Request for Information (RFI) Industrial High Temperature Pack Ovens (2)
ID: W911QY-RFI-IndustrialHighTemperaturePackOvens(2)Type: Sources Sought
Overview

Buyer

DEPT OF DEFENSEDEPT OF THE ARMYW6QK ACC-APG NATICKNATICK, MA, 01760-5011, USA

PSC

INDUSTRIAL FURNACES, KILNS, LEHRS, AND OVENS (4430)

Original Source

https://sam.gov/opp/72c012fd34a343f595fff6a19bb1af9a/view
Timeline
    Description

    Request for Information (RFI) Industrial High Temperature Pack Ovens (2) - DEPT OF DEFENSE, DEPT OF THE ARMY

    The DEPT OF DEFENSE, DEPT OF THE ARMY is seeking information on two high temperature pack ovens with specific requirements. These ovens are typically used for industrial purposes and are capable of maintaining a working temperature range of 50-400 Deg C, with a specific requirement of maintaining 310C for 96+ hours. The ovens should have chamber dimensions of 18"Wx18"Dx18"H and 12"Wx12"Dx12"H, with power requirements of 208V Single Phase- 3000W and 1000W respectively. They should also have over temperature protection with independent over temperature protection circuit including a separate high alarm digital temperature controller, magnetic contactor, and independent thermocouples.

    The ovens should have standard features such as a controller with single ramp to set-point & process timer, robust construction, excellent performance & reliability, and a stainless steel liner with stainless steel perforated shelves. The technical specifications include a maximum temperature of 400°C, a minimum temperature of Ambient +60°C, a volume of 28/94 liters, temperature stability of ±0.5°C, temperature uniformity of ±5.0°C, heat-up time of 60 minutes, and recovery time of 10 minutes.

    The dimensions of Oven #1 should be 305 x 305 x 305 mm (12”x12”x12”) internally and 880 x 675 x 885 mm externally. Oven #2 should have dimensions of 455 x 455 x 455 mm (18”x18”x18”) internally and 1010 x 880 x 1120 mm externally. The shelf loading for each oven should be 10 kg, with a total of 20 kg. The maximum power for Oven #1 should be 1000W and for Oven #2 should be 3000W.

    Interested sources are requested to submit product brochures, pictures, and other product literature, along with a 2024 price list with options, estimated delivery time, shipping terms (e.g., FOB Destination), warranty period and pertinent information, spare parts availability time (e.g., 2-8 weeks), and emergency service and/or maintenance information.

    This request for information is for market research purposes only and does not constitute a solicitation or a promise to issue a solicitation in the future. Interested parties should submit their responses to DEVCOM Soldier Center via email by March 15, 2024, 5:00 p.m. EST.

    Point(s) of Contact
    Paul Maguire
    paul.w.maguire.civ@army.mil
    Mary Prebensen
    mary.k.prebensen.civ@army.mil
    Files
    No associated files provided.
    Lifecycle
    Title
    Type
    Request for Information (RFI) Industrial High Temperature Pack Ovens (2)
    Currently viewing
    Sources Sought
    Similar Opportunities
    73--OVEN,WARMING,ELECTR, IN REPAIR/MODIFICATION OF
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking a contractor for the repair and modification of electrical warming ovens, identified by NSN 7R-7310-171271947-P8. The procurement involves a quantity of 13 units, with delivery terms set to FOB Origin, and emphasizes the necessity for FAA-certified parts accompanied by appropriate documentation such as the FAA Authorized Release Certificate. This equipment is crucial for food cooking, baking, and serving operations within military contexts, and the government intends to negotiate with only one source under FAR 6.302-1, although all responsible parties may express their interest and capability within 45 days of this notice. Interested vendors should contact Mackenzie Cannataro at (215) 697-0288 or via email at mackenzie.cannataro@navy.mil for further details.
    73--OVEN,WARMING,ELECTR
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Navy through NAVSUP Weapon Systems Support, is seeking to procure six units of warming ovens under a presolicitation notice. The procurement involves the National Stock Number (NSN) 7R-7310-171271947-P8, with a reference number of 4313100-01-6600, and delivery is required on a Free on Board (FOB) origin basis. These warming ovens are critical for food preparation and service within military operations, emphasizing the importance of reliable cooking and serving equipment. Interested vendors should contact Destiny N. Wiatr at (215) 697-3528 or via email at DESTINY.N.WIATR.CIV@US.NAVY.MIL for further details, and proposals must be submitted within 45 days of this notice for consideration.
    OvenWatch Software **Brand Name Mandatory**
    Active
    Dept Of Defense
    The Department of Defense, through the Naval Surface Warfare Center Indian Head Division (NSWC IHD), is seeking quotes for the procurement of OvenWatch Software, with a mandatory brand name requirement. This solicitation, identified as N0017424R0168, includes the purchase of essential computing equipment, specifically five Dell Servers and associated software licenses, to ensure compliance with current technology standards and operational efficiency. The systems are critical for supporting various defense and security agencies, and the procurement process will follow a lowest price technically acceptable (LPTA) evaluation method. Interested vendors must submit their quotes by September 9, 2024, at 10:00 AM EST, to Deanna Wilson at deanna.l.wilson27.civ@us.navy.mil, ensuring adherence to all specified requirements and regulations.
    Thermal Analysis Equipment
    Active
    Dept Of Defense
    The Department of Defense, through the U.S. Army Contracting Command - New Jersey, is seeking proposals for the procurement of thermal analysis equipment, specifically one High-Temperature Simultaneous Thermal Analyzer (HT STA), one Fourier Transform Infrared Spectrometer (FTIR), and one Graphite Furnace, with options for additional equipment. The primary objective is to acquire new instruments that will facilitate the characterization and heat treatment of materials, ensuring they meet the thermodynamic properties required for advanced munitions applications. This procurement is critical for the development of materials that enable novel capabilities, with stringent requirements outlined for the equipment's performance, including a maximum temperature of 2400°C for STA measurements. Interested vendors should direct inquiries to Roseanne Hooven at roseanne.hooven2.civ@army.mil or Gloria Thoguluva at gloria.thoguluva.civ@army.mil, with the understanding that the solicitation is set aside for small businesses under SBA guidelines.
    Blue M Inert Gas Oven
    Active
    National Aeronautics And Space Administration
    The National Aeronautics and Space Administration (NASA) is seeking quotations for a Blue M Inert Gas Oven, specifically from authorized resellers, to enhance magnetics processing capabilities at the Glenn Research Center in Cleveland, OH. This procurement is critical for producing aerospace power system cores from sensitive materials that require low oxygen levels during high-temperature annealing, necessitating a specialized oven with a 5.8 cuft chamber, robust design, and comprehensive control system. Interested vendors must submit their quotes by September 12, 2024, including a Unique Entity Identifier (UEI) number and lead time for delivery, with payment terms set to net 30. For further inquiries, vendors can contact Jacqueline Townley at jacqueline.e.townley@nasa.gov or by phone at 228-813-6067.
    Forced Air Gas Furnace
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Army, is soliciting proposals for the procurement of four forced air gas furnaces, specifically the Thermo-Cycler Industries GTR-486 or equivalent models, to be delivered to the Sierra Army Depot in Herlong, California. The procurement aims to acquire these furnaces along with optional replacement parts, adhering to strict technical specifications regarding design and performance, and requiring warranties of two years for parts and ten years for the heat exchanger. This acquisition is critical for maintaining operational efficiency at the depot, and the contract will be awarded as a firm-fixed-price arrangement under a total small business set-aside. Interested vendors must submit their proposals, including detailed pricing and compliance documentation, by the specified deadline, and are encouraged to contact Justin Lyu or Tracy Worrell for further information.
    Solicitation Thermal Shock Chamber
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA), is soliciting proposals for a Thermal Shock Chamber to enhance its battery testing capabilities at the Electronics Product Test Center in Columbus, Ohio. The procurement includes a new dual-zone thermal shock chamber with specific temperature ranges, necessary accessories, and two days of training for personnel, all aimed at meeting rigorous testing standards for military applications. This equipment is critical for conducting first article testing on batteries, ensuring compliance with military specifications and supporting defense activities. Interested vendors should submit their offers, including completed representations and certifications, to Adam Steele at Adam.Steele@dla.mil, with the contract expected to be awarded promptly following the submission period.
    Request for Information (RFI), Chamber Evacuator Assembly, NSN: 1015-01-090-8044
    Active
    Dept Of Defense
    The Department of Defense, through the Army Contracting Command - Detroit, is issuing a Request for Information (RFI) for the Chamber Evacuator Assembly, identified by NSN 1015-01-090-8044 and P/N 11579684. This RFI aims to gather insights from potential vendors, both small and large, to inform the government's acquisition strategy for this component, which is critical for military armored vehicles. Interested firms are invited to submit their qualifications, capabilities, and relevant experience by providing essential company details, including DUNS and CAGE codes, by September 9, 2024, to Kaitlyn Fruhner at kaitlyn.n.fruhner.civ@army.mil. It is important to note that this announcement is for market research purposes only and does not constitute a solicitation for proposals or contracts.
    44--HEATER,FLUID,INDUST
    Active
    Dept Of Defense
    The Department of Defense, through the Defense Logistics Agency (DLA Troop Support), is seeking quotes for the procurement of an industrial fluid heater, specifically NSN 4420013066440. The requirement includes a quantity of one unit to be delivered to DLA Distribution within 168 days after order placement, with the approved source being 36024 for part number 115-2343. This equipment is critical for various military applications, ensuring efficient heating processes in operational settings. Interested vendors must submit their quotes electronically, as hard copies will not be accepted, and any inquiries should be directed to the buyer via email at DibbsBSM@dla.mil.
    LO Walk In Freezer
    Active
    Dept Of Defense
    The Department of Defense, specifically the Department of the Air Force, is seeking proposals from qualified small businesses for the procurement of a walk-in freezer, as outlined in solicitation RFQ FA462524Q1120. The requirements include a freezer with dimensions of 12 feet wide, 4 feet deep, and 8 feet tall, capable of maintaining a temperature of -10 degrees Fahrenheit, with the condenser unit installed on top and an overall height limit of 11 feet. This procurement is critical for ensuring reliable refrigeration capabilities at Whiteman Air Force Base in Missouri, supporting operational needs within the facility. Interested vendors must submit their bids, including costs for the freezer, cooling unit, and installation, by September 19, 2024, and direct any questions to Lt Joshua Sturgill or SSgt Ryan Hopkin before the deadline of September 16, 2024.