ATC G8 Cubicle Office Upgrade

This federal solicitation (W9124C26QA0220003) is issued by the Mission and Installation Contracting Command (MICC) at Fort Jackson, South Carolina, for the ATC G8 Cubicle Office Upgrade. The acquisition is a 100% small business set-aside under NAICS code 337214 (Office Furniture Manufacturing), seeking a single firm-fixed-price contract awarded via the Lowest Price Technically Acceptable (LPTA) source selection process. The scope of work requires the contractor to provide all labor, equipment, and materials to disassemble and transfer 18 existing cubicle workstations from Building 2400 to the G4 DLA Warehouse. Additionally, the contractor must purchase, deliver, and install 12 new cubicle workstations (ten measuring 8' x 10'6" and two measuring 10'9" x 10'6", all with 85" high panel walls) at the G8 directorate office in Building 2400. Important solicitation milestones include a scheduled site visit on September 1, 2026, with RSVPs due by August 28, 2026. The deadline for written questions is September 3, 2026, and final proposals are due by September 11, 2026, at 10:00 AM EST. Proposals must be submitted electronically in four separate volumes: General, Technical, Price, and Past Performance. The required delivery and performance period is four months from the date of award, with all deliveries shipped FOB Destination to Fort Jackson. Evaluation will be based on technical acceptability (covering technical approach, quality control, safety, staffing, and schedule), past performance confidence, and price.

This document is Amendment 0003 for solicitation W9124C26QA022, issued by the Mission and Installation Contracting Command (MICC) at Fort Jackson, South Carolina, for the ATC G8 Cubicle Office Upgrade project. The primary purpose of this amendment is to extend the proposal submission deadline from September 9, 2026, to September 11, 2026, at 10:00 AM EST. Additionally, the amendment incorporates several crucial updates to the solicitation package. It replaces the previous Performance Work Statement (PWS) version 3 with the updated PWS version 4 (dated September 2, 2026) and replaces the previous sample cubicle layout with a revised version. It also updates the Service Contract Act Wage Determination to Revision 34 and officially incorporates a three-page Questions and Answers (Q&A) document. All other terms and conditions of the original solicitation remain unchanged. Offerors must acknowledge receipt of this amendment prior to the revised submission deadline.

This document details the Questions and Answers (Q&A) for Solicitation W9124C26QA022, which covers the ATC G8 Cubicle Office Upgrade in Room 114. The project requires procuring 64 wall panels and 12 desk surface attachments to construct 12 new workstations (ten measuring 8’ x 10’6” and two measuring 10’9” x 10’6” with 85-inch high panel walls). Existing overhead storage cabinets, glass sections, and hardware will be reinstalled on the new panels. To accommodate the new layout, the solicitation's proposal due date has been extended to September 11, 2026, at 10:00 AM EST. While a formal Bill of Materials (BOM) or original order details are unavailable, the government has provided an updated sample cubicle layout. Contractors may submit a complete design and conduct self-funded site visits to map out power, data, and connector requirements. The contractor will be responsible for running data lines from the wall jacks to the workstations, as power and data configurations will change once the 85-inch panels are installed.

This federal solicitation (W9124C26QA0220002) is issued by the Mission and Installation Contracting Command (MICC) at Fort Jackson, South Carolina, to procure the "ATC G8 Cubicle Office Upgrade." The procurement is a 100% small business set-aside under NAICS code 337214 (Office Furniture Manufacturing), with a size standard of 1,100 employees. The scope of work involves a non-personal services contract comprising two primary tasks: the disassembly and transfer of 18 existing cubicle workstations from Building 2400 to the G4 DLA Warehouse, and the purchase, delivery, and installation of 12 new cubicle workstations at Building 2400. This is a firm-fixed-price action with a performance lead time of four months from the date of award. Quotes are due by September 9, 2026, at 10:00 AM EST, and must be submitted electronically to Contract Specialist Katharina Wagner and Contracting Officer Tequlia Holmes. A site visit is scheduled for September 1, 2026, requiring an RSVP by August 28, 2026. Proposals must be organized into four volumes: General, Technical, Price, and Past Performance. The government intends to award a single contract using the Lowest Price Technically Acceptable (LPTA) source selection process, evaluating technical acceptability based on the offeror's technical approach, quality control, safety, staffing, and schedule plans.

This Performance Work Statement (PWS) outlines a federal non-personal services contract to upgrade the G8 Directorate office cubicles at the Army Training Center in Fort Jackson, South Carolina. The primary objective is to reconfigure the office layout in Building 2400 (Room 114) to optimize workspace efficiency and improve customer service support. The contractor is responsible for disassembling 18 existing cubicle workstations and transferring 63 panels, 7 door panels, and 18 desk attachments to the G4 DLA warehouse (Building 1901) for storage. Additionally, the contractor must purchase, deliver, and install 12 new, larger cubicle workstations. This installation will utilize 62 newly purchased panels, 12 new desk attachments, and a combination of existing government-furnished components, including 30 panels, 12 door panels, 24 standalone cabinets, and 12 hanging shelves. The project also requires reconfiguring the existing conference room cubicle walls and executing all electrical and internet routing to provide at least three power outlets and one ethernet port per workstation. Contractor requirements include establishing a Quality Control Plan (QCP) within 10 days of award, implementing a Site-Specific Safety Plan, and completing mandatory federal training, including Anti-Terrorism Level I, OPSEC, iWATCH, and Fort Jackson’s unexploded ordnance (UXO) safety video. The contractor must provide all necessary personnel, tools, and transportation to execute these services. Performance will be monitored by the designated Contracting Officer's Representative (COR) under a Quality Assurance Surveillance Plan (QASP).

This Performance Work Statement (PWS) outlines a non-personal services contract for a workspace reconfiguration at the Army Training Center Fort Jackson G8 Office (Building 2400, Room 114). The contractor will disassemble 18 existing cubicle workstations and transfer a portion of the old panels and desk attachments to the G4 DLA warehouse (Building 1901) for storage. Additionally, the contractor must purchase, deliver, and install 12 new, larger cubicle workstations (ten 8’ x 10'6” and two 10’9”x10’6” configurations with 85-inch-high panel walls) using a mix of newly purchased panels, existing door panels, and existing accessories like hanging shelves and cabinets. The installation requires full electrical and network integration, providing at least three power outlets and one Ethernet outlet per workstation. The contractor will also reconfigure the existing G8 conference room layout. Operational requirements include submitting a Quality Control Plan (QCP) within 10 days of contract award and completing mandatory training, including Anti-Terrorism Level I, OPSEC, iWATCH, and Fort Jackson's Unexploded Ordnance (UXO) safety video. Work must be performed during standard contractor support hours (0800 to 1530, Monday through Friday, excluding federal holidays). The contractor is responsible for providing all necessary personnel, tools, and vehicles, as well as submitting Service Contract Reports (SCR) via SAM.gov.

This federal Request for Quote (RFQ), solicitation number W9124C26QA0220004, is issued by the Mission and Installation Contracting Command (MICC) at Fort Jackson, South Carolina. The commercial services solicitation seeks a contractor to perform the ATC G8 Cubicle Office Upgrade. The scope of work is divided into two primary firm-fixed-price line items: 1. The disassembly and transfer of 18 existing cubicle workstations from Building 2400 to the G4 DLA warehouse at Fort Jackson. 2. The purchase, delivery, and installation of 12 new cubicle workstations (ten measuring 8' x 10'6" and two measuring 10'9" x 10'6", both with 85-inch high panel walls) at Building 2601. The acquisition is structured as a 100% small business set-aside under NAICS code 337214 (Office Furniture Manufacturing), with a size standard of 1,100 employees. Proposals must be submitted electronically in four volumes (General, Technical, Price, and Past Performance) by September 14, 2026, at 10:00 AM EST. A site visit is scheduled for September 1, 2026, requiring RSVPs by August 28, 2026. The government intends to award a single contract using the Lowest Price Technically Acceptable (LPTA) source selection process. Technical proposals will be evaluated on an acceptable/unacceptable basis across five factors: technical approach, quality control plan, safety plan, staffing plan, and schedule. Past performance will be assessed for confidence utilizing SAM.gov and CPARS, and the lowest-priced, technically acceptable offeror will be selected for award. Delivery and performance must be completed within four months of the contract award date.

This federal contract modification (Amendment 0004 to Solicitation W9124C26QA022) is issued by the Mission and Installation Contracting Command (MICC) at Fort Jackson, South Carolina. The amendment modifies the requirements for the G8 Office Cubicle Upgrade project, updating the scope to include the disassembly and transfer of 18 existing cubicle workstations from Building 2400 to the G4 DLA warehouse, alongside the purchase, delivery, and installation of 12 new cubicle workstations. Key administrative updates in this amendment include: - Extending the solicitation response deadline from September 11, 2026, to September 14, 2026. - Updating quantities and removing 47-inch panels from Section 3 of the solicitation. - Incorporating supplemental information, revised drawings, and an additional exhibit. - Deleting the previous Performance Work Statement (PWS) version and replacing it with "PWS ATC G8 Office Cubicle Upgrade v5 10 Sep 2026." - Reordering and updating associated contract documents, including Service Contract Act Wage Determination #2015-4429 (Revision 34) and the solicitation's Q&A attachment. All other terms and conditions of the original solicitation remain unchanged.

This Performance Work Statement (PWS) outlines a non-personal services contract to upgrade the G8 Directorate office cubicles in Building 2400 (Room 114) at the Army Training Center, Fort Jackson, South Carolina. The primary objective is to reconfigure the workspace floorplan to improve operations and customer support. The scope of work requires the contractor to disassemble 18 existing cubicle workstations and transfer specific panels and desk attachments to the G4 DLA warehouse (Building 1901) for storage. Additionally, the contractor must purchase, deliver, and install 12 new, larger cubicle workstations. This installation involves integrating newly purchased panels with existing panels, door panels, hanging shelves, and freestanding cabinets. The contractor is also responsible for all associated electrical work, providing at least three power outlets and one routed ethernet connection per workstation, as well as reconfiguring the existing conference room layout. The contractor must maintain an adequate workforce to perform services Monday through Friday from 0800 to 1530. Key administrative deliverables include submitting a Quality Control Plan (QCP) within 10 days of contract award and providing a Site-Specific Safety Plan to Fort Jackson Installation Safety before work begins. Contractor personnel must also complete mandatory government training, including Anti-Terrorism Level I, OPSEC, and Unexploded Ordnance (3Rs) training, and report total labor hours annually through the System for Award Management (SAM).

This federal document is a Department of Labor Register of Wage Determinations (No. 2015-4429, Revision 34, dated August 27, 2026) issued under the Service Contract Act (SCA). It establishes the minimum hourly wages and fringe benefits for various labor categories performing government contracted work in the South Carolina counties of Calhoun, Fairfield, Kershaw, Lexington, Richland, and Saluda. Key provisions and requirements detailed in the document include: - **Wage Rates:** Specifies hourly pay rates across multiple occupational groups, including administrative, automotive, food service, health, information technology, mechanics, protective services, and transportation. - **Fringe Benefits:** Mandates a standard health and welfare benefit of $5.92 per hour (or $5.42 per hour for contracts subject to Executive Order 13706 regarding paid sick leave). It also requires a minimum of eleven paid holidays per year and progressive paid vacation based on length of service. - **Executive Orders:** Outlines compliance rules for EO 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage for Federal Contractors). - **Special Pay Differentials:** Details additional pay criteria, including night and Sunday premiums for air traffic controllers, and hazardous duty differentials of 4% to 8% for employees working with explosives or ordnance. - **Uniform Allowances:** Establishes guidelines for employer-provided uniforms and maintenance reimbursements. - **Conformance Process:** Outlines the formal procedure (using Standard Form 1444) for establishing wage rates for necessary labor classifications not explicitly listed in the determination.

This document is Amendment 0002 to Solicitation W9124C26QA022 for the ATC G8 Cubicle Office Upgrade at Fort Jackson, South Carolina, issued by the Mission and Installation Contracting Command (MICC). The primary purpose of this amendment is to extend the response due date from August 21, 2026, to September 9, 2026. Additionally, the amendment updates instructions to offerors, scheduling a mandatory site visit RSVP by August 28, 2026, with the actual site visit taking place on September 1, 2026. All subsequent questions regarding the solicitation must be submitted in writing by September 3, 2026. Proposals must be submitted electronically in four distinct volumes: 1. **Volume I (General):** Includes the signed SF 1449, representations, certifications, and an executive summary. 2. **Volume II (Technical Proposal):** Limited to 25 pages, containing a detailed technical approach and a complete parts list. 3. **Volume III (Price):** Completed pricing schedule on the SF 1449 with unit and extended prices. 4. **Volume IV (Past Performance):** Evaluated directly by the government via SAM.gov and CPARS, requiring no physical page submissions from the offeror. Proposals must adhere to strict formatting guidelines, including page limits and font size restrictions, or risk having non-compliant pages excluded from evaluation. All communications and submissions must be directed to Contract Specialist Katharina Wagner and Contracting Officer Tequlia Holmes.