The Department of Defense, through the Department of the Air Force office FA8517 AFSC PZAAC, is conducting market research for repair services for the Lantirn ATE 24 signal generator, NSN 6150-01-385-8223KV and part number 717720650-039. The work covers repair of items in the Power Supply Test Station, with projected quantities of two per year as best estimated quantities. The repair strategy is described as a five-year effort continuing through FY31, with performance in Warner Robins, Georgia, and the item identified as an electrical load bank used to replace distributed or dispersed load elements in a power distribution system or electrical network. This is not a solicitation, and interested sources are directed to the listed Air Force contacts, including Cory Harris and Jonathan Spiers, for the market research effort.

The Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to successfully meet the qualification requirements to repair the NSN: 6150-01-385-8223KV, PN: 717720650-039, Signal Generator.

**NOUN                                                NSN                                        P/N**

Generator, Signal                    6150-01-385-8223KV            717720650-039,

This requirement is for repair services.  Our repair services strategy is a 5-year effort and will continue through FY 31.  The projected quantities will be Best Estimated Quantities (BEQ) of 2 per year.

These items are in the Power Supply Test Station.

The electrical Load bank is A set (bank) of electrical elements that are passive (resistive, inductive, capacitive) or active (motors, batteries). They are usually located adjacent to each other to form a consolidated set of any of these elements or any combination of them. A load bank is used to replace distributed or dispersed load elements contained in a power distribution system or electrical network for the purpose of providing a concentrated load. A load bank contains all the essential electrical characteristics necessary to terminate the circuit and functions in the same manner as the load which it is intended to replace. This description necessarily includes a bank of light bulbs or cone heating elements where energy conversion is primarily in the form of heat although visible radiant energy is the natural result of incandescent heating. Load banks are intended to cover a specific range of characteristics and normally operate at dc or at power frequencies 50, 60, or 400 hz ac. Load banks may be uninstrumented or complete with integral instrumentation and may also be furnished as skid or trailer mounted. Excludes test set, electrical (as modified). see also dummy load, electrical.

The Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to successfully meet the qualification requirements to repair the NSN: 6150-01-385-8223KV, PN: 717720650-039, Signal Generator.

**NOUN                                                NSN                                        P/N**

Generator, Signal                    6150-01-385-8223KV            717720650-039,

This requirement is for repair services.  Our repair services strategy is a 5-year effort and will continue through FY 31.  The projected quantities will be Best Estimated Quantities (BEQ) of 2 per year.

These items are in the Power Supply Test Station.

The electrical Load bank is A set (bank) of electrical elements that are passive (resistive, inductive, capacitive) or active (motors, batteries). They are usually located adjacent to each other to form a consolidated set of any of these elements or any combination of them. A load bank is used to replace distributed or dispersed load elements contained in a power distribution system or electrical network for the purpose of providing a concentrated load. A load bank contains all the essential electrical characteristics necessary to terminate the circuit and functions in the same manner as the load which it is intended to replace. This description necessarily includes a bank of light bulbs or cone heating elements where energy conversion is primarily in the form of heat although visible radiant energy is the natural result of incandescent heating. Load banks are intended to cover a specific range of characteristics and normally operate at dc or at power frequencies 50, 60, or 400 hz ac. Load banks may be uninstrumented or complete with integral instrumentation and may also be furnished as skid or trailer mounted. Excludes test set, electrical (as modified). see also dummy load, electrical.

**CONTACT INFORMATION (PRIMARY) - CORY HARRIS****cory.harris.4@us.af.mil**

**CONTACT INFORMATION (SECONDARY) - JONATHAN SPIERS   jonathan.spiers.1@us.af.mil**

**"THIS IS NOT A SOLICITATION. THIS IS FOR MARKET RESEARCH PURPOSES ONLY"**

Repair for Lantirn ATE 24

The Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to successfully meet the qualification requirements to repair the NSN: 6150-01-385-8223KV, PN: 717720650-039, Signal Generator.

**NOUN                                                NSN                                        P/N**

Generator, Signal                    6150-01-385-8223KV            717720650-039,

This requirement is for repair services.  Our repair services strategy is a 5-year effort and will continue through FY 31.  The projected quantities will be Best Estimated Quantities (BEQ) of 2 per year.

These items are in the Power Supply Test Station.

The electrical Load bank is A set (bank) of electrical elements that are passive (resistive, inductive, capacitive) or active (motors, batteries). They are usually located adjacent to each other to form a consolidated set of any of these elements or any combination of them. A load bank is used to replace distributed or dispersed load elements contained in a power distribution system or electrical network for the purpose of providing a concentrated load. A load bank contains all the essential electrical characteristics necessary to terminate the circuit and functions in the same manner as the load which it is intended to replace. This description necessarily includes a bank of light bulbs or cone heating elements where energy conversion is primarily in the form of heat although visible radiant energy is the natural result of incandescent heating. Load banks are intended to cover a specific range of characteristics and normally operate at dc or at power frequencies 50, 60, or 400 hz ac. Load banks may be uninstrumented or complete with integral instrumentation and may also be furnished as skid or trailer mounted. Excludes test set, electrical (as modified). see also dummy load, electrical.

The Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to successfully meet the qualification requirements to repair the NSN: 6150-01-385-8223KV, PN: 717720650-039, Signal Generator.

**NOUN                                                NSN                                        P/N**

Generator, Signal                    6150-01-385-8223KV            717720650-039,

This requirement is for repair services.  Our repair services strategy is a 5-year effort and will continue through FY 31.  The projected quantities will be Best Estimated Quantities (BEQ) of 2 per year.

These items are in the Power Supply Test Station.

The electrical Load bank is A set (bank) of electrical elements that are passive (resistive, inductive, capacitive) or active (motors, batteries). They are usually located adjacent to each other to form a consolidated set of any of these elements or any combination of them. A load bank is used to replace distributed or dispersed load elements contained in a power distribution system or electrical network for the purpose of providing a concentrated load. A load bank contains all the essential electrical characteristics necessary to terminate the circuit and functions in the same manner as the load which it is intended to replace. This description necessarily includes a bank of light bulbs or cone heating elements where energy conversion is primarily in the form of heat although visible radiant energy is the natural result of incandescent heating. Load banks are intended to cover a specific range of characteristics and normally operate at dc or at power frequencies 50, 60, or 400 hz ac. Load banks may be uninstrumented or complete with integral instrumentation and may also be furnished as skid or trailer mounted. Excludes test set, electrical (as modified). see also dummy load, electrical.

**CAGE CODE : 0DRX9**

**CONTACT INFORMATION (PRIMARY) - CORY HARRIS****cory.harris.4@us.af.mil**

**CONTACT INFORMATION (SECONDARY) - JONATHAN SPIERS   jonathan.spiers.1@us.af.mil**

**"THIS IS NOT A SOLICITATION. THIS IS FOR MARKET RESEARCH PURPOSES ONLY"**

Repair for Lantirn ATE 24

Contract Opportunity Analysis

Solicitation Documents

Related Contract Opportunities

Project Timeline

Agency Information

Point of Contact

Place of Performance

Official Sources