59--PENETRATOR ASSEMBLY
ID: N0010422QFA76Type: Presolicitation
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE NAVYNAVSUP WEAPON SYSTEMS SUPPORT MECHMECHANICSBURG, PA, 17050-0788, USA

PSC

CONNECTORS, ELECTRICAL (5935)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/0feed0faa47e4e6584a620c5e5b67445/view
Timeline
    Description

    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of a Penetrator Assembly. This contract requires the assembly to meet stringent specifications and quality assurance standards due to its critical role in shipboard systems, where any failure could result in severe consequences, including personnel injury or loss of life. The procurement is set aside for small businesses, with a deadline for quotes extended to 4:30 PM EST on December 30, 2024. Interested vendors can reach out to Noelle M. Smith at 717-605-3992 or via email at noelle.m.smith10.civ@us.navy.mil for further details.

    Point(s) of Contact
    VINCE MOLESKY, N743.42, PHONE (717)605-3353, EMAIL VINCENT.MOLESKY@NAVY.MIL
    VINCENT.MOLESKY@NAVY.MIL
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    59--PENETRATOR ASSEMBLY
    Currently viewing
    Presolicitation
    59--PENETRATOR ASSEMBLY
    Solicitation
    Similar Opportunities
    59--PENETRATOR,HULL
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is soliciting proposals for the procurement of Hull Penetrators, a critical component used in shipboard systems. The contract requires the manufacture and delivery of specialized penetrator assemblies that meet stringent quality and safety standards, as any defects could lead to severe operational failures and risks to personnel. This procurement is classified as a total small business set-aside, emphasizing the importance of compliance with quality assurance requirements and first article testing. Interested vendors should contact Ashton K. Perry at 717-605-7574 or via email at ashton.k.perry.civ@us.navy.mil for further details, with a final delivery timeline set for 500 days post-contract award.
    20--METER VALVE ASSEMBL
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is soliciting bids for the procurement of 20-meter valve assemblies. The contract requires compliance with stringent quality assurance standards, as the assemblies are critical components used in shipboard systems, where any failure could result in severe consequences, including personnel injury or loss of life. Interested vendors must submit their proposals by the extended deadline of October 12, 2023, and are encouraged to contact Jill Sabol at 717-605-3875 or via email at JILL.SABOL@NAVY.MIL for further information. This procurement is classified as a total small business set-aside, emphasizing the importance of quality control and adherence to specified material certifications.
    UNION ASSY
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of union assemblies under a federal contract. This opportunity involves the manufacturing and supply of items related to hose, pipe, tube, lubrication, and railing fittings, which are critical components in various defense applications. The contract is set aside for small businesses, emphasizing the importance of supporting the small business sector in defense contracting. Interested vendors must submit their proposals by January 2, 2025, and can direct inquiries to Haylea E. Winand at 717-605-2983 or via email at HAYLEA.E.WINAND.CIV@US.NAVY.MIL.
    20--DESURGER ASSEMBLY,F
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting bids for the procurement of Desurger Assembly FWD components. This contract requires the delivery of specialized marine hardware, which is critical for shipboard systems, ensuring operational integrity and safety. The materials involved are classified as Special Emphasis material, necessitating stringent quality control and certification processes to prevent failures that could lead to serious consequences. Interested vendors should contact Scott Youngblood at 717-605-2379 or via email at SCOTT.YOUNGBLOOD@NAVY.MIL for further details, with proposals expected to adhere to the outlined specifications and delivery timelines.
    12--LUBRICATOR ASSEMBLY
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support MECH, is seeking proposals for the procurement of 208 units of a Lubricator Assembly, identified by NSN 7H-1285-011983925. The contract is set aside for small businesses under the Total Small Business Set-Aside (FAR 19.5), and the items will be delivered to two locations: DLA Distribution in New Cumberland, PA, and DLA Distribution San Joaquin in Tracy, CA. This procurement is critical for maintaining operational readiness and support for fire control radar equipment, and interested parties must demonstrate their capability to meet qualification requirements at the time of award. For further inquiries, potential bidders can contact Jacob Davis at (717) 605-4237 or via email at JACOB.T.DAVIS18.CIV@US.NAVY.MIL.
    SELECTOR SET
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting quotes for the procurement of a SELECTOR SET. This contract requires the manufacture of the SELECTOR SET in compliance with specific quality and design standards, including the prohibition of mercury contamination, as the items are intended for use on submarines and surface ships. The procurement is critical for maintaining operational readiness and safety in naval operations. Interested vendors must submit their quotes by February 7, 2025, and can direct inquiries to Taylor Fasching at 717-605-4323 or via email at TAYLOR.FASCHING@NAVY.MIL.
    61--CABLE ASSEMBLY AND
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy, is seeking quotes for the manufacture of six spool assemblies under solicitation number N00104-24-Q-EE83. The procurement involves the production of items identified by NSN 1H-6150-013726267-X3, which are sole-sourced to Peerless Instrument Co Inc, and must be delivered to designated locations in Pennsylvania and California within 90 days of contract award. These cable assemblies are critical components for military applications, emphasizing the importance of compliance with government standards and specifications. Interested vendors must submit their quotes prior to the closing date and can obtain further technical documents and specifications through the designated DOD resources, with primary contact Colin O'Brien available at colin.obrien1@navy.mil or by phone at (717) 605-5769 for additional inquiries.
    SEAL ASSEMBLY
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for the manufacture of the AN/BRA-24 Antenna Seal Assembly, which is critical for use on Navy submarines. The procurement requires adherence to stringent quality and inspection standards, including First Article Testing and compliance with various military specifications and standards. This assembly is vital for ensuring the operational integrity of naval vessels, emphasizing the importance of quality assurance and material specifications, particularly the exclusion of mercury in materials used. Interested contractors should contact Tonya Nearhood at 717-605-1649 or via email at TONYA.NEARHOOD1@NAVY.MIL for further details, with a requested delivery timeline of 300 days post-contract award.
    48--MANIFOLD/STUD ASSY
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support MECH, is seeking proposals for the manufacture of three units of the Manifold/Stud Assembly, identified by NSN 7H-4820-016339107-X3. The procurement requires adherence to the Technical Data Package (TDP) and mandates delivery to two specified locations in Pennsylvania and California within a timeframe to be determined post-contract award. This assembly is crucial for various naval applications, emphasizing the importance of reliable supply sources in maintaining operational readiness. Interested small businesses must submit their proposals, including the completed Request for Proposal (RFP), to the primary contact, Mikelin E. Mackavage, at MIKELYN.MACKAVAGE@NAVY.MIL by the specified closing date, with the solicitation number N00104-25-Q-BA76 available upon request.
    20--INSERT,FACE
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support Mechanical, is soliciting bids for the procurement of an item referred to as "INSERT, FACE." This contract requires the manufacture and supply of this item, adhering to strict quality assurance and inspection standards, including MIL-STD packaging and Government Source Inspection. The goods are critical for naval operations, emphasizing the importance of compliance with design specifications and authorized distribution requirements. Interested vendors must submit their quotes electronically to Matthew Takach at matthew.b.takach.civ@us.navy.mil, ensuring they meet the outlined criteria, including firm-fixed pricing and delivery timelines, with a minimum quote expiration of 90 days.