CGSC Access Control System Replacement

This Performance Work Statement (PWS) outlines the requirements for a non-personnel services contract to perform an Electronic Security System Lifecycle Replacement at the Army University's Command and General Staff College (CGSC) on Fort Leavenworth, Kansas. The primary objectives are to migrate the existing access control and video management systems onto a secure, private network. The scope of work is divided into two main tasks: 1. **Access Control System Migration:** The contractor will replace 19 existing Lenel controllers with Software House/Johnson Controls iSTAR Ultra G2 controllers (or equivalent) across six campus buildings, reducing the active door count to 218. This includes installing FIPS 201-compliant multi-technology card readers with keypads and setting up an enrollment reader at the main security desk to integrate with the Fort Leavenworth C-Cure 9000 server. 2. **Network Video System Replacement:** The contractor will replace the existing Bosch Video Management Solution with a modern, AI-driven Video Management System. The new system must support existing IP cameras, feature 200TB of usable RAID-6 storage, and be pre-hardened for FIPS 140-2 and Army STIG compliance. Advanced analytics, including facial recognition and license plate reading, are required. To qualify, the contractor must be a certified integrator for the Software House C-Cure 9000 system and the proposed video solution. Key personnel, including the Program Manager and technicians, must be U.S. citizens and hold specific technical certifications. The contractor is responsible for quality control, safety, and completing mandatory security and cybersecurity training.

This government document provides a detailed bill of materials and equipment inventory for security, access control, and surveillance systems across a federal facility. It outlines specific quantities and part numbers required to support three primary security components: Intrusion Detection Systems (IDS), Access Control Systems, and Camera Systems. The Intrusion Detection Systems portion details control panels, balanced magnetic switches, motion sensors, and duress buttons designated for secure facilities, command offices, secure offices, communications rooms, and library spaces. The Access Control section specifies components integrated with the Army U Campus Lenel Access Control System, including intelligent dual reader controllers, interface modules, gate operators, card readers, and database software licenses, alongside standalone C-CURE system equipment. The Camera System inventory lists a comprehensive suite of Bosch IP dome, PTZ, and panoramic cameras, mounting hardware, network video recorders, and Bosch Video Management System (BVMS) software licenses, including specialty software for license plate recognition (LPR). This comprehensive equipment list serves as a technical specification sheet for upgrading, expanding, or maintaining physical security infrastructure, ensuring compliance with federal security standards through standardized, high-grade hardware and integrated software solutions.

This combined synopsis/solicitation is a Request for Quote (RFQ) issued by the Army Mission and Installation Contracting Command (MICC) at Fort Leavenworth, Kansas. Solicitation W91QF4-26-Q-A040 seeks a contractor to perform the CGSC Access Control System Replacement. This procurement is set aside entirely for small businesses under NAICS code 561621 (Security Systems Services) with a size standard of $25 million. The project is structured into firm-fixed-price Contract Line Items (CLINs) covering physical access control replacements across multiple buildings on site, including CARL and GIF (CLIN 0001), Lewis and Clark (CLIN 0002), and three optional locations: Truesdell, Flint, and Muir. The government has up to 90 days after the initial contract award to exercise these optional CLINs. The planned period of performance is from September 30, 2026, through June 30, 2027. Interested offerors must submit a technical checklist (limited to five pages), a project milestone schedule, a project completion narrative, and a completed pricing schedule. Submissions must be emailed directly to the Contracting Officer, Robert M. Parvin. Evaluation will be conducted using the Lowest Price Technically Acceptable (LPTA) source selection process, assessing the offeror's technical approach, project schedule, and price reasonableness. Past performance will not be evaluated. Eligible contractors must be active in the System for Award Management (SAM) prior to award, and personnel must meet military installation security and training requirements, including obtaining a Common Access Card (CAC) or local credentials.

This document consists of a highly detailed, annotated architectural floor plan layout, typically utilized in government solicitation packages (RFPs) to define facility spaces, spatial relationships, and equipment zoning. The floor plan outlines a multi-functional government facility featuring distinct operational zones. Key areas identified include an administrative sector containing numerous individual offices, conference rooms, a copy room, and reception lobbies. A media and educational wing is detailed with a library, resource center, computer (PC) repair shop, studio, control room, projection room, and an auditorium. Additionally, the facility incorporates a dining and support area equipped with a dining room, food preparation zone, serving area, and freezer storage. Logistical and utility support spaces are distributed throughout, showing dedicated storage rooms, utility (UTIL) closets, mailboxes, loading docks, elevators, elevator equipment rooms, and circulation stairwells (UP). In the context of federal or state RFPs, this schematic serves as a technical reference for bidders to understand the physical environment, assisting in projects related to facilities management, space planning, systems installation, or building modernization.

This document consists of a highly detailed architectural floor plan diagram, likely extracted from a government facility construction, renovation, or space utilization RFP. The layout depicts a multi-room educational or institutional wing, featuring a prominent library and reading room area alongside multiple classrooms, projection rooms, private offices, lounges, storage spaces, utility areas, and corridors. Stairwells and elevator shafts indicate a multi-level structure with vertical transit points. This schematic serves as a technical reference to define the spatial requirements, facility layout, and scope of work for upcoming physical upgrades, space programming, or maintenance services.

This document is a detailed architectural floor plan diagram depicting a facility layout, typically utilized as an attachment or exhibit in government solicitations (RFPs) for construction, renovation, space planning, or facility maintenance services. The floor plan illustrates a multi-room layout divided into distinct functional zones. The left and central portions of the layout are designated primarily for educational and academic administrative use, featuring multiple classrooms (such as G304, G305, G306, G310, and G314), project rooms (PROJ RM), and a concentrated cluster of individual offices (spanning G360 through G373). The right portion of the layout is dedicated to library, archival, and administrative support spaces. This section includes a large library area (C317), dedicated archives (C321 and C324), circulation spaces, a rare books vault (C335), conference rooms, workrooms, and a central lounge. Vertical circulation points, including elevators, stairs (UP/DN), and open-to-below areas, are positioned throughout to connect the floor to adjacent levels. This spatial schematic serves as a technical reference to define the physical scope of work, room numbering, and square footage boundaries for prospective government contractors.

This document provides a detailed, multi-level architectural floor plan and security layout, likely supporting a federal facility security system installation or modernization project (such as access control, CCTV, or facility management). The document maps out Levels 1 through 4 of a military education or command facility, notably featuring the Command and General Staff College (CGSC) Foundation, Marshall Hall, and the Eisenhower Auditorium. Key details illustrated across the four levels include: - **Level 1:** Key service areas including the Mailroom, Cafeteria, Barber Shop, CGSC Foundation, Classroom Services, Loading Dock, and a Map Room. Security infrastructure is highlighted, denoting specific locations for cameras, card readers, and elevators. - **Level 2:** Administrative and leadership offices including the Department of Tactics (DOET) Help Desk, Senator Roberts Room, Bradley Room, McArthur Room, and service branch offices (USAF, USMC, Navy). It also details the Dean, Chief of Staff (COS), Deputy G3, and G4 office areas, along with access control desks, cameras, and card readers. - **Level 3 & Level 4:** Upper-level academic and department offices, including the Department of Joint, Interagency, and Multinational Operations (DJIMO), Department of Army Tactics (DTAC), Registrar, Quality Assurance Office (QAO), and the Command and General Staff School (CGSS). Each floor plan designates specific locker banks (ranging from 1001 to 4456) and elevator lobbies, establishing a comprehensive spatial reference for facility upgrades, security integration, or hardware installations.

This document is a detailed spatial floor plan layout, likely utilized in a federal, state, or local government RFP or facility modernization project. The plan outlines the spatial configuration, room numbers, and square footage/dimensions of a government administrative or service facility. Key areas identified in the layout include a central corridor structure with numerous individual offices (such as Offices 101 through 147), multiple dedicated conference rooms (Rooms 115 and 116), and utility spaces like a copy room, hub rooms, and various storage areas. Additionally, the facility features essential personnel amenities, including a break room (Room 148), a vending area, a dedicated supply room, and a barber shop (Room 138) with an adjacent waiting area. The layout illustrates a highly compartmentalized design featuring numerous closets, hallways, and stairs/elevators indicated by directional markers. In the context of government contracting, this architectural schematic serves as a foundational reference for facility space planning, maintenance, security upgrades, or physical renovation services.

This document is a text representation of a building floor plan, likely associated with a government facility renovation, space planning, or maintenance RFP. The layout details a second-floor office wing composed primarily of individual office spaces (numbered in the 200s), conference rooms, break rooms, copy rooms, and supply closets. Key structural elements identified in the diagram include: - A series of individual offices ranging from Room 201 to Room 253, each designated with associated square footage or room dimensions (e.g., 193, 188). - Shared administrative and support spaces, including a Conference Room (219), Break Room (242), Copy Room (214), Hub Room (203), and multiple Supply/Storage rooms (207, 222, 245, 250). - Interconnecting hallways, stairwell exits ("DN" for down), janitor closets (JC), and numerous standard closets (CL) distributed throughout the floor to support personnel operations. This spatial layout serves as a technical reference blueprint for contractors bidding on federal, state, or local government solicitations involving facility upgrades, IT cabling, janitorial services, or office relocation and remodeling.

This document is a technical architectural blueprint and floor plan issued by the US Army Corps of Engineers (USACE), Kansas City District, for a federal facility construction or renovation project. Designated as Sheet Number AE101.0, the document displays the Overall Floor Plan (Scale: 1/16" = 1'-0") detailing a building layout that includes classrooms, corridors, telecommunications rooms, offices, a server room, a conference room, elevator equipment, and mechanical areas. In addition to the visual layout and grid lines, the sheet outlines five "General Plan Notes" to guide contractors. These notes specify that dimensions are measured from existing and new gridlines to the finished face of the walls (unless noted otherwise), advise against scaling the drawings, and establish a planning baseline elevation of 100'-0" for the main floor level. Additionally, they mandate that all standard interior partitions and new furring partitions on existing exterior masonry walls must conform to "Type GX" specifications as defined in the project's Partition Type Schedule. This document serves as a critical design and technical reference for bidding and executing construction services under a federal RFP.

This document is a technical architectural floor plan (Sheet AE102.1) for the second floor of Building 315 - Flint Hall, prepared for the U.S. Army Corps of Engineers, Kansas City District. Associated with contract number W912DQ-07-C-0024, the project involves the renovation and repair of buildings for the Civilian Education System. The sheet outlines general plan notes specifying that dimensions are measured from gridlines to the finished faces of walls, and warns against scaling the drawings. It designates a baseline planning elevation of 100'-0" for the main floor level, deferring to the civil engineering package for precise elevations. Standard interior partitions are designated as Type "G1" and new furring partitions on existing exterior masonry walls are designated as Type "G4" unless otherwise specified in the partition type schedule. The accompanying floor plan schematic details specific layout areas, including offices, a conference room, storage spaces, and a stairwell.

This US Army Corps of Engineers (Kansas City District) architectural blueprint details the overall floor plan for the renovation and repair of Muir Hall (Building 285) under Contract No. W912DQ-07-C-0024. The project, designed by Berger Devine Yaeger, focuses on the Civilian Education System facilities. The blueprint (Sheet AE101.0, dated February 27, 2009) outlines Area 1 and Area 2 of the building at a 1/16" = 1'-0" scale. The layout features various functional spaces including multiple classrooms, offices, conference rooms, corridors, telecom rooms, a reception area, a dining area, and mechanical, electrical, and storage facilities.

This document outlines the equipment and labor requirements for the "Army U Access Control Migration to C-Cure" project, provided by Eric Cashin (CAC G-34). The initiative involves upgrading and migrating physical access control and security systems to Software House C-Cure across multiple military facilities, including Lewis & Clark, CARL, GIF, FLINT, MUIR, and Truesdale. Key technical requirements detailed in the document include: - **Access Control Hardware:** Procurement and installation of various iSTAR Ultra G2 controllers (8-door and 16-door models), GSTAR-ACM expansion boards, G2-RM-4E door control modules, and numerous HID PIV Dual Factor (Contact/Contactless) card readers. - **Facility-Specific Upgrades:** The Lewis & Clark facility represents the largest scope, requiring 14 controllers, multiple expansion modules, and a network video controller/recorder replacement featuring an Avigilon NVR6 FIPS server (200TB) and AI integration appliances. Other sites require single controller installations and localized reader upgrades. - **Labor and Services:** Scope of work includes design and project management, site preparation, hardware installation, system programming, provisioning, testing, and commissioning. It also covers migrating existing cameras to the NIPRnet and installing auxiliary hardware such as electric door strikes, door position switches, and request-to-exit sensors at specific locations. This document serves as a structured technical bill of materials and labor breakdown to support a federal procurement or task order for facility security modernization.

This document provides a detailed bill of materials and equipment inventory for security, access control, and surveillance systems at a secure government or military facility. The inventory is categorized into four primary security sectors: Intrusion Detection Systems (IDS), Access Control Systems, Camera (Surveillance) Systems, and Standalone Access Control. The IDS section outlines security components—including control panels, balanced magnetic switches, motion sensors, and duress buttons—designated for high-security zones such as the Secure Facility, Command Offices, Secure Offices, Secure Communications Room, and the CARL Library 3rd Floor. The Access Control section details hardware integrated with the Army U Campus Lenel OnGuard system. This includes intelligent dual reader controllers, interface modules, gate operators, visitor management software, and high-security Veridt Stealth dual card readers compatible with PIV, CAC, and TWIC cards. The Camera System inventory features Bosch fixed dome, panoramic, and PTZ cameras, alongside Bosch Video Management System (BVMS) software licenses, network video recorders, and SecurOS license plate recognition (LPR) software. Finally, the document details standalone access control systems utilizing Software House C-CURE 9000 series licenses, iSTAR controllers, and various access door components, providing a comprehensive technical baseline for facility security upgrades.

This technical document from an OnGuard 8.0 system report, dated September 10, 2026, outlines an access control system conversion project. The report details the transition from an existing security setup to a standardized end-state configuration across multiple federal facilities, including the CARL Library (Building 120), Flint (Building 315), the General Instruction Facility (GIF - Building 120), Muir (Building 117), Truesdell, and the Lewis & Clark (Building 127) facility. The project involves a significant reduction in physical card readers, consolidating the total from 305 existing readers down to 181 after conversion. Key technical specifications detailed in the report include: - **Card Formats:** Standardized support for CAC Extended 200 Bit and CCure 64 Wiegand formats. - **Hardware Integration:** Use of LNL-1320 dual-interface subpanels operating on the Open Supervised Device Protocol (OSDP) to control doors. - **Door Mapping:** Systematic tracking of specific access panels located in telecom closets and server rooms, linking them to classroom, exterior, and interior doors. - **System Notes:** Specific callouts note that retained fourth-floor classrooms in the Lewis & Clark building utilize subpanels controlling four doors each. Ultimately, this document serves as a detailed hardware and routing inventory crucial for security integrators bidding on or executing the physical access control system (PACS) modernization.

This data sheet details Hirsch’s uTrust TS Contact Smart Card (SC) Readers, designed for high-security physical access control systems (PACS) in federal agencies, government contractors, and mission-critical facilities. These intelligent door reader endpoints utilize SmartOS™ technology to support FICAM Card Authentication Key (CAK) and PIV Authentication Key (PAK) certificate checks, reading any PIV-based card with an ISO14443 contactless interface. Compliant with FIPS 201, FIPS 140-2, and NIST SP800-116, the readers offer seamless migration to certified certificate-based validation systems. They are highly interoperable, supporting diverse credentials including PIV, PIV-I, CIV, CAC, PLAID, and various proximity cards. The readers are available in two primary formats: the TS Wall Mount SC and the TS Wall Mount Keypad SC, which supports full two-factor authentication for high-security zones. Technically, the readers support Wiegand and RS-485/OSDP data protocols, with OSDP enabling remote firmware flashing and configuration updates. They operate on 12 VDC, feature an IP53 environmental rating, and are certified under FCC, UL 294, CE, and the GSA Approved Products List (APL). This product line provides a flexible, secure, and compliant solution for government entities seeking to upgrade or establish robust access control infrastructure.

This data sheet details the uTrust TS Government Reader Series by Hirsch (a Johnson Controls brand), presenting a line of intelligent door readers designed for secure federal and government environments. The series includes Mullion, Wallmount, Keypad, and Contact Smart Card configurations supporting single and dual-factor authentication. Engineered for federal compliance, these readers are FICAM-certified for Card Authentication Key (CAK) validation systems and meet FIPS 201, FIPS 140-2, and NIST SP800-116 standards. The versatile platform supports a broad range of credentials, including PIV, PIV-I, CIV, CAC, and legacy proximity cards. Key technical specifications highlight compatibility with 125kHz and 13.56MHz frequencies, SWH OSDP protocols over RS-485, and various physical form factors with UL94 polycarbonate housings. The readers feature weatherproof, illuminated keypads for two-factor authentication, RGB LED status indicators, and remote firmware upgrades via iSTAR. Certifications include FCC, UL 294, CE, and GSA approval, making the series highly suitable for government security integration and facility modernization projects.

This document is a federal Service Contract Act (SCA) Wage Determination (No. 2015-5105, Revision 30, dated August 27, 2026) issued by the U.S. Department of Labor for Kansas and Missouri. It establishes minimum wage rates and fringe benefits for service employees working on federal contracts within specific counties, including Johnson, Leavenworth, Linn, Miami, and Wyandotte in Kansas, and Bates, Caldwell, Cass, Clay, Clinton, Jackson, Lafayette, Platte, and Ray in Missouri. The determination lists hourly pay rates across numerous occupational categories, such as administrative support, automotive services, health, information technology, mechanics, and transportation. Additionally, it outlines mandated fringe benefits, including health and welfare contributions ($5.92 per hour, or $5.42 per hour for contracts subject to Executive Order 13706), a minimum of two weeks of paid vacation after one year of service, and eleven paid federal holidays. The document also provides regulatory guidelines regarding Executive Orders on paid sick leave (EO 13706) and minimum wage (EO 13658), special pay differentials for hazardous duty and shifts (night and Sunday work), uniform allowance reimbursements, and the official conformance process (using Form SF-1444) for establishing rates for unlisted job classifications.

This government document details the official Questions and Answers (Q&A) for solicitation W91QF4-26-Q-A040, which covers the Command and General Staff College (CGSC) Access Control Video System upgrade. The project entails transitioning existing Lenel and Bosch systems to Software House C-Cure 9000 and a new Network Video Recorder (NVR) system across six buildings, totaling 177 doors. Key technical requirements specify that the new NVR must support 30 days of continuous recording at 1 frame per second (fps) during time-lapse and 15 fps during motion-detected alarms. The video system will remain on a locally managed, Closed Restricted Network (CRN), eliminating previously mentioned Department of Defense (DoD) cybersecurity hardening and FIPS 140-2 compliance requirements. Contractors must be authorized vendors, requiring at least one on-site technician with C-Cure 9000 Installer/Maintainer certification and an advanced integrator for server programming. Crucially, the government has removed the new door requirement for Building 225 Truesdale and clarified that fire alarm or mass notification integrations (UFGS 28 31 76) are not applicable. Existing, functional system-agnostic hardware—such as power supplies and locks—will be reused, and the contractor is not responsible for bringing legacy infrastructure up to modern Unified Facilities Guide Specifications (UFGS) standards. Finally, the government will issue an amendment to revise the CLIN structure, requiring offerors to provide separate pricing broken down by individual building.

This Performance Work Statement (PWS) outlines the requirements for a non-personnel services contract to perform an Electronic Security System Lifecycle Replacement at the Command and General Staff College (CGSC) on the Army University campus at Fort Leavenworth, Kansas. The primary objectives are to migrate the existing Lenel OnGuard Access Control System (ACS) to the installation’s Software House C-Cure 9000 system, and to replace the current Bosch Video Management Solution (BVMS) with a modern Network Video Management System (NVMS) featuring artificial intelligence and video analytics. The ACS upgrade involves replacing existing door controllers with Software House iSTAR Ultra G2 and Edge G2 controllers (or equivalents) and installing FIPS 201-compliant multi-technology card readers with keypads across six campus buildings, utilizing a phased building-by-building transition. The NVMS replacement must support existing IP cameras, provide RAID-6 storage redundancy with a minimum 100TB usable capacity (or 30 days of recording), and offer license options for advanced AI analytics such as facial recognition and object tracking. To qualify, the contractor must be a certified integrator for both Software House C-Cure 9000 and the proposed NVMS. Key personnel, including the Program Manager and on-site technicians, must meet strict citizen, background check, and technical certification requirements. Additionally, the contractor is responsible for quality control, operational security, physical key control, and completing mandatory federal and military training, including Anti-Terrorism Level I and Cyber Awareness.