Notice of Intent to Award a BPA Call Order against The Land Management Integrated Resources BPA (LMIR) for Non-commercial Thinning and Piling for Ochoco National Forest

This detailed information sheet outlines the technical specifications and environmental requirements for the 2026 OCH Non-Commercial Thinning (NCT) and Piling project. Covering the "Dome" and "Slot" management units, the document details silvicultural prescriptions across 436 total acres of pre-commercial thinning (PCT) and 536 total acres of grapple piling. Key technical requirements specify a maximum cut tree diameter at breast height (DBH) of 9 inches for most species (excluding western juniper, which has a 21-inch DBH limit for non-old-growth trees). Spacing guidelines are designated at either 20x20 feet or 24x24 feet. The preferred order of retention for leave trees is Western Larch, followed by Ponderosa Pine, and Douglas-fir. The document mandates strict environmental and seasonal protections. Specific seasonal restrictions are established to protect wildlife, including work suspensions from March 1 to August 31 in select Dome units, and December 1 to May 1 in select Slot units. Additional protective buffers and operational constraints are detailed for Riparian Habitat Conservation Areas (RHCAs) based on stream classifications, with specialized prescriptions for working near mountain mahogany, aspen stands, and active wildlife sites (such as elk calving areas, wolf dens, and raptor nests). Contractors are also required to avoid damaging fences and spring developments during operations.

This document is a Slot Sale Area and Slash Disposal Map for the Paulina Ranger District within the Ochoco National Forest, dated August 6, 2020. It serves as a regulatory and operational guide for a federal timber sale project covering 949 total acres under the Willamette Meridian. The map outlines specific land management and harvesting instructions, including a Provision Table that mandates the protection of National Forest property boundaries, private land, and known survey monuments. It details operating restrictions, such as seasonal harvesting constraints (with specified units restricted from March 1 to August 31 or December 1 to May 1) and road usage regulations requiring coordination with the Forest Service. Silvicultural treatments and logging methods are designated by unit, utilizing Ground Based (GB) logging systems, Individual Tree Mark (ITM), Leave Tree Mark (LTM), and Designation by Description (DXD). The document also establishes strict slash disposal and site restoration requirements, including whole tree yarding, yarding with tops attached, the piling of all construction and landing slash, and the scarification and seeding of landings and temporary roads. Additionally, the map features a comprehensive legend identifying critical environmental and physical boundaries. This includes streamcourse protections, springs, invasive species areas, and specific zones marked for protection (ATP), alongside logistical infrastructure like existing roads, water sources, and material sources.

This document is a federal timber sale contract map and specification sheet for the Dome Sale Area and Slash Disposal project, located in the Paulina Ranger District of the Ochoco National Forest (Willamette Meridian, T. 13 S., T. 14 S., R. 22 E.). Drafted on July 21, 2021, the document serves as a guide for prospective bidders and contractors regarding logging operations, boundary markings, and resource protection. Key components of the document include: - **Contract Specifications**: Details cutting unit designations, including Individual Tree Mark (ITM), Leave Tree Mark (LTM), and Designation by Description (DXD), all utilizing ground-based (GB) logging systems. - **Unit Tables**: Outlines specific acreage, cutting unit (CU) numbers, payment units (PU), and seasonal operating restrictions (e.g., wildlife or resource protection closures ranging from March 1 to August 31). - **Slash Disposal and Land Restoration**: Establishes requirements for whole-tree yarding, slash piling on landings and temporary roads, and the scarification and seeding of skid trails and landings. - **Resource Protection and Logistics**: Identifies protected features such as National Forest property boundaries, land survey monuments, water sources, streamcourses, springs, and existing infrastructure (gates, fences, bridges, and cattle guards). It also notes restrictions on hauling and road usage behind closed gates.

This document is a vicinity map for the Slot Timber Sale, located within the Paulina Ranger District of the Ochoco National Forest in Oregon. Prepared by Christian Benedict on August 10, 2020, the map outlines the geographic boundaries and key transport routes associated with the project area. Notable landmarks and infrastructure featured on the map include Highway 380, Highway 26, County Road 123, Teaters Road, and Forest Service Road 42 (42 RD). The project area is situated near Prineville, Oregon, and is mapped according to the Willamette Meridian, spanning multiple townships (Townships 13, 14, 15, 16, and 17 South) and ranges (Ranges 15 through 23 East). This map serves as a foundational reference for logistics, access, and spatial planning for the federal timber sale.

This USDA Forest Service document (Pacific Northwest Region) outlines mandatory fire protection and suppression requirements for contractors, permittees, and licensees operating on National Forest lands. Applicable annually from April 1 to October 31, the guidelines mandate that operators prepare an approved fire plan, maintain serviceable firefighting tools, and comply with state forestry laws. The document details specific precautionary regulations, including restrictions on smoking and open fires, and requires all power-driven equipment, trucks, and tractors to carry designated fire extinguishers, shovels, and axes. Gasoline power saw operators must carry personal extinguishers and shovels, and all internal combustion engines must have approved spark arresters or vertical exhaust systems. Operations must strictly adhere to the four-level Industrial Fire Precaution Levels (IFPL) schedule, which ranges from Level I (closed season/fire watch required) to Level IV (general shutdown of all operations). Written waivers may be issued by the Contracting Officer under specific low-risk conditions. Additionally, contractors must designate a qualified fire security person to monitor the project area for at least one hour post-shutdown, comply with strict blasting and fuse restrictions, and maintain functional two-way communication facilities (excluding CB radios) capable of reporting any detected fire to the Forest Service within 15 minutes.

This document is a vicinity map for the Dome Timber Sale, located within the Paulina Ranger District of the Ochoco National Forest in Oregon. Prepared by Christian Benedict on July 21, 2021, the map provides geographical context for the timber sale using the Willamette Meridian system. It details specific township and range coordinates, including Townships 12 South through 17 South and Ranges 15 East through 23 East. Key transportation routes and landmarks highlighted on the map include Highway 380, Highway 26, County Road 123, Forest Road 30, and Forest Road 42, which serve as primary access corridors to the project area near Prineville, Oregon.

This Quality Assurance Surveillance Plan (QASP) outlines the procedures and guidelines the USDA Forest Service will use to monitor and evaluate contractor performance for the 2026 Ochoco National Forest NCT and Piling project. The scope of work includes noncommercial thinning on up to 436 acres and fuel rearrangement (hand and grapple piling) on up to 536 acres within the Paulina Ranger District. The QASP establishes key roles, designating the Contracting Officer (CO) as the contract administrator and the Contracting Officer Representative (COR) as the primary evaluator. Contractor performance is measured against specific Performance Requirement Summary (PRS) tasks, including leave tree selection, cut tree execution, slash treatment, grapple pile construction, pullback, tree pruning, and quality control. Most tasks require a minimum Acceptable Quality Level (AQL) of 90%, with deficiencies resulting in required reworks or negative performance evaluations. Surveillance methods consist of informal visual inspections and formal, randomized circular plot inspections (at least one plot per ten acres). The document details technical specifications for tree thinning, species preference (Engelmann spruce, Western larch, Ponderosa pine, and Douglas-fir), road clearing, and pile characteristics (consumability, containment, and location). Performance is ultimately rated on a scale from Exceptional to Unsatisfactory. Appendices include a Detail Data Information Sheet, a PRS table, a Discrepancy Report template, and a Contract Daily Diary form to document compliance and non-performance.

This document is U.S. Department of Labor Wage Determination No. 1977-0079 (Revision 82, dated May 13, 2026) issued under the Service Contract Act. It establishes minimum wage rates and fringe benefits for federal contracts involving forestry and logging services across 36 specified counties in Oregon. Hourly wage rates are defined for various specialized occupations, ranging from $12.91 for slash pilers/burners and tree climbers to $35.61 for fallers/buckers. Other listed positions include brush/precommercial thinners ($20.04), forestry equipment operators ($23.41), and forestry technicians ($25.80). In addition to base wages, the determination mandates specific fringe benefits: * **Health & Welfare:** $5.55 per hour (up to 40 hours per week), or $5.09 per hour for contracts subject to Executive Order 13706 (Paid Sick Leave). * **Paid Sick Leave:** Under EO 13706, covered contractors must provide 1 hour of paid sick leave for every 30 hours worked, up to 56 hours annually. * **Vacation:** Two weeks of paid vacation after one year of service, increasing to three weeks after ten years. * **Holidays:** A minimum of eleven paid federal holidays per year. * **Uniform Allowance:** Guidelines for contractor-provided uniforms or employee reimbursement ($3.35 per week or $0.67 per day) when required. The document also outlines the conformance process using Standard Form 1444 (SF-1444) for determining appropriate wage rates and classifications for any necessary job titles not explicitly listed in this wage determination.