Maintenance Support Device-Version 4 Rugged and Light (MSD-V4R and MSD-V4L) System
ID: W15QKN24R0069Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK ACC-PICAPICATINNY ARSENAL, NJ, 07806-5000, USA

NAICS

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals (334515)

PSC

ELECTRICAL AND ELECTRONIC PROPERTIES MEASURING AND TESTING INSTRUMENTS (6625)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/18dbd9b558b24e6a8a4fd2e4bea9e492/view
Timeline
    Description

    The U.S. Army seeks maintenance support for its testing equipment, specifically the Maintenance Support Device-Version 4 Rugged and Light (MSD-V4R and MSD-V4L) Systems, used by maintenance personnel at military bases. These portable and modular testing systems enhance the Built-in Test/Built-In Test Equipment capabilities and are integral to the Army's operations. The procurement is planned as a single award ID/IQ contract with a five-year duration and a minimum order of 40 First Article Test units. The formal solicitation is anticipated to be released around August 2024, with key contacts provided for further information.

    Point(s) of Contact
    DONNA GILL-CADOGANContracting Officer
    (520) 669-7630
    donna.v.gill-cadogan.civ@army.mil
    David S. GordonContract Specialist
    (520) 669-8347
    david.s.gordon26.civ@army.mil
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Maintenance Support Device-Version 4 Rugged and Light (MSD-V4R and MSD-V4L) System
    Currently viewing
    Presolicitation
    Similar Opportunities
    Handheld Radio Test Set
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Contracting Command - Redstone (ACC-RSA), is seeking sources for a handheld Radio Test Set intended to replace the existing AN/PRM-36 model as part of the Test Equipment Modernization (TEMOD) Program. The new test set must be lightweight, portable, and capable of operating under various environmental conditions while meeting or exceeding the baseline functions outlined in the draft Purchase Description TEMOD-23-02. This procurement is critical for standardizing the U.S. Army's inventory of General Purpose Electrical Test Equipment (GPETE) and ensuring operational readiness for military communications. Interested manufacturers should submit their responses, including the Independent Evaluation Plan Questionnaire, to Ms. Martha White by October 12, 2024, at 4:00 PM Central Standard Time, with a projected solicitation release in February 2025 and contract award in November 2025.
    Maintenance and Repair of Manufacturing Equipment and Systems used in Explosive and Non-Explosive Operational Environments
    Active
    Dept Of Defense
    The Department of Defense, specifically the Crane Army Ammunition Activity, is seeking proposals for the maintenance and repair of manufacturing equipment and systems used in both explosive and non-explosive operational environments under solicitation number W519TC-24-Q-MESS. The procurement aims to ensure operational readiness and safety by requiring contractors to provide labor, materials, and tools to restore equipment to original equipment manufacturer (OEM) specifications, with a focus on technical expertise in hydraulics, pneumatics, electronics, and automation. This contract is critical for maintaining the functionality of diverse machinery, including lathes and CNC mills, essential for military operations. Proposals are due by September 24, 2024, with questions accepted until September 18, 2024; interested parties should contact Contract Specialist Dora Smith at dora.d.smith5.civ@army.mil or Contracting Officer Bryce Willett at bryce.t.willett.civ@army.mil for further details.
    Miscellaneous Kits for Repair and Maintenance
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking proposals for the acquisition of various miscellaneous kits for repair and maintenance, including items such as portable load banks and safety board kits. This procurement aims to establish an Indefinite Quantity Long-Term Contract with a base period of one year and four optional years, ensuring a reliable supply of essential maintenance equipment. The goods are critical for maintaining operational readiness and supporting various military functions. Interested small businesses are encouraged to submit offers by the solicitation deadline of August 30, 2024, with all inquiries directed to Anna Douglass at ANNA.DOUGLASS@DLA.MIL or by phone at 614-692-2911.
    HH-60W Ux Validator II Test Set Repair
    Active
    Dept Of Defense
    The Department of Defense, specifically the Air Force Life Cycle Management Center, is seeking proposals for the repair and refurbishment of the Ux Validator II Test Set and associated equipment to support the HH-60W helicopter. The procurement aims to ensure the operational readiness and availability of critical test sets used for aircraft maintenance, which are essential for verifying the functionality of various aircraft systems and components. This long-term contract is structured as a ten-year agreement, including a base year and nine optional years, with an estimated quantity of 24 units per year and a required delivery timeframe of 12 months after receipt of funded orders. Proposals are due by 5:00 PM EDT on October 3, 2025, and interested parties should contact Dominique Doyle at Dominique.doyle@us.af.mil or Hillary Souther at Hillary.souther@us.af.mil for further information.
    Calibration/Maintenance of TMET GC/MS Systems
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Contracting Command – Aberdeen Proving Ground, is seeking a contractor to provide a full coverage service agreement for the maintenance and calibration of two Gas Chromatograph/Mass Spectrometer (GC/MS) systems located at the DEVCOM Soldier Center in Natick, Massachusetts. The primary objective of this procurement is to ensure optimal performance and minimize downtime of the GC/MS systems, which are critical for accurate textile testing conducted by the Textile Materials Evaluation Branch. The contract will include annual preventative maintenance visits, software and hardware support from factory-trained engineers, and the provision of calibration certificates and service reports, with a performance period of one base year and three optional years. Interested contractors must submit proposals by 12:00 p.m. EST on September 23, 2024, and can direct inquiries to Chris Welsh at richard.c.welsh2.civ@army.mil or Timothy Konetzny at timothy.m.konetzny.civ@army.mil.
    25--ARM,INTERROGATION,M
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Land and Maritime), is seeking quotes for the procurement of two units of the ARM, INTERROGATION, M (NSN 2590016969401). This solicitation is a Total Small Business Set-Aside, aimed at acquiring vehicular equipment components essential for military operations. The selected vendor will be responsible for delivering the specified items to DLA Distribution within 151 days after order approval. Interested parties must submit their quotes electronically, and any inquiries regarding the solicitation should be directed to the buyer via email at DibbsBSM@dla.mil.
    Maintenance and Repair of Shop Support Equipment
    Active
    Dept Of Defense
    Solicitation DEPT OF DEFENSE is seeking maintenance and repair services for U.S. Government owned Shop Support Equipment in Grafenwöhr, DE-BY, DEU. The contract aims to ensure the proper functioning and upkeep of the equipment used in maintenance and repair shop operations. The estimated quantities may vary, and the award will be given to the lowest priced technically acceptable offeror without discussions. Proposals are due by 1700 Local Time, 13 December 2023. For more information, contact Michael Lane at michael.b.lane16.civ@army.mil or 499641705268759.
    RFeye Spectrum Maintenance Hardware and Software License Renewal and Support
    Active
    Dept Of Defense
    The Department of Defense, specifically the U.S. Army Dugway Proving Ground, is seeking quotes for the renewal and support of RFeye Spectrum Maintenance hardware and software licenses. This procurement aims to ensure the continued operation of the CRFS Monitoring System, which is critical for the West Desert Test Center's Data Sciences Division, by providing necessary maintenance, repair, and training services. The contract emphasizes the importance of maintaining compatibility with existing systems, as alternative equipment would lead to significant costs and delays. Interested vendors must submit their quotes by September 20, 2024, and can contact Nneka Okeke-Stubbs at nneka.okeke-stubbs.civ@army.mil or Paul E. Frailey at paul.e.frailey.civ@army.mil for further information.
    DITMCO Test Consoles service and repair
    Active
    Dept Of Defense
    The Department of Defense, specifically the Army Contracting Command at Letterkenny, is seeking sources for the service and repair of DIT-MCO test consoles, which are critical for various production programs at the Letterkenny Army Depot in Pennsylvania. The procurement aims to identify qualified vendors capable of providing repairs, parts, and upgrades for the electronic test systems that support recapitalization and overhaul operations. This market research will help determine the procurement method, which may include small business set-asides or full and open competition, with responses due by September 30, 2024, at 4:00 PM EST. Interested parties should submit their qualifications and capability statements via email to Michael Pitone at michael.f.pitone.civ@army.mil.
    BPA Equipment Load Testing
    Active
    Dept Of Defense
    The Department of Defense, specifically the 436th Contracting Squadron at Dover Air Force Base (AFB) in Delaware, is seeking sources for a potential Blanket Purchase Agreement (BPA) for equipment load testing services. This opportunity aims to identify responsible small business concerns capable of providing electronic and precision equipment repair and maintenance, as outlined under NAICS Code 811210. The BPA will require contractors to perform scheduled load tests on approximately 190 equipment items annually, ensuring compliance with safety standards and operational readiness for military logistics. Interested parties must submit a Market Survey by September 24, 2024, at 4:00 PM (EST) to both primary contacts, Sydney Hocker and Jordan Bongcayao, via their provided email addresses, and must be registered with the System for Award Management (SAM) to participate in future solicitations.