U.S. Customs and Border Protection Specialty Service Rifle Ammunition
ID: 70B06C24Q00000167Type: Solicitation
Overview

Buyer

HOMELAND SECURITY, DEPARTMENT OFUS CUSTOMS AND BORDER PROTECTIONMISSION SUPPORT CONTRACTING DIVISIONWASHINGTON, DC, 20229, USA

NAICS

Small Arms, Ordnance, and Ordnance Accessories Manufacturing (332994)

PSC

AMMUNITION, THROUGH 30MM (1305)

Original Source

https://sam.gov/opp/515d53f53fcc4381974ca876b26a583b/view
Timeline
    Description

    Solicitation from the Department of Homeland Security, U.S. Customs and Border Protection, is requesting quotes for specialty service rifle ammunition. This ammunition is intended to support the Law Enforcement Safety Compliance (LESC) Directorate. The procurement is for small arms, ordnance, and ordnance accessories manufacturing, with a specific NAICS code of 332994 and PSC code of 1305. The place of performance is Harpers Ferry, West Virginia, United States. Interested parties should refer to RFQ 70B06C24Q00000167 for quote instructions and evaluation factors. The question due date is June 10, 2024, at 10:00am ET, and the quote due date is August 2, 2024, at 2:00pm ET. Please note that due to the workload at the end of Fiscal Year 2024, CBP will not consider an extension of the quote due date.

    Point(s) of Contact
    Jared A. Tritle
    (317) 381-5447
    jared.a.tritle@cbp.dhs.gov
    Lifecycle
    Title
    Type
    U.S. Customs and Border Protection Specialty Service Rifle Ammunition
    Currently viewing
    Solicitation
    Similar Opportunities
    1305--WSNC Law Enforcement Ammunition IDIQ Duty, Training Frangible 9MM and .223 CAL Long Rifle CO: Jeffrey Hansen DOA 5 Years
    Active
    Veterans Affairs, Department Of
    The Department of Veterans Affairs (VA) is issuing a Request for Proposals (RFP) for an Indefinite Delivery Indefinite Quantity (IDIQ) contract to supply ammunition for Law Enforcement Officers (LEOs) across the Western States Network Consortium (WSNC). This procurement specifically seeks service-disabled veteran-owned small businesses (SDVOSBs) to provide newly manufactured 9mm and .223 caliber ammunition, ensuring compliance with all relevant federal, state, and local regulations. The contract has a guaranteed minimum value of $2,000 and a ceiling of $7.5 million over a five-year period, emphasizing the importance of reliable ammunition supply for law enforcement training and duty purposes. Interested contractors should direct inquiries to Contract Officer Jeffrey A. Hansen at jeffrey.hansen2@va.gov, with proposals due following the submission of questions by August 15, 2024.
    5.56mm Long Range Ammunition
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Surface Warfare Center (NSWC) Crane, is seeking proposals for the procurement of 5.56mm Long Range Ammunition (MK262 MOD 1), with a focus on supporting small businesses, including service-disabled veteran-owned enterprises. The procurement encompasses the manufacturing, testing, inspection, packaging, and documentation of the ammunition, adhering to stringent U.S. military specifications and compliance with International Traffic in Arms Regulations (ITAR). This ammunition is critical for various military applications, ensuring operational readiness and effectiveness. Interested parties must submit their proposals by September 19, 2024, and can contact Shawna Gainey at shawna.y.gainey.civ@us.navy.mil or by phone at 812-227-9623 for further information.
    5.56LE PRESSURE TESTING
    Active
    Justice, Department Of
    The Department of Justice, specifically the Federal Bureau of Investigation (FBI), is seeking qualified small businesses to provide pressure testing services for 5.56 mm NATO and .223 Remington ammunition. The objective of this procurement is to establish standardized specifications for law enforcement ammunition through simultaneous pressure testing using conformal methods and Electronic Pressure Velocity and Action Time (EPVAT) protocols, utilizing a specialized 3-channel pressure testing system. This initiative is crucial for benchmarking industry standards and ensuring the performance and safety of ammunition used by law enforcement agencies. Interested parties must submit their quotes by September 4, 2024, with the contract expected to run from September 13, 2024, to September 12, 2025. For further inquiries, potential contractors can contact Stevon Walker at swalker4@fbi.gov or Anthony Maggert at asmaggert@fbi.gov.
    COMMERCIAL LEAD TRAINING AMMUNITION (CLTA)
    Active
    Homeland Security, Department Of
    The Department of Homeland Security, specifically the Federal Law Enforcement Training Center (FLETC), is seeking manufacturers to provide Commercial Lead Training Ammunition (CLTA) through a solicitation for multiple firm-fixed-price contracts. The procurement aims to fulfill the ammunition needs for FLETC's training programs, which can vary based on student load, with a minimum guarantee of 1,000 rounds per contract per year and a maximum total value of $40 million over the life of the contracts. This ammunition is critical for law enforcement training, ensuring that personnel are equipped with reliable and effective training resources. Interested bidders must submit their proposals by September 3, 2024, at 1:00 PM Eastern Time, and direct any inquiries to Sheryle Wood at sheryle.wood@fletc.dhs.gov.
    Request for Information (RFI) Ammunition (9mm and 5.56mm) to support the Department of Defense Office of Inspector General (DoDIG)
    Active
    Dept Of Defense
    Request for Information (RFI) Ammunition (9mm and 5.56mm) to support the Department of Defense Office of Inspector General (DoDIG) The Department of Defense (DoD) Office of Inspector General (OIG) is seeking qualified vendors to provide 482,500 rounds of ammunition (9mm and 5.56mm). This ammunition will be used to support the Defense Criminal Investigative Service (DCIS) in its investigative and law enforcement duties. The procurement requires new Original Equipment Manufacturer (OEM) items only, with no gray market or counterfeit supplies allowed. The vendor must be an OEM, authorized dealer, authorized distributor, or authorized reseller for the proposed equipment/system. The ammunition will be delivered to 36 continental United States (CONUS) locations. Interested parties are requested to submit their capability statement by 5pm ET on March 22, 2024, to the provided email addresses.
    Chemical Munitions
    Active
    Justice, Department Of
    The Department of Justice, specifically the Federal Bureau of Investigation (FBI), is seeking to procure chemical and smoke munitions through a Request for Quotation (RFQ) under solicitation number DJF-24-1200-PR-0000022. The procurement aims to enhance the FBI's operational capacity by acquiring various defense-related products, including DEF TEC liquids and grenades, exclusively from small business vendors. Bids must be submitted as firm fixed prices, with separate costs for items and shipping, and deliveries are required within 90 days after receipt of order. Interested parties must submit their responses by September 17, 2024, and direct any questions to Brian Ames at bames@fbi.gov by September 10, 2024. This opportunity underscores the FBI's commitment to supporting small businesses while adhering to federal acquisition regulations.
    Remington 870 SPS Marine Magnum shotguns (brand name only)
    Active
    Agriculture, Department Of
    The Department of Agriculture, specifically the Farm Production and Conservation Business Center, is seeking to procure 36 Remington 870 SPS Marine Magnum 12-gauge shotguns through a total small business set-aside solicitation. This procurement aims to replace older firearms that have surpassed their safety lifespan, ensuring operational safety for law enforcement and governmental agencies. The shotguns must meet specific design and performance standards, including features such as a synthetic stock and solid steel receiver, with a delivery deadline set for February 14, 2025. Interested vendors must submit their quotes via email to Kyle Heid by September 12, 2024, and ensure they are registered in SAM.gov under NAICS code 332994 to be eligible for award consideration.
    B32 Projectiles Gen I
    Active
    Dept Of Defense
    The Department of the Army seeks offers for the B32 Projectiles Gen I contract, a total small business set-aside procurement for up to 100,000 units of 7.62x54R B32 Gen I projectiles. Used for testing hard body armor, these projectiles must meet technical requirements outlined in the solicitation document. Offerors are invited to submit a technical description and samples, detailing their ability to deliver ammunition with a focus on achieving an annual target of $150,000 worth of orders. The fixed-price IDIQ contract has a five-year ordering period, with a potential value of up to $1 million. Interested parties should refer to solicitation W91CRB24R0017 for detailed requirements and submission instructions, noting the September 9, 2024 deadline.
    LTC for HANDLE AND FIRING MECHANISM and CONNECTOR BODY, PLUG
    Active
    Dept Of Defense
    The U.S. Department of Defense, specifically the Defense Logistics Agency, is seeking small businesses to manufacture and supply critical gun parts, including handle and firing mechanisms and connector plugs. These components are subject to strict regulations and must meet specific drawings and specifications. The agency anticipates awarding a long-term contract, with potential five-year periods, to supply these parts. Offerors should be aware of export controls on technical data associated with these items. The solicitation will be available in DIBBS around August 23, 2024, and responses are expected within a year. Interested parties should contact Tracy Roberts for more information.
    Weapon Lock Box for FTU
    Active
    Justice, Department Of
    The Federal Bureau of Investigation (FBI) seeks quotes for a small business set-aside contract to supply weapon lock boxes. The one-time, firm-fixed price Indefinite Delivery Indefinite Quantity contract will be awarded to the lowest price technically acceptable offeror for a twelve-month base period, with four one-year options, maxing out at $1,200,000. Quotes must be submitted by 10:00 AM on September 8, 2024, along with a sample lock box, for consideration. The FBI requires a cost-effective and efficient solution to secure weapons, with the potential for long-term use across multiple scenarios. Lock boxes must adhere to clauses on small business utilization and labor standards. This procurement's closing date is September 8, 2024, and further inquiries should be directed to Bryan Lane, Contracting Officer, at bvlane@fbi.gov or 7036328071.