The General Services Administration (GSA) is seeking qualified vendors for the purchase and installation of multiple components on a 2025 Ford F550, as outlined in solicitation RFQ #FTWMCCG63B3039. The project involves the installation of a Knapheide model PGTD-94 platform body, a materials rack, and a Brigade back eye system, with all equipment required to have a manufacturer’s warranty and comply with industry, EPA, and OSHA standards. This procurement is critical for maintaining the operational readiness of GSA's fleet and ensuring safety standards are met. Quotes are due by January 19, 2025, with questions accepted until January 18, 2025; interested vendors should contact William Hofmann at william.hofmann@gsa.gov or via fax at 855-288-5173 for further details.

G63B3039_COMBINED_SYNOPSIS_SOLICITATION.pdf

The General Services Administration (GSA) Federal Acquisition Service, Fleet Services Division, issued a combined synopsis/solicitation (RFQ #FTWMCCG63B3039) for the purchase and installation of multiple components on a 2025 Ford F550. This is a small business set-aside under NAICS code 811111, with a firm fixed-price, service order type. Key requirements include the installation of a Knapheide model PGTD-94 platform body with specific features, a materials rack, and a Brigade back eye system. All equipment must have a manufacturer’s warranty, and repairs must meet industry, EPA, and OSHA standards. Vendors must be properly insured and possess valid business licenses. Quotes are due by January 19, 2025, with questions due by January 18, 2025, and should be submitted via email to WILLIAM.HOFMANN@GSA.GOV or fax 855-288-5173. The award will be based on the lowest price technically acceptable (LPTA) offer from a responsible vendor, with completion expected within 120 days of order receipt. Offerors must be actively registered in SAM and include Representations and Certifications. Payment will be made via Government Purchase Card.

All equipment must be covered by the manufacturer’s warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM).  
BOM:  
Knapheide model PGTD-94 supplied as follows:  
- 9'4" long X 96" wide for Ford 60" CA dual rear wheel chassis  
- 1/8" treadplate floor  
- 54" wide floor cargo area  
- 12 gauge cross sills  
- Gooseneck hitch turnover Ball rated at 30,000 lbs gross trailer weight, 7500 lbs  
tongue weight  
- Class V bumper 3" receiver hitch rated at 18,000 LBS  
- 7-way plug factory wired at rear of the body  
- Front compartment size: 60"H x 35-1/4"L x 18-3/4"D  
- Top compartment size: 9.23"H x 63"L x 18-3/4"D  
- Rear compartment size: 20"H x 24"L x 18-3/4"D  
- Continuous stainless steel hinges  
- 12" slam tailgate  
- LED marker lights and license plate light  
- LED S/T/T and B/U lights with integrated strobes in the rear skirt  
- Ford Installation kit for PGTD body  
- Bulkhead includes risers on both sides of bulkhead to keep pipe from rolling off.  
- Rear pipe rack pockets  
- Workbench bumper with full pass through  
- Knap white finish paint with undercoating  
Materials Rack installed  
- Over-the-cab design  
- 14' total length  
- 1,200 pound capacity  
- Cross bars every 4' minimum  
- Load containment risers at rear, middle, bulkhead and front  
- Heavy duty weld-on 2"x4" stake pocket style tie-down anchors on outside of left  
and right side lateral bars at rear, front and at least every 4' in-between back and  
front  
- Removable rear portion to allow operation with gooseneck trailer  
A.A heavy duty weld on 2x4 steel stake pockets installed  
Install Knapheide model PGTD series platform as follows:  
- Lights  
- Mud flaps  
- (1) fuel spout  
Brigade back eye system installed:  
- 7" monitor  
- (1) camera mounted on the headache rack

Buyer

NAICS

PSC

Original Source