated annual quantity of 32 units over a five-year base period, and production units will be delivered FOB Destination with inspection and acceptance at the origin. The item is critical for operations but is not classified as a Critical Safety Item, and interested contractors must submit a Source Approval Request (SAR) if they are not already an approved source, as DLA Aviation does not possess technical data on this part. Interested parties should contact Chris Rose at CHRISTOPHER.ROSE@DLA.MIL or Jeremy Prince at Jeremy.Prince@dla.mil for further information, with the estimated solicitation issue date set for October 11, 2024.