Synopsis - Squad Leader Display Version 3/Maintenance Training Module
Type: Special Notice
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK ACC- DTAWARREN, MI, 48397-5000, USA

NAICS

Military Armored Vehicle, Tank, and Tank Component Manufacturing (336992)

PSC

COMBAT, ASSAULT, AND TACTICAL VEHICLES, WHEELED (2355)

Original Source

https://sam.gov/opp/8e7dbfe688b34268ac498f0adff077da/view
Timeline
    Description

    The Department of Defense, through the United States Army Contracting Command - Detroit Arsenal (ACC-DTA), intends to issue a sole-source solicitation for the Maintenance and Training Module (MTM)/Squad Leader Display Version 3 (SLDv3) specifically for the Stryker Family of Vehicles. This procurement involves a five-year firm-fixed-price (FFP) requirements contract for an estimated quantity of 1,000 units, which are critical for enhancing maintenance training capabilities within the Army. The selected contractor, General Dynamics Land Systems, Inc., will be responsible for delivering these essential components, with the solicitation number W912CH-25-R-0005. Interested parties can reach out to Cera A. Berube at cera.a.berube.civ@army.mil or Marta Furman at marta.furman.civ@army.mil for further information.

    Point(s) of Contact
    Cera A. Berube
    cera.a.berube.civ@army.mil
    Marta Furman
    marta.furman.civ@army.mil
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Synopsis - Squad Leader Display Version 3/Maintenance Training Module
    Currently viewing
    Special Notice
    Similar Opportunities
    FMT DRAFT RFP Request for Feedback
    Buyer not available
    The Department of Defense, specifically the Department of the Army, is seeking feedback on the Draft Request for Proposal (RFP) for the Family of Maintenance Trainers (FMT) project, which aims to enhance maintenance training systems for military platforms. The procurement focuses on providing technology refresh, upgrades, and comprehensive training solutions, ensuring compliance with federal acquisition regulations and promoting standardization across training systems. This initiative is critical for improving military readiness and operational efficiency through advanced training methodologies. Interested parties can direct inquiries to Tristina Patterson at tristina.l.patterson.civ@army.mil or Reginald Caldwell at reginald.k.caldwell.civ@army.mil, with the estimated contract ceiling amount being $396 million over five years, including a two-year optional phase.
    Sources Sought: STEERING GEAR; NSN: 2030-01-505-7562
    Buyer not available
    The Department of Defense, specifically the Army Contracting Command – Detroit Arsenal (ACC-DTA), is seeking information from both small and large businesses regarding their capabilities to produce steering gears (NSN: 2030-01-505-7562, Part No. 885001471A01) for the M916A3 vehicle. This Sources Sought Notice aims to gather insights to inform the acquisition strategy for a potential future contract rather than to solicit proposals. The steering gears are critical components for the operational functionality of military vehicles, emphasizing the importance of quality and reliability in their production. Interested parties are encouraged to submit their responses, including relevant sales materials and a completed questionnaire, by March 21, 2025, while adhering to confidentiality requirements. For further inquiries, respondents may contact Katlyn Marck at katlyn.m.marck.civ@army.mil or Lyndsey Pena at lyndsey.m.pena.civ@army.mil.
    Medical Training Command and Control (MT-C2) Continuation
    Buyer not available
    Sources Sought DEPT OF DEFENSE Medical Training Command and Control (MT-C2) Continuation The U.S. Army Program Executive Office for Simulation Training and Instrumentation (PEO STRI) Joint Project Manager for Medical Modeling and Simulation (JPM MMS) Product Manager, Medical Simulation (PdM MedSim) is seeking potential sources to produce a Medical Training Command and Control (MTC2) System. The MT-C2 System is a control center that will allow remote training platform management within the Army's standardized Medical Simulation Training Centers (MSTCs). The system will enable manipulation of training environments, integration of medical scenarios, control of mannequins, and audio video surveillance and recording. The goal is to provide standardized medical training across all fielded sites. The government is considering small businesses for this requirement.
    Sensor DVE, Sidecar (R) Module Cable Assembly & Camera Set
    Buyer not available
    The Defense Logistics Agency (DLA) is seeking to procure a Digital Vehicle Enhancement (DVE) sensor, a Sidecar Module Cable Assembly, and a camera set, specifically for use in M109A7/M992A3 and Bradley A4 military vehicles. This procurement involves a firm-fixed-price contract with a sole source designation to DRS Network & Imaging Systems LLC, highlighting the critical nature of these components for military operations. The solicitation is expected to be released around February 20, 2025, and interested vendors can access it on FedBizOpps. For further inquiries, potential offerors may contact Muhammad Kah at Muhammad.kah@dla.mil or by phone at 586-467-1203.
    W56HZV-24-R-0020 - PMVS ANTENA WITH CONTAINER
    Buyer not available
    The Department of Defense, through the Department of the Army, is soliciting proposals for a Firm Fixed Price (FFP) contract, numbered W56HZV-24-R-0020, to procure 53 units of the PMVS Antenna Container from Weibel Equipment Inc. This procurement is aimed at supporting the M109 Paladin family of vehicles, which are critical for military operations. The solicitation outlines specific submission requirements, including adherence to strict quality control standards and military-standard packaging, with an expected delivery timeframe of 180 days post-contract award. Interested bidders should contact Rising Oris at rising.oris2.civ@army.mil or 571-588-9362, or Katherine MacFarland at katherine.e.macfarland.civ@army.mil or (571) 588-8902 for further details.
    Mid Range Capability (MRC) Production
    Buyer not available
    The Department of Defense, specifically the Army Contracting Command at Redstone Arsenal, is seeking to acquire a fifth battery for the Mid Range Capability (MRC) weapon system through a sole-source contract with Lockheed Martin Corporation (LMC). This procurement is necessitated by the Army's immediate need for additional Ground Support Equipment (GSE) and is justified under Title 10 U.S.C. 3204(a)(1), as LMC is the only responsible source capable of fulfilling the requirements due to their prior development and production of the first four batteries. The MRC system is critical for enhancing the Army's operational capabilities, and the decision to proceed without full and open competition is based on the lack of comprehensive technical data packages and the significant costs and delays associated with transitioning to another vendor. Interested parties can reach out to LaTasha Y. Porter at latasha.y.porter.civ@army.mil or Thomas B. Mangum at thomas.b.mangum3.civ@mail.mil for further information.
    Market Research Survey Common Tactical Truck
    Buyer not available
    The Department of Defense, specifically the U.S. Army, is conducting a market research survey to identify potential sources for the production of the Common Tactical Truck (CTT) Family of Vehicles. This initiative aims to replace various legacy tactical wheeled vehicles, enhancing operational flexibility in logistics and support for military missions. The CTT will consist of six variants designed with industry-standard technologies to improve safety, efficiency, and performance, while adhering to federal transportation and vehicle safety standards. Interested contractors are invited to participate in a voluntary survey, which includes a comprehensive questionnaire on company capabilities and past performance, with a draft Request for Proposal (RFP) anticipated in September 2025 and a final RFP in the third quarter of fiscal year 2026. For further inquiries, potential respondents can contact the Common Tactical Truck Team at usarmy.detroit.peo-cs-css.mbx.pm-ts-ctt-rfp@army.mil.
    Solicitation, Indicator Digital Display, NSN: 6625-01-609-2815
    Buyer not available
    The Department of Defense, specifically the Department of the Army, is soliciting proposals for the procurement of Indicator Digital Displays, identified by National Stock Number (NSN) 6625-01-609-2815. The contract aims to produce 303 units of the Gunner's Display (GD) for military applications, which are critical for the operation of howitzer systems, ensuring effective communication and functionality in combat environments. Interested contractors must comply with stringent military standards for production, packaging, and testing, with proposals due to the primary contact, Kelli Kavanagh, at kelli.a.kavanagh2.civ@army.mil. The procurement process emphasizes adherence to established specifications and quality assurance protocols, reflecting the government's commitment to maintaining high standards in defense contracting.
    Sources Sought for MD-1386A IMPROVED DATA MODEM MODEL IDM401 MODULES MAINTENANCE SERVICES
    Buyer not available
    The Department of Defense, specifically the Department of the Army, is seeking sources for maintenance services related to the MD-1386A Improved Data Modem Model IDM401 modules. The objective of this procurement is to ensure the effective upkeep and operational readiness of these critical communication devices, which play a vital role in military operations. Interested vendors are encouraged to reach out to the primary contact, Robert Liang, at robert.g.liang.civ@mail.mil, or the secondary contact, Collin Freites, at collin.a.freites.civ@army.mil, for further details regarding the opportunity. The place of performance for this contract will be at Aberdeen Proving Ground in Maryland.
    CY 27 MAAWS Sources Sought
    Buyer not available
    The Department of Defense, specifically the U.S. Army Contracting Command - New Jersey, is seeking information through a Sources Sought Notice for the M3A1 Weapon System, which includes a reusable shoulder-fired recoilless weapon system and associated munitions. The Army requires a fully developed system capable of engaging various targets, equipped with an aiming sight, weighing under 15 lbs, and designed for rugged military operations, with delivery expected within 12 months of production. This procurement is critical for enhancing operational capabilities and may lead to set-asides for small businesses or full competition based on vendor responses. Interested vendors should submit their information by March 27, 2025, via email to Laura Burgos-Magidson or Taylor Albinson, as this notice does not constitute a commitment by the government to award contracts or provide funding.