Cambridge Model: 770-AW Axle Weigher Scale, procurement, install, calibration, and certification
ID: F2C3SM4192A001Type: Special Notice
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE AIR FORCEFA5215 766 ESS PKPJBPHH, HI, 96860-4928, USA

NAICS

Other Commercial Equipment Merchant Wholesalers (423440)

PSC

SCALES AND BALANCES (6670)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/77aa24fd27b74dfc82e6031bb74179c6/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Air Force, is seeking eligible vendors to provide the Cambridge Model: 770-AW Axle Weigher Scale, including its procurement, installation, calibration, and certification at Joint Base Pearl Harbor Hickam in Hawaii. The requirement includes adding a third scale module that integrates seamlessly with two existing modules, necessitating that the new scale matches the specifications of the current system, which includes a load capacity of 30,000 lbs and specific physical dimensions. This scale is crucial for accurately weighing three-axle vehicles, thereby supporting operational efficiency at the base. Interested vendors are encouraged to respond via email to primary contact Alex Kanai at alex.kanai.1@us.af.mil or secondary contact TSgt James Meyers at james_allan_potter.meyers@us.af.mil, as this is a request for information rather than a request for quote.

    Files
    No associated files provided.
    Similar Opportunities
    Scale Calibration Services
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is soliciting proposals for Scale Calibration Services at Dover Air Force Base, Delaware. The contract, valued at $34 million, requires the selected contractor to provide preventive and remedial maintenance for a total of 46 scales, ensuring compliance with calibration standards and safety regulations. This service is critical for maintaining the accuracy of weighing equipment essential to the operations of the 436th Aerial Port Squadron. Interested small businesses must submit their quotes by September 17, 2024, with questions due by September 6, 2024; inquiries can be directed to Sydney Hocker at sydney.hocker.1@us.af.mil or Justin Bordalo at justin.bordalo@us.af.mil.
    30--WEIGHT,COUNTERBALAN
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of 1,121 units of counterbalance weights (NSN 3040015643126) under a Combined Synopsis/Solicitation notice. This procurement may lead to an Indefinite Delivery Contract (IDC) with a one-year term or until the total orders reach $250,000, with an estimated three orders per year and a guaranteed minimum quantity of 168 units. These items are critical for mechanical power transmission equipment and will be shipped to various DLA depots both within the continental United States and overseas. Interested vendors must submit their quotes electronically, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil.
    Cannister Load Cells for Engine Tests
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Air Force Sustainment Center at Tinker Air Force Base in Oklahoma, is seeking quotations for Cannister Load Cells required for engine testing. This procurement is a Firm Fixed Price (FFP) contract aimed exclusively at small businesses under NAICS Code 334519, with a specific emphasis on acquiring Wika Sensor Technology Load Cells to ensure compatibility and avoid costly modifications. The selected equipment is critical for maintaining operational efficiency in defense capabilities, as it plays a vital role in measuring engine thrust during tests. Quotes must be submitted by September 23, 2024, by noon CDT, and all offerors must be registered in the System for Award Management (SAM) by the award date to be eligible. For further inquiries, interested parties may contact Relijah Sherman at relijah.sherman@us.af.mil or Marc J. Kreienbrink at marc.kreienbrink.1@us.af.mil.
    Comblift Purchase
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking small businesses to provide two Comblifts with a capacity of 25,000 lbs, as outlined in the attached specifications document. The procurement aims to acquire forklifts suitable for confined warehouse environments, capable of lifting containers weighing between 4,000 lbs and 15,000 lbs, with a maximum lift height of 13'5" and operational dimensions tailored for efficiency in limited spaces. Interested vendors are encouraged to respond with their capabilities and delivery timelines, as this sources sought notice is intended for market research purposes only, with no contract awards resulting from this posting. For further inquiries, potential respondents can contact Michael Mascorro at michael.mascorro.1@us.af.mil.
    WRECKER, 35 TON INTEGRATED RECOVERY BOOM AND UNDERLIFT
    Active
    Dept Of Defense
    The Department of Defense, through the 11th Contracting Squadron, is soliciting bids for a 35 Ton Wrecker with an integrated recovery boom and underlift, intended for delivery to Joint Base Anacostia-Bolling in Washington, D.C. The procurement aims to enhance the operational capabilities of the Air Force by acquiring a vehicle that meets specific technical requirements, including a minimum engine performance of 500 hp and compliance with U.S. emissions standards. This opportunity is particularly significant as it supports small businesses, with a total small business set-aside, and emphasizes the importance of competitive pricing and technical specifications in the selection process. Interested vendors must submit their proposals electronically by September 18, 2024, and direct any inquiries to J. Brandon La'Pierre at jerome.lapierre.1@us.af.mil or Gregory Bishop at gregory.bishop.8@us.af.mil, noting that no awards will be made until funds are available.
    RFQ - 36 MSG/ DET 1 (Diego Garcia) – Vehicle Lifts (2-Post with 30k lbs Lift Capacity and 4-Post with 60k Lift Capacity) - Andersen AFB, Guam
    Active
    Dept Of Defense
    The Department of Defense, through the Department of the Air Force, is soliciting quotes for the procurement of vehicle lifts to be delivered to Andersen Air Force Base in Diego Garcia. The requirement includes two hydraulic two-post vehicle lifts with a capacity of 30,000 lbs and two heavy-duty four-post vehicle lifts with a capacity of 60,000 lbs, essential for conducting maintenance on mission-critical equipment. These lifts will replace outdated and damaged equipment, thereby enhancing operational readiness and supporting various tenant units on the island. Interested vendors must submit their proposals by September 20, 2024, at 11:00 A.M. Chamorro Standard Time, and can contact Louella Navarrete at louella.navarrete@us.af.mil or TSgt Benjamin Albers at Benjamin.albers@us.af.mil for further information.
    Plane Skates
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Air Force's 48th Equipment Maintenance Squadron, is seeking proposals for the procurement of a Plane Skate system to be delivered to RAF Lakenheath in the United Kingdom. This procurement aims to replace existing aircraft disabled wheel dollies that have caused damage to aircraft, thereby enhancing operational efficiency and safety at the military installation. The contractor will be responsible for the integration, oversight, and quality assurance of the Plane Skate system, which must meet specific requirements including a weight capacity of 100,000 lbs and various operational features. Interested vendors must submit their quotes by September 18, 2024, and direct any inquiries to Rylan Stafford at rylan.stafford@us.af.mil or MSgt Jaime Compean at jaime.compean@us.af.mil by September 11, 2024.
    Bead Breaker
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking quotes for the procurement of a 3MXS Bead Breaker, essential for the maintenance of aircraft wheel assemblies at Joint Base Elmendorf-Richardson (JBER) in Alaska. This equipment is critical for rapidly disassembling aircraft wheels and tire assemblies, specifically for C-17, E-3, and F-22 aircraft, and must meet specific technical requirements including a 60,000 lb capacity and compatibility with wheels up to 22 inches in size. Interested vendors are required to submit their quotes by September 20, 2024, and must ensure compliance with federal procurement guidelines, including maintaining current registrations in the System for Award Management (SAM). For further inquiries, vendors can contact William Gentry at william.gentry.8@us.af.mil or SSgt Jake P Montalbano at jake.montalbano@us.af.mil.
    66--METER,SPECIAL SCALE
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support MECH, is seeking proposals for the procurement of two special scale meters, identified by NSN 7H-6625-017025043. The contract is set aside for small businesses under the Total Small Business Set-Aside (FAR 19.5) and is intended to fulfill specific electrical and electronic properties measuring and testing requirements. This procurement is critical for maintaining operational readiness and ensuring the accuracy of measurement instruments used by the Navy. Interested parties are encouraged to contact Alison N. Bruker at (717) 605-6447 or via email at ALISON.BRUKER@NAVY.MIL for further details, with proposals due within 45 days of the notice publication.
    WEIGHT,LATERAL MASS
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting proposals for the procurement of lateral mass weights. This opportunity falls under the NAICS code 333998, which pertains to miscellaneous general-purpose machinery manufacturing, and is crucial for various defense applications. The government emphasizes the importance of compliance with quality requirements and encourages early and incremental deliveries. Interested vendors can reach out to Carolyn A. Clark at 215-697-1073 or via email at carolyn.a.clark30.civ@us.navy.mil for further details regarding the solicitation process.