BEQ IAQ Monitor System Bldgs HP295 & WC195

Amendment 0002 for solicitation N40085-26-R-9058 transmits the site visit sign-in sheet and confirms that all other terms and conditions of the solicitation remain unchanged.

This document is Amendment 0001 for solicitation N40085-26-R-9058. Its primary purpose is to establish the schedule and meeting locations for the project's site visit, which is scheduled for Monday, July 20, 2026, at 0900. Attendees are instructed to meet at building HP295 before proceeding to WC195. All other terms and conditions of the original solicitation remain unchanged.

This federal solicitation (No. N40085-26-R-9058) is issued by NAVFAC for the BEQ IAQ Monitor System project at Buildings HP295 and WC195 on MCB Camp Lejeune, North Carolina. Project No. 26-0039 carries an estimated cost range between $500,000 and $1,000,000, with a contract completion timeline of 180 days after award. Proposals are due by 2:00 PM EST on August 12, 2026, and must be submitted to Brandi Porche and Lauren Loconto. The cutoff for Requests for Information (RFIs) is July 29, 2026. Only three pre-selected contractors are eligible to submit proposals: Mechworks Mechanical Contractors, Inc., North State Mechanical, Inc., and R&W Construction Company, Inc. The basis for contract award is lowest price, and proposals will be evaluated based on the combined total of two Exhibit Line Item Numbers (ELINs): ELIN 0001 for work on building HP295, and ELIN 0002 for building WC195. Bid, payment, and performance bonds are required for proposals valued at $150,000 and greater. One qualified person may concurrently serve as Superintendent, Quality Control Manager, and Safety and Health Officer. Wage Determination General Decision Number NC20260010 applies to this building construction project. Offerors are advised that the award is contingent upon the availability of federal funding.

This Statement of Work outlines a federal project to install an Indoor Air Quality (IAQ) monitoring system at Bachelor Enlisted Quarters (BEQ) buildings HP295 and WC195. The selected contractor must supply all materials, labor, equipment, and supervision to install duct-mounted IAQ sensors with BACnet MS/TP communications within the return ductwork. All physical installations must be restricted to mechanical rooms, shafts, or ceiling plenums, keeping them entirely out of occupied barracks living spaces. Additionally, the project requires integrating these sensors with the building's existing system and FX server. This involves installing a new JACE9000 supervisory controller in the existing cabinet and routing a new BACnet MS/TP communication trunk. The integrated system will monitor, map, and program specific data points from each sensor, including carbon dioxide, relative humidity, total volatile organic compounds (TVOC), and particulate matter. The contractor is also responsible for engineering design, submittals, as-built drawings, operations and maintenance (O&M) manuals, project management, and providing a one-year warranty. All work must comply with specified direct digital control and electrical standards. The performance period is 180 calendar days from the Notice to Proceed. Because the BEQ is an active, occupied facility, the contractor must coordinate all schedules with the BEQ S4 and notify tenants at least 14 days before starting work.

This federal contract specification (No. 26-0039) outlines the requirements for the installation of a barracks Indoor Air Quality (IAQ) Monitor System at Marine Corps Base Camp Lejeune, North Carolina. Managed by NAVFAC, the project covers buildings HP295 and WC195, with all work to be completed within 180 calendar days from the Notice to Proceed. The selected contractor must provide all labor, materials, equipment, and supervision to install duct-mounted IAQ sensors in return ductwork. Key requirements include routing necessary conduit, wire, and backboxes strictly within mechanical rooms, shafts, or ceiling plenums to avoid occupied living spaces. Additionally, the contractor will install and integrate a new JACE9000 supervisory controller into the existing building automation system (BAS) cabinet, routing a new BACnet MS/TP communication trunk to map carbon dioxide, humidity, total volatile organic compounds (TVOC), and particulate matter. Administrative and operational guidelines require the contractor to utilize the Electronic Construction and Facility Support Contract Management System (eCMS) for all technical submittals, daily reports, and RFIs. Standard working hours are set from 0730 to 1600, Monday through Friday. Due to the occupied nature of the barracks, work schedules must be coordinated with the BEQ S4 with at least 14 days' notice prior to starting. Contractors must also secure base access via the Defense Biometrics Identification System (DBIDS), comply with unexploded ordnance (UXO) safety protocols, and submit a baseline construction schedule in Primavera P6 format within 30 days of contract award.

This federal government file contains an extensive, comprehensive list of alphanumeric site identifiers, geographic landmarks, and building/facility codes. The document is structured as an index of location identifiers, likely utilized in a government solicitation, regional mapping database, or environmental survey. The dataset begins with prominent geographic features in North Carolina, referencing coastal and marine locations such as the Atlantic Ocean, New River, Stone Bay, Queens Creek, and Chadwick Bay. It also lists specific natural and built water bodies, including Bear Creek, Southwest Creek, Alligator Bay, Old Landfill Pond, and Henderson Pond, alongside localized landmarks like Golf Course Holes (#01 through #18) and designated Parade Fields. The majority of the file is composed of highly specific, localized alphanumeric codes representing military or government facilities, infrastructure nodes, and utility points. These include standard building prefixes and structural identifiers such as: - Military housing, barracks, or training site codes (e.g., FC, BB, TT, G, AS, M, RR, VL, S, SAW, and LCH prefixes) - Facility-specific infrastructure codes (e.g., PP201, WC161, DD104, CR139, and NHR168) - Numerical sequences representing specific building numbers or property assets (ranging from 1 to 7933) This comprehensive inventory serves as a master locator or facility index, most likely supporting a federal Request for Proposal (RFP) or environmental assessment for a military installation or federal property, such as Marine Corps Base Camp Lejeune or Marine Corps Air Station New River in North Carolina.

This document is Amendment 0004 for federal solicitation N40085-26-R-9058, which updates the applicable Davis-Bacon Act Wage Determination to General Decision Number NC20260010 (dated May 18, 2026). The amendment applies to building construction projects located in Onslow County, North Carolina, while leaving all other solicitation terms and conditions unchanged. The revised wage determination outlines prevailing wage rates and fringe benefits for various labor classifications, including ironworkers, pipefitters, electricians, equipment operators, and laborers. It also highlights compliance mandates for Executive Order 13706, which requires federal contractors to provide paid sick leave, and Executive Order 13658, which establishes minimum wage requirements for covered workers. Finally, the document defines standard union, survey, and state-adopted rate identifiers, and details the three-step appeal process for challenging wage decisions through the Department of Labor's Wage and Hour Division.

This document is Amendment 0003 for federal solicitation N40085-26-R-9058, issued by the Department of the Navy. The primary purpose of this amendment is to update the applicable Davis-Bacon Act Wage Determination to General Decision Number NC20260010 (dated 07/28/2026) for building construction in Onslow County, North Carolina. All other terms and conditions of the solicitation remain unchanged. The updated wage determination details the minimum hourly wage rates and fringe benefits for various labor classifications, including ironworkers, pipefitters, heavy equipment operators, painters, plumbers, and laborers. It also outlines compliance requirements for Executive Order 13706 regarding paid sick leave and Executive Order 13658 regarding minimum wage standards for federal contractors. Lastly, the document defines the key identifiers used to establish union and survey-based wage rates and details the multi-step appeal process through the Department of Labor's Wage and Hour Division for challenging or clarifying wage determinations.